Anda di halaman 1dari 2

WWW.DIESELSHIP.

COM 1

OCTOBER 2016
MARINE ELECTROTECHNOLOGY
TIME ALLOWED - 3 HOURS
MORNING PAPER

Instructions

1. Answer SIX questions.


SECTION -1 : Answer at least TWO questions
SECTION -2 : Answer at least TWO questions

2. All questions carry equal marks.


3. Neatness in handwriting and clarity in expression carries weightage
4. Illustration of an answer with clear sketches / diagrams carries weightage
5. All unused pages of answer script must be cancelled out by two lines (X) across the page.
SECTION -I

Q1. With reference to the provision of a shore electrical supply to a ship:


A. Sketch an arrangement for taking A.C. shore supply and checks to be carried out prior Taking shore connection?
B. Describe the method of safely connecting the arrangement sketched in (A) to the shore Supply?
2009/SR7 2009/SR3 2008/SR11 2008/SR9 2007/SR4 2007/SR3 2006/SR6 2011/SR4 2010/SR8
2011/SR3 2012/SR8 2012/SR09 2014/SR03 2014/SR09 2014/SR12 2015/SR08 2015/SR10 2016/SR02
2016/SR10

Q2. With reference to electronic control systems A. Draw a simple block diagram for temperature control B.
Describe each component shown in the diagram in a.
2011/SR9 2010/SR8 2011/SR4 2011/SR1 2010/SR10 2010/SR3 2010/SR4 2011/SR12 2011/SR3
2012/SR09 2014/SR03 2014/SR07 2014/SR09 2015/SR08 2015/SR09 2015/SR10 2016/SR02 2016/SR10

Q3. Diesel electric propulsion is now being chosen as the power plant for an increasingly wide variety of vessels.
Sketch a simple layout of such an installation. Explain the advantages of selecting such a plant.
2011/SR4 2010/SR8 2011/SR1 2012/SR6 2012/SR7 2012/SR09 2014/SR01 2014/SR03 2014/SR4
2014/SR09 2015/SR08 2015/SR10 2016/SR10

Q4. With reference to an emergency source of electrical power in cargo ships:-


Describe a typical power source. B. Give a typical list of essential services, which must be supplied simultaneously
i. Explain how the emergency installation can be periodically tested
2009/SR7 2008/SR9 2007/SR4 2011/SR4 2010/SR8 2011/SR1 2011/SR3 2012/SR6 2012/SR09
2013/SR6 2013/SR10 2014/SR03 2014/SR09 2015/SR02 2015/SR04 2015/SR07 2015/SR08 2015/SR10
2016/SR03 2016/SR09 2016/SR10

Q5. The direct on line start of squirrel cage motor is used for most electrical drives on a.c. powered. Ships Describe
with sketches as necessary one method of overcoming each of the following Problems: A. High starting current;
B. Low starting torque.
2009/SR7 2008/SR9 2007/SR4 2011/SR4 2011/SR1 2010/SR10 2010/SR8 2011/SR3 2012/SR6
2013/SR08 2013/SR09 2013/SR10 2014/SR03 2014/SR4 2014/SR09 2014/SR12 2015/SR02 2015/SR04
2015/SR7 2015/SR08 2015/SR10 2016/SR03 2016/SR10

WWW.DIESELSHIP.COM
WWW.DIESELSHIP.COM 2

SECTION -II
Q6. (a) Describe how protection against the short circuit is provided.
B. A 4-pole, 3-phase induction motor operates from a supply whose frequency is 50 Hz. Calculate (i) Speed at
which the magnetic field of the stator is rotating, (ii) speed of the rotor when the slip is 0.04, (iii) the frequency
of the rotor current when the slip is 0.03.
2011/SR3 2015/SR10

Q7. A. Sketch an arrangement showing the principal of proportional plus integral (P+I) control loop.
B. Compare the series and parallel resonance circuits. Find the frequency at which the following circuit resonates.

Q8. A. Explain the potential hazards of liquid-cooled transformers are used.


B. What are the losses in transformers? Mention the various factors which affect these losses. In a 25 KVA,
3300/233 V, single phase transformer, the iron and full-load Cu. Losses are respectively 350 and 400 watts.
Calculate the efficiency at half-full load, 0.8 power factor.

2009/SR2 2008/SR9 2007/SR4 2011/SR1 2010/SR8 2011/SR3 2012/SR12 2013/SR11 2014/SR03


2015/SR08

Q9. What is meant by i.)Voltage Stabilization, ii.) Filter choke iii.) Impedance, iv.) Rectification, vi.) Grid bias voltage
2011/SR9 2010/SR7 2010/SR11 2011/SR11 2011/SR3 2012/SR11 2013/SR1 2013/SR04 2014/SR08
2015/SR10

Q10. A. Explain the effect of making incorrect phase and starter connections.
B. A 440V shunt motor tenets an armature current of 30A at 700 rev/min. The armature resistance is 0.7ohm. If
the flux is suddenly reduced by 20 per cent, to what value will the armature current rise momentarily? Assuming
unchanged resisting torque to motion, what will be the new steady values of speed and armature current? Sketch
graphs showing armature current and speed as functions of time during the transition from initial to final,
steady-state conditions.
2009/SR2 2008/SR9 2007/SR9 2007/SR4 2006/SR4 2010/SR11 2010/SR7 2010/SR4 2011/SR11
2012/SR3 2012/SR6 2012/SR9 2012/SR11 2013/SR4 2014/SR06 2014/SR08 2014/SR10 2015/SR10
2015/SR12 2016/SR16

Note : If you are looking for answers prepared in organized manner with clear drawings please visit our website by CLICKING HERE

WWW.DIESELSHIP.COM

Anda mungkin juga menyukai