Anda di halaman 1dari 84

Complete product range 2012/2013

We make the goal!


Welcome to the world of sports
Sports equipment made in Germany

Haspo Sportgerte was founded by Gnter Lawes and his partner on 1 January 1976. The partners and their three employees worked
together on a production space of 600 m, producing 20 different items of sports equipment.

The company decided to erect its own production plant when space gradually became increasingly scarce. In the spring of 1979,
a 5000 m plot of land was acquired in Johannisweg in the village of Rhden. The production plant covering 2500 m was completed
in June 1980.

Steady expansion of the production programme saw the number of employees rising. In June 1983 the company commenced with
the production of information cabinets.

As of the beginning of 1991 Gnter Lawes headed the company with a new partner. As the company continued to grow steadily,
the production area was extended by another 1000 m. At the end of 2000 this prompted Haspo Sportgerte to acquire a neigh-
bouring production plant, thus meeting the need for more space.

Steffan Lawes, the founders son, joined the company on 1 January 1997. He became a Managing Partner along with Gnter Lawes
and his partner on 1 January 1999.

Since 1 January 2009 Steffan Lawes has been the companys sole Managing Partner. At present 250 different products are manu-
factured with 30 employees on a production area of more than 6000 m and premises covering more than 20000 m.

We sponsor the goals!


From district league level to the Bundesliga (Germanys top league), whether for students, senior citizens, women or
professional teams our goals are being used in Germany, Europe and all over the world.

We thank you for your cooperation

LEISTUN
S-
UCH

GS
ZENT
HW

C UM
NA
Soccer 4 45
We make the goal!
and we have done so for more than 36 years now

Handball 45 51
As the leading manufacturer of aluminium sports equipment in Europe, Haspo Sportge-
rte is now entering its 37th year.

We have set landmarks with the development of our equipment and made Haspo an
established name in the sports world, a name that stands for quality and reliability. Hockey 52
This is also shown in the fact that we are now exporting sports equipment to every
continent proof of the quality of our products.

Quality from Germany Tennis 53 56


We are naturally constantly looking to improve and redevelop our equipment as this is
the only way to achieve success on the market. Using high-quality materials, such as
screws made of rustproof V2A steel, is a matter of course for us, but it does make all the
difference on the market.
Volleyball 57 63
Safety is paramount for us
All the appliances tested by the German technical inspection authority TV are shown
with the TV mark of certification in the catalogue. This mark has been newly introduced
Multi-functional
by the TV due to growing international markets. The TV mark, bearing the wording 64
uprights
Safety tested and Production monitored, proves that a product has been successfully
tested. The production plant is also regularly monitored by the TV, which means even
more safety for you and your customers.
Basketball 65 67
Fast delivery times are no problem thanks to our just-in-time logistics system since we
keep all the equipment on stock, ready to be delivered to you.

If you are looking for aluminium sports equipment we, in conjunction with a sales
concept that targets specialist stores, are an efficient, reliable partner. Athletics 68
We supply our products neutrally without Haspo labels.

We would be delighted to see you continuing to focus on Haspo quality and Haspo
technology made in Germany. Water polo/
69 74
Swimming

Yours

Ball trolley 75

Rugby/Football 76

Steffan Lawes

Badminton 77

Information
78 81
cabinets

Spares 82

News 83
Soccer

4
Safety system net holder (SSN)

The Safety system net holder by Haspo with decisive


advantages.

This net holder is suitable for all border ropes up to a thickness of


10 mm.

Fixation is done first to the net and then net and holder will be
fixed together to the goal.

Very simple assembly. Bend off net holder, press border ropes
into the eye now the net holder is firmly fixed to the net.

When all net holders are assembled the net to be fixed to the
goal by plugging into the notch of the goal profile and is then
secured with a 90 turn. Very short assembly-time. Easier and
faster than ever before.

Careful treatment of the nets since no sharp edges nets will


hold much longer.

No injuries possible and a very low construction height of


20 mm only.
The-high-quality plastic guarantees a high stability and
longevity rustproof is guaranteed.

All Haspo goals are supplied with this net fixation system
(goals except with net holder rail).

All goals already delivered can be changed over without problem.

Cat.-no. 011001
Soccer

* 5
Soccer goals
For insertion into ground sockets, with aluminium cast corner joints, 7.32 2.44 m

Technical features: For more than 30 years our well-


established construction, which has constantly been modified.
However, we always took care that spare parts are also provided
for old goals.
The goals with decisive advantages:
extremely stable and precise-fitting aluminium cast corner
joints
reinforced aluminium net hoops
quick and simple assembly and disassembly
Safety system net holders
one hundred percent steady goal, location in ground sockets
by use of special wedges

Comply with DFB and FIFA regulations

Standard equipment: Matt silver anodised finish or white Cat.-no. 99 anodised, Cat.-no. 995 white
powder coated at additional cost. Cat.-no. 100 anodised, Cat.-no. 1005 white
Cat.-no. 1001 anodised, Cat.-no. 10015 white

Accessories: Ground frame Upward folding,


Cat.-no. 194, 184 and 185 (page 6)

Cat.-no. 99 anodised*
Cat.-no. 995 white*
Incl. net hoops and net hoop braces made of aluminium tube
40 mm diameter, Safety systems net holders, ground sockets
insertion depth 500 mm with cover and special wedges,
acc. to EN 748 and TV

Cat.-no. 100 anodised*


Cat.-no. 1005 white*
Identical to Cat.-no. 99 but net hoops and net hoop braces
made of aluminium tube 30 mm diameter, acc. to EN 748 and
TV
Cat.-no. 101 anodised, Cat.-no. 1015 white
Cat.-no. 1001 anodised*
Cat.-no. 10015 white*
Identical Cat.-no. 100, but without special wedges,
acc. to EN 748 and TV

Cat.-no. 101 anodised*


Cat.-no. 1015 white*
Incl. Free hanging net consisting of galv. steel upright with
ground sockets and all tensioning ropes, Safety system net
holders, ground sockets insertion depth 500 mm with cover
and special wedges, acc. to EN 748 and TV

Free hanging net retrofit set


Cat.-no. 1010
Incl. galv. steel uprights with ground sockets and all tensioning
ropes

Cat.-no. 102 anodised


Cat.-no. 1025 white
Incl. Ground net hoops and matching ground sockets, net
hoop braces, Safety system net holders, ground sockets inser-
tion depth 500 mm with cover and special wedges Cat.-no. 102 anodised, Cat.-no. 1025 white
Soccer

6
Base frames
Upward folding, with steplessly adjustable net depth regulation

If you want to make lawn care easier, this fully Upward folding
base frame also of course of all aluminium manufacture
is an absolute necessity. Alongside easier pitch care, the nets are
also better predected; no damage to nets from lawnmowers.
An investment with short-term payoff.

Technical features: A structure of especially strong aluminium


tubes. Diameter 40 mm, depth of base frame for net depths from
1.50 to 2 m, steplessly adjustable. The upward folding feature is
achieved by stable hinges simply fitted to the uprights.
Also available as retrofit set for all existing goals.

Standard equipment: Natural bright aluminium finish incl. all


necessary accessories.

Cat.-no. 194
For soccer goals, 7.32 2.44 m steplessly adjustable for net
depths of 1.50 m to 2 m, for insertion into ground sockets

Cat.-no. 1941
For junior soccer goals, 5 2 m for net depths
of 1 m, for insertion into ground sockets, not adjustable

Cat.-no. 1942
For small pitch goals, 3 2 m for net depths of
1 m, for insertion into ground sockets, not adjustable

Base frames
Upward folding, Type Bundesliga

This Upward folding base frame was developed on the basis of


our well-established base frames of Cat.-no. 194, 1941 and 1942.
It is, however, made of special aluminium double chamber profiles
80 40 mm.

Technical features: The base frames are supplied in two parts


and both parts are linked with especially strong aluminium angles.
The base frame is fixed to the goal construction by means of
special hinges being mounted at the uprights. Fixing of the net is
done in the lateral chamber with the Safety system net holders.
Thus the net can be removed without any problems. The Safety
system net holders remain at the net.
It can also be used as retrofit set for all existent goals. Cat.-no. 185
For soccer goals 7.32 2.44 m For insertion into ground
Standard equipment: Natural bright aluminium finish, sockets, for net depths of 2 m, not adjustable
incl. Safety system net holders and all necessary accessories
Cat.-no. 1841
Cat.-no. 184 For junior soccer goals 5 2 m For insertion into ground
For soccer goals 7.32 2.44 m For insertion into ground sockets, for net depths of 1 m, not adjustable
sockets, for net depths of 1.50 m, not adjustable
Cat.-no. 1842
For junior soccer goals 3 2 m For insertion into ground
sockets, for net depths of 1 m, not adjustable
Soccer

7
Soccer goals
For insertion into ground sockets, with welded mitres, 7.32 2.44 m

Due to the positive experiences with our soccer goals For Standard equipment: Crossbar/upright mattsilver anodised or
insertion into ground sockets these special stable goals were white powder coated. Incl. net hoops and net hoop braces made
developed. of aluminium tube 30 mm diameter, natural bright aluminium
There are following decisive innovations and improvements: finish, Safety system net holders, ground sockets insertion
welded mitres at the crossbar depth 500 mm with covers and special wedges.
special fasteners fitted exactly between crossbar and uprights,
net hoops with long and stable links which fit exactly in the Cat.-no. 98 anodised
groove of the goal profiles Cat.-no. 985 white
Safety system net holders
Stability and durability are improved decisively by the above Without illustration:
mentioned construction characteristics. Top goals bearing each Soccer goals as described above but with Free hanging net
comparison. (same free hanging net as of soccer goals of Cat.-no. 101 on
page 5).
Technical features: The goals with decisive advantages and
improvements. High stability and consequently durability by Cat.-no. 981 anodised
welded mitres of the crossbars, special fasteners in crossbar/ Cat.-no. 9815 white
upright construction and net hoops with long and stable links
fitting exactly in the groove of the goals profiles and therefore Accessories: Ground frame Upward folding
reinforcing additionally the connection crossbar/uprights. Cat.-no. 194, 184, 185 (page 6)
Safety system net holders
simple, quick assembly and disassembly
one hundred percent steady goal location in ground sockets by
use of special wedges no wavering of goals

Comply with DFB and FIFA regulations acc. EN 748 and TV

Junior soccer goals


For insertion into ground sockets, with welded mitres , 5 2 m

Same goal construcion as of soccer goals with welded mitres of


Cat.-no. 98. The only difference is the goal dimensions. As of
now you can also dispose of a top class goal for junior matches.

Standard equipment: 5 2 m

Standard equipment: Matt silver anodised finish

Cat.-no. 1302
Soccer

8
Soccer goals
For insertion into ground sockets, with welded mitres,
with net holder rail, 7.32 2.44 m

Due to the positive experiences with our soccer goals For [1]
insertion into ground sockets these special stable goals were
developed (see detail photo 1).
There are following decisive innovations and improvements:
welded mitres at the crossbar
special fasteners fitted exactly between crossbar and uprights
(see detail photo 2)
net hoops with long and stable links which fit exactly in the
groove of the goal profiles (see detail photo 3)
net holder rail (see detail photo 4)

Technical features: The goals with decisive advantages and


improvements. High stability and consequently durability by
welded mitres of the crossbars, special fasteners in crossbar/
upright construction and net hoops with long and stable links [2]
fitting exactly in the groove of the goals profiles and therefore
reinforcing additionally the connection crossbar/uprights.
net holder rail
simple, quick assembly and disassembly
one hundred percent steady goal location in ground sockets
by use of special wedges no wavering of goals

Comply with DFB and FIFA regulations acc. EN 748 and TV

The net holder rail (see detail photo 4) has, compared to usual
net holders, certain advantages:
nets can be easily and quickly hooked in/unhooked [3]
net hooks must not be screwed in/slid in
net hooks do not get lost
same distance of hook-in points
The openings for the nets in the net holder rail are punched so
that they do not have sharp edges or burrs. The net holder rail is
already welded into the profile. The profile and holder form a
unit.

Standard equipment: Crossbar/upright mattsilver anodised or


white powder coated. Incl. net hoops and net hoop braces made
of aluminium tube 30 mm diameter, natural bright aluminium
finish, Safety system net holders, ground sockets insertion [4]
depth 500 mm with covers and special wedges.

Cat.-no. 98 anodised
Cat.-no. 985 white

Without illustration:
Soccer goals as described above but with Free hanging net
(same free hanging net as of soccer goals of Cat.-no. 101 on
page 5).

Cat.-no. 981 anodised


Cat.-no. 9815 white

Accessories: Ground frame Upward folding


Cat.-no. 194, 184, 185 (page 6)
Soccer

9
Soccer goals
Transportable, with welded mitres, 7.32 2.44 m

The customers wish for more stable and stronger goals was the
reason for the development of this production line.
The new generation of soccer goals Transportable of
7.32 2.44 m with decisive improvements and innovations:
welded mitres of crossbars
crossbar/uprights of proved oval profiles 120/100 mm
ground spars/ground tubes of stable square profiles 80 80 mm
special fasteners fitting exactly between crossbar and uprights
reinforced links of uprights/ground spars welded on the ground
spars
very strong net hoops of aluminium tube 40 mm diameter
stable links at net hoops fitting exactly in the groove of the goals
long ground spars to improve stability
Safety system net holders

Stability and durability are substantially improved by the above


mentioned construction details.
Top goals bearing each comparision.

Technical features: The goals with decisive advantages and


improvements. High stability and consequently durability by welded
mitres of the crossbars, special fasteners in crossbar/upright
construction and fasteners additionally reinforced and welded in
upright/ground spar construction as well as reinforced net hoops of
stable aluminium tubes 40 mm diameter.
Elegant new construction. The ground spars of stable square profile
80 80 mm are incorporated in the proved oval profile
120/100 mm (see detailed photo).
equipped with integrated securing screws
Safety system net holders
simple, quick assembly and disassembly by special fasteners in
crossbar/upright and upright/ground spar construction (see
detailed photo)
2 m long ground spars guarantee a special strong execution.
Of course the ends of the ground spars are closed.

Standard equipment: Crossbar/uprights matt silver anodised and


ground frame of natural bright aluminium finish. Incl. net hoops and
net hoop braces of aluminium tube 40 mm diameter, Safety system
net holders and ground frame, goal depth 2 m.

Cat.-no. 108
Acc. to EN 748 and TV in connection with Supersafe
anchoring systems Cat.-no. 12221/122219

Accessories: Safety anchoring systems of


Cat.-no. 12221/122219 (page 31) and
Transportation rollers of Cat.-no. 11032 (page 35).

Crossbar/uprights

Ground frame
Soccer

10
Soccer goals
Transportable, with aluminium cast corner joints, 7.32 2.44 m

Our soccer goals Transportable are used where, e. g. for


training purposes, goals are needed quickly at any location
without elaborate preparation.

Technical features: Rugged design with the same technical


features as the soccer goals. Ground sockets are not necessary.
Acc. to EN 748 and TV in connection with Supersafe anchoring
systems Cat.-no. 1102/11029

Accessories: Safety anchoring systems of Cat.-no. 1102/11029


(page 31) and Transportation rollers of Cat.-no. 11031 (page 35)

Standard equipment: Matt silver anodised finish.

Cat.-no. 109
Incl. net hoops, net hoop braces and supporting braces made of
aluminium tube 40 mm diameter, Safety system net holders and
base frame of same profile as crossbar/upright construction, goal
depth 2 m

Cat.-no. 110
Incl. net hoops, net hoop braces made of aluminium tube
30 mm diameter, supporting braces made of aluminium tube
40 mm diameter, otherwise identical to Cat.-no. 109,
goal depth 2 m

Junior soccer goals


Transportable, with welded mitres, 5 2 m

These are top goals and similar to the goals Transportable


of Cat.-no. 108 (page 9).

1.50 m long ground spars guarantee a special strong execution.


Of course, the ends of the ground spars are closed.

Standard equipment: Crossbar/uprights matt silver anodised


and ground frame of natural bright aluminium finish.
Incl. net hoops of aluminium tube, diameter 40 mm, net hoop
braces, Safety system net holders and ground frame, goal depth
1.50 m.

The ground tubes can be displaced at a distance of 1 m, so that


nets of a lower depth of 1 m will fit.

Cat.-no. 119
TV in connection with Supersafe anchoring system
Cat.-no. 1222/12229

Accessories: Safety anchoring systems of Cat.-no. 1222/12229


(page 31) and Transportation rollers of Cat.-no. 11032 (page 35).
Ground frame Crossbar/uprights
Soccer

11
Soccer goals
Transportable, Type Switzerland, with aluminium cast corner joints, 7.32 2.44 m

Crossbar/uprights

Ground frame

This goal corresponds to the regulations of the Swiss Soccer Same construction as soccer goals Transportable of
Association (SFV) and was especially developed for the Swiss Cat.-no. 108 (page 9) except connection crossbar/uprights and
market but can also be used in all other countries: height of ground spars.
crossbar/uprights of proved oval profiles 120/100 mm,
ground spars/ground tubes of stable rectangle profiles Standard equipment: Crossbar/upright white powder coated,
80 40 mm ground frame/net hoops of natural bright aluminium finish.
exact fitting aluminium cast corner joints Incl. net hoops and net hoop braces of aluminium tube 40 mm
reinforced links (connection uprights/ground spars) welded on diameter, Safety system net holders and ground frame of
the ground spars rectangular profile 80 40 mm, goal depth 2 m.
very strong net hoops of aluminium tubes 40 mm diameter,
stable links at net hoops fitting exactly in the groove of goal Cat.-no. 107
profiles Acc. to EN 748 and TV in connection with Supersafe anchoring
2 m long ground spars improve stability system Cat.-no. 1228/12289
integrated securing screws
Safety system net holders Accessories:
Supersafe anchoring systems of Cat.-no. 1228/12289 (page 31)
and Transportation rollers of Cat.-no. 11033 (page 35).

