Anda di halaman 1dari 1

Cabanela, Princess Diane A.

ME - 3105

Portable Bladeless Fan

MATERIALS

1 Old iphone box with cover


Pliers
Plastic Card board
Paper Card Board
1 Bottle cap
Old wire with usb
Pair of scissors
Shoe glue
Glue stick
Glue gun
Cutter
1 switch
Electrical Tape
Spray paint (Black)
1 DC Motor
Ruler
1 Carpet sample
1 Fred Perry tag
Powerbank

PROCEDURE
1. Cut a 1x 2 hole on one side of the old box with its cover using a cutter.
2. Cut a 0.3x1 hole above the first hole.
3. Cut six 0.5x1.5 rectangles using plastic card board.
4. Cut a small hole just about the size of the usb wire below the other side of the
box.
5. Form a circular hole in the middle of the bottle cap about 0.7 in diameter.
6. Glue the four cut rectangles on the sides of the bottle cap to form a mini fan.
7. Place the dc motor inside the hole of the bottle cap. Stick it together using
glue gun.
8. Assemble the switch with the usb wiring.
9. Color the outside of the box using a black spray paint. Wait for it to dry.
10. Stick the dc motor inside the box.
11. Create a hole at the back of the box just above the dc motor and a
rectangular hole below it to create a window for air to come in.
12. Glue the carpet inside to cover up any mess.
13. Make a division inside the box using the Fred Perry tag.
14. Insert the 1/8 of the wire inside its hole and join it with the dc motor. Use
electrical tape to join them together.
15. Place the switch on the second rectangular hole.
16. Test using powerbanks or a laptop.

Anda mungkin juga menyukai