LRFD Simon
Version 10.2.0.0 2017-02-10 12:06
TABLE OF CONTENTS
l Secondary Level Input Parameters
Analysis Results
Section Evaluation
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 2 of 29
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 3 of 29
Span: 1
Point Girder Other DC1 Comp DL Utility FWS
0.0 0.0 0.0 0.0 0.0 0.0
0.1 14.6 105.1 5.2 0.0 16.2
0.2 24.7 177.6 8.8 0.0 27.4
0.3 30.3 217.4 10.8 0.0 33.6
0.4 31.3 224.5 11.1 0.0 34.7
0.5 27.7 199.1 9.9 0.0 30.7
0.6 19.6 140.9 7.0 0.0 21.7
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 4 of 29
Span: 2
Point Girder Other DC1 Comp DL Utility FWS
0.0 -58.2 -418.2 -20.7 0.0 -64.6
0.1 -26.3 -188.6 -9.4 0.0 -29.1
0.2 -1.4 -10.0 -0.5 0.0 -1.6
0.3 16.4 117.5 5.8 0.0 18.1
0.4 27.0 194.0 9.6 0.0 29.9
0.5 30.6 219.5 10.9 0.0 33.9
0.6 27.0 194.0 9.6 0.0 29.9
0.7 16.4 117.5 5.8 0.0 18.1
0.8 -1.4 -10.0 -0.5 0.0 -1.6
0.9 -26.3 -188.6 -9.4 0.0 -29.1
1.0 -58.2 -418.2 -20.7 0.0 -64.6
Span: 1
HL93 USER DEFINED DESIGN VEHICLE ENVELOPE FATIGUE
Point
Maximum Minimum Maximum Minimum Maximum Minimum Maximum Minimum
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
0.1 453.6 -71.6 0.0 0.0 453.6 -71.6 174.7 -26.8
0.2 763.3 -143.2 0.0 0.0 763.3 -143.2 282.2 -53.7
0.3 937.4 -214.8 0.0 0.0 937.4 -214.8 346.5 -80.5
0.4 1017.6 -286.4 0.0 0.0 1017.6 -286.4 364.3 -107.3
0.5 1001.6 -358.0 0.0 0.0 1001.6 -358.0 333.2 -134.2
0.6 910.2 -429.5 0.0 0.0 910.2 -429.5 326.4 -161.0
0.7 716.7 -501.1 0.0 0.0 716.7 -501.1 265.9 -187.8
0.8 441.4 -657.8 0.0 0.0 441.4 -657.8 165.1 -214.6
0.9 195.9 -773.3 0.0 0.0 195.9 -773.3 76.4 -241.5
1.0 157.6 -1050.2 0.0 0.0 157.6 -1050.2 55.8 -280.8
Span: 2
HL93 USER DEFINED DESIGN VEHICLE ENVELOPE FATIGUE
Point
Maximum Minimum Maximum Minimum Maximum Minimum Maximum Minimum
0.0 157.6 -1050.2 0.0 0.0 157.6 -1050.2 55.8 -280.8
0.1 218.2 -639.5 0.0 0.0 218.2 -639.5 89.5 -175.3
0.2 497.6 -464.8 0.0 0.0 497.6 -464.8 192.4 -149.7
0.3 809.7 -363.4 0.0 0.0 809.7 -363.4 312.7 -124.0
0.4 1000.7 -307.2 0.0 0.0 1000.7 -307.2 377.0 -98.3
0.5 1051.1 -251.0 0.0 0.0 1051.1 -251.0 380.5 -72.6
0.6 1000.7 -307.2 0.0 0.0 1000.7 -307.2 377.0 -98.3
0.7 809.7 -363.4 0.0 0.0 809.7 -363.4 312.7 -124.0
0.8 497.6 -464.8 0.0 0.0 497.6 -464.8 192.4 -149.7
0.9 218.2 -639.5 0.0 0.0 218.2 -639.5 89.5 -175.3
1.0 157.6 -1050.2 0.0 0.0 157.6 -1050.2 55.8 -280.8
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 5 of 29
Span: 1
Point Girder Other DC1 Comp DL Utility FWS
0.0 2.8 20.2 1.0 0.0 3.1
0.1 2.1 14.8 0.7 0.0 2.3
0.2 1.3 9.4 0.5 0.0 1.4
0.3 0.5 3.9 0.2 0.0 0.6
0.4 -0.2 -1.5 -0.1 0.0 -0.2
0.5 -1.0 -7.0 -0.3 0.0 -1.1