Soccer goals
Transportable, Type Switzerland, with welded mitres, 7.32 2.44 m

Same construction as goals Transportable of Cat.-no. 108


(page 9), but only crossbar/upright in white powder coated and
complete ground frame made of special profiles
80 40 mm acc. to the Swiss Soccer Associations regulations
(SFV).

Cat.-no. 1081
Acc. to EN 748 and TV in connection with Supersafe anchoring
systems Cat.-no. 1228/12289

Accessories: Supersafe anchoring systems of Cat.-no.


1228/12289 (page 31) and Transportation rollers of Cat.-no.
11033 (page 35).
Soccer

12
Junior soccer goals and small pitch goals
Transportable, Type Switzerland, with aluminium cast corner joints 5 2 m and 3 2 m

Crossbar/uprights

Ground frame

Also these junior soccer goals correspond to the regulations of Cat.-no. 117
the Swiss Soccer Association (SFV). 3 2 m, the ground tubes can be displaced at a distance
Same construction as the soccer goals Tranportable of 1 m, so that nets of a lower depth of 1 m will fit. TV in
of Cat.-no. 107 (page 11) expect goal height and length of connection with Supersafe anchoring systems Cat.-no. 1229/12299
ground spars.
Accessories: Supersafe anchoring systems of Cat.-no. 1229/12299
Cat.-no. 118 (page 31) and Transportation rollers of Cat.-no. 11033 (page 35).
5 2 m, the ground tubes can be displaced at a distance
of 1 m, so that nets of a lower depth of 1 m will fit. Standard equipment: Crossbar/uprights matt silver anodised,
TV in connection with Supersafe anchoring systems ground frame/net hoops of natural bright aluminium finish.
Cat.-no. 1229/12299 Incl. net hoops of aluminium tube, diameter 40 mm, net
hoop braces, Safety system net holders and ground frame of
rectangular profile 80 40 mm, goal depth 1.50 m

Soccer goals
Transportable, Type Switzerland, with welded mitres, 5 2 m

Photo above (as Cat.-no. 118)

This execution corresponds to the above junior soccer goals but it


is delivered with welded mitres (as Cat.-no. 119, page 10).

Cat.-no. 1191
TV in connection with Supersafe anchoring system Crossbar/uprights
Cat.-no. 1229/12299

Accessories: same as Cat.-no. 118

Ground frame
Soccer

13
Junior soccer goals
Slewable, with aluminium cast corner joints, 5 2 m

If there is not enough space for freestanding goals you can use Standard equipment: Crossbar/upright
this goal construction. matt silver anodised, ground frame/net
Outside the sports ground two ground sockets per goal are set in hoops of natural bright aluminium finish.
concrete to pick up profiles with hinges so that the goal
construction can be fixed. Hinges are also available in the lower Cat.-no. 1250 Crossbar/uprights
parts of the uprights.
Rollers are mounted at the side bars of the goals so that they can
easily be slowed with mounted net. One person can do that
without any tool.
The distance between front edge ground socker and front edge
upright is adjustable from 3.24 m to 4.28 m. Other distance can
be requested.
Crossbar/upright construction of oval profile 120/100 mm,
complete ground frame of aluminium special double chamber
profile 80 40 mm, net hoop of especially stable aluminium
tube 50 4 mm.
Also these goals are equipped with our Safety system net
holders.
Contrary to the photo, there are not two short pick up profiles
located in the rear area where the spars are attached but rather
a short and a long pick up profile (2.20 m protruding from the
sleeve). The goal construction is fixed onto the long pick up
profile when it is folded.

Junior soccer and small pitch goals


Transportable, with steel net hoops, with aluminium cast corner joints, 5 2 m and 3 2 m

Absolutely top class junior soccer/small pitch goals. There is no


better goal of same stability and strength.
Same net hoop/base frame construction made of galvanized
steel tube like handball goals for indoors Cat-no. 200 (detailed
description see page 46).

Technical features: A construction with especially strong net


hoops made of galvanized steel tubes.
No slip-on connections, therefore extremely solid and stable.
Extremely strong mold aluminium corner joints fitting perfectly.
all screws with integrated securing
Safety system net holders
simple and quick assembly and disassembly

Standard equipment: Matt silver anodised finish incl. net TV in connection with the Safety base frames of the
hoops and ground tubes made of galvanized steel tube, upright Cat.-no. 1225/1226 or the Supersafe anchoring systems
covers and Safety system net holders. of the Cat.-no. 1227/12279.

Accessories: Supersafe anchoring systems of the Cat.-no. Cat.-no. 1201 junior soccer goals 5 2 m
1227/12279 (page 31), Safety base frames of the Cat.-no.
1225/1226 (page 32) Cat.-no. 1401 small pitch goals 3 2 m
Soccer

14
Junior soccer and small pitch goals
Transportable, with aluminium cast corner joints, 5 2 m and 3 2 m

For many years this standard execution of Haspo junior soccer Cat.-no. 120/121
goals and small pitch goals has proved. Of course, with decisive TV in connection with Safety base frame Cat.-no. 1223 or
advantages: Supersafe anchoring systems Cat.-no. 1222/12229
Haspo German registered patent screw recess in the crossbar/
upright joint problem area. More stability than with counter- Cat.-no. 140/141
sunk screwings TV in connection with Safety base frame Cat.-no. 1224 or
very stable and pecise-fitting aluminium cast corner joints Supersafe anchoring systems Cat.-no. 1222/12229
special stable execution by 1.20 m long ground spars closed at
the end Cat.-no. 122/142
net hoop construction of special aluminium tube 40 mm TV in connection with junior soccer goals/small pitch goals
diameter Cat.-no. 120/121/140/141
all screws with integrated locking so that loosening of screwed
joints with the well-known disadvantageous effects are no Accessories:
longer possible Supersafe anchoring systems of Cat.-no. 1222/12229 (page 31)
Safety system net holders and Safety ground frames of Cat.-no. 1223/1224 (page 32).
thought-out construction, quick assembly
optionally available at additional costs with reinforced
ground tubes of 80 40 mm system profiles. These ground
tubes may of course also be supplied as reftrofit set for already
available goals.

Standard equipment: matt silver anodised finish or


at additional costs with black or red plastic stripes

Haspo German registered


patent screw recess in the
crossbar/upright problem
area.

Haspo German registered patent screw


recess in the crossbar/upright problem
area.

One-Piece net hoop structure made


of especially stable 40 mm diameter
aluminium tubes.

Reinforced ground tube of 80 40 mm


aluminium system profiles (Cat.-no.
121/141)
Soccer

15
Junior soccer and small pitch goals
Transportable, with aluminium cast corner joints

Cat.-no. 120 Cat.-no. 140 Standard equipment: Incl. net hoops, net
junior soccer goals 5 2 m small pitch goals 3 2 m hoop braces, base frame with round tubes,
ground spar seal covers and Safety system
net holders.
Cat.-no. 121 Cat.-no. 141
junior soccer goals 5 2 m small pitch goals 3 2 m Standard equipment: Incl. net hoops, net
with reinforced ground tubes with reinforced ground tubes hoop braces, base frame with reinforced
ground tubes made of aluminium system
profiles 80 40 mm, covers for ground
Cat.-no. 122 Cat.-no. 142 tubes and Safety system net holders.
Retrofit Set Reinforced Ground Tubes Retrofit Set Reinforced Ground Tubes
for junior soccer goals 5 2 m for small pitch goals 3 2 m Standard equipment: Consisting of
reinforced ground tubes made of
80 40 mm aluminium system profiles and
all necessary mounting materials.

Junior soccer and small pitch goals


For insertion into ground sockets, with aluminium cast corner joints, 5 2 m and 3 2 m

Goals intended For insertion in ground sockets corresponding Accessories: Ground frame Upward folding,
dimensionally to the freestanding versions, being especially Cat.-no. 1941, 1942, 1841 or 1842 (page 6)
suitable where rearrangement is not necessary or required.
Standard equipment:
Technical features: Matt silver anodised finish or with black or red plastic stripes at
extremely stable and precise-fitting cast aluminium corner joint additional cost. Incl. net hoops, net hoop braces, Safety system
reinforced aluminium net hoops net holders, and ground sockets insertion depth 500 mm
Safety system net holders with cover, acc. to EN 748 and TV

Cat.-no. 130
junior soccer goals 5 2 m For insertion in ground sockets

Cat.-no. 150
small pitch goals 3 2 m For insertion in ground sockets

Junior soccer and small pitch goals


For insertion into ground sockets, with aluminium cast corner joints, 5 2 m and 3 2 m

Same goal execution as Cat.-no. 1001 (page 5) but with Cat.-no. 1301
different goal sizes. It offers all advantages of the big goal. Junior Soccer goals 5 2 m

Standard equipment: matt silver anodised finish. Cat.-no. 1501


Small Pitch goals 3 2 m
Soccer

16
Junior soccer goals
Transportable, with patented steel corner joint, 5 2 m

Due to the permanent transport of these goals the connection


crossbar/upright is strongly used. A stable corner joint is absolutely
important so that we also supply this goal with the patented
steel corner joint, which has already proved in the handball goals.
Otherwise the construction is the same as of junior soccer goals
Transportable of Cat.-no. 120/121.

TV in connection with the Supersafe anchoring systems


Cat.-no. 1222/12229

Standard equipment: Matt silver anodised finish

Cat.-no. 1209
junior soccer goals 5 2 m Transportable with patented steel
corner joint. Incl. net hoope, net hoop braces, ground frame
with round ground tubes, ground spare covers and Safety system
net holders

Cat.-no. 1219
junior soccer goals 5 2 m Transportable with reinforced
ground tubes and patented steel corner joint. Incl. not hoops,
not hoop braces, ground frame with reinforced ground tubes
of aluminium profiles 80 40 mm, ground spare covers and
Safety system net holders

Accessories: Supersafe anchoring systems of Cat.-no.


1222/12229 (page 31) and Safety ground frames of
Cat.-no. 1223 (page 32)

Indoor soccer goals


Transportable, with Folding net hoops, with aluminium cast corner joints, 5 2 m

More and more indoor soccer is played. But so far suitable goals
were missing meeting the requirements of this sports discipline.
The handball goals 3 2 m available in the gymnasia are too
small the goals used outdoor do not meet the requirements of
the gymnasia. Based on the positive experiences made with the
indoor handball goals with Folding net hoops, this goal
construction was developed which is meeting all requirements.

Technical features: Crossbar/upright construction and corner


joints like junior soccer goals of Cat.-no. 120/121. Extremely
stable construction due to galvanized steel net hoops, which
can be folded if goals are not used thus space-saving storage.
No damage to the gymnasium floor felt predectors and upright
cover prevent contact with the aluminium/steel parts with the
gymnasium floor.
all screws with integrated securing
Safety system net holders
simple, quick assembly and disassembly

Standard equipment: Matt silver anodised finish incl. net


hoops and ground tubes made of galvanized steel tube, upright
covers and Safety system net holders

Cat.-no. 1205
Soccer

17
Integrated safety system net holder (ISSN)
completely welded goals with ISSN

Because the ISSN is attached within a low-lying groove of the The completely welded goals which come in dimensions of
profile, it is flush with the profile. This brings significant 7.32 2.44 m, 5 2 m and 3 2 m are made of profiles which
advantages to the goalkeeper in the area of the ground frame. have a deep chamber.
The risk of injuries is reduced. Additionally, the risk of injuries
is reduced with contacts of the goalposts.
Since the groove which holds the net hooks has sufficient
dimensions, mounting the net holder is very easy.

Soccer goals
Transportable, completely welded, 7.32 2.44 m

These top goals are completely welded in one piece and there-
fore more stable and more durable.

Crossbar and uprights are of proven oval profiles 120/100 mm,


ground tubes of special profile 80 80 mm with inserted groove
for net holders, net hoop of special stable aluminium tubes
50 4 mm. Weldings are reinforced.

Ground bars and ground tubes are welded to the goal


construction that way that all net holders are at the outside
and thus there is no danger for the keeper.

Two additional handles are welded to make transport easier.


Of course, these goals are delivered with our proved Safety
system net holders.

Standard equipment: Natural bright aluminium finish.

Cat.-no. 103 Goal depth 1.50 m


TV in connection with the Supersafe anchoring systems of
Cat.-no. 12221/122219.

Cat.-no. 104 Goal depth 2 m


Acc. to EN 748 and TV in connection with the Supersafe anchoring
systems of Cat.-no. 12221/122219.

Accessories: Supersafe anchoring systems of Cat.-no.


12221/122219 (page 31) and transportation rollers of
Cat.-no. 11032 (page 35).

Crossbar/uprights Ground frame


Soccer

18
Junior soccer goals
Transportable, completely welded, 5 2 m

Crossbar/uprights

Ground frame

Also these junior soccer goals 5 2 m are completely welded Cat.-no. 1052 Goal depth 1 m
and of the same construction as those described on page 17. TV in connection with the Supersafe anchoring systems of the
They are different in size and ground bars and ground tube are Cat.-no. 1229/12299
made of special profiles 80 40 mm.
On request delivery with handles at additional cost. Cat.-no. 1053 Goal depth 2 m
Acc. to EN 748 and TV in connection with the Supersafe
Standard equipment: Natural bright aluminium finish. anchoring systems of the Cat.-no. 1229/12299

Cat.-no. 105 Goal depth 1.50 m Cat.-no. 1051 Handles (see detailed photo page 17)
TV in connection with the Supersafe anchoring systems of the Complete set consisting of 4 handles for 1 pair of goals
Cat.-no. 1229/12299
Accessories:
Supersafe anchoring systems of Cat.-no. 1229/12299 (page 31)
and Transportation rollers of Cat.-no. 11033 (page 35).

Small pitch goals


Transportable, completely welded, 3 2 m

Small pitch goals completely welded in one piece. Same Crossbar/uprights Ground frame
construction as of junior soccer goals 5 2 m.
On request delivery with handles at additional cost.

TV in connection with the Supersafe anchoring systems of the


Cat.-no. 1229/12299

Standard equipment: Natural bright aluminium finish.

Cat.-no. 1059 Goal depth 1.50 m

Cat.-no. 1051 Handles (see detailed photo page 17)


Complete set consisting of 4 handles for 1 pair of goals

Accessories:
Supersafe anchoring systems of Cat.-no. 1229/12299 (page 31)
and Transportation rollers of Cat.-no. 11033 (page 35).
Soccer

19
Net holder rail

The net holder rail has, compared to usual net holders, certain
advantages:
nets can be easily and quickly hooked in/unhooked
net hooks must not be screwed in/slid in
net hooks do not get lost
same distance of hook-in points

The openings for the net within the net holder rail do not have
sharp edges and are burr-free.

The net holder rail is slid into the profiles prior to welding the
goal and can, therefore, not be stolen.

Profile and rails form one single unit.

The net holder rail is not only affixed in the crossbar/upright,


but also at the ground bar and ground tube.
Therefore, the net holder rail is integrated over the entire goal.

With this version, the completely welded goals which come in


dimensions of 7.32 2.44 m, 5 2 m and 3 2 m are provided
with net holder rail.

Cat.-no. 1034
= Cat.-no. 103 plus net holder rail

Cat.-no. 1044
= Cat.-no. 104 plus net holder rail

Cat.-no. 1054
= Cat.-no. 105 plus net holder rail

Cat.-no. 10524
= Cat.-no. 1052 plus net holder rail

Cat.-no. 10534
= Cat.-no. 1053 plus net holder rail

Cat.-no. 10594
= Cat.-no. 1059 plus net holder rail
Soccer

20
Soccer goals
Transportable, Inherently safe, completely welded, 7.32 2.44 m

Crossbar/uprights Ground spars Ground tube

These completely welded goals have integrated steel weights, are Crossbars/uprights of oval profile 120/100 mm, ground spars/
absolutely resistant to tipping and can be used without any other ground tubes of profile 80 80 mm with pressed-in groove for
ground anchors. The goal depth is 2 m. They comply with fitting the net holders, net hoops of especially stable aluminium
EN 748 and TV. tubes 50 4 mm, 4 welded-on transportation rollers as well as
These goals are primarily used on artificial lawns or hard pitches, 4 steel weights 33 kg each and 2 welded-on handles.
but can also be used on grass pitches.
4 steel weights 70 50 mm, length 1200 mm which are inserted Of course these goals are only supplied with the proven Safety
into the rear ground tube. They each weigh 33 kg and ensure a system net holders
stable, tip-resistant position for the goal. The steel weights must
be inserted in the goals onsite. Standard equipment: Natural bright aluminium finish
At the front of the goal, a handle is welded to each side so that
the goals can be tilted back and easily rolled (4 rollers per goal) Cat.-no. 114
to any location.
The rollers are made of foamed polyurethane and are thus
puncture-resistant. They have the same running characteristics as
inflated rollers.

Junior soccer goals


Transportable, Inherently safe, completely welded, 5 2 m

These completely welded junior soccer goals are of the same Standard equipment: Natural bright aluminium finish
construction as those in Cat.-no. 114. They are different in goal
size because the goal depth is 1.50 m and 3 transportation Cat.-no. 115
rollers are welded to the rear on the ground tubes.
As with the soccer goals, these goals are also delivered with 4
steel weights 70 50 mm, length 1200 mm, per weight 33 kg,
which are inserted in the rear ground tubes and ensure a Crossbar/uprights
tip-resistant position for the goal. The steel weights must be
inserted in the goals onsite.
Crossbars/uprights of oval profile 120/100 mm, ground spars/
ground tubes of profile 80 80 mm with pressed-in groove for
fitting the net holders, net hoops of especially stable aluminium
tubes 50 4 mm, 3 welded-on transportation rollers as well as Ground spars
4 steel weights 33 kg each and 2 welded-on handles.

