In virtual server, select add new item, then add HTTP port, Command port,TCP port, and
mobile phone port of DVR respectively.
To check the transmission is successful, find IP of WAN in router, as the below picture:
If the setup of ports transmission is correct, then you can visit the device by public network IP, as
below:
To
visit
your
DVR, input http://user id.edvrddns.com:httpport in the browser site column. As the blow
picture:
If your http port is not the default 80,for example 81, please add the port like this:
Enter your user name and password .OK,now you can preview the dvr.
Appendix:
Connection Mode
1.IE connection
Input the dvr ip or domain name in the address bar of IE(if http port is
not 80,you need to add http port),such as
http://192.168.0.10,http://192.168.0.10:81 http://123.edvrddns.com:81.The
user name and password are the same as that you use on dvr.If cant install the IE-
plugin, please open IE--Tools--Internet options--Security--Custom level--ActiveX controls and
plugins--Enable all the items .Click OK to save.
2.CMS connection
3.Mobile connection
domain namenote:dont add prefix http and port.Port is the mobile port
in network in dvr menu.Username and Password are the same like that on dvr.