Solution phases
* Build the model. PREPROCESSOR
+ Apply loads and
obtain the solution.
+ Review the results. POSTPROCESSOR
SOLUTION
Solution phases
‘saree a
aim ¢——. __ Element Type - select appropiate element type to model
cna the structural response/behaviour most accurately,
Shecig
Se ay Real Constants — properties depending on the element
Bhmneerate '_ type, e.g. cross-sectional properties, area, area moment
Bae Co of inertia
Brasettp Material Props — material properties, e.g. modulus of
sey °
Eten beats elasticity E and Poisson’s ratio
____ Sections — cross-section definition
Modeling - define the geometry of the structure - “itis
essential to make some modeling considerations in
this phase”
Meshing — divide the geometry of the structure into
elements — ‘take care of element distribution/density”Solution phases
Analysis Type — specify the character of the problem
* Eanaiie typo @
isarferntnin
Eten” Define Loads — apply loads to the element model
es: Solve — run the solution process, e.g. for linear static
Se Rs systems solve (Gaussian elimination) for the unknown
displacements: The global stifiness
matrix]
Unknown displacement vector dof = total number of
ndof x 4 nodes x number
| degrees of freedom
eecameanan pernode
Baan
KK} = {R} — {D}= [K]“Y{R}
: vos
Known global Known load vector
stiffness matrix ndof x 1
ndof x ndof