Of course these goals are only supplied with the proven Safety
system net holders.

Ground tube
Soccer

21
Soccer goals
Transportable, Compact, 7.32 2.44 m

Compact means: crossbar and uprights are completely welded in Standard equipment: Natural bright aluminium finish.
one piece as well as the ground frame. A special system links On request delivery with handles at additional cost.
crossbar and uprights (see detailed photo) with the ground frame
and is fixed with self-locking screws. Then only net hoop construc- Goals without handles:
tion and net are mounted the goal is ready to use. Cat.-no. 1031 Goal Depth 1.50 m
A real alternative if you do not use completely welded goals even TV in connection with the Safety anchoring systems
considering stability and durability. Freight costs are essentially of Cat.-no. 12221/122219.
more favourable due to the compact construction.
The compact construction offers the advantage of a spring effect Cat.-no. 1041 Goal Depth 2 m
which relieves the construction correspondingly. So breaks of the Acc. to EN 748 and TV in connection with the Safety anchoring
weldings in the uprights/ground frame construction are avoided. systems of Cat.-no. 12221/122219.
Crossbar/uprights construction is made of the proven oval profiles
120/100 mm, ground frame of special profile 80 80 mm with Goals with handles:
groove to take the net holders. Net hoops are made of special Cat.-no. 1032 Goal Depth 1.50 m
stable aluminium tubes 50 4 mm. TV in connection with the Safety anchoring systems
Naturally we also deliver these goals with our proved Safety of Cat.-no. 12221/122219.
system net holders.
Cat.-no. 1042 Goal Depth 2 m
Acc. to EN 748 and TV in connection with the Safety anchoring
systems of Cat.-no. 12221/122219.

Accessories: Safety anchoring systems of Cat.-no. 12221/122219


(page 31) Transportation rollers of Cat.-no. 11032 (page 35)

Crossbar/uprights

Ground frame
Soccer

22
Junior soccer and small pitch goals
Transportable, Compact, 5 2 m and 3 2 m

The junior soccer goals Compact are of the same construction Cat.-no. 1051 Handles (see detailed photo page 17)
as those described on page 21. They are different in goal size Complete set consisting of 4 handles for 1 pair of goals
and the complete ground frame is made of special profiles
80 40 mm. Accessories: Safety anchoring systems of Cat.-no. 1229/12299
(page 31) and Transportation rollers of Cat.-no. 11033 (page 35).
Also these goals are delivered with the proven Safety system net
holders.

Standard equipment: Natural bright aluminium finish.


On request delivery with handles at additional cost.

Cat.-no. 10521 5 2 m, Goal depth 1 m


TV in connection with the Safety anchoring systems
of Cat.-no. 1229/12299. Crossbar/uprights Ground frame

Cat.-no. 10511 5 2 m, Goal depth 1.50 m


TV in connection with the Safety anchoring systems
of Cat.-no. 1229/12299.

Cat.-no. 10531 5 2 m, Goal depth 2 m


Acc. to EN 748 and TV in connection with the Safety anchoring
systems of Cat.-no. 1229/12299.

Cat.-no. 10591 3 2 m, Goal depth 1.50 m


TV in connection with the Safety anchoring systems
of Cat.-no. 1229/12299.
Soccer

23
Playground goals
completely welded, 3 2 m

Wherever you need very strong goals, for example on playgrounds Freestanding goals without Basketball unit:
or school yards, we developed these goals completely welded in Cat.-no. 1060
one piece made of aluminium. Goal frame of square profiles 80 80 mm

Now we also supply an execution with lengthened uprights Cat.-no. 1061


For insertion into ground sockets and with Basketball unit. Goal frame of oval profiles 120/100 mm

A net is not necessary. There is a frame of stable aluminium Freestanding goals with Basketball unit:
tubes of 35 3 mm to catch the ball. Distance of tubes is 88 mm. Cat.-no. 10601
The rear and lateral tubes are welded to an aluminium rectangular Goal frame of square profiles 80 80 mm
profile. 4 angles are welded to fasten the goal (freestanding
goals). Cat.-no. 10611
Goal frame of oval profiles 120/100 mm
The execution with a basketball unit provides an overhang of
60 cm and is delivered with a glassfibre back board of Goals For insertion into ground sockets,
120 90 cm, absolutely weather-proof, basket and net. without Basketball unit:
Cat.-no. 1062
The execution For insertion into ground sockets is delivered Goal frame of square profiles 80 80 mm
with ground sockets insertion depth 300 mm and covers.
Cat.-no. 1063
All types are acc. to EN 15312, in which the freestanding goals Goal frame of oval profiles 120/100 mm
can be anchoring.
Goals For insertion into ground sockets,
Very important: Goal depth is 1 m. You can choose two with Basketball unit:
different executions: crossbar/upright of square profiles Cat.-no. 10621
80 80 mm or of oval profiles 120/100 mm. Goal frame of square profiles 80 80 mm

Standard equipment: Natural aluminium bright finish. Cat.-no. 10631


Goal frame of oval profiles 120/100 mm
Soccer

24
Mini playground goals
Transportable, completely welded, 1.20 0.80 m and 1.80 1.20 m

With the exception of goal size this goal can be compared with 2 fixing angles are welded at the ground frame to fix the goal at
the playground goals (page 23) and due to the used material it the ground.
shows utmost stability practically indestructible.
Standard equipment: Natural bright aluminium finish.
The goal frame is made of system profiles 80 80 mm, base
frame of profiles 80 40 mm. To catch the ball a frame of stable Cat.-no. 162
aluminium tubes is welded (Cat.-no. 162 with 30 mm diameter, Inside dimensions 1.20 0.80 m, Goal depth 0.70 m
Cat.-no. 1621 with 35 mm diameter). Distance of tubes is about
88 mm. Cat.-no. 1621
Inside dimensions 1.80 1.20 m, Goal depth 0.70 m

Crossbar/uprights Ground frame

Ground anchors
for playground and mini playground goals

These ground anchors were especially developed for freestanding


playground and mini playground goals.

Can be used for all our goals with already welded brackets as
well as goals of other marks with the appropriate brackets.
A set consists of 2 galvanized steel ground anchors with inner
threads and hexagonal bolts with washers.

The stability of the goal is ensured through the use of the ground
anchors.

Cat.-no. 211
Soccer

25
Street soccer goals
Transportable, with aluminium cast corner joints, 3 1.60 m

Same construction as small pitch goals 3 2 m Transportable Cat.-no. 1922


of Cat.-no. 140 (page 14/15). Only the size is different. TV in connection with Supersafe anchoring systems
Cat.-no. 1222/12229
You can use these goals both for mini handball and street soccer.
Accessories: Safety anchoring system of
Cat.-no. 1229/12229 (page 31)

Street soccer goals


Transportable, with patented steel corner joints, 3 1.60 m

A freestanding goal of stable aluminium special profiles with the Standard equipement: Goal inside dimensions 3 1.60 m,
new patented steel corner joint. The result is a strong stability goal depth 1 m, natural bright aluminium finish, net hoops of
and long durability. aluminium tube, diameter 40 mm, incl. Safety system net holders.
You can use this goal everywhere, for example on the schoolyard,
in the street, on parking lots or in the garden. Cat.-no. 19229
The goals frame is of square profile 80 80 mm, net hoop of TV in connection with Supersafe anchoring
circular tube, diameter 40 mm. systems Cat.-no. 1106
To save space the net hoops can be folded by unscrewing
2 screws. Accessories: Safety anchoring system of
Cat.-no. 1106 (page 30)
Soccer

26
Mini training goals
Transportable, completely welded, 1.20 0.80 m, 1.80 1.20 m and 2.40 1.60 m

Due to the positive experiences with the big completely welded Inside dimensions 1.80 1.20 m, Goal depth 0.70 m
goals these small training goals completely welded were Cat.-no. 1721 (Mesh size 100 mm)
developed. Cat.-no. 172145 (Mesh size 45 mm)
The goal frame is made of system profiles 80 80 mm, ground
frame of profiles 80 40 mm, stable net hoops of aluminium Inside dimensions 2.40 1.60 m, Goal depth 1 m
tube 40 mm diameter. Net fixing with Safety system net holders. Cat.-no. 1723 (Mesh size 100 mm)
Extremely stable due to the materials used and the well-thought-
out design. Accessories: Safety anchoring systems of Cat.-no. 1107
(page 30).
Standard equipment: Natural bright aluminium finish, incl.
net and Safety system net holders. We can deliver nets with
mesh sizes of 100 and 45 mm (except Cat.-no. 1723).

Inside dimensions 1.20 0.80 m, Goal depth 0.70 m


Cat.-no. 172 (Mesh size 100 mm)
Cat.-no. 17245 (Mesh size 45 mm)
Crossbar/uprights Ground frame
Soccer

27
Mini training goals
Transportable, 1.20 0.80 m, 1.80 1.20 m and 2.40 1.60 m

Small goals developed by experts for soccer training but also to Inside dimensions 1.20 0.80 m, Goal depth 0.70 m
be used for other kinds of sports and games as for street hockey Standard equipment: Natural bright aluminium finish, net
and street soccer for example. hoops of aluminium tube 40 mm diameter, incl. net and Safety
system net holders.
These goals guarantee high stability and are necessary for an
effective training and playing programme for children and adults. Cat.-no. 192 (Mesh size 100 mm)
They will enjoy playing and training again. Cat.-no. 19245 (Mesh size 45 mm)

This goal can be used for several training possibilities, by using Accessories: Safety anchoring system of Cat.-no. 1106
4 goals for partner games for example. (page 30)

Technical features: Extremely strong and durable execution. Inside dimensions 1.80 1.20 m, Goal depth 0.70 m
Frame of special system profiles 80 40 mm, completely welded. Standard equipment: natural bright aluminium finish, net
Net hoops and ground tube of stable aluminium tubes. hoops of aluminium tube 40 mm diameter, incl. net and Safety
Net fixing at goal frame by Safety system net holders. system net holders.
After removing 2 wing screws the ground tube can be separated
and the net hoops folded to save space during storage. Cat.-no. 1921 (Mesh size 100 mm)
Cat.-no. 192145 (Mesh size 45 mm)
Now with special hinges to fix the net hoops so that a ground
tube is no more necessary. Therefore damages of the ground Accessories: Safety anchoring system of Cat.-no. 1106
tube in case of heavy duty are eliminated. (page 30)
We can deliver nets with mesh sizes of 100 mm or 45 mm
(except Cat.-no. 1923). Inside dimensions 2.40 1.60 m, Goal depth 1 m
Standard equipment: Natural bright aluminium finish, net
hoops of aluminium tube 40 mm diameter, incl. net with
100 mm mesh size and Safety system net holders.

Cat.-no. 1923 (Mesh size 100 mm)

Accessories: Safety anchoring system of Cat.-no. 1106


(page 30)
Soccer

28
Safety additional weights
for mini training goals

These safety additional weights were developed especially for the For mini training goals with the Cat.-no. 192, 1921, 1923,
weighting of the mini training goals on plastic lawns, artificial 1924, 1925, 19229, 15245 and 152145
lawns and hard pitches. Standard equipment: Natural bright aluminium finish made of
system profiles 80 40 mm. The length of the additional
Steel weights are integrated into the safety additional weights. weights is 1 m. The dispatch is through a parcel service. A set
Through the attachment of the safety additional weights, the (2 weights for a goal) is packed in a box which weighs 25 kg
safe stability of the goal increases. (see detail photo 12).

The safety additional weights are simply fixed with 2 securing Cat.-no. 1340
straps each on the sides underneath the net hoops and can be
dismantled easily at any time. For mini training goals with the Cat.-no. 172, 1721 and
1723
By using the additional weights, the weight of each goal Standard equipment: Natural bright aluminium finish made of
increases by 24 kg. system profiles 80 80 mm. The length of the additional
weights is 1 m. The dispatch is through a parcel service. A set
(2 weights for a goal) is packed in a box which weighs 25 kg
(see detail photo 34).

Cat.-no. 1350

[1] [3]

[2] [4]
Soccer

29
Safety mini training goal
Transportable, 1.20 0.80 m and 1.80 1.20 m

These goals are the result of consistent enhancements of our The product comes with a net having a mesh size of 45 mm.
previous mini goals, which are still available.
Inside dimensions 1.20 0.80 m, Goal depth 0.70 m
This design is an absolute innovation. Standard equipment: natural bright aluminium finish, net hanger
made of aluminium tube diameter 40 mm, incl. net with mesh size
The special feature of this design: the connection of crossbar/ of 45 mm and safety-system net holders
uprights of 90 bows the goal frame has, therefore, rounded
edges significantly reducing the risk of injury, particularly in the Cat.-no. 15245
head and face region of children, since all sharp edges have been
eliminated. Inside dimensions 1.80 1.20 m, Goal depth 0.70 m
The welded goal frame is made of robust aluminium system Standard equipment: natural bright aluminium finish, net hanger
profiles with a diameter of 60 mm and, based on the two 90 made of aluminium tube diameter 40 mm, incl. net with mesh size
bows, forms one single unit. of 45 mm and safety-system net holders

Technical features: Extremely robust and durable design. Cat.-no. 152145


The welded goal frame is made of special-system profiles with a
diameter of 60 mm and forms, based on the two 90 bows, one Accessories: Safety anchoring system of Cat.-no. 1106 (page 30)
single unit.

Net hangers made of robust aluminium tubes with a diameter of


40 mm. The net is attached at the goal frame similar to the large
goals using the safety-system net holders.

The net hangers can be retracted (to save space when storing
them) by untightening the wing nuts and removing the screws at
the upper hinges. Comes with special hinges to fix the net
hanger. Therefore, the ground tube is not necessary anymore
avoiding damage of the ground tube with heavy loads.
Soccer

30
Small goals
Transportable, Type Netherlands, 3 1 m

These goals were developed by the Royal Dutch Soccer Associa- Standard equipment: Natural bright aluminium finish, incl. nets
tion as official goals for 5 to 6 years old children for matches with 100 mm mesh size and Safety system net holders
4 against 4. However, they are also excellently suitable for
training and leisure time purposes. Cat.-no. 1924
Very stable and durable execution. Goal frame of special system
profile 80 40 mm, welded in one piece. Net hoops folding Standard equipment: Goal frame yellow powder coated, remai-
of stable aluminium tubes 40 mm. Net fixing also with the Safety ning construction natural bright aluminium finish, incl. nets with
system net holders, goal depth 0.80 m. 100 mm mesh size and Safety system net holders
In order to meet the different requirements delivery in natural
bright aluminium finish or goal frame yellow powder coated, Cat.-no. 1925
remaining construction natural bright aluminium finish.
Accessories: Safety anchoring system of Cat.-no. 1106 (page 30)

Safety anchoring systems


for small training goals on pitches

We recommend to fix also the small goals and therefore we


developed these anchoring systems.

Cat.-no. 1106
Standard anchoring system, for small training goals of Cat.-no.
15245/152145, 192/19245, 1921/192145, 1923, for small goals
of Cat.-no. 1924/1925 and for street soccer goals of Cat.-no.
19229 (2 anchors for one goal)

Cat.-no. 1107
Standard anchoring system, for small training goals completely
welded of Cat.-no. 172/17245, 1721/172145 and 1723 (2
anchors for one goal)
Soccer

* 31
Supersafe anchoring systems
for freestanding goals on grass pitches

Our contribution for safety of freestanding goals on grass pitches: *For all goal systems with this sign.

All freestanding goals have to be anchored against tipping over acc. to


EN 748/749.
In the past serious accidents have been caused due to unanchored or insufficiently
anchored freestanding goals.
In order to avoid these accidents we developed our Safety anchoring systems which
enable to secure the goals anywhere on pitches acc. to DIN 18035 sheet 4.
Safety has priority. Therefore these Safety anchoring system should be used for every
freestanding goal.
In order to meet the different demands two executions are offered:

Super:
made of very stable spiral-shaped anchors which are screwed into the ground and
fastening plates of galvanized steel.

Standard:
made of simple spiral-shaped anchors and fastening plates of galvanized steel.

2 anchors are supplied for each goal.


Needless to say that Haspo goals already supplied can be retrofitted with these safety
anchoring systems. This is also possible with goals of other marks if there are same
profile dimensions of the ground frames.
Safety anchoring systems for all small training goals are described on page 30.

For soccer goals Transportable of Cat.-no. 109/110 (2 anchors for 1 goal).