0.6 -1.7 -12.4 -0.6 0.0 -1.9
0.7 -2.5 -17.9 -0.9 0.0 -2.8
0.8 -3.2 -23.3 -1.2 0.0 -3.6
0.9 -4.0 -28.7 -1.4 0.0 -4.4
1.0 -4.8 -34.2 -1.7 0.0 -5.3
Span: 2
Point Girder Other DC1 Comp DL Utility FWS
0.0 4.7 34.0 1.7 0.0 5.3
0.1 3.8 27.2 1.4 0.0 4.2
0.2 2.8 20.4 1.0 0.0 3.2
0.3 1.9 13.6 0.7 0.0 2.1
0.4 0.9 6.8 0.3 0.0 1.1
0.5 0.0 0.0 0.0 0.0 0.0
0.6 -0.9 -6.8 -0.3 0.0 -1.1
0.7 -1.9 -13.6 -0.7 0.0 -2.1
0.8 -2.8 -20.4 -1.0 0.0 -3.2
0.9 -3.8 -27.2 -1.4 0.0 -4.2
1.0 -4.7 -34.0 -1.7 0.0 -5.3
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 6 of 29
Span: 1
HL93 USER DEFINED DESIGN VEHICLE ENVELOPE FATIGUE
Point
Maximum Minimum Maximum Minimum Maximum Minimum Maximum Minimum
0.0 87.9 -11.9 0.0 0.0 87.9 -11.9 35.0 -4.5
0.1 74.0 -12.2 0.0 0.0 74.0 -12.2 29.1 -4.5
0.2 60.9 -16.5 0.0 0.0 60.9 -16.5 23.5 -5.9
0.3 48.7 -25.0 0.0 0.0 48.7 -25.0 18.4 -9.3
0.4 37.5 -33.7 0.0 0.0 37.5 -33.7 14.2 -12.8
0.5 27.4 -44.8 0.0 0.0 27.4 -44.8 11.0 -16.2
0.6 19.5 -56.9 0.0 0.0 19.5 -56.9 8.0 -20.4
0.7 13.0 -68.7 0.0 0.0 13.0 -68.7 5.4 -24.8
0.8 7.5 -80.2 0.0 0.0 7.5 -80.2 3.1 -30.2
0.9 3.1 -91.2 0.0 0.0 3.1 -91.2 1.4 -35.5
1.0 2.6 -101.4 0.0 0.0 2.6 -101.4 0.9 -40.2
Span: 2
HL93 USER DEFINED DESIGN VEHICLE ENVELOPE FATIGUE
Point
Maximum Minimum Maximum Minimum Maximum Minimum Maximum Minimum
0.0 103.4 -9.7 0.0 0.0 103.4 -9.7 41.3 -3.4
0.1 91.1 -9.8 0.0 0.0 91.1 -9.8 36.1 -3.4
0.2 78.0 -11.3 0.0 0.0 78.0 -11.3 30.4 -4.0
0.3 64.6 -18.5 0.0 0.0 64.6 -18.5 24.6 -6.9
0.4 51.4 -27.3 0.0 0.0 51.4 -27.3 18.9 -10.2
0.5 38.9 -38.9 0.0 0.0 38.9 -38.9 13.8 -13.8
0.6 27.3 -51.4 0.0 0.0 27.3 -51.4 10.2 -18.9
0.7 18.5 -64.6 0.0 0.0 18.5 -64.6 6.9 -24.6
0.8 11.3 -78.0 0.0 0.0 11.3 -78.0 4.0 -30.4
0.9 9.8 -91.1 0.0 0.0 9.8 -91.1 3.4 -36.1
1.0 9.7 -103.4 0.0 0.0 9.7 -103.4 3.4 -41.3
Span: 1
(A) (B) (C) (B+C) (A+B+C)
Point Steel Only Other Composite Total Total
Noncomp DL DL (no DW) (No Steel) (w/ steel)
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 7 of 29
Span: 2
(A) (B) (C) (B+C) (A+B+C)
Point Steel Only Other Composite Total Total
Noncomp DL DL (no DW) (No Steel) (w/ steel)
0.0 0.000 0.000 0.000 0.000 0.000
0.1 0.006 0.041 0.002 0.043 0.049
0.2 0.017 0.122 0.006 0.128 0.146
0.3 0.029 0.207 0.010 0.217 0.246
0.4 0.037 0.268 0.013 0.281 0.319
0.5 0.040 0.290 0.014 0.305 0.345
0.6 0.037 0.268 0.013 0.281 0.319
0.7 0.029 0.207 0.010 0.217 0.246
0.8 0.017 0.122 0.006 0.128 0.146
0.9 0.006 0.041 0.002 0.043 0.049
1.0 0.000 0.000 0.000 0.000 0.000
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 8 of 29
Unless Noted, the 7th Edition (2014) of the AASHTO LRFD Specification is used.
No interims are evaluated.
