3-Axis
A
allows the camera to be manually as well
l
p
xi
adjustment easy.
sy. •Sim
as moved horizontally and vertically.
s b
Guide Pattern
racke
ea
Service Monitor Cable
t
t
m
n
a
e ke
Owner's Manual Mounting Screw
s a justm
d
INSTALLATION: Ceiling
Color
CCDDome
Camera
2 Drill four holes according to
the guide pattern then insert
anchors into the drilled holes. Model NTSC PAL
Signal System NTSC : 525 Lines PAL : 625 Lines
3 Draw out power / video wires
to the connecting places.
Dome Base Scanning System
Scanning Frequency (H) 15.734kHz
2 : 1 Interlace
15.625kHz
DigitalColor
DSP Dome
4 Fixed the camera to a celling
Scanning Frequency (V)
Image Sensor
59.94Hz
1/3 inch SONY IT CCD
50Hz
color camera
using four screws.
Total / Effective Pixels No. 410K/380K [Normal:270K/250K] 470K/440K[Normal:320K/290K]
Mounting S / N Ratio More than 48dB (AGC Off)
5 Adjust desired focus and scene Screw Resolution 550 TV Lines [High: 480 TV Lines / Normal: 380 TV Lines]
by turning and moving the
3-axis camera bracket by hand. Video Output Level 1.0 Vp-p (75 Ohms, composite)
Lens Fixed Lens (f=2.45mm, 3.8mm, 6mm Selectable)/ Vari-focal Lens
1/3" SONY CCD
Put the dome cover over the Focus Manual
6 base. Sync. System Internal
Sensitivity 0.3 Lux(High)/ 0.1 Lux(Normal)/ 0.1 Lux(Day&Night)/ 0 Lux(IR LED)
P/N:3810-0072B ver.0610E
7 Fix the dome cover on the base Electronic Shutter 1/60 ~ 100,000 Sec. 1 /50 ~ 100,000 Sec.
by covering. LENS .Vari-focal
White Balance Auto .Fixed Lens
Dome Cover
AGC Auto, On / Off (Option)
BLC On / Off (with Slide Switch)
Flickerless On / Off (with Slide Switch)
NOTE Input / Output Connector Power, Video, UTP (Option)
Power Consumption DC 12V (DC 9V~15V) / 3W (Max)
Insert coin to the side (Option : AC 24V/DC 12V) AC 24V (20V~28V) or DC 12V (10V~15V), 5W (Max)
hole and remove the Dome Size (Ø) 100mm Design and specifications are
dome cover by twist coin. Weight Approx. 366g subject to change without notice.
90º
J502
Power - DC 12V a DC Level Adjustment V.R •FL(Flickerless) ON/OFF
#2 (Red)
J501
2 AC24V
•AGC(Auto Gain Control) ON/OFF
! Do not disassemble the camera. •BLC(Back Light Compensation)
There are no user-serviceable parts inside it. No. Function Terminal Color Remark a
ON/OFF
#1 Video Output Yellow 1.0 Vp-p c Service Monitor Connecter:
Use service monitor connector
DC LEVEL
#2 Power Input Red DC 12V(DC9V~15V), Max 3W/ 250mA
VIDEO
05
J5 TELE
Do not drop the camera or subject c to set camera angle & focus
!
UD ER
when installing.
IO
/A EAT
AC 24V
them to physical shocks.
SWITCH
J503
H
1 2 3
ON
It can cause malfunctions to occur. Vari-focal Lens Type BLC ON