Cat.-no. 1102 Super Cat.-no. 11029 Standard

For junior soccer/small pitch goals Transportable of Cat.-no. 120/121, 1209/1219,


140/141, 119 and small handball/street soccer goals of Cat.-no. 1922 (4 anchors for 1
pair of goals).
Cat.-no. 1222 Super Cat.-no. 12229 Standard

For soccer goals Transportable of Cat.-no. 103/104, 1034/1044 and 108, soccer goals
Compact of Cat.-no. 1031/1041/1032/1042, junior soccer/small pitch goals of
Cat.-no. 120/121, 1209/1219, 140/141 and 119 and small handball/street soccer goals
of Cat.-no. 1922 (2 anchors for 1 goal).
Cat.-no. 12221 Super Cat.-no. 122219 Standard Type Super

For junior soccer/small pitch goals and handball goals Transportable of Cat.-no.
1201/1401 and 200/205 (4 anchors for 1 pair of goals).
Cat.-no. 1227 Super Cat.-no. 12279 Standard

For junior soccer/small pitch goals Completely welded of Cat.-no 105/1052/1053/1059,


1054/10524/10534/10594, junior soccer/small pitch goals Compact of Cat.-no.
10511/10521/10531/10591, soccer goals Transportable Type Switzerland of
Cat.-no. 107/1081 and junior soccer/small pitch goals Transportable Type
Switzerland of Cat.-no. 117/118 and 1191 (2 anchors for 1 goal).
Cat.-no. 1228 Super Cat.-no. 12289 Standard

For junior soccer/small pitch goals Completely welded of Cat.-no 105/1052/1053/1059,


1054/10524/10534/10594, junior soccer/small pitch goals Compact of Cat.-no.
10511/10521/10531/10591, junior soccer/small pitch goals Transportable Type
Switzerland of Cat.-no. 117/118 and 1191 (4 anchors for 1 pair of goals).
Cat.-no. 1229 Super Cat.-no. 12299 Standard

Type Standard
Soccer

32 *
Safety base frames
for freestanding goals for all kinds of pitches

*In connection with


Junior soccer goals, Cat.-no. 120/121/1201
Small pitch goals, Cat.-no. 140/141/1401
Handball goals, Cat.-no. 200/205

These Safety anchoring systems for freestanding goals on Standard equipment: Natural bright aluminium finish. Complete
grass pitches meanwhile stood the test and have become an set consisting of 4 pieces Aluminium base frame extension profiles
indispensable accessory for safety. However, in practice, it became 80 40 mm, 2 pieces weighting tanks (unfilled) and incl. all
clear that there was no comparable anchoring system for hard necessary accessories for 1 pair of goals.
pitches, for artificial lawns and also for indoors which also granted
the optimal predection against tilting of goals. This was enough Cat.-no. 1223
reason for us to develop an appropriate practice-oriented Safety base frame for junior soccer goals Transportable for
system. Cat.-no. 120/121, 1209/1219

The result: This Safety base frame. They are simply mounted Cat.-no. 1224
without much sacrifice of time to the base frames of the goals Safety base frame for small pitch goals Transportable for
which results in a depth of 2 m of the complete base frame. The Cat.-no. 140/141, 1922
basic item of this accessory base frame is a tank which is filled
on the spot with quartz sand. If hooked into the extension pieces Cat.-no. 1225
of the base frame an additional weight of appr. 60 kg per goal Safety base frame for junior soccer goals Transportable with
the goal cannot tilt any more during normal use. An optimal Steel net hoops for Cat.-no. 1201, 1205
predection which should by no means be omitted.
Cat.-no. 1226
Technical features: Suitable for all freestanding junior soccer Safety base frame for small pitch goals Transportable with
goals, small pitch goals and handball goals by us. Steel net hoops for Cat.-no. 1401
Strong extension profiles 80 40 mm are simply mounted to the
base frames of the goals. Per goal one weighting tank made of Cat.-no. 2222
aluminium oval profile (for junior soccer goals aluminium square Safety base frame for handball goals Transportable for
profile) is filled on the spot with quartz sand and hooked into the Cat.-no. 200 and handball goals with Folding net hoops
exension profiles. of Cat.-no. 205
If the goals are not used, the weighting tanks are simply taken out
of the holding devices by pupils by means of the incorporated
carrying grips and carried to a storage place. By loosening screws
the extension profiles can be telescoped for space saving storage.
Existing goals with base frames made of aluminium square profile
80 80 mm or triangular profile 80 40 mm can certainly be
equipped with these Safety base frames. This is also possible for
goals of other marks, if there are same profile dimensions of the
ground frames.
Soccer

33
Safety additional weight Mobile
for freestanding goals

Freestanding goals must be adequately secured against


tipping over according to EN 748. This is not possible with most
conventional anchoring systems on plastic or artificial lawns or
hard pitches which is why we developed the safety additional
weights many years ago.

This new design is a logical extension of the previous safety


additional weights which are, of course, still available.

Two transportation wheels with an extra wide wheelbase and a


large welded-on transportation handle guarantee the easy
transport of the mobile additional weight to the goal.

The rollers are made of foamed polyurethane and are thus


puncture-resistant. They have the same running characteristics as
inflated rollers.

The mobile additional weights are simply placed over the ground
frames of the goal. The special advantage of additional weight:
With its unique design, this additional weight adjusts to ground
frames of sizes 120/100 mm, 80 80 mm, 80 40 mm,
75 50 mm and 75 40 mm.

Before use, the additional weight tanks must be filled with quartz
sand.

The empty weight of an additional weight is 15 kg; filled with


quartz sand, 80 kg.

Each goal (7.32 2.44 m, 5 2 m, 3 2 m) needs two additional


weights (1 set).

Standard equipment: Natural bright aluminium finish, complete


set consisting of 2 additional weights (unfilled) for 1 goal, length
of tank 1.50 m, Overall length 1.90 m.

Cat.-no. 1390
Soccer

34
Safety additional weights
for freestanding goals

These Safety additional weights are the optimal solution to Standard equipment: Natural bright aluminium finish, consisting
weight down all freestanding goals on synthetic or hard pitches of 2 additional weights (unfilled), for 1 goal, length 1.50 m
but also on grass pitches.
This construction guarantees a safe stability and the goal is also Cat.-no. 1310
predected against tipping over. For freestanding goals with ground tube of oval profile
The additional weights are easy to handle. The rear tube of the 120/100 mm of Cat.-no. 109 and 110
goal will be situated in the opening between the tanks. Then the
weights will be fixed by 2 hoops which also contain the handles Cat.-no. 1320
for transport of weights. For fixing the net has only to be For freestanding goals with ground tube of square profile
loosened at the hoops and not over the total length of the 80 80 mm of Cat.-no. 108, 119, 103, 104, 1034, 1044, 1031,
weights. As the Safety additional weights are firmly connected 1041, 1032 and 1042
to the ground tube a tipping over of the weights is excluded.
Cat.-no. 1330
Before use the weights have to be filled with quartz sand. For freestanding goals with ground tube of rectangular profile
80 40 mm of Cat.-no. 107, 1081, 117, 118, 1191, 121, 1219,
Each goal (7.32 2.44 m, 5 2 m, 3 2 m) needs two 141, 105, 1052, 1053, 1059, 1054, 10524, 10534, 10594, 10511,
additional weights (1 set). 10521, 10531 and 10591

Combination additional weights/Transportation rollers


The additional weights can be combined with the transportation
rollers (page 35). Weights and rollers are one-time mounted at
the goal. The goal can then easily be moved with filled weights
to any place of the field. Thus there is no need to use an
additional trolley for the transport of the additional weights.
Another assembly and disassembly of the weights is not
necessary.
Soccer

35
Transport trolley for freestanding goals
Using this transport trolley, freestanding soccer, junior soccer and
small pitch goals can be easily transported by one person alone.
All you need to do is lift the goal a bit and push it below one
of the goals bars. Here, the goals balance point must be in the
trolleys centre. The trolley consists of a rectangular profile
80 40 mm. Below the profile, the customer needs to mount
three wheels. Due to its three wheels, the trolley has excellent
running characteristics and cannot tilt.

The wheels have large dimensions to ensure using the trolley even
with rough grounds. Its positive running characteristics are further
enhanced by its pneumatic tires. An aluminium flange is welded
on the two sides of the rectangular profile. Its rail then holds the
bar of the goal. This ensures that the goal has a firm stand. It is
possible to transport goals with base frames made of oval profiles
120 /100 mm, square profiles 80 80 mm and rectangular profiles One of these two trolleys is then affixed to each side of the
80 40 mm, 75 40 mm, 75 50 mm. relevant goal. In combination, the two trolleys form a single unit
together with the goal. Now, the goal can be transported by one
To lock the goal the trolley has two retaining straps. By tightening single person even over longer distances. Especially with goals
these straps the trolley is fixed to the goal (bar). Therefore, the having a dimension of 7.32 2.44 m the advantages are
goal cannot slip out even with extremely rough grounds. obvious. The goals can even be transported with the additional
The rectangular profiles of the trolley are provided with plastic Haspo weights Cat.-no. 1310, 1320 and 1330 mounted to the
caps at both ends. goal. Here, the balance point of the goal will certainly vary;
therefore we recommend using two transport trolleys.
On the side opposite to the trolley, the goal is lifted at the
bars. Therefore, you can move the trolley into all directions. Cat.-no. 1410
Using two transport trolleys, freestanding goals can be
transported more easily.

Transportation rollers
for freestanding soccer, junior soccer and small pitch goals

New execution, so that freestanding goals can be moved easily


and without problems to any other place on the sports ground.
These rollers are not only an advantage for players or the
groundsman but they are also kind to the goals.
An additional equipment which is a must for any sports ground.

Technical features: Available for all freestanding goals with a


ground frame of oval profile 120 /100 mm, square profile
80 80 mm or rectangular profile 80 40 mm.
The transportation rollers made of aluminium supports and
pneumatic wheels of a diameter of 200 mm are simply
mounted and screwed on the rear ground tube.
When the rollers are fixed to the goal the goal is tilted towards
the back. Now it can be moved without problems to any other
place. The rollers need not to be removed. Cat.-no. 11031
Certainly all Haspo goals which are already delivered can Transportation rollers for goals with ground tube of oval profile
additionally be equipped with these rollers. This is also possible 120 /100 mm
for goals of other brands if they correspond with Haspo
dimensions. Cat.-no. 11032
Transportation rollers for goals with ground tube of square profile
Standard equipment: Complete set consisting of two rollers 80 80 mm
for 1 goal
Cat.-no. 11033
Transportation rollers for goals with ground tube of rectangular
profile 80 40 mm
Soccer

36
Spray-line markers Starliner
This new design is the consistent enhancement of our
Spray-line markers Cat.-no. 198, but has significant advantages:
Pressure/paint tank made of transparent plastics, supplied
with the label Starliner
Capacity 11 litres, (instead of 8 litres previously)
With plastic hand pump
Piston manometer incl. safety valve, operating pressure 3 bar
Capacity scale on the pressure/colour tank; ensuring the
operator can see the fill level at all times
The sprayer incl. the spray tube can easily be removed from its
holder to mark even difficult spots such as the penalty spot
No manual lever with cable pull necessary anymore. To mark
lines continuously the sprayer is arrested using the red clamp
located at the sprayer. Upon completion of the spraying
process, simply loosen the red clamp

Characteristics of markers:
complete frame made of robust aluminium profiles
3 easy running wheels with pneumatic tyres 260 85 mm
with synthetic rims
spraying device with flat blast synthetic nozzle, operated by
hand lever
easily adjustable width of line from 50 to 120 mm

Standard equipment: Complete incl. all necessary accessories


but without marking colour

Dimensions:
Length: 1.12 m
Width: 0.72 m
Height: 0.90 m
Empty weight: 9 kg

Cat.-no. 1980
Soccer

37
Spray-line markers Super
Technical features: Dimensions:
large colour pressure tank made of steel with inside coating, Length: 1.22 m
contents 13.5 l, filling capacity 10 l, with hand pump made of Width: 0.72 m
brass, master pressure gauge and safety valve, pressure Height: 0.90 m
6 bar TV tested Empty weight: 14 kg
a constant working pressure is guaranteed by a pressure
reducing valve. Corresponding to the adjustment the pressure Cat.-no. 1981
reducing valve keeps the adjusted pressure which can be
controlled by the pressure gauge of the valve
Therefore not only a constant colour output is guaranteed but
also colour is saved

Spray-line markers Roll-Liner


For many years this simple kind of marking has proved in Standard equipment: as described, but without marking
England and Scandinavia. colour

Construction: strong steel construction enamelled, contents Dimensions:


15 liters. Big pneumatic tyres of 290 90 mm with synthetic Length: 0.95 m
rims. Width: 0.63 m
Height: 0.90 m
Technique: the colour is sprayed on the field by a roller system. Empty weight: 21 kg
Width of roller 100 mm.
Cat.-no. 1986
Working: fill colour in the tank and start rolling-marking will
start. Consumption is regulated by an adjustable spring mounted
brush system. About 8 liters of colour mixture are necessary for
one field.

Maintenance: after having finished marking remove the


remaining colour from the tank. Then clean the tank and the
rollers with water. Nothing is easier.

Marking colour
Special marking colour for grass fields, efficient, high degree of
dilution. Pay attention to this when buying it.

Mixture ration: first marking 1 part colour/3 parts water,


following markings 1 part colour/5 to 7 parts water.

Standard equipment: in strong plastic tanks of 20 kg

Cat.-no. 1982
Soccer

38
Players cabin United

The newest generation of the players cabin not only offers an Standard equipment: complete with bench and all parts
innovative new design, it has special advantages through its easy needed for assembly.
assembly and increased stability. Note: Delivery does not include bucket seats.
The optimal wind and weather protection has received an
attractive new look from a new side design where the sides are Dimensions:
drawn downward to the inside. Width: 3 m, 4 m und 5 m
By using plug-in rubber seals to fix the side panes into the Height: 2.14 m
aluminium profiles and the struts in the side elements, these Upper depth: 1.31 m
components are extremely robust. Lower depth: 0.94 m
With significantly fewer connections between the sides, roof and
rear wall, the assembly is childs play and at the same time, Sides completely of clear polycarbonate plates,
increases the stability. Rear wall and roof plates of polycarbonate hollow-
The substructure of the bench is directly mounted to the rear chamber plates:
wall and thus forms an extremely solid and uniform visual unit
with the entire cabin. Cat.-no. 1813 Width 3 m
The already high bar of the players cabin World Champion
has been once again raised a bit higher. Cat.-no. 1814 Width 4 m

We can supply 3 standard sizes: Cat.-no. 1815 Width 5 m


Width 3 m: 6 7 persons
Width 4 m: 8 9 persons Sides, rear wall and roof plates of clear polycarbonate
Width 5 m: 10 11 persons plates:

The cabin comes in the standard execution with clear Cat.-no. 18131 Width 3 m
polycarbonate plates on the sides as well as polycarbonate
hollow-chamber plates on the roof and rear wall. For an Cat.-no. 18141 Width 4 m
additional charge, the complete cabin is available in clear
polycarbonate plates. Cat.-no. 18151 Width 5 m

Technical features: You can choose between widths 3 m, 4 m Accessories: Transportation rollers, consisting of 4 holders and
and 5 m. Extremely stable construction and very easy to assemble 4 plug-in wheels (see detailed photo on page 39), bucket seats
thanks to the use of durable, special hollow-chamber profiles. for players cabins (page 41)
Pressure-treated bench slats and mounting brackets for ground
anchoring which are already welded on to the interior at the
factory are included in the delivery scope.
The number of connection points has been reduced to a
minimum and only high-quality components are used making
assembly quick and easy.
Soccer

39
Players cabin Exclusive

[2]

[1] [3]

Due to the elegant design and the very stable construction Standard equipment: Complete with bench, wooden grille
our players cabins Exclusive have firmly established on the and all necessary assembly material.
market during the last years:
with round shaped roof, which shows a more elegant design. Dimensions:
Width: 3 m, 4 m and 5 m
Side parts of plexiglass, which offer an excellent view. Height in front: 2 m
Height at the back: 1.65 m
We can supply three standard sizes: Upper depth: 1 m
Width 3 m: 6 7 persons Lower depth: 0.90 m
Width 4 m: 8 9 persons
Width 5 m: 10 11 persons Photo 1: Side parts of plexiglass, rear wall and roof of
polycarbonate hollow-chamber plates:
These players cabins Exclusive offer a perfect predection
against storm and rain and should exist on each field. Cat.-no. 1903 Width 3 m

Additional income is necessary for each club. The players cabins Cat.-no. 1904 Width 4 m
Exclusive offer enough space for publicity purposes.
Standard execution is with roof and rear wall of polycarbonate Cat.-no. 1905 Width 5 m
hollow-chamber profiles with UV predection.
Photo 2: Side parts, rear wall and roof of clear plexiglass:
Additional cost for delivery of clear plexiglass plates.
Cat.-no. 19031 Width 3 m
Technical features: You can choose between widths of 3, 4
and 5 m. Cat.-no. 19041 Width 4 m

Very important: height in front 2 m. The complete frame Cat.-no. 19051 Width 5 m
construction consists of special stable aluminium hollow-chamber
profiles, the side parts of which being supplied as welded Accessories (Photo 3): Transportation rollers, consisting
elements. Bench and wooden grille are surely included. To fix the of 4 holding devices and 4 rollers (see detailed photo).
cabin in the ground anchoring angles are welded at the side parts.
High-quality structual components guarantee a quick and easy Cat.-no. 1910
assembly.
Bucket seats for players cabins (page 41)
Soccer

40
Players cabin World Champion
New construction and modern design. Elegant round shaped Standard equipment: Complete with bench, wooden grille
roof. In addition there is a depth of 1.28 m and a height of and all necessary assembly material.
2.11 m so that all persons are optimally predected in all weathers.
Utmost stability is guaranteed. Dimensions:
Width: 1 m, 2 m, 3 m, 4 m, 5 m and 6 m
Delivery of 6 standard sizes: Height: 2.11 m
Width 1 m: for the 4th refree Depth: 1.28 m
Width 2 m: 4 persons
Width 3 m: 6 7 persons Upper side parts of clear polycarbonate plates. Lower
Width 4 m: 8 9 persons side parts, rear wall and roof plates of polycarbonate
Width 5 m: 10 11 persons hollow-chamber plates:
Width 6 m: 12 13 persons
Cat.-no. 1911 Width 1 m
Upper side parts of the standard execution are of clear polycar- Cat.-no. 1912 Width 2 m
bonate plates and lower side parts as well as roof and rear wall Cat.-no. 1913 Width 3 m
are of polycarbonate hollow-chamber profiles with Cat.-no. 1914 Width 4 m
UV predection. Cat.-no. 1915 Width 5 m
Additional costs for a complete execution of clear polycarbonate Cat.-no. 1916 Width 6 m
plates.
Side parts, rear wall and roof plates of clear
Technical features: We deliver widths of 1 m, 2 m, 3 m, 4 m, polycarbonate plates:
5 m and 6 m. Extreme tough constructions. The complete frame
construction consists of special stable hollow-chamber profiles. Cat.-no. 19111 Width 1 m
The side parts are supplied as completely welded elements incl. Cat.-no. 19121 Width 2 m
panes. Cat.-no. 19131 Width 3 m
Bench and wooden grille are surely included. Bench boards are of Cat.-no. 19141 Width 4 m
thermal whitewood, grille is preserved by boiler pressure. To fix Cat.-no. 19151 Width 5 m
the cabin in the ground 2 anchoring angles each are welded at Cat.-no. 19161 Width 6 m
the inside bottom of the side parts.
High-quality structual components guarantee a quick and easy Accessories: Transportation rollers, consisting of 4 holding
assembly. devices and 4 rollers (see detailed photo on page 39),
Bucket seats for players cabins (page 41)
Soccer

41
Bucket seats for Haspo players cabins
The bucket seats are only screwed on the bench of the players cabin United,
Exclusive or World Champion with special fixing parts.
This is a simple assembly without additional boring. It goes without saying that
already existing players cabins can be equipped with these bucket seats.
As the standard execution of players cabins United, Exclusive or World
Champion is not modified, we supply the seats in an additional box together
with the fixing material.

