Appendix S &
Ambient temp. range -5 deg C to 35 deg C Minimum gas temperature 4.3 -5 to 35 deg C Minimum gas temperature
3.3
Extreme temperatures App. S & 3.3 -15 deg C to 40 deg C Maximum storage temperature 4.3 -2 to 60 deg C
Total mean pr. Loss 9.2 & App. Q 2 to 4 mbar. Pressure absorption 5.2 2 to 4 mbar Pressure absorption
Page 1 of 24
Comparison between BS: 4161 Part 5 - 1990 and EN: 1359 - 1998 IS 14439 (Part 1): 1997 (Part 2): 1998 for Domestic Gas Meters
MGL Tech spec BS 4161: Part 5: 1990 EN 1359: 1998 IS 14439 (Part 1): 1997 &
Clause
Test type Test Features/parameters Test type Clause No. Test Features/parameters Test type Clause No. Test Features/parameters Test type
No.
Feet 5.4 Min. ht of feet shall be 5 mm. Insulating feet 6.5.2 Minimum height of 5 mm.
Supply air to meter at pr. of 50 mbar. Furnace temp. 650 deg C, Test period:
Fire Temp.of furnace is incr. by 821 deg C Resistance to high ambient 30 min. Temp. of furnace shd. be
6 As per BS 4161 or eqvt Fire resistance App. T 6.5.5
resistance in 30 mins. and leakage rate is temp. raised as per curve defined in ISO
monitored & recorded. 834: 1975.
Type Tests 10 Mechanical performance 7 Mechanical performance
Page 2 of 24
Comparison between BS: 4161 Part 5 - 1990 and EN: 1359 - 1998 IS 14439 (Part 1): 1997 (Part 2): 1998 for Domestic Gas Meters
MGL Tech spec BS 4161: Part 5: 1990 EN 1359: 1998 IS 14439 (Part 1): 1997 &
Clause
Test type Test Features/parameters Test type Clause No. Test Features/parameters Test type Clause No. Test Features/parameters Test type
No.
Page 3 of 24
Comparison between BS: 4161 Part 5 - 1990 and EN: 1359 - 1998 IS 14439 (Part 1): 1997 (Part 2): 1998 for Domestic Gas Meters
MGL Tech spec BS 4161: Part 5: 1990 EN 1359: 1998 IS 14439 (Part 1): 1997 &
Clause
Test type Test Features/parameters Test type Clause No. Test Features/parameters Test type Clause No. Test Features/parameters Test type
No.
Devices to prevent the Flow of more than 50 cyclic volumes Devices to prevent the
6.5.4.1
registration of reverse flow when subjected to reverse flow. registration of reverse flow
Devices to prevent reverse Reverse flow of more than 2.5% shall Devices to prevent reverse
6.5.4.2
flow not pass. flow
Subsequent verifications
Center to
center 2 110 mm
distance
Pressure test
3 As per BS 4161 or eqvt
point
Meter index 4 In cubic metre as per BS 4161 or eqvt
Shd have MGL's name and should be as
Marking 5
per BS 4161 or eqvt
Colour 7 Neutral, to be approved by MGL
Individually boxed, and packed to prevent
Packing 8
movement during transit
Page 4 of 24
Comparison between BS: 4161 Part 5 - 1990 and EN: 1359 - 1998 IS 14439 (Part 1): 1997 (Part 2): 1998 for Domestic Gas Meters
MGL Tech spec BS 4161: Part 5: 1990 EN 1359: 1998 IS 14439 (Part 1): 1997 &
Clause
Test type Test Features/parameters Test type Clause No. Test Features/parameters Test type Clause No. Test Features/parameters Test type
No.
Page 5 of 24
Comparison between BS: 4161 Part 5 - 1990 and EN: 1359 - 1998 IS 14439 (Part 1): 1997 (Part 2): 1998 for Domestic Gas Meters
IS 14439 (Part 1): 1997 & (Part 2): 1998
Clause No. Test Features/parameters
Page 6 of 24
Comparison between BS: 4161 Part 5 - 1990 and EN: 1359 - 1998 IS 14439 (Part 1): 1997 (Part 2): 1998 for Domestic Gas Meters
IS 14439 (Part 1): 1997 & (Part 2): 1998
Clause No. Test Features/parameters
Page 7 of 24
Comparison between BS: 4161 Part 5 - 1990 and EN: 1359 - 1998 IS 14439 (Part 1): 1997 (Part 2): 1998 for Domestic Gas Meters
IS 14439 (Part 1): 1997 & (Part 2): 1998
Clause No. Test Features/parameters
Page 8 of 24
Comparison between BS: 4161 Part 5 - 1990 and EN: 1359 - 1998 IS 14439 (Part 1): 1997 (Part 2): 1998 for Domestic Gas Meters
IS 14439 (Part 1): 1997 & (Part 2): 1998
Clause No. Test Features/parameters
Page 9 of 24
Comparison between BS: 4161 Part 5 - 1990 and EN: 1359 - 1998 IS 14439 (Part 1): 1997 (Part 2): 1998 for Domestic Gas Meters
IS 14439 (Part 1): 1997 & (Part 2): 1998
Clause No. Test Features/parameters
Page 10 of 24
EN 1359: 1998
Test type Clause No.