Span 1
Plate+nSlab Plate+3nSlab
Plate+nSlab Plate+3nSlab
Property Unit Plate Plate+Rebar (Strength (Strength
(Other LS) (Other LS)
LS) LS)
moment_of_inertia in^4 16197 16197 16197 16197 16197 16197
neutral_axis_from_bottom_of_beam in 26.25 26.25 26.25 26.25 26.25 26.25
S to_top_of_top_flange in^3 -617 -617 -617 -617 -617 -617
S to_bottom_of_bottom_flange in^3 617 617 617 617 617 617
S to_top_of_slab in^3 -635 -635 N/A -635 -635
S to_cg_of_reinforcement in^3 N/A
longit_stiffness_parameter in^4 4034
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 9 of 29
Legend:
DL = Total unfactored dead load stress
LL+ = Factored positive live load stress
LL- = Factored negative live load stress
Range = Total factored live load stress range
Negative stresses are compressive
Detailed Information -
Rh Rb Cb Dc My Mu Vu, max Vu, min
(in) (kips-ft) (kips-ft) (kips) (kips)
STRENGTH_I (negative) 1.000 1.000 1.536 25.5 2570.89 -156.2 82.05 -46.37
STRENGTH_I (positive) 1.000 1.000 N/A 25.5 2570.89 2089.3 82.05 -46.37
SERVICE_II (negative) 1.000 N/A N/A 25.5 N/A -10.1 N/A N/A
SERVICE_II (positive) 1.000 N/A N/A 25.5 N/A 1567.1 N/A N/A
FATIGUE_I (negative) N/A N/A N/A N/A N/A -134.2 28.13* -12.91*
FATIGUE_I (positive) N/A N/A N/A N/A N/A 536.4 28.13* -12.91*
FATIGUE_II (negative) N/A N/A N/A N/A N/A -67.1 N/A N/A
FATIGUE_II (positive) N/A N/A N/A N/A N/A 268.2 N/A N/A
CONSTRUCTION (positive) 1.000 N/A 1.112 25.5 2570.89 356.4 3.28 2.11
DECK_POUR_1 (positive) 1.000 N/A 1.109 25.5 2570.89 358.3 3.41 2.19
DECK_POUR_2 (positive) 1.000 N/A 1.113 25.5 2570.89 356.4 3.27 2.10
Legend:
Rh = Hybrid factor
Rb = Web load-shedding factor
Cb = Moment gradient factor
Dc = Depth of web in compression
My = Yield moment
Mu = Total factored moment
Vu, max = Maximum total factored shear (NOTE: this value does not depend on the flexure of the section)
* = This value includes unfactored permanent dead load shear
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 10 of 29
Plate+nSlab Plate+3nSlab
Plate+nSlab Plate+3nSlab
Property Unit Plate Plate+Rebar (Strength (Strength
(Other LS) (Other LS)
LS) LS)
moment_of_inertia in^4 16197 16197 16197 16197 16197 16197
neutral_axis_from_bottom_of_beam in 26.25 26.25 26.25 26.25 26.25 26.25
S to_top_of_top_flange in^3 -617 -617 -617 -617 -617 -617
S to_bottom_of_bottom_flange in^3 617 617 617 617 617 617
S to_top_of_slab in^3 -635 -635 N/A -635 -635
S to_cg_of_reinforcement in^3 N/A
longit_stiffness_parameter in^4 4034
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 11 of 29
Legend:
DL = Total unfactored dead load stress
LL+ = Factored positive live load stress
LL- = Factored negative live load stress
Range = Total factored live load stress range
Negative stresses are compressive
Detailed Information -
Rh Rb Cb Dc My Mu Vu, max Vu, min
(in) (kips-ft) (kips-ft) (kips) (kips)
STRENGTH_I (negative) 1.000 1.000 1.536 25.5 2570.89 -263.6 59.40 -66.40
STRENGTH_I (positive) 1.000 1.000 N/A 25.5 2570.89 2170.1 59.40 -66.40
SERVICE_II (negative) 1.000 N/A N/A 25.5 N/A -90.4 N/A N/A
SERVICE_II (positive) 1.000 N/A N/A 25.5 N/A 1627.0 N/A N/A
FATIGUE_I (negative) N/A N/A N/A N/A N/A -168.2 17.01* -23.45*
FATIGUE_I (positive) N/A N/A N/A N/A N/A 543.5 17.01* -23.45*
FATIGUE_II (negative) N/A N/A N/A N/A N/A -84.1 N/A N/A
FATIGUE_II (positive) N/A N/A N/A N/A N/A 271.7 N/A N/A
CONSTRUCTION (positive) 1.000 N/A 1.112 25.5 2570.89 354.6 -2.54 -3.95
DECK_POUR_1 (positive) 1.000 N/A 1.109 25.5 2570.89 357.1 -2.53 -3.94
DECK_POUR_2 (positive) 1.000 N/A 1.113 25.5 2570.89 354.8 -2.62 -4.08
Legend:
Rh = Hybrid factor
Rb = Web load-shedding factor
Cb = Moment gradient factor
Dc = Depth of web in compression
My = Yield moment
Mu = Total factored moment
Vu, max = Maximum total factored shear (NOTE: this value does not depend on the flexure of the section)
* = This value includes unfactored permanent dead load shear
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 12 of 29
Plate+nSlab Plate+3nSlab
Plate+nSlab Plate+3nSlab
Property Unit Plate Plate+Rebar (Strength (Strength