Standard equipment: Bucket seats with fixing material

Cat.-no. 192002 Width 1 m (2 seats)


Cat.-no. 192004 Width 2 m (4 seats)
Cat.-no. 192006 Width 3 m (6 seats)
Cat.-no. 192008 Width 4 m (8 seats)
Cat.-no. 192010 Width 5 m (10 seats)
Cat.-no. 192012 Width 6 m (12 seats)

Ball heading practice units


1-armed and 2-armed unit

To allow purposeful training in ball heading skills, these practice units have been
developed, and no club should be without them.

Technical features: Simple yet rugged and functional single-arm unit.


For insertion into ground socket. Height above ground 4.50 m, arm length 1.65 m.
Particularly steady and torsion resistant due to bracing between upright and
arm. The unit is rigidly located in the ground socket by use of a special wedge.
Simple, one-handed, infinitely variable ball height adjustment.

Standard equipment: Matt silver anodised finish.

Cat.-no. 160
Incl. bracing, ground socket insertion depth 500 mm with cover and special wedge,
but without rope and ball

Technical features: Rugged functional 2-armed unit. For insertion in ground socket.
Height above ground 6 m, arm length 2.50 m each side.
Particularly steady and torsion resistant due to bracing between upright and arms.
The unit is rigidly located in the ground socket by use of a special wedge.
Training can be carried out independently on either arm as the height of the ball in each
case can be separately adjusted.

Standard equipment: Matt silver anodised finish.

Cat.-no. 170
Incl. bracings, ground socket insertion depth 500 mm with cover and special wedge,
but without ropes and balls

Cat.-no. 181
Captive ball, size 5, lether

Cat.-no. 182
Captive ball cord of 5 mm thick perlon, plaited, 12 m long, with swivel clip and loop
Soccer

42
Barriers

[1]

[2]

[3]

Hand-crafted and rapidly corroding steel barriers are now at last Following accessories can be delivered at additional costs so
a thing of the past thanks to the new Haspo barriers. that this system can be universally used:

This barrier is of all-aluminium manufacture and can therefore no Cat.-no. 1961


longer rust; it is absolutely maintenance-free, since the tubes are 90 degree bow as aluminium cast shaped part for perfect angle
anodised. Every sports ground will gain by it. connection (see detail photo 1)

An investment with fast payoff no more follow-on costs. Cat.-no. 1962


Corner joint horizontal as cast corner joint, variable from 0 to
Technical features: The system consists of 60 2.5 mm 180 degrees (see detail photo 2)
aluminium tubes used for both handrail and upright. The spacing
is 2500 mm and the height of the upright above ground Cat.-no. 1963
1100 mm. Stair joint vertical as cast corner joint,
variabel from 55 to 90 degrees (without photo)
The handrail/upright/handrail joints are extremely stable, precise-
fitting, and elegantly shaped T-form aluminium castings into Cat.-no. 1964
which the tubes are simply inserted and affixed through the Connection joint as aluminium cast joint, variable for additional
premarked drillholes. bar (see detail photo 3)

Simple assembly and therefore best suited to private Cat.-no. 1965


installation on the basis of ones own resources Telescope tubes for passages, width 2500 mm, length 4000 mm
(without photo)
Standard equipment: Matt silver anodised finish
Cat.-no. 1966
Cat.-no. 196 Aluminium tube 60 2.5 mm for additional tube, length
Incl. all necessary mounting materials 2490 mm (without photo)
Soccer

43
System barriers
special devices for affixing perimeter advertising elements

So far, perimeter advertising elements are mounted to the stand Cat.-no. 19620
tubes using clamps, resulting in a clumsy optical appearance, since Incl. all necessary mounting materials. Comes with all clamping
the holders are positioned over perimeter advertising elements and elements required for the standard installation (more stand tubes
are, thus, still visible. and aluminium cast parts in T-shape are charged additionally),
Reasons enough for us to develop an optimal solution for this without clamping elements for perimeter advertising elements
problem which allows affixing the perimeter advertising elements (See detail photo 1)
more easily and invisibly.
Our approach: a special profile for the stand tubes with a profile Cat.-no. 19630
groove, in which the clamping elements for the perimeter Clamping elements for perimeter advertising elements, incl. speed
advertising elements can be easily screwed onto. The continuous nuts and screws (See detail photo 2)
groove within the stand tubes guarantees that the perimeter
advertising elements are quickly affixed at varying heights without The accessories for the barriers described on page 42 are also
any problems and nearly invisible. available for these system barriers.

Technical features: The system consists of 60 2.5 mm [2]


aluminium tubes used for both handrail and upright. The spacing
is 2500 mm and the height of the upright above ground
1100 mm.

The handrail/upright/handrail joints are extremely stable, precise-


fitting, and elegantly shaped T-form aluminium castings into which
the tubes are simply inserted and affixed through the premarked
drillholes.

Standard equipment: Matt silver anodised finish

[1]
Soccer

44
Uprights for ball catching fences
Until now ball catching fences have mostly been made of steel Cat.-no. 6505
tube. The disadvantages are well known i. e. they rust quickly. Ball catching upright,
The Haspo ball catching uprights are made of special aluminium height above ground 5 m
profile 80 80 mm, matt silver anodised finish, so that rust
formation is excluded. Cat.-no. 6506
In order to meet the different requirements uprights with lengths Ball catching upright,
of 4 m, 5 m and 6 m can be supplied. height above ground 6 m
The uprights are erected in ground sockets insertion depth
500 mm and have to be concreted.
Maximum distance between uprights is 5 m.
Only mesh sizes of 10 cm or 12 cm can be used.

Standard equipment: Matt silver anodised finish, incl. upright


covers, eyebolts, Safety system net holders and ground socket
insertion depth 500 mm

Cat.-no. 6504
Ball catching upright, height above ground 4 m

Cross arms for ball catching uprights


In addition we can supply also cross arms of special profiles Standard equipment: Length of cross arms 4920 mm for a
80 40 mm which should be used for ball catching fences from distance between uprights of 5000 mm, incl. all necessary
20 m, i.e. between the two last uprights. connecting pieces.
Thus it is guaranteed that the last uprights will not bend.
Cat.-no. 6510

Free-kick-dummy-wall
width 2.70 m, height 1.80 m

Very robust design. Completely made of solid galvanized steel Standard equipment: Complete incl. all necessary accessories
tubes, therefore optimum surface protection.
Cat.-no. 197
The dummies are dressed with a textile clothing which can be
removed and cleaned if necessary. The dummies are mobile and
return to their original position after they had been hit by the
ball. Excellent stability due to long fixations to keep the dummies
erect. Easy transportation due to steering wheels, two of which
are equipped with locking devices.
Extremely variable since any of the five dummies can be easily
removed and thus varying situations of the game can be trained.
Easy assembly and disassembly, since this free-kick-dummy-wall
is consisting of two lateral parts into which simply a connecting
tube is put for insertion of the dummies. Those are just hung
up ready for use immediately.
Soccer

45
Beach soccer goals
5.49 2.21 m

45

These goals are equipped with the special profiles 120 /100 mm of
the Haspo soccer goals and a yellow powder coating. They
correspond to the construction of the goals For insertion into
ground sockets. The only differences are the goal size and the
special ground sockets.
The ground sockets are simply dug in the sand.
We recommend to load the net with chains in the ground area.

Standard equipment: Yellow powder coated finish.


Incl. net hoops and net hoop braces of aluminium tube, diameter Crossbar/uprights
30 mm, Safety system net holders and special ground sockets
insertion depths 300 mm with covers (see photo).

Cat.-no. 180

Handball

Beach handball goals


32m

Goal frame of special aluminium profile 80 80 mm with yellow


powder coated finish. Inside dimensions 3 2 m.
Same construction as of beach soccer goals.

Standard equipment: Yellow powder coated finish.


Incl. net hoops and net hoop braces of aluminium tube, diameter
30 mm, Safety system net holders and special ground sockets
insertion depths 300 mm with covers (see photo).

Cat.-no. 280
Handball

Handball goals
with aluminium cast corner joints, 3 2 m

46
This established handball goal systems naturally acc. to EN 749 The stability of the complete goal construction is additionally
and TV-tested with convincing improvements and novelties. increased by the ground tubes made of galvanized steel which
are screwed between the net hoops in floor area.
There are no comparable aluminium goals of same stability and Top class handball goals meeting the high requirements of
strength. modern handball.
Many goal constructions with net hoops of only 30 mm alumi-
nium tubes are still in the market, but they have the disadvan- Anchoring of the goals is done acc. to DIN. The net hoops are
tages of lacking stability. They can bend and partly even break. already equipped with relevant borings. For Anchoring systems
please see page 50.
These problems were certainly solved by using a net hoop
construction made of galvanized steel tubes. Cat.-no. 200/205
Anchoring acc. to EN 749
Specially long flat-iron angles welded to the net hoops which
must be screwed to the goal construction at crossbar/upright
area, add additional safety to this corner area apart from the
solid mold aluminium corner joints.

The upper goal depth is 1.10 m with all handball goals; the lower depth is 1.30 m.
At no extra charge, goals can be delivered with goal depths (upper/lower) of 0.80 m, 0.90 m and 1 m.

The Haspo German registered patent


screw recess in the crossbar/upright
construction problem area.

1-piece net hoops construction made of


specially strong galvanized steel tubes.

Ground tube made of galvanized steel

Floor anchoring system to EN 749


Handball

Handball goals
Transportable, For insertion into ground sockets, with aluminium cast corner joints, 3 2 m

47
Technical features: these goals are also supplied with the safety screws
a construction with specially strong net hoops made of Safety system net holders
galvanized steel tubes quick, simple assembly and disassembly
no slip-on connections, therefore extremely stable and robust
novel net hoop construction: the net hangs freely between the Standard equipment: Matt silver anodised finish with black or
net hoops optionally red plastic stripes.
rebounding of the ball is therefore impossible
extremely stable and precise-fitting cast aluminium corner joint
rounded edges, thereby reduction of injury risk
no damage to the gymnasium floor. Tube and upright covers
prevent contact of aluminium/steel parts with the floor of the
gymnasium

Transportable,
with Rigid net hoops
Cat.-no. 2006 black/silver
Cat.-no. 2007 red/silver
Anchoring acc. to EN 749 and TV
Incl. net hoops, net hoop supports and ground tubes made
of galvanized steel tube, upright cover and Safety system net
holders

Aluminum handball goal Transportable

For insertion into ground sockets


with Rigid net hoops
Cat.-no. 2016 black/silver
Cat.-no. 2017 red/silver
Acc. to EN 749 and TV
Incl. net hoops, net hoop supports and ground tubes made of
galvanized steel tube, upright covers, Safety system net holders
and ground sockets insertion depth 300 mm with covers.

Aluminum handball goal For insertion into ground sockets


Handball

*
Handball goals
Transportable, For insertion into ground sockets, with aluminium cast corner joints, 3 2 m

48

For insertion into ground sockets


Cat.-no. 2026* black/silver
Cat.-no. 2027* red/silver
Acc. to EN 749 and TV
Without net hoops (net bracing on hall wall). Incl. upright sealing covers, Safety system
net holders and ground sockets insertion depth 300 mm with covers

Transportable,
with Folding net hoops
Cat.-no. 2056* black/silver
Cat.-no. 2057* red/silver
Acc. to EN 749 and TV
Incl. net hoops, net hoop supports and ground tubes made of steel tube galvanized,
upright covers and Safety system net holders

For insertion into ground sockets


with Folding net hoops
Cat.-no. 2066* black/silver
Cat.-no. 2067* red/silver
Acc. to EN 749 and TV
Incl. net hoops, net hoop supports and ground tubes made of galvanized steel tube,
upright covers, Safety system net holders and ground sockets insertion depth
300 mm with covers

Transportable
Cat.-no. 2076 black/silver
Cat.-no. 2077 red/silver
Crossbar/upright construction only, Incl. upright covers and
Safety system net holders

Additional crossbar for mini handball games


Cat.-no. 2086 black/silver
Cat.-no. 2087 red/silver
Incl. all necessary mounting materials.

For reduction in the 3 2 m goal size to 3 1.60 m (clear dimensions). The additional
crossbar may be inserted into all available goals with just a few manipulations.
The upright and additional crossbar are joined by means of stable mounting plates and
handwheels for fast fittingand removal as easy as winking.
The additional crossbar fits all our handball goal systems as standard.
If other goals are involved, please indicate material and send in sketch of cross section.
Handball

Handball goals
Transportable, For insertion into ground sockets, with patented steel corner joints, 3 2 m

49
Patented steel
corner joints

1-piece net hoop


construction made of
special stable galva-
nized steel tubes

Galvanized steel
ground tube

Floor anchoring system


acc. to EN 749

Especially the corners of the crossbar/upright construction of Standard equipment: Matt silver anodised finish with black or
handball goals heavily stressed. Therefore a stable corner joint is optionally red plastic stripes.
very important so that we developed this patented corner joint.
Cat.-no. 2009/2059
This corner joint is made of galvanized steel laser parts and Anchoring acc. to EN 749 and TV
guarantees stability and long durability. There is no more stable
corner joint.

Another advantage is that there are no visible screwings at


crossbar/uprights, as the net hoop construction is directly screwed
to the corner joints from the back through the goal profile.
Apart from the corner joints these goals correspond to the
construction of Cat.-no. 200, 201, 202, 205 and 206 and are also
equipped with Safety system net holders.

We offer handball goals of a top quality at reasonable prices.


Anchoring of the freestanding goals is done acc. to EN.

The net hoops are already equipped with corresponding borings.

For Floor anchoring systems please see page 50.


Handball

Handball goals
Transportable, For insertion into ground sockets, with patented steel corner joints, 3 2 m

50
Transportable
with Rigid net hoops with Folding net hoops
Cat.-no. 20096 black/silver Cat.-no. 20596 black/silver
Cat.-no. 20097 red/silver Cat.-no. 20597 red/silver
Anchoring acc. to EN 749 and TV

Incl. net hoops, net hoop braces and ground tubes made of galvanized steel tube,
upright covers and Safety system net holders

For insertion into ground sockets


with Rigid net hoops with Folding net hoops
Cat.-no. 20196 black/silver Cat.-no. 20696 black/silver
Cat.-no. 20197 red/silver Cat.-no. 20697 red/silver
Acc. to EN 749 and TV

Incl. net hoops, net hoop braces and ground tubes made of galvanized steel tube,
upright covers and Safety system net holders and ground sockets insertion depth
300 mm with covers

For insertion into ground sockets


Cat.-no. 20296 black/silver
Cat.-no. 20297 red/silver
Acc. to EN 749 and TV

without net hoops (net bracing at hall wall), incl. upright covers, Safety system net
holders and ground sockets insertion depth 300 mm with covers

Anchoring systems
for handball goals

Cat.-no. 212 Cat.-no. 213 Cat.-no. 214


Double Rubber Sucker for fastening to hall Installation Set for hall floors Installation Set for freestanding units
floor (Export Model) Consists of 4 admission plates and eyebolts Consists of 4 floor anchors with welded-in
Only for use on absolutely smooth floor; for 1 pair of goals. One hundred percent thread and eyebolts for 1 pair of goals.
8 units required for 1 pair of goals. stable mounting. In the region of the Freestanding goals have so far generally
Only for handball goals of Cat.-no. mounting points on the goals, the floor been only temporarily mounted. This
200/205, 2009 and 2059. covering is removed and the admission installation set the floor anchors are
plates inserted and bolted in position. concreted in assures absolute stability of
the goals.
Handball

Handball goals
blue/silver

51

Note: All handball goals shown are also available in blue/silver at no extra charge.

Mini handball goals


Transportable, with Folding net hoops, 2.40 1.60 m

This goal is based on the construction of the handball goals of


Cat.-no. 205 (page 46). The only difference is the goal size.
Thus a top class goal is also available for mini handball matches.
Goal depth top/bottom 1 m.

Standard equipment: Matt silver anodised finish with black or


red plastic stripes.

