1. Open the LabVIEW functions palette and select the Mathematics/Polynomial palette.
2. Generate the polynomials enumerated in Prelab la and lb of Experiment 2.1.
Prelab 1a (P1)
Prelab 1b (P2)
P5 = P1P2
Name: ACAYEN, JANNO C. Page Nature of Activity: Score:
Course||Section: BSECE||4B ____ of Date:
____
4. Generate a polynomial whose roots are those stated in Prelab 3 of this experiment.
4 of this experiment.
6. Using the Control Design and Simulation/Control Design/Model Construction palette, construct the two
transfer functions enumerated in Prelab 5.
G1(s)
7. Using the Control Design and Simulation/Control Design/Model Interconnection palette, display the
results of the mathematical operations enumerated in Prelab 5 of this experiment.
G1(s) + G2(s)
G1(s) - G2(s)
G1(s)G2(s)
1.
1.
1.
P3 , P4 P5 Prelab 1.
1. Use MATLAB to find
P6
2. Use only one MATLAB command to find in Prelab 2.
by a polynomial.
4. Use only two MATLAB commands to find G 2 (s ) expressed as factors in the numerator divided by
G2 (s ) G1 ( s ) G2 (s )
can be expressed in polynomial form. Another combination is and both
G6 G7
G8
b.
b. Generate symbolically F(s) shown in Prelab 2. Obtain your result
symbolically in both factored and polynomial forms.