(Other LS) (Other LS)
LS) LS)
moment_of_inertia in^4 16197 16197 16197 16197 16197 16197
neutral_axis_from_bottom_of_beam in 26.25 26.25 26.25 26.25 26.25 26.25
S to_top_of_top_flange in^3 -617 -617 -617 -617 -617 -617
S to_bottom_of_bottom_flange in^3 617 617 617 617 617 617
S to_top_of_slab in^3 -635 -635 N/A -635 -635
S to_cg_of_reinforcement in^3 N/A
longit_stiffness_parameter in^4 4034
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 13 of 29
Legend:
DL = Total unfactored dead load stress
LL+ = Factored positive live load stress
LL- = Factored negative live load stress
Range = Total factored live load stress range
Negative stresses are compressive
Detailed Information -
Rh Rb Cb Dc My Mu Vu, max Vu, min
(in) (kips-ft) (kips-ft) (kips) (kips)
STRENGTH_I (negative) 1.000 1.000 1.478 25.5 2570.89 -720.3 7.51 -141.07
STRENGTH_I (positive) 1.000 1.000 N/A 25.5 2570.89 1527.2 7.51 -141.07
SERVICE_II (negative) 1.000 N/A N/A 25.5 N/A -495.3 N/A N/A
SERVICE_II (positive) 1.000 N/A N/A 25.5 N/A 1140.2 N/A N/A
FATIGUE_I (negative) N/A N/A N/A N/A N/A -268.3 -12.28* -56.47*
FATIGUE_I (positive) N/A N/A N/A N/A N/A 435.8 -12.28* -56.47*
FATIGUE_II (negative) N/A N/A N/A N/A N/A -134.2 N/A N/A
FATIGUE_II (positive) N/A N/A N/A N/A N/A 217.9 N/A N/A
CONSTRUCTION (positive) 1.000 N/A 1.750 25.5 2570.89 134.0 -16.49 -25.65
DECK_POUR_1 (positive) 1.000 N/A 1.750 25.5 2570.89 137.9 -16.40 -25.51
DECK_POUR_2 (positive) 1.000 N/A 1.750 25.5 2570.89 134.0 -16.49 -25.65
Legend:
Rh = Hybrid factor
Rb = Web load-shedding factor
Cb = Moment gradient factor
Dc = Depth of web in compression
My = Yield moment
Mu = Total factored moment
Vu, max = Maximum total factored shear (NOTE: this value does not depend on the flexure of the section)
* = This value includes unfactored permanent dead load shear
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 14 of 29
14 6.10.8.1.2 0.280 Flexural Resistance: discretely braced flange in tension, Negative Flexure
14 6.10.2.2-1 0.667 Top flange b/(2*t) <= 12.0
14 6.10.2.2-2 0.708 Top flange b >= D/6
14 6.10.2.2-3 0.550 Top flange t >= 1.1*tw
14 6.10.2.2-1 0.667 Bottom flange b/(2*t) <= 12.0
14 6.10.2.2-2 0.708 Bottom flange b >= D/6
14 6.10.2.2-3 0.550 Bottom flange t >= 1.1*tw
14 6.10.9.3.2 0.255 Nominal Shear Resistance of Stiffened Web Interior Panel
14 6.10.5.3 0.103 Special Fatigue Requirement for Webs
14 6.6.1.2 0.571 Fatigue-I: Bottom Flange Base Metal - Cat A
14 6.6.1.2 0.571 Fatigue-I: Top Flange Base Metal - Cat A
14 6.6.1.2 0.831 Fatigue-I: Bottom Flange/Web Fillet Weld - Cat B
14 6.6.1.2 0.831 Fatigue-I: Top Flange/Web Fillet Weld - Cat B
14 6.6.1.2 1.000 Fatigue-I: Trans Stiff Weld near Bottom Flange - Cat C'
14 6.6.1.2 1.000 Fatigue-I: Trans Stiff Weld near Top Flange - Cat C'
14 6.6.1.2 0.831 Fatigue-I: Conn Pl at Bot Flange (Bolted) - Cat B
14 6.6.1.2 0.831 Fatigue-I: Conn Pl at Top Flange (Bolted) - Cat B
informational Minimum User Bottom Flange Thickness Encountered.
informational Minimum User Top Flange Thickness Encountered.
Plate+nSlab Plate+3nSlab
Plate+nSlab Plate+3nSlab
Property Unit Plate Plate+Rebar (Strength (Strength
(Other LS) (Other LS)
LS) LS)
moment_of_inertia in^4 16197 16197 16197 16197 N/A N/A
neutral_axis_from_bottom_of_beam in 26.25 26.25 26.25 26.25 N/A N/A
S to_top_of_top_flange in^3 -617 -617 -617 -617 N/A N/A
S to_bottom_of_bottom_flange in^3 617 617 617 617 N/A N/A
S to_top_of_slab in^3 -635 -635 N/A N/A N/A
S to_cg_of_reinforcement in^3 N/A
longit_stiffness_parameter in^4 4034
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 15 of 29
Legend:
DL = Total unfactored dead load stress
LL+ = Factored positive live load stress
LL- = Factored negative live load stress
Range = Total factored live load stress range
Negative stresses are compressive
Detailed Information -
Rh Rb Cb Dc My Mu Vu, max Vu, min
(in) (kips-ft) (kips-ft) (kips) (kips)
STRENGTH_I (negative) 1.000 1.000 1.478 25.5 2570.89 -2556.1 -35.53 -236.27
SERVICE_II (negative) 1.000 N/A N/A 25.5 N/A -1927.0 N/A N/A