Cat.-no. 2156 black/silver

Cat.-no. 2157 red/silver


Hockey

Outdoor hockey goals


all aluminium, acc.to EN 750, 3.66 2.14 m

Technical features: Crossbar/upright construction complying Standard equipment: White powder coated finish for crossbar/
with international regulations of especially thick walled upright construction. Dimensions acc. to international regula-
aluminium profiles 75 50 mm with groove for Safety system tions (inside dimensions 3.66 2.14 m), incl. net hoops, ground
52 net holders. frame, barriers and Safety system net holders.
Stable net hoops made of 40 mm diameter aluminium tubes.
Welded base frame structure of solid aluminium U and angle Cat.-no. 300
profiles into which the boards may be inserted and thus removed
at any time. Cat.-no. 3001
Barriers are of special stable hollow chamber barrier profiles. The Transportation rollers for Outdoor Hockey goals
hollow chambers are additionally filled with wood cores. (for 1 pair of goals)
Quick, simple assembly.
If the transportation rollers are used the goals can easily be Cat.-no. 3002
pushed at every place you want. Barrier stuffing of 10 mm Regupol-black (for 1 pair of goals)

Barrier stuffing of 10 mm Regupol-black can be delivered


against additional cost.

50
75

Crossbar/uprights
Tennis

Tennis uprights Cat.-no.: 500


square and round, Tennis uprights square
with ground sockets
for outdoor and indoor courts acc. to EN 1510

We offer Haspo tennis uprights in square profile 80 80 mm


or round profile of 83 mm diameter.
All square uprights can be supplied with insertion elements.
They enable to replace uprights without changing the concreted
round ground sockets. Thus foundation operations and conse-
quently damages to the court surface are eliminated.

Technical features: 53
functional and elegant design
extremely stable as they are provided with a special aluminium
alloy and thick-walled profiles
internal tensioning unit which is concealed and protected
against the elements
quick and easy tensioning and release of net by use of a Ground sockets for
special spindle Cat.-no. 500

no rolling of net rope so that a long net rope life is guaranteed


detachable crank kept in the top of the upright,
therefore it is always ready to hand, no searching
with aluminium net holding rods and rust-resistant mounting
hooks
cast aluminium and rope guide covers

The round uprights are additionally equipped with a double


groove so that the rope hook at the opposite upright can
be adjusted continuously variable. Thus different rope lengths
can easily be compensated.

Cat.-no.: 502
Tennis uprights square and round with ground sockets: Tennis uprights round

Matt silver anodised finish or white respectively green powder


coated against additional cost (see price list).
Incl. aluminium net holding rods and rust-resistant mounting
hooks, special stable ground sockets insertion depth 350 mm
with covers.

Cat.-no. 500

Cat.-no. 502

Tennis uprights square


For existing round ground sockets:
Matt silver anodised finish insertion depth 225 mm. The special
insertion elements are supplied with stud diameters of 60 mm,
76 mm or 80 mm. Cat.-no.: 501
Tennis uprights square For
existing round ground sockets:
Cat.-no. 501
Tennis

Tennis unit
Transportable

Technical features: A novel idea pioneered in the USA and Standard equipment: Matt silver anodised finish incl. all
reshaped by ourselves to match European conditions. accessories.

With this tennis unit, it is possible to play tennis anywhere there Cat.-no. 503
is no tennis court or floor sockets are neither available nor can
be fitted. Cat.-no. 5031
Additional weight to improve stability under special high loading
A unit specially created for school and broad-based sporting (4 weights each of around 5 kg)
54 activity, but also for additional installation in gymnasia to create
further playing areas without major expense. Cat.-no. 5032
Aluminium tennis net support for Transportable tennis unit
With all the advantages of tennis uprights, Cat.-no. 500.

This unit is used e. g. at WTA Tournaments, Swiss Indoor


and Davis Cup Tournaments.

Special design features:


folding net uprights and feet
split floor support
assure extremeley space-saving storage
easy assembly and disassembly

Low weight, which is especially advantageous for school games.


Tennis

Tennis unit for children


Transportable

Only with this tennis unit Transportable a specific built-up The net net size 6 0.80 m is fastened with the net holding
training is possible which is at the same time fun for the children rods between the posts. At the outside of the posts a quick-
since training without fun is quickly given up by children and then acting clamping device is mounted into which the rope is simply
important young talents are suspended and tensioned.
missing. Therefore learning to play tennis quite easily with this
tennis unit Transportable. Standard equipment: Matt silver anodized finish incl. net and
all accessories.
The tennis unit is set up such that one normal tennis court is
divided into two children tennis courts. Thus the limited courts Cat.-no. 507 55
can be used optimally. It is not necessary to take away posts and
nets of the standard court.

Due to the well-devised construction slip-on posts/base


construction and ground tubes in 2 pieces therefore
transportation length only 3 m and the low weight, this tennis
unit can be stored space-saving and is ready for use in no time.

Technical features: Posts with welded-on feet made of specially


strong aluminium special profiles 80 40 mm.

The round divisible ground tube of aluminium 60 2.5 mm is


simply slipped on to the welded-on pivot of the posts/base
construction and locked with the net holding rods.

Tennis accessories
Tennis net supports
For setting the regulation net height for individual games.
Fork-shaped rounded net support to prevent net damage.
High stability thanks to well-dimensioned disc feet.

Standard equipment: Natural bright aluminium finish

Cat.-no. 504

Ground anchoring socket


For receipt of web turnbuckle.
Made of thick-walled aluminium tubing, total length 250 mm,
with cover and recessed hook.

Standard equipment: Natural bright aluminium finish,


with cover

Cat.-no. 5094
Tennis

Umpires chair
Folding

The umpires chair matched to the most stringent requirements


there is no better. A proven construction which has thoroughly
stood the test of time both at home and abroad.

These facts speak for themselves, though a number of


technical features should be highlighted:
Extremely stable, steady and elegant design. Maintenance-free
assured by aluminium finish. Folding feature provided
56 through application of special hinges between seat and support.
Space-saving storage is thereby assured.
Ladder part with especially wide and non-slip steps. Matching
spars are also made of wide special profiles.
Stability assured by disc feet. Through bores in the disc feet,
additional anchoring of the chair by ground pegs is possible.
Fatigue-free and comfortable sitting posture by application
of a UV-resistant perforated moulded seat plastics of correct
anatomical design.
Wide writing board of weatherproof plastics.
Low freight costs, since the unit is packaged in two cartons.

Standard equipment: Natural bright aluminium finish.


Incl. UV-resistant, perforated plastic moulded seat, writing board,
string bag, disc feet, and 2 clothes hooks.

Cat.-no. 505

Tennis bench
Stable and elegant construction with all-aluminium subframe.
Especially steady due to high weight and disc feet.

Dimensions:
Length: 2m
Width: 0.37 m
Height: 0.46 m

Technical features:
All-aluminium subframe 3 piece with additional crossbracing
and disc feet.
Seat bars 3 lengths of white plastics hollow-chamber profiles
with galvanized steel profile inserts and end caps.

Standard equipment: Natural bright aluminium finish.

Cat.-no. 506
Volleyball

Volleyball uprights
acc. to EN 1271 and DVV-Norm I, with spindle tensioning device

There are already volleyball uprights of a top quality but at high prices. Thus only a few
customers are able to afford them.
To satisfy the demand for extremely stable uprights at reasonable prices with all
requirements of modern equipment and provided with the label DVV I of the German
Volleyball Associoation we developed this product.
volleyball uprights with tensioning/holding device completely sunk-in upright
extremely stable and this without additional reinforcement of steel at the inside
low risk of deflexion due to special thick-walled profiles
infinitely variable net height adjustment from 1.55 to 2.50 m, single-part clamping/
holder device
to be supplied in square execution 80 80 and round 83 mm diameter
on demand both executions can be supplied with insertion elements for existing
round ground sockets
57
The high quality and safety standard of these uprights is certified by the label of the
DVV.

Technical features: Functional and elegant design with built-in chambers for covered
receipt of tensioning and holding device.
Even if the net is fully tensioned, a continuous variable net height adjustment for
heights from 1.55 to 2.50 m is possible.
extremely stable due to special thickwalled profiles, very low risk of deflexion
quick assembly and disassembly
quick, easy tensioning and release of net due to a special spindle
no rolling up of net rope, thus long durability of net and rope
simple infinitely variable height adjustment of the net with one hand by means of a
removable crank

Standard equipment: Matt silver anodised finish.


* The special insertion elements are regularly supplied with tube sockets of 60, 76 or
80 mm.

Cat.-no. 531
Volleyball uprights square 80 80 mm
Incl. rustproof net hooks, ground sockets insertion depth 350 mm with covers

Cat.-no. 5311
Volleyball uprights square 80 80 mm
For existing round ground sockets
Incl. rustproof net hooks and special insertion elements insertion depth 225 mm*

Cat.-no. 532
Volleyball uprights round 83 mm diameter
Incl. rustproof net hook, ground sockets insertion depth 350 mm with covers

Cat.-no. 5321
Volleyball uprights round 83 mm diameter
For existing round ground sockets
Incl. rustproof net hooks and special insertion elements insertion depth 225 mm*

Insertion elements
Volleyball

Volleyball uprights
acc. to EN 1271 and DVV-Norm II, with spindle tensioning device

These Volleyball uprights correspond to the uprights DVV I Cat.-no. 514


described on page 57 and are only different in net height Volleyball uprights 83 mm diameter
adjustment which is only possible when the net is slightly Incl. rustproof net hooks, ground sockets
released. The tensioning/holding device comes in two parts. insertion depth 350 mm with covers

Standard equipment: Matt silver anodised finish Cat.-no. 5141


Also available with yellow powder coating. Additional price see Volleyball uprights round 83 mm
price list. diameter
* The special insertion elements are regularly supplied with tube For existing round ground sockets
sockets of 60, 76 or 80 mm. Incl. rustproof net hooks and special
insertion elements insertion depth
Cat.-no. 513 225 mm*
Volleyball uprights square 80 80 mm Volleyball uprights with insertion elements
58
Incl. rustproof net hooks, ground sockets insertion depth do not have labels of the DVV.
350 mm with covers

Cat.-no. 5131
Volleyball uprights square 80 80 mm
For existing round ground sockets
Incl. rustproof net hooks and special insertion elements
insertion depth 225 mm*
Volleyball uprights with insertion elements
do not have labels of the DVV.

Volleyball uprights
square and round, acc. to EN 1271, with spindle tensioning device

To satisfy different demands, we developed this cheaper alterna- Cat.-no. 5151


tive to the uprights DVV I resp. DVV II. Volleyball uprights square 80 80 mm
For existing round ground sockets
Regarding material, the uprights correspond exactly to those of Incl. rustproof net hooks and special
the execution DVV I/DVV II but this system consists of a one-part insertion elements insertion depth 225 mm*
tensioning and holding device.
Cat.-no. 516
The result is a cheap solution without renouncing stability and low Vollyball uprights round 83 mm diameter
risk of deflexion. Incl. rustproof net hooks, ground sockets
insertion depth 350 mm with covers
Technical features: Same construction as uprights DVV I/DVV II
but: 1-part tensioning and holding device. Cat.-no. 5161
Volleyball uprights round 83 mm diameter
Standard equipment: Matt silver anodised finish. For existing round ground sockets
Also available with yellow powder coating. Additional price see Incl. rustproof net hooks and special insertion
price list. elements insertion depth 225 mm*
* The special insertion elements are regularly supplied with tube
sockets of 60, 76 or 80 mm.

Cat.-no. 515
Volleyball uprights square 80 80 mm
Incl. rustproof net hooks, ground sockets
insertion depth 350 mm with covers
Volleyball

Volleyball uprights Standard


square and round, with spindle tensioning device

These uprights Standard have proved during the past years and
were successfully in the market. Instead of steel uprights which
sometimes are still used you can better use these uprights
equipped with many advantages of aluminium.

Due to the special aluminium alloy and thick-walled profiles they


are very stable.

Standard equipment: Matt silver anodised finish.

Cat.-no. 510
Volleyball uprights square 80 80 mm
Incl. rustproof net hooks, ground sockets
59
insertion depth 350 mm with covers

Cat.-no. 512
Volleyball uprights round 83 mm diameter
Incl. rustproof net hooks, ground sockets
insertion depth 350 mm with covers

Volleyball uprights
central uprights for multiple courts, with spindle tensioning device

Technical features: Multiple courts are the ideal solution to the


space problem for practice games. The central upright has been
designed for this purpose, combining the same technical features
as the volleyball uprights of Cat.-no. 510 and 512.

The built-in opposite guide-rails for receipt of tensioning and


holding devices ensures that the nets may be steplessly and
independently set to the required heights at both upright sides.

Standard equipment: Matt silver anodised finish.


Incl. rust-resistant net hooks, ground sockets insertion
depth 350 mm with covers and one tensioning and one
retaining device.

Cat.-no. 5101
Central upright for multiple courts square 80 80 mm

Cat.-no. 5121
Central upright for multiple courts round 83 mm diameter
Volleyball

Volleyball uprights
acc. to EN 1271 and DVV-Norm I, with pulley tensioning device

These uprights with pulley are a consequent development of the Cat.-no. 5312
uprights with tension machanism/crank. Volleyball uprights square 80 80 mm,
The special profiles of these uprights are identical with those For insertion into ground sockets
being used until now.
Instead of the tension mechanism with crank we installed a pulley Cat.-no. 53112
system, which guarantees an easy and quick tensioning of the net Volleyball uprights square 80 80 mm,
even up to a net tension of 150 kg without being effort. For existing round ground sockets
There are no problems with damaged joints or cranks. Volleyball uprights with insertion elements
do not have labels of the DVV.
Standard equipment: Matt silver anodised finish.
Also available with yellow powder coating (see price list). Cat.-no. 5322
* The special insertion elements are regularly supplied with Volleyball uprights round 83 mm diameter,
tube sockets of 60, 76 or 80 mm For insertion into ground sockets
60
Volleyball uprights For insertion into ground sockets Cat.-no. 53212
Incl. rustproof net hooks, ground sockets insertaion depth Volleyball uprights round 83 mm diameter,
350 mm with covers For existing round ground sockets
Volleyball uprights with insertion elements
Volleyball uprights For existing round ground sockets do not have labels of the DVV.
Incl. rustproof net hooks and special insertion elements
insertaion depth 225 mm

acc. to EN 1271 and DVV-Norm II, with pulley tensioning device

Standard equipment: Matt silver anodised finish. Also Cat.-no. 5142


avaliable with yellow powder coating (see price list). Volleyball uprights round 83 mm diameter,
* The special insertion elements are regularly supplied with tube For insertion into ground sockets
sockets of 60, 76 or 80 mm
Cat.-no. 51412
Cat.-no. 5132 Volleyball uprights round 83 mm diameter,
Volleyball uprights square 80 80 mm, For existing round ground sockets
For insertion into ground sockets Volleyball uprights with insertion elements
do not have labels of the DVV.
Cat.-no. 51312
Volleyball uprights square 80 80 mm,
For existing round ground sockets
Volleyball uprights with insertion elements
do not have labels of the DVV.

square and round EN 1271, with pulley tensioning device

Standard equipment: Matt silver anodised finish. Cat.-no. 51512


Also avaliable with yellow powder coating (see price list). Volleyball uprights square 80 80 mm,
* The special insertion elements are regularly supplied with For existing round ground sockets
tube sockets of 60, 76 or 80 mm
Cat.-no. 5162
Cat.-no. 5152 Volleyball uprights round 83 mm diameter,
Volleyball uprights square 80 80 mm, For insertion into ground sockets
For insertion into ground sockets
Cat.-no. 51612
Volleyball uprights round 83 mm diameter,
For existing round ground sockets
Volleyball

Volleyball uprights Standard


square and round, with pulley tensioning device

Cat.-no. 5102
Volleyball uprights square 80 80 mm, For insertion into ground sockets

Cat.-no. 51012
Central upright square 80 80 mm, For insertion into ground socket

Cat.-no. 5122
Volleyball uprights round 83 mm diameter, For insertion into ground sockets

Cat.-no. 51212
Central upright round 83 mm diameter, For insertion into ground socket

61

Protection cushions for volleyball uprights


and basketball units
For security: Protection cushions for volleyball uprights and also suitable for
basketball units. Made of polyethylene foam, foil at the outside resistant to tearing,
with adhesive tapes. Cushions length 2 m in orange.

Cat.-no. 5172
For square uprights 80 80 mm

Cat.-no. 5173
For round uprights 83 mm

Volleyball podium
This podium was specially constructed for volleyball and is taking into consideration all
requirements requested by the referees.
extremely strong, stable and stylish construction made of aluminium
easy adjustment of podium height by simply adjusting the platform three different
heights are possible
especially stable due to floor-protecting rubber feet and two collars linking the
podium firmly to the uprights
easy transportation by means of sensibly mounted wheels
low weight
incl. a writing board made of plastic
suitable for all uprights

Standard equipment: Natural bright aluminium finish, complete with writing board
and all necessary accessories.

