Substation Equipment
Addendum No.3
Paragraph I "Cap and Pin. The cap and pin shall be of such
design that it will not yield or distort under·~e
specified mechanical load in such a manner as
to change the relative spacing of the insulators
or add other stresses to the shells and shall be
made of a good commercial grade of malleable
iron, ductile iron or steel. The insulator caps
shall be of the socket type, provided with
stainless steel cotter key. The cap shall be truly
circular, with the inner and outer surfaces
concentric, and shall be free from cracks,
shrinks, air holes, burrs and rough edges, to
minImIZe field concentrations and radio.
disturbances. The insulator pins shall be free
from cracks and air-holes. All bearing surfaces
shall be smooth and uniform so as to distribute
the loading stresses evenly:'
- Output DC ammeter
1001.142 1001-4 1001.4.31 b Add (g) Temperature rise test. One unit of each
rating shall be subject to this test. The test shall
be perfonned on battery charger being supply.