FATIGUE_I (negative) N/A N/A N/A N/A N/A -421.2 -44.65* -106.30*
FATIGUE_I (positive) N/A N/A N/A N/A N/A 83.7 -44.65* -106.30*
FATIGUE_II (negative) N/A N/A N/A N/A N/A -210.6 N/A N/A
FATIGUE_II (positive) N/A N/A N/A N/A N/A 41.9 N/A N/A
CONSTRUCTION (negative) 1.000 N/A 1.750 25.5 2570.89 -667.0 -35.10 -54.60
DECK_POUR_1 (negative) 1.000 N/A 1.750 25.5 2570.89 -638.3 -30.15 -46.90
DECK_POUR_2 (negative) 1.000 N/A 1.750 25.5 2570.89 -666.8 -35.10 -54.60
Legend:
Rh = Hybrid factor
Rb = Web load-shedding factor
Cb = Moment gradient factor
Dc = Depth of web in compression
My = Yield moment
Mu = Total factored moment
Vu, max = Maximum total factored shear (NOTE: this value does not depend on the flexure of the section)
* = This value includes unfactored permanent dead load shear
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 16 of 29
Span 2
Plate+nSlab Plate+3nSlab
Plate+nSlab Plate+3nSlab
Property Unit Plate Plate+Rebar (Strength (Strength
(Other LS) (Other LS)
LS) LS)
moment_of_inertia in^4 16197 16197 16197 16197 N/A N/A
neutral_axis_from_bottom_of_beam in 26.25 26.25 26.25 26.25 N/A N/A
S to_top_of_top_flange in^3 -617 -617 -617 -617 N/A N/A
S to_bottom_of_bottom_flange in^3 617 617 617 617 N/A N/A
S to_top_of_slab in^3 -635 -635 N/A N/A N/A
S to_cg_of_reinforcement in^3 N/A
longit_stiffness_parameter in^4 4034
Legend:
DL = Total unfactored dead load stress
LL+ = Factored positive live load stress
LL- = Factored negative live load stress
Range = Total factored live load stress range
Negative stresses are compressive
Detailed Information -
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 17 of 29
Legend:
Rh = Hybrid factor
Rb = Web load-shedding factor
Cb = Moment gradient factor
Dc = Depth of web in compression
My = Yield moment
Mu = Total factored moment
Vu, max = Maximum total factored shear (NOTE: this value does not depend on the flexure of the section)
* = This value includes unfactored permanent dead load shear
SECTION at Span 2, 20.0 Percent (15.00 ft) - [field splice location, no plate change]
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 18 of 29
Plate+nSlab Plate+3nSlab
Plate+nSlab Plate+3nSlab
Property Unit Plate Plate+Rebar (Strength (Strength
(Other LS) (Other LS)
LS) LS)
moment_of_inertia in^4 16197 16197 16197 16197 16197 16197
neutral_axis_from_bottom_of_beam in 26.25 26.25 26.25 26.25 26.25 26.25
S to_top_of_top_flange in^3 -617 -617 -617 -617 -617 -617
S to_bottom_of_bottom_flange in^3 617 617 617 617 617 617
S to_top_of_slab in^3 -635 -635 N/A -635 -635
S to_cg_of_reinforcement in^3 N/A
longit_stiffness_parameter in^4 4034
Legend:
DL = Total unfactored dead load stress
LL+ = Factored positive live load stress
LL- = Factored negative live load stress
Range = Total factored live load stress range
Negative stresses are compressive
Detailed Information -
Rh Rb Cb Dc My Mu Vu, max Vu, min
(in) (kips-ft) (kips-ft) (kips) (kips)
STRENGTH_I (negative) 1.000 1.000 1.585 25.5 2570.89 -830.7 171.55 4.08
STRENGTH_I (positive) 1.000 1.000 N/A 25.5 2570.89 859.1 171.55 4.08
SERVICE_II (negative) 1.000 N/A N/A 25.5 N/A -617.7 N/A N/A
SERVICE_II (positive) 1.000 N/A N/A 25.5 N/A 633.4 N/A N/A
FATIGUE_I (negative) N/A N/A N/A N/A N/A -224.6 73.00* 21.40*
FATIGUE_I (positive) N/A N/A N/A N/A N/A 288.6 73.00* 21.40*
FATIGUE_II (negative) N/A N/A N/A N/A N/A -112.3 N/A N/A
FATIGUE_II (positive) N/A N/A N/A N/A N/A 144.3 N/A N/A
CONSTRUCTION (negative) 1.000 N/A 1.750 25.5 2570.89 -16.0 32.48 20.88
DECK_POUR_1 (negative) 1.000 N/A 1.750 25.5 2570.89 -23.1 32.48 20.88
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 19 of 29
DECK_POUR_2 (negative) 1.000 N/A 1.750 25.5 2570.89 -16.0 32.48 20.88
Legend:
Rh = Hybrid factor
Rb = Web load-shedding factor
Cb = Moment gradient factor
Dc = Depth of web in compression
My = Yield moment
Mu = Total factored moment
Vu, max = Maximum total factored shear (NOTE: this value does not depend on the flexure of the section)
* = This value includes unfactored permanent dead load shear