Cat.-no. 5301
Volleyball

Beach volleyball competition unit


acc. to EN 1271 and DVV Beach 2, with pulley tensioning device

We developed the beach volleyball competition unit Beach 2 Cat.-no 51942


to meet the particularly high demands of the sport. Beach volleyball competition unit Beach 2, square 80 80 mm,
length of upright above ground 2650 mm, without ground
The uprights for this system are made of extremely stable sockets, yellow powder coated finish (see detail photo 2)
aluminium special profiles 80 80 mm and have the same
construction as the volleyball uprights in Cat.-no. 5132 Cat.-no. 5191
(page 60). Special ground sockets of galvanized steel, inclined execution,
to be fastened on concrete foundation, length of ground socket
The pulley tensioning device guarantees a quick tensioning and 360 mm insertion depth 350 mm with cover
release of the net and ensures a continuously adjustable net (see detail photo 3)
height.
Cat.-no. 5192
This system complies with TV and DVV. It has received the label Special ground sockets of galvanized steel to be set in concrete,
62
of DVV Beach 2. length of ground socket 700 mm insertion depth 350 mm, with
cover (see detail photo 4)
Cat.-no. 5193
Beach volleyball competition unit Beach 2, square 80 80 mm,
length of upright above ground 2650 mm, without ground
sockets, matt silver anodised finish (see detail photo 1)

[4]

[3]
[1] [2]
Volleyball

Beach volleyball competition unit


For insertion in ground sockets, with spindle tensioning device

63

[4]

[1] [2] [3]

For many years these volleyball uprights round, 83 mm diameter Cat.-no. 5181
of series Standard have been well known and in connection Special ground sockets made of galvanized steel, inclined execu-
with the special ground sockets they are a real alternative even tion to be fastened on concrete foundation, length of ground
considering the price to the simple uprights. socket 360 mm insertion depth 350 mm with cover
(see detail photo 3)
Cat.-no. 518
Length of upright above ground 2650 mm, without ground Cat.-no. 5182
sockets, matt silver anodised finish (see detail photo 1) Special ground socket made of galvanized steel, to be set in
concrete, length of ground socket 700 mm insertion depth
Cat.-no. 5184 350 mm with covers (see detail photo 4)
Length of upright above ground 2650 mm, without ground
sockets, yellow powder coated finish (see detail photo 2)

Beach volleyball competition unit


with pulley tensioning device

This uprights are the same as of Cat.-no. 518/5184.


The only difference is the tensioning device.

Cat.-no. 5183
Volleyball uprights round 83 mm diameter, anodised finish

Cat.-no. 51842
Volleyball uprights round 83 mm diameter, yellow powder
coated finish
Multi-functional uprights

Universal uprights
Uprights with special profiles of volleyball uprights 80 80 mm
resp. 83 mm diameter round, Cat- no. 510/512 (page 59)
which can be used for each kind of game. Length of upright
2650 mm above ground. Easy net height adjustment by sliding
units with handwheel.

Cat.-no. 521
Uprights square 80 80 mm
Incl. 2 sliding units with handwheel, ground sockets
insertion depth 350 mm with covers

Cat.-no. 522
Uprights round 83 mm diameter
Incl. 2 sliding units with handwheel, ground sockets
insertion depth 350 mm with covers

Cat.-no. 5211
Central uprights square 80 80 mm
Incl. 4 sliding units with handwheel, ground sockets
64 insertion depth 350 mm with covers

Cat.-no. 5221
Central uprights round 83 mm diameter
Incl. 4 sliding units with handwheel, ground sockets
insertion depth 350 mm with covers

Multi-functional uprights
A system of uprights of special profiles of volleyball uprights
square 80 80 mm of resp. 83 mm round, Cat.-no. 510/512
(page 59).
Simple net height adjustment. Due to the special construction of
the tensioning device (operation with crank) these uprights can
be used for volleyball, tennis matches and of course for soccer-
tennis for training and leisure time purposes.

Standard equipment: Matt silver anodised finish,


incl. ground sockets insertion depth 350 mm with covers
Basketball

Basketball unit
single-upright construction

Technical features: Rugged, functional single upright


construction made of 90 5 mm special aluminium alloy tubing.
Through a bracing additionally arranged on the tubes and a
reinforcd base to prevent bending of the upright, especially steady
and torsion resistant performance is assured.
To prevent unit distorsion, the ground sockets total length
600 mm, insertion depth 450 mm are provided with a cross-pin.
Appropriate slots are available at the upright end.
Special wedges prevent wavering of uprights in the ground
sockets. Additional cross beams from back board fixing to
upright acc. to CEN-Norm
stable rear structure as back board mounting made of thick-
walled aluminium profiles. Additional bracing of back board
mounting to upright
glass-fibre back board measuring 180 105 cm absolutely
weather-proof, scratch- and impact-resistant finish

Standard equipment: Natural bright aluminium finish.

Complete unit:
Cat.-no. 700 basket height 3050 mm
Total overhang 1650 mm
65
Cat.-no. 701 basket height 3050 mm
Total overhang 2250 mm
Incl. back board mounting glass-fibre back boards with basket
coloured orange, nets coloured white, all bracing, ground
sockets insertion depth 350 mm with cover and special
wedges

Unit without back boards, baskets, and nets:


Cat.-no. 7001
Total overhang 1650 mm

Cat.-no. 7011
Total overhang 2250 mm
Incl. back board mountings, all bracings, ground sockets inser-
tion depth 450 mm with cover and special wedges

Basketball back boards


of steel grating

Basketball back boards of steel grating, completely welded and


galvanized, for sizes of 180 105 cm and 120 90 cm.
For all basketball units with back boards of 180 105 cm,
Cat.-no. 700, 701 and 704 and for basketball units with back
boards of 120 90 cm, Cat.-no. 703 or as retrofit kit for existing
units. Due to the small impact area of the ball it is very silent and
therefore recommended for the use in residential areas. These
boards are safe from vandalism.

Cat.-no. 7071
Size 180 105 cm

Cat.-no. 7072
Size 120 90 cm
Basketball

Basketball practice unit


Technical features: Equipment specially developed for practice
purposes and chiefly used in school yards, playgrounds, and
open-air swimming pools. This equipment is also made of
espesially thick-walled special aluminium alloy 80 80 mm sqare
profiles and is therefore extremely stable and the basket height
meets competition requirements.
special wedges prevent equipment wavering in especially stable
ground sockets
the back boards are mounted on a solid aluminium rear
structure fitted directly to the upright
easy and quick assembly
glass-fibre back boards measuring 120 90 cm absolutely
weatherproof. Scratch- and impact-resistant finish

Standard equipment: Natural bright aluminium finish.

Complete unit:
Cat.-no. 703 basket height 3050 mm
Incl. back board mountings, glass-fibre back boards with baskets
coloured orange, net coloured white, ground sockets insertion
depth 500 mm with cover and special wedges

Unit without back boards, baskets, and nets:


66
Cat.-no. 7031
Incl. back board mountings, ground sockets insertion depth
500 mm with covers and special wedges

Street basketball unit


This is a real alternative to the basketball practice unit of Cat.-no.
703 even considering the price.
The new back boards, also made of glass-fibre, together with the
upright forming a knee give the unit an up-to-date design.
The upright is also made of special thick-walled aluminium square
profiles 80 80 mm. This construction, however, is forming a
knee and therefore has a total overhang of 650 mm.
The connection from basket to back board construction is execute
acc. to CEN-Norm. The basket height meets competition
requirements. Special wedges prevent the equipment wavering in
special stable ground sockets.
Easy and quick assembly. Glass fibre back boards of 100 75 cm,
absolutely weatherproof, scratch- and impact-resistant finish.

Standard equipment: Natural bright aluminium finish.


Incl. back board mountings, back boards of glass-fibre with
baskets coloured orange and nets coloured white, ground
sockets insertion depth 500 mm with covers and special
wedges

Cat.-no. 705 basket height 3050 mm

Cat.-no. 7051 basket height 2600 mm


Basketball

Basketball unit Mobile


Technical features: At last a steady all-aluminium Mobile unit Unit without back boards, baskets and nets:
which meets competition requirements. Absolutely maintenance- Cat.-no. 7041
free.Extremely stable construction due to special system profiles. Total overhang 1650 mm, incl. all necessary accessories, safety
Side frames and boom are supplied as complete welded hoops for counterweights, but without counterweights.
structures, whereby a special joint system assures simple
assembly. Plus enormous freight cost savings compared with
one-piece units. The connection from basket to back board
construction is execute acc. to CEN-Norm.

Complete Unit:
Cat.-no. 704
Total overhang 1650 mm, incl. all necessary accessories, glass-
fibre back boards with baskets coloured orange and nets
coloured white, safety hoops for counterweights, but without
counterweights.
Three rollers are fitted to each unit. The unit stands on two rear
support rollers and two front feet. The height of the front jockey
roller can be adjusted as required.
Counterweights are necessary, i. e. totally 8 weights
1 0.25 0.05 m with 25 kg each. An appropriate holder is
built in for this purpose. To prevent the counterweights from
being stolen, safety hoops are provided.
Glas-fibre back boards measuring 180 105 cm absolutely
67
weatherproof, scratch- and impact-resitant finish.

Standard equipment: Natural bright aluminium finish.

Basketball baskets

Basket acc. to FIBA standard, special strong Basket acc. to CEN standard, special strong Basket acc. to DIN standard, with chain
execution, with suspended folding mecha- execution, with 12-point suspension, net, strong execution,
nism. During Dunking the basket tips without net. galvanized, 8-point suspension.
down for 15 degrees at approx. 1050 N,
12-point suspension, without net.

Cat.-no. 7061 Cat.-no. 7062 Cat.-no. 7063


Athletics

Special ground sockets with cover which can be enamelled


for playgrounds with synthetic or artificial lawn surfaces

These special ground sockets with cover pocket were especially Cat.-no. 5011
developed for playgrounds with synthetic or artifical lawn for tennis uprights of Cat.-no. 500, volleyball uprights of Cat.-no.
surfaces. 513, 515, 510 5101 and 531, uprights of Cat.-no. 521, 5211 and
In the cover frame, which is fixed at the ground socket, a pocket 541, as well as for badminton uprights of Cat.-no. 520 and 550
is embedded. The cover is inserted in this pocket that there is no insertion depth 350 mm
risk of injury by covers lying around. Theft of the cover is
impossible as it is fixed to the cover frame by a chain. Cat.-no. 5021
The cover is formed like a trough and is let-in flush to the for tennis uprights of Cat.-no. 502, volleyball uprights of Cat.-no.
cover frame. The synthetic or artifical lawn coating is then 514, 516, 512, 5121 and 532, as well as for uprights of Cat.-no.
attached to this trough cover. 522, 5221, 542 and badminton uprights Cat.-no. 552 insertion
depth 350 mm
Standard equipment: As ground socket ready to be installed
(without synthetic or artificial lawn surface). Cat.-no. 7111
for basketball units of Cat.-no. 700, 7001, 701 and 7011
Cat.-no. 1111 insertion depth 450 mm
for soccer goals of Cat.-no. 98, 981, 99, 100, 1001, 101 and
102, junior soccer/small pitch goals of Cat.-no. 1301, 1302 and Cat.-no. 6111
1501 insertion depth 500 mm for rugby/soccer goals of Cat.-no. 600 and 6001
insertion depth 800 mm
Cat.-no. 1311
for junior soccer/small pitch goals of Cat.-no. 130 and 150,
basketball units of Cat.-no. 703, 7031, 705 and 7051
insertion depth 500 mm

Cat.-no. 2111
for handball goals of Cat.-no. 201, 202 and 206
68 insertion depth 300 mm

Built-in troughs
for long and triple-jump pits

At last a technically refined built-in trough system conferring Cat.-no. 610


the decisive advantages of aluminium: For 34 cm take-off board
guaranteed corrosion-free. Therefore absolutely
maintenance-free Cat.-no. 6101
For 20 cm take-off board
The structure is braced with wooden spacers additionally
prefitted by the manufacturer to exclude distortion during Cat.-no. 6102
installation, providing sufficient care is taken. For 30 cm take-off board

Secure retention of the built-in troughs is assured by ground


anchors provided at the side which are simply bent downwards.
Installation of these absolutely true-tosize built-in troughs
ensures that the take-off board can be easily removed and stored
for protection in the equipment room.

Standard equipment: Natural bright aluminium finish.


Incl. two wooden spacers
Water polo/Swimming

Water polo goals


Free floating, Type Super Goal, 3 0.90 m

Technical features: This kind of goal is a construction of a To guarantee a steady location in the water weights are provided
modern design. in the back part of the float construction.
The floats are made of stable aluminium parts and delivered in one
piece. The lateral floats comprise the special foam material for the Of course two-point line attachments are mounted at the floats
upwelling of the goals. acc. to international regulations.
Round corners in the back part of the float construction reduce The net is fixed at the crossbar/upright construction with the 69
the danger of being injured. Safety system net holders invisible below the floats.

The crossbar/upright construction is made of aluminium special Standard equipment: Floats of matt silver anodised finish,
profile 75 40 mm, white powder coated, net hoops of stable crossbar/upright construction white powder coated.
aluminium tubes of 40 mm diameter.
Cat.-no. 402
Mounting is very simple as due to the special construction only
crossbar/upright construction and net hoops have to be mounted Cat.-no. 403
to the floats. Suitable special nets, 4 mm, white

Transportation rollers
for water polo goals, Type Super-Goal

Cat.-no. 404
The rollers are laterally screwed below the floaters and remain
there permanently.
1 set comprises 8 rollers (for 1 pair of goals of the Cat.-no. 402).
Water polo/Swimming

Water polo goals


Free floating, folding, 3 0.90 m

The major improvement: Cat.-no. 400


With just a minimum of effort without expensive dismantling Incl. net hoops, counterweights and Safety system net holders
the floats with net hoops are simply clipped on to the crossbar/
upright structure. Cat.-no. 401
Suitable special nets, 4 mm, green, incl. tensioning cords
folding stable structure with rigid joints. All components are
able to operate independently of each other so that no
design-dependent fractures can occur
unsinkable due to foam-filled floats with slanted front
quick, extremely simple counter-balancing
carry out just once, and then forget about it
two-point line attachment to the special floats
steady location in water
free hanging net thus no undesirable hoops in the centre of
the goal
screw-in rust-resistant net hooks
powder coated
quick, easy assembly and disassembly
compact storage passes through the smallest doorway

Already at the 1980 Olympic Games in Moscow, these Haspo


water polo goals were used to the fullest satisfaction of organizers
and players alike.

Standard equipment: White powder coated crossbar/upright


structure.

70

Pool officials chair


Folding

The pool officials chair matched to the most stringent Standard equipment: Natural bright aluminium finish.
requirements there is no better. A proven construction which Incl. UV-resistant, perforated plastic moulded seat, writing board,
has thoroughly stood the test of time both at home and string bag, disc feet, and 2 clothes hooks.
abroad.
Cat.-no. 505
These facts speak for themselves, though a number of
technical features should be highlighted:
Extremely stable, steady and elegant design. Maintenance-free
assured by aluminium finish. Folding feature provided
through application of special hinges between seat and support.
Space-saving storage is thereby assured.
Ladder part with especially wide and non-slip steps. Matching
spars are also made of wide special profiles.
Stability assured by disc feet. Through bores in the disc feet,
additional anchoring of the chair by ground pegs is possible.
Fatigue-free and comfortable sitting posture by application
of a UV-resistant perforated moulded seat plastics of correct
anatomical design.
Wide writing board of weatherproof plastics.
Low freight costs, since the unit is packaged in two cartons.
Water polo/Swimming

Water polo goals


Pool edge fastening, folding, 3 0.90 m

Technical features: These water polo goals Pool edge Cat.-no. 411
fastening type have been designed in the same manner as the Suitable special nets, 4 mm, green, incl. tensioning cords
Free floating version but without the floats. This system thus
also features the same decisive advantages. Owing to different water depths, these goals may also, of course,
A special anchoring system enables the goals to be attached to be supplied in other sizes at additional cost.
any pool edge no matter what the design of channel.

Standard equipment: White powder coated crossbar/ vertical


adjustment
upright structures. When ordering, it is essential to state: horizontal
1. pool edge system and distance from top of the pool edge to adjustment

water level 71
2. distance of pool edge to centre of sockets
3. inside diameter of sockets
hinge

Cat.-no. 410 rubber


cushion
Incl. net hoops, pool edge fastening set for 42 mm inside diameter
sockets (without sockets) and Safety system net holders anchoring system

Ground socket
for water polo goals, type Pool edge fastening

Technical features: Made of thick-walled aluminium tubing, total


length 100 mm, with welded-on bottom plate and recessed cap

Standard equipment: Natural bright aluminium finish,


inside diameter 42 mm

Cat.-no. 412
Water polo/Swimming

Equipment trolley Maxi


The inserted trays can easily be adjusted by a special rail system.
Mounting is simple by use of a new frame profile of
80 40 mm.

Technical features: Wherever small items need frequent


transportation, this equipment trolley is indispensable and has
proven an ideal unit for swimming pools, schools, clubs and also
in sports halls.
All items are immediately and clearly to hand at the pool edge.
No more time wasted in searching and gathering together
floating boards, pull-buoys, diving rings, etc.
Space-saving arrangement of all equipment even the smallest
items no longer get lost.
Schools and clubs have their own trolley. It can be closed by a
usual lock (not included).
This equipment trolley is designed so that all the usual items can
be accommodated.

Dimensions:
Length: 1.50 m
Width: 0.62 m
Height: 1.48 m
This dimensions also allow storage in the smallest equipment
rooms.

Extremely stable and elegant design due to special system


profiles. Top and bottom, doors, side frames, rear wall, and all
inserted trays are supplied as a complete welded structure,
whereby a special joint system assures simple assembly.

The crimped aluminium grilles provided around the unit and for
72 the inserted trays ensure optimum water drainage and drying of
equipment. Trackless and smooth-running wheels matched to
swimming pool requirements allow rapid transport.

Standard equipment: Natural bright aluminium finish.

Cat.-no. 430

Equipment cabinet Maxi


This equipment cabinet has been designed in the same manner as
the equipment trolley of Cat.-no. 430.
This cabinet also confers the same decisive advantages of material
and design.
Fitted with feet instead of wheels.

Standard equipment: Natural bright aluminium finish.

Cat.-no. 431
Water polo/Swimming

Equipment trolley Mini


It is a advancement being of the same construction as the trolley
shown on page 72, however, smaller and with 2 inserted trays
which are easily adjustable by a special rail system.

Dimensions:
Length: 1.25 m
Width: 0.62 m
Height: 1.25 m

Standard equipment: Natural bright aluminium finish.

Cat.-no. 429

Storage trolley for swimming


lane lines Type 1
with reel lock

Now equipped with a reel lock so that the swimming lanes


cannot unwind by themselves.

Delivery of two dimensions so that it can be used for all reel


types.

Technical features: In addition to its dismantability, this reel is


distinguished by absolute freedom from maintenance and
ensures minimum wear of expensive lane lines.
Easy unrolling of the lines is ensured even when fully loaded.
Trackless and smooth-running wheels matched to pool require- 73
ments, 2 of them steerable and provided with brakes, assure
rapid transport.

Standard equipment: Natural bright aluminium finish, incl. all


individual components, but without lane lines.

Maxi:
Dimensions: Length: 2.45 m, Width: 1.18 m, Height: 1.50 m,
diameter of reels 1.15 m,
space for 6 special lane lines 150 mm diameter of 25 m each,
12 special lane lines 100 mm diameter of 25 m each or about
24 lane lines of 25 m each with floats

Cat.-no. 4201

Mini:
Dimensions: Length: 1.78 m, Width: 1.18 m, Height 1.37 m,
diameter of reels 1.15 m,
space for 3 special lane lines 150 mm diameter of 25 m each,
6 special lane lines 100 mm diameter of 25 m each or about
12 lane lines of 25 m each with floats

Cat.-no. 420
Water polo/Swimming

Storage trolley for swimming


lane lines Type 2
with reel lock

Now equipped with a reel lock so that the swimming lanes


cannot unwind by themselves.

Technical features: Due to the positive experiences with the


original Haspo storage trolley for swimming lane lines of Cat.-no.
420 (page 73) we developed this type. Two different sizes can be
delivered.
Also this trolley needs no maintenance. Trackless and smooth-
running wheels assure an easy transport from one place to the
other.
Easy unrolling of the lane lines is ensured even if fully loaded.
The trolley is dismantled and can be easily and quickly mounted.

Standard equipment: Natural bright aluminium finish, incl. all


individual components, but without lane lines

Maxi:
Dimensions: Length: 1.40 m, Width: 1.40 m, Height: 1.35 m,
diameter of reels 1.15 m
space for 2 special lane lines 150 mm diameter of 25 m each,
4 special lane lines 100 mm diameter of 25 m each or about
8 lane lines of 25 m each with floats.

Cat.-no. 432

Mini:
Dimensions: Length: 0.80 m, Width: 1.40 m, Height: 1.35 m,
diameter of reels 1.15 m,
space for 1 special lane line diameter 150 mm of 25 m,
74 2 special lane lines diameter 100 mm of 25 m each or about
4 lane lines of 25 m each with floats.

Cat.-no. 4321

Reel trolley
Dismantable

Technical features: This proved reel trolley and reel are disman-
table. Thus we achieved a small transporting volume and conse-
quently freight cost savings. Completely made of stable aluminium
profiles. Reels can be put down without damaging the lane lines.

Standard equipment: Natural bright aluminium finish.

Dimensions:
approx. Length: 0.80 m, Width: 1.30 m, Height: 1.17 m, reel
diameter approx. 0.98 m, space for 2 lane lines with a length of
25 m each of the usual lane lines with floats.

Cat.-no. 423 Trolley (without reel)

Cat.-no. 424 Reel


Ball trolley

Ball trolley Easy Take Out

This ball trolley, which is delivered completely welded and thus


requires no assembly, is a new type of product made from stable
aluminium profiles.

The balls are stored on three shelves and can be easily removed
when the door is opened. A slight slope in the shelves causes the
balls to roll gently toward the opening. By closing the door with
a usual lock (not included in delivery), the balls are secured
against unauthorised removal.

This ball trolley offers space for e.g., 15 soccer balls or water
polo balls.

Delivery is in a stable wooden crate to prevent damage during


transport.

Dimensions: Length: 1210 mm, Width: 330 mm,


Height: 930 mm

Standard equipment: Surface natural bright aluminium,


completely welded in one piece, mounted transportation wheels,
can thus be used immediately

Cat.-no. 1953

Ball trolley
with lockable pump compartment

At last an all-aluminium ball trolley with the well-known decisive


material advantages. The special advantage of the Haspo ball
trolley is that a special welded-in compartment with subdivisions 75
is used to house a ball pump and various necessary adapters in
the immediate vicinity of the balls. Thus no more time lost
through searching and gathering together. The lid can be closed
by a usual lock, so that also the pump compartment is safe.

Technical features:
Top and bottom parts with built-in lattice bars top with lid
and pump compartment are supplied as complete welded
construction. The lid is sized so that folding over beyond the
trolley is not possible. Injuries are thus avoided. Trackless and
easy-running castors assure rapid transport even when the
trolley is full.

Dimensions: Length: 900 mm, Width: 700 mm,


Height: 700 mm,
Capacity: up to 80 balls depending on ball type

Standard equipment: Natural bright aluminium finish.


Incl. theft-proof pump compartment.

Cat.-no. 195
Rugby/Football

Rugby goals/American football goals

Technical features: Made of the extremely stable and tho-


roughly proven soccer goal sections. The crossbar is attached to
the uprights with aluminium fastening elements. Easy assembly
and disassembly with screw fastenings no welds. One hundred
percent steady goal location in 800 mm ground sockets through
application of special wedges no wavering of goals.

Standard equipment: Matt silver anodised finish.

Cat.-no. 600 Cat.-no. 6001


Rugby Goals, incl. aluminium fastening elements, ground American football goals, incl. aluminium fastening elements,
sockets insertion depth 800 mm with covers, and special ground sockets insertion depth 800 mm with covers, and
wedges special wedges
The goal uprights for Rugby goals, can upon request be elon-
gated up to 11 m.

76
Badminton

Badminton uprights
with internal tension mechanism

These badminton uprights with internal tension mechanism are


available of square profile 80 80 mm or round profile with
83 mm diameter.
The tensioning upright is equipped with the same tension
mechanism as of the tennis uprights of Cat.-no. 500/502 so that
the mechanism is protected against external influences.
Easy and quick tensioning and loosening of net tension by use of
a special spindle.
Net and rope are durable as no roll up of the net rope.
The crank is inserted in the head of the upright and therefore
always ready to hand.
Aluminium coating mould parts as covers.

Standard equipment: Matt silver anodised finish.


Incl. rustproof fixing hooks and sable ground sockets
insertion depth 350 mm with covers

Cat.-no. 550
square, 80 80 mm

Cat.-no. 552
round, 83 mm diameter

Badminton uprights Standard


Technical features: An alternative solution to the freestanding
badminton upright which has already gained recognition, since
floor sockets for tennis and volleyball are provided at most indoor
courts.

Standard equipment: Matt silver anodised finish.


Incl. rust-resistant net and tensioning hooks and ground sockets
insertion depth 350 mm with covers

Cat.-no. 520

77
Information cabinets

Information cabinets
The successful information cabinets from Haspo with the decisive
advantages, naturally made of aluminium.
Indoor and outdoor constructions, for use at walls and on
uprights as well as for combination units without additional
uprights in the middle.

This programme can be delivered as follows:


oblong format, opening through 180 downwards.
oblong format, opening upwards. After having opened the
flap, gas pressure springs will further open the flap automati-
cally. Therefore it cannot fall down when information docu-
ments are fit.
upright format with lateral opening.

The execution with opening through 180 downwards is a real


bargain but cannot be used if, for example there are walls or
hedges below the cabinet.

[1]
There are decisive advantages:
Due to a special manufacturing procedure frame and flap Oblong format, opening through 180 downwards
parts are equipped with especially strong angle connections.
Therefore important improvement of stability and better
optical impression since no screws or rivets are visible from
outside.
Cabinets with flap opening upwards are supplied in series with
gas pressure springs.
All structural components such as frame, flap and hinges are
made of aluminium for indestructibility, permanent durability,
and complete freedom of maintenance. You never have to
paint them.
Uprights for freestanding installation also only of aluminium.
This is a very special construction which enables infinitely
height adjustment of the cabinet due to continuous mounting
shafts incorporated into the special-system profile, even if the
cabinets are mounted.
The elegant design allows both outdoor and indoor.
Special sizes upon request as well as an abundant range of
accessories meet all planning and layout requirements.
[2]
Oblong format, opening upwards, supplied with gas pressure springs

78

[3]
Upright format, lateral opening to the right
Information cabinets

Information cabinets
Technical features:
Functional, elegant construction, made of torsion resistant special system
sections of Al Mg Si 0.5, F 25 alloy
Frame depth 70 mm
Magnetic rear wall of foil-covered steel coloured dark green RAL 6020, the back is
galvanized and additionally top-coated
The information material is arranged quickly and simply by strong magnets
without damage
A seal between frame and rear wall guarantees an optimal protection against
weather influences
The viewing window consists of 4 mm thick shatter-proof acrylic glass held in the
frame by rubber seals
Indentical chrome-plated cylinder locks offer protection against unauthorized access.
Rubber seals between frame and flap guarantee absolute protection against spray
and dust
Sufficient air circulation is provided by a built-in ventilation system
An interchangeable polystyrene lettering or advertising strip, 100 mm wide
(Cat.-no. 900, 9001 and 9002 with 75 mm), may be simply attached in the flap (back
side of window)

[4]
Standard equipment: In standard sizes as presented on page 80 or in special sizes at
additional costs. Matt silver anodised finish (E 6/EV 1) or dark bronze anodised finish at Information cabinets of anodised finish E6/EV1 with
additional costs. Incl. attachment magnets and fastening material for wall mounting. uprights of Cat.-no. 905

Combination units

Combination units as hitherto installed with many


disturbing uprights. Haspo makes the difference visible.

Combination units have, up to now, been aluminium special system sections This system enables you to arrange your
arranged so that uprights are not only 80 80 mm, 2500 mm long. The cross cabinets next to each other and the
located at the outer cabinets but also members are similar with cross sections more you have in one combination unit,
between the cabinets. Thus, for example, a of 80 40 mm. Mounting devices have the more economical it is:
combination unit comprising three cabinets been integrated in these special system
still needed four uprights. sections so that they are invisible when Cat.-no. 900/9001 = 28 cabinets 79
However, this arrangement has the great the cabinets are in position. Cat.-no. 901/9011 = 25 cabinets
disadvantage that too many uprights look Cat.-no. 902/9021 = 23 cabinets
clumsy and unattractive. With this new This system combination units are Cat.-no. 903/9031 = 23 cabinets
Haspo system, the in-between uprights outstanding value thanks to the Cat.-no. 9002 = 2 10 cabinets
have disappeared. The cabinets are employment of high-grade materials, Cat.-no. 9012 = 26 cabinets
enclosed in a frame formed by the outside sound workmanship and striking good
uprights and an upper and a lower cross looks.
member. Not only does it look good, it is
also exremely stable. The uprights are of
Information cabinets

Information cabinets

Cat.-no. Outer dimensions Viewing area No. No. No. No.


in mm without lettering of of of of
WHD strips in mm posters locks keys magnets

Oblong format, opening through 180 downwards (photo 1)

900 695 532 70 535 372 2 A4 5 A6 1 2 10

901 1.007 857 70 847 697 8 A4 4 A6 2 4 20

902 1.357 1.031 70 1.197 871 18 A4 2 4 30

903 1.600 1.024 70 1.440 864 21 A4 2 4 30

Oblong format, opening upwards (photo 2) supplied with gas pressure springs

9001 695 532 70 535 372 2 A4 5 A6 1 2 10

9011 1.007 857 70 847 697 8 A4 4 A6 2 4 20

9021 1.357 1.031 70 1.197 871 18 A4 2 4 30

9031 1.600 1.024 70 1.440 864 21 A4 2 4 30

Upright format, lateral opening to the right (photo 3)

9002 532 695 70 372 535 2 A4 Q 2 A6 1 2 10

9012 857 1.007 70 697 847 6 A4 2 A4 Q 2 4 20

Additional costs for special sizes upon request.

Upright sets (photo 4):

Cat.-no. 905
Upright set (two uprights) for freestanding installation, to be set in concrete, made of aluminium special
profiles 80 40 mm, length 2500 mm, incl. fixing material and covers

Cat.-no. 915
Upright set (two uprights) for wall fixing made of aluminium special profiles 80 40 mm,
length 1250 mm, with welded feet 120 120 8 mm, bored (without photo)

Cat.-no. 925
Upright set (two uprights) for freestanding installation, to be set in concrete, for the assembly of 2 cabinets,
back mounting, made of aluminium special profiles 80 80 mm, length 2500 mm, incl. fixing material and
covers (without photo)

80
Information cabinets

Combination units

Cat.-no. Cat.-no./No. Cat.-no. Cat.-no./No.


of of
cabinets cabinets

9501 900/9001 2 9523 902/9021 2

9502 900/9001 3 9524 902/9021 3

9503 900/9001 4 9527 903/9031 2

9504 900/9001 5 9528 903/9031 3

9505 900/9001 6 9549 9012 2

9506 900/9001 7 9550 9012 3

9507 900/9001 8 9551 9012 4

9515 901/9011 2 9552 9012 5

9516 901/9011 3 9553 9012 6

9517 901/9011 4
Combination units for the Cat.-no. 9002 upon request
9518 901/9011 5

Accessories
Lettering strips: Lighting fitting incl. fluorescent strip
light and mounting materials:
Cat.-no. 907
Polystyrene lettering strip white, Cat.-no. 9061
100 mm high (Cat.-no. 900, 9001 and For Cat.-no. 900/901/9001/9011/9002/9012,
9002 only 75 mm), unlettered, for all 18 Watt strip light
cabinet sizes
Cat.-no. 9062
Cat.-no. 9075 For Cat.-no. 902/903/9021/9031,
Lettering strip as above, but with text to 30 Watt strip light
specification up to 15 characters
Cat.-no. 908
Cat.-no. 9076 Additional magnets pack of 10
Additional characters (in case of lettering
strip of Cat.-no. 9075)

On request we can deliver at additional costs:


Information cabinets and upright sets in coloured anodised finish or with powder coating. Colours acc. to RAL colour scale.
81
Spares

Spares
In case of spare parts orders please note
the indicated description or make use of
our technical advice.

Cast corner joint for goals of oval profile


(connection crossbar/uprights)

Connection element crossbar/uprights for goals of oval profile Welded corner joint construction for goals of Cat.-no. 109, 110
with welded mitre (connection upright/ground spar)

82

Cast corner joint for goals of square profile Wide and small connecting angles for goals of Cat.-no. 120,
(connection crossbar/uprights) 121, 140, 141 (connection upright/ground spar)
News

News
Soccer goals (See detail photo 1) Safety additional weights Mobile (See detail photo 7)
(detailed description see page 8) (detailed description see page 33)

Cat.-no. 984, Cat.-no. 9845, Cat.-no. 1390


Cat.-no. 9814, Cat.-no. 98145
Players cabin United (See detail photo 8)
Soccer goals (See detail photo 2) (detailed description see page 38)
(detailed description see page 20)
Cat.-no. 1813, Cat.-no. 1814, Cat.-no. 1815,
Cat.-no. 114 Cat.-no. 18131, Cat.-no. 18141, Cat.-no. 18151

Junior soccer goals (See detail photo 3) Handball goals blue/silver (See detail photo 9)
(detailed description see page 20) (detailed description see page 51)

Cat.-no. 115 Beach volleyball competition unit (See detail photos 1013)
(detailed description see page 62)
Ground anchors (See detail photo 4)
(detailed description see page 24) Cat.-no. 5193, Cat.-no. 51942,
Cat.-no. 5191, Cat.-no. 5192
Cat.-no. 211
Ball trolley Easy Take Out (See detail photo 14)
Safety additional weights (See detail photos 56) (detailed description see page 75)
(detailed description see page 28)
Cat.-no. 1953
Cat.-no. 1340, Cat.-no. 1350

[1] [2] [3] [4]

[5] [6] [7] [8]

[9] [10] [11] [12, 13] [14]

83
Haspo Sportgerte
GmbH & Co. KG
Johannisweg 23/25
38723 Seesen-Rhden

Phone +49 (0) 53 84-96 97 50 und -4 91


Fax +49 (0) 53 84-96 97 567 und -4 93

info@haspo.de
www.haspo.de

Technical information
Materials Freestanding goals
Most of the products listed in this catalogue are extensively For freely accessible areas e. g. playgrounds only goals For
constructed of extruded aluminium sections of the alloy AI Mg Si insertion in ground sockets are recommended.
0.5, F 22 25, anodised grade in accordance with DIN
1748/17615. Assembly instructions
These are included with the equipment in German, English and
Surface treatments French. Very important for exports.

Anodising All equipment complies with the international regulations in terms


The electric oxidising of aluminium is a process which produces a of dimensions and design and is supplied with all the necessary
high-strength oxide layer = predective layer on aluminium. The accessories, but without nets unless these are explicitly specified
hardness and wearablility of this oxide layer combined with the under the standard equipment.
possiblities offered by modern anodising technology are your
guaranty that, given proper care, the treated parts will have an Apart from our standard equipment, we can also manufacture
attractive appearance for many years. special dimensions and designs on request.

Powder Coating We are continuously engaged in the further development of our


For the coating a polyester powder is used which is burnt in for equipment and therefore reserve the right to make technical
30 Minutes with a temperature of 180 to 200 after a careful alterations without prior notice.
chemichal and chromating treatment of the aluminium. Without
this treatment there are considerable risks with respect to the
adherence of the enamel. This coating is done acc. to the
regulations of the Gtergemeinschaft fr Stckgutbeschich-
tung. The process cannot be compared with a simple enamelling
which is usually offered with the well-known disadvantages as for
example flaking of the enamel and the colour.

Anda mungkin juga menyukai