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 20 of 29
Plate+nSlab Plate+3nSlab
Plate+nSlab Plate+3nSlab
Property Unit Plate Plate+Rebar (Strength (Strength
(Other LS) (Other LS)
LS) LS)
moment_of_inertia in^4 16197 16197 16197 16197 16197 16197
neutral_axis_from_bottom_of_beam in 26.25 26.25 26.25 26.25 26.25 26.25
S to_top_of_top_flange in^3 -617 -617 -617 -617 -617 -617
S to_bottom_of_bottom_flange in^3 617 617 617 617 617 617
S to_top_of_slab in^3 -635 -635 N/A -635 -635
S to_cg_of_reinforcement in^3 N/A
longit_stiffness_parameter in^4 4034
Legend:
DL = Total unfactored dead load stress
LL+ = Factored positive live load stress
LL- = Factored negative live load stress
Range = Total factored live load stress range
Negative stresses are compressive
Detailed Information -
Rh Rb Cb Dc My Mu Vu, max Vu, min
(in) (kips-ft) (kips-ft) (kips) (kips)
STRENGTH_I (negative) 1.000 1.000 1.000 25.5 2570.89 -420.4 124.77 -23.93
STRENGTH_I (positive) 1.000 1.000 N/A 25.5 2570.89 1807.2 124.77 -23.93
SERVICE_II (negative) 1.000 N/A N/A 25.5 N/A -241.9 N/A N/A
SERVICE_II (positive) 1.000 N/A N/A 25.5 N/A 1352.5 N/A N/A
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 21 of 29
FATIGUE_I (negative) N/A N/A N/A N/A N/A -173.2 49.26* 3.29*
FATIGUE_I (positive) N/A N/A N/A N/A N/A 510.5 49.26* 3.29*
FATIGUE_II (negative) N/A N/A N/A N/A N/A -86.6 N/A N/A
FATIGUE_II (positive) N/A N/A N/A N/A N/A 255.3 N/A N/A
CONSTRUCTION (positive) 1.000 N/A 1.000 25.5 2570.89 237.2 18.08 11.62
DECK_POUR_1 (positive) 1.000 N/A 1.000 25.5 2570.89 230.1 18.08 11.62
DECK_POUR_2 (positive) 1.000 N/A 1.000 25.5 2570.89 237.2 18.08 11.62
Legend:
Rh = Hybrid factor
Rb = Web load-shedding factor
Cb = Moment gradient factor
Dc = Depth of web in compression
My = Yield moment
Mu = Total factored moment
Vu, max = Maximum total factored shear (NOTE: this value does not depend on the flexure of the section)
* = This value includes unfactored permanent dead load shear
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 22 of 29
Plate+nSlab Plate+3nSlab
Plate+nSlab Plate+3nSlab
Property Unit Plate Plate+Rebar (Strength (Strength
(Other LS) (Other LS)
LS) LS)
moment_of_inertia in^4 16197 16197 16197 16197 16197 16197
neutral_axis_from_bottom_of_beam in 26.25 26.25 26.25 26.25 26.25 26.25
S to_top_of_top_flange in^3 -617 -617 -617 -617 -617 -617
S to_bottom_of_bottom_flange in^3 617 617 617 617 617 617
S to_top_of_slab in^3 -635 -635 N/A -635 -635
S to_cg_of_reinforcement in^3 N/A
longit_stiffness_parameter in^4 4034
Legend:
DL = Total unfactored dead load stress
LL+ = Factored positive live load stress
LL- = Factored negative live load stress
Range = Total factored live load stress range
Negative stresses are compressive
Detailed Information -
Rh Rb Cb Dc My Mu Vu, max Vu, min
(in) (kips-ft) (kips-ft) (kips) (kips)
STRENGTH_I (negative) 1.000 1.000 1.000 25.5 2570.89 -182.3 68.08 -68.08
STRENGTH_I (positive) 1.000 1.000 N/A 25.5 2570.89 2216.5 68.08 -68.08
SERVICE_II (negative) 1.000 N/A N/A 25.5 N/A -31.4 N/A N/A
SERVICE_II (positive) 1.000 N/A N/A 25.5 N/A 1661.3 N/A N/A
FATIGUE_I (negative) N/A N/A N/A N/A N/A -108.9 20.70* -20.70*
FATIGUE_I (positive) N/A N/A N/A N/A N/A 570.8 20.70* -20.70*
FATIGUE_II (negative) N/A N/A N/A N/A N/A -54.5 N/A N/A
FATIGUE_II (positive) N/A N/A N/A N/A N/A 285.4 N/A N/A
CONSTRUCTION (positive) 1.000 N/A 1.000 25.5 2570.89 350.1 0.00 0.00
DECK_POUR_1 (positive) 1.000 N/A 1.000 25.5 2570.89 343.1 0.00 0.00
DECK_POUR_2 (positive) 1.000 N/A 1.000 25.5 2570.89 350.3 0.00 0.00
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 23 of 29
Legend:
Rh = Hybrid factor
Rb = Web load-shedding factor
Cb = Moment gradient factor
Dc = Depth of web in compression
My = Yield moment
Mu = Total factored moment
Vu, max = Maximum total factored shear (NOTE: this value does not depend on the flexure of the section)
* = This value includes unfactored permanent dead load shear
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 24 of 29
Plate+nSlab Plate+3nSlab
Plate+nSlab Plate+3nSlab
Property Unit Plate Plate+Rebar (Strength (Strength
(Other LS) (Other LS)
LS) LS)
moment_of_inertia in^4 16197 16197 16197 16197 16197 16197
neutral_axis_from_bottom_of_beam in 26.25 26.25 26.25 26.25 26.25 26.25
S to_top_of_top_flange in^3 -617 -617 -617 -617 -617 -617
S to_bottom_of_bottom_flange in^3 617 617 617 617 617 617
S to_top_of_slab in^3 -635 -635 N/A -635 -635
S to_cg_of_reinforcement in^3 N/A
longit_stiffness_parameter in^4 4034
Legend:
DL = Total unfactored dead load stress
LL+ = Factored positive live load stress
LL- = Factored negative live load stress
Range = Total factored live load stress range
Negative stresses are compressive
Detailed Information -
Rh Rb Cb Dc My Mu Vu, max Vu, min
(in) (kips-ft) (kips-ft) (kips) (kips)
STRENGTH_I (negative) 1.000 1.000 1.585 25.5 2570.89 -420.4 23.93 -124.77
STRENGTH_I (positive) 1.000 1.000 N/A 25.5 2570.89 1807.2 23.93 -124.77
SERVICE_II (negative) 1.000 N/A N/A 25.5 N/A -241.9 N/A N/A
SERVICE_II (positive) 1.000 N/A N/A 25.5 N/A 1352.5 N/A N/A
FATIGUE_I (negative) N/A N/A N/A N/A N/A -173.2 -3.29* -49.26*
FATIGUE_I (positive) N/A N/A N/A N/A N/A 510.5 -3.29* -49.26*
FATIGUE_II (negative) N/A N/A N/A N/A N/A -86.6 N/A N/A
FATIGUE_II (positive) N/A N/A N/A N/A N/A 255.3 N/A N/A
CONSTRUCTION (positive) 1.000 N/A 1.750 25.5 2570.89 237.2 -11.62 -18.08
DECK_POUR_1 (positive) 1.000 N/A 1.750 25.5 2570.89 230.1 -11.62 -18.08
DECK_POUR_2 (positive) 1.000 N/A 1.750 25.5 2570.89 237.2 -11.62 -18.08
Legend:
Rh = Hybrid factor
Rb = Web load-shedding factor
Cb = Moment gradient factor
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 25 of 29
SECTION at Span 2, 80.0 Percent (60.00 ft) - [field splice location, no plate change]
Plate+nSlab Plate+3nSlab
Plate+nSlab Plate+3nSlab
Property Unit Plate Plate+Rebar (Strength (Strength
(Other LS) (Other LS)
LS) LS)
moment_of_inertia in^4 16197 16197 16197 16197 16197 16197
neutral_axis_from_bottom_of_beam in 26.25 26.25 26.25 26.25 26.25 26.25
S to_top_of_top_flange in^3 -617 -617 -617 -617 -617 -617
S to_bottom_of_bottom_flange in^3 617 617 617 617 617 617
S to_top_of_slab in^3 -635 -635 N/A -635 -635
S to_cg_of_reinforcement in^3 N/A
longit_stiffness_parameter in^4 4034
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 26 of 29
Legend:
DL = Total unfactored dead load stress
LL+ = Factored positive live load stress
LL- = Factored negative live load stress
Range = Total factored live load stress range
Negative stresses are compressive
Detailed Information -
Rh Rb Cb Dc My Mu Vu, max Vu, min
(in) (kips-ft) (kips-ft) (kips) (kips)
STRENGTH_I (negative) 1.000 1.000 1.585 25.5 2570.89 -830.7 -4.08 -171.55
STRENGTH_I (positive) 1.000 1.000 N/A 25.5 2570.89 859.1 -4.08 -171.55
SERVICE_II (negative) 1.000 N/A N/A 25.5 N/A -617.7 N/A N/A
SERVICE_II (positive) 1.000 N/A N/A 25.5 N/A 633.4 N/A N/A
FATIGUE_I (negative) N/A N/A N/A N/A N/A -224.6 -21.40* -73.00*
FATIGUE_I (positive) N/A N/A N/A N/A N/A 288.6 -21.40* -73.00*
FATIGUE_II (negative) N/A N/A N/A N/A N/A -112.3 N/A N/A
FATIGUE_II (positive) N/A N/A N/A N/A N/A 144.3 N/A N/A
CONSTRUCTION (negative) 1.000 N/A 1.750 25.5 2570.89 -16.0 -20.88 -32.48
DECK_POUR_1 (negative) 1.000 N/A 1.750 25.5 2570.89 -23.1 -20.88 -32.48
DECK_POUR_2 (negative) 1.000 N/A 1.750 25.5 2570.89 -16.0 -20.88 -32.48
Legend:
Rh = Hybrid factor
Rb = Web load-shedding factor
Cb = Moment gradient factor
Dc = Depth of web in compression
My = Yield moment
Mu = Total factored moment
Vu, max = Maximum total factored shear (NOTE: this value does not depend on the flexure of the section)
* = This value includes unfactored permanent dead load shear
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 27 of 29
14 6.10.4.2.2 0.308 Bottom Flange Service Limit State Permanent Deflections, Positive Flexure
14 6.10.4.2.2 0.300 Top Flange Service Limit State Permanent Deflections, Negative Flexure
14 6.10.4.2.2 0.300 Bottom Flange Service Limit State Permanent Deflections, Negative Flexure
14 6.10.4.2.2 0.240 Compression Flange Service Limit State Bend-Buckling, Negative Flexure
14 6.10.7.2.2 0.334 Flexure, Noncompact, Composite, Positive Flexure, Top Flange
14 6.10.7.2.2 0.334 Flexure, Noncompact, Composite, Positive Flexure, Bottom Flange
14 6.10.7.3 1.173 Flexure - Composite, Positive Flexure, Ductility
14 6.10.1.8 0.334 Net Section Fracture; Check Tension Flange stress against Fy ONLY (Strength-I)
14 6.10.1.8 warning LRFD Simon does not check 0.84 * ( An / Ag ) * Fu (Strength-I)
informational After field splice design, the user must ensure that the An / Ag of the
informational tension flange exceeds 0.284 = ft / ( 0.84 * Fu )
14 6.10.8.2.2 0.323 Flex Resist: discretely braced flange in comp, local buckling, Negative Flexure
14 6.10.8.2.3 0.323 Flex Resist: discretely braced flange in comp, LT buckling, Negative Flexure
14 6.10.8.1.2 0.323 Flexural Resistance: discretely braced flange in tension, Negative Flexure
14 6.10.1.8 0.323 Net Section Fracture; Check Tension Flange stress against Fy ONLY (Strength-I)
14 6.10.1.8 warning LRFD Simon does not check 0.84 * ( An / Ag ) * Fu (Strength-I)
informational After field splice design, the user must ensure that the An / Ag of the
informational tension flange exceeds 0.275 = ft / ( 0.84 * Fu )
14 6.10.2.2-1 0.667 Top flange b/(2*t) <= 12.0
14 6.10.2.2-2 0.708 Top flange b >= D/6
14 6.10.2.2-3 0.550 Top flange t >= 1.1*tw
14 6.10.2.2-1 0.667 Bottom flange b/(2*t) <= 12.0
14 6.10.2.2-2 0.708 Bottom flange b >= D/6
14 6.10.2.2-3 0.550 Bottom flange t >= 1.1*tw
14 6.10.9.3.2 0.310 Nominal Shear Resistance of Stiffened Web Interior Panel
14 6.10.5.3 0.133 Special Fatigue Requirement for Webs
14 6.6.1.2 0.416 Fatigue-I: Bottom Flange Base Metal - Cat A
14 6.6.1.2 0.416 Fatigue-I: Top Flange Base Metal - Cat A
14 6.6.1.2 0.606 Fatigue-I: Bottom Flange/Web Fillet Weld - Cat B
14 6.6.1.2 0.606 Fatigue-I: Top Flange/Web Fillet Weld - Cat B
14 6.6.1.2 0.729 Fatigue-I: Trans Stiff Weld near Bottom Flange - Cat C'
14 6.6.1.2 0.729 Fatigue-I: Trans Stiff Weld near Top Flange - Cat C'
14 6.6.1.2 0.606 Fatigue-I: Conn Pl at Bot Flange (Bolted) - Cat B
14 6.6.1.2 0.606 Fatigue-I: Conn Pl at Top Flange (Bolted) - Cat B
informational Minimum User Bottom Flange Thickness Encountered.
informational Minimum User Top Flange Thickness Encountered.
Plate+nSlab Plate+3nSlab
Plate+nSlab Plate+3nSlab
Property Unit Plate Plate+Rebar (Strength (Strength
(Other LS) (Other LS)
LS) LS)
moment_of_inertia in^4 16197 16197 16197 16197 N/A N/A
neutral_axis_from_bottom_of_beam in 26.25 26.25 26.25 26.25 N/A N/A
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 28 of 29
Legend:
DL = Total unfactored dead load stress
LL+ = Factored positive live load stress
LL- = Factored negative live load stress
Range = Total factored live load stress range
Negative stresses are compressive
Detailed Information -
Rh Rb Cb Dc My Mu Vu, max Vu, min
(in) (kips-ft) (kips-ft) (kips) (kips)
STRENGTH_I (negative) 1.000 1.000 1.585 25.5 2570.89 -2556.1 -22.77 -239.25
SERVICE_II (negative) 1.000 N/A N/A 25.5 N/A -1927.0 N/A N/A
FATIGUE_I (negative) N/A N/A N/A N/A N/A -421.2 -40.50* -107.55*
FATIGUE_I (positive) N/A N/A N/A N/A N/A 83.7 -40.50* -107.55*
FATIGUE_II (negative) N/A N/A N/A N/A N/A -210.6 N/A N/A
FATIGUE_II (positive) N/A N/A N/A N/A N/A 41.9 N/A N/A
CONSTRUCTION (negative) 1.000 N/A 1.750 25.5 2570.89 -667.0 -34.83 -54.18
DECK_POUR_1 (negative) 1.000 N/A 1.750 25.5 2570.89 -638.3 -28.71 -44.66
DECK_POUR_2 (negative) 1.000 N/A 1.750 25.5 2570.89 -666.8 -34.83 -54.18
Legend:
Rh = Hybrid factor
Rb = Web load-shedding factor
Cb = Moment gradient factor
Dc = Depth of web in compression
My = Yield moment
Mu = Total factored moment
Vu, max = Maximum total factored shear (NOTE: this value does not depend on the flexure of the section)
* = This value includes unfactored permanent dead load shear
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017
Page 29 of 29
file:///C:/Users/lu_01/Desktop/final_bridge_interior%20data_output.xml 2/10/2017