Minimum gas temperature 4.3
Maximum storage temperature 4.3
Errors of indication 5.1
Pressure absorption 5.2
External leak tightness 6.2.2
Torque value
Bending Moment
Resistance to vibrations 6.2.6
For maximum flow rate of 1-10 cu.m/h, ht. of dropping the meter is
0.5 m; for 16-65 cu.m/h, it is 0.3 m; for 100 & 160, it is 0.2 m.
Any blistering of the coating shall be less thanthat given as the ratio
density 2/size 2 in ISO 4628-2:1982, and the deg. of corrosion shall
not be greater than that given as Ri 1 in Table 1 of ISO 4628-3:1982.
5 periods each of 8 hrs duration using a sun lamp that has been in use
for 50-400 hrs.
As per EN 60730-1:1995.
BS 4161: Part 5: 1990
Test type Clause No.
Appendix S &
Ambient temp. range
3.3
Extreme temperatures App. S & 3.3
Errors of indication 5.1
Salt spray test App. E 2.4
Test of scratch resistance App. B.2
App. B-3 &
Penetration Criteria
4.2(a)
Test for resistance to humidity App. C.
Tests on diaphragm. 4.4.3.3
a) Liq. phase immersion test
b) Water test
c) Low temp. flexibility 4.4.3.3.3 & App.
(Torsion test of stiffness) F.
d) Porosity test App. G.
c) Impact
d) Flammability
Meter Connection 7
Feet 5.4
Transit shocks 5.14
Strength of connections
Fire resistance
BS 4161: Part 5: 1990
Test Features/parameters
-5 deg C to 35 deg C
-15 deg C to 40 deg C
+/-3% for flow rate of 0.1 Qmax and +/-1.5% for flow rate bet. 0.1
Qmax and Qmax.
As per BS 3900: Part F 4
No penetration of surface for movement of test apparatus over surface at
30-40 mm/s with a spring force of 9.8 / 29.4 N.
Visually / Microscopic examination / salt spray test.
100% humidity, 42-48 deg C, Test Period - 4 days. No evidence of
lifting,blistering or deterioration.
Test Period - 264 hrs. Rel. Hummidity - 85%. Gas flow rate shd. not be
less than 30 cu. dm/h (1 cu.ft/h).
400 hr on air at 0.5 Qmax at -5 deg C followed by 400 hr on air at 0.5
Qmax at 35 deg C.
5 periods of 8 hrs duration that has been in use for 50-400 hr.
Immersion at 20 deg C in Sodium Carbonate for 2 hr and paint thinners
for 1 hr.
As per BS 6505
1000 hr test at 20 deg C. Put 50 ml of toulene / heptance (1:1 by vol.)
into each of the connections. Then do a 168 hr test at 20 deg C using air
at 0.25 Qmax.
100 days test (alternate bet. NG & air every 7days) or other cyclic
movement eqv. to that experienced at 1.5 times meter badged rating. Test
int. glands at 5 mbar. Test ext. glands at 5 mbar & max working pr.
Turning resistance less than 0.015 N.
BS 746 or BS 4504. Face of connections shall be within 2 deg of the hor.
plane of the meter.
Min. ht of feet shall be 5mm.
Swept freq. between 10 Hz & 100 Hz (+/- 5%) at a sweep rate of 10
octave/min for 4 hrs in all planes.
For meter with working pr. less than 75 mbar, no leakage till int. pr. of
115 mbar. For meters with working pr. bet 75 mbar & 7 bar, hydrostatic
test at 5 times the max. working pr. for 30 min without significant
yeilding, pneumatic test at 1.1 times the max working pr. for 10 min.
Rate of change of pr. shall be less than 350 mbar/s.
+/- 2% at any rate of flow between the badged rating and any rate of
flow not less than 1/50 th of the badged rating.
2 mbar to 4 mbar.
0.6 to 1 mbar
Pass air at a flow rate equal to badged rating for 30 min. & then at flow
rate of 115% of its badged rating for 135 days at 20 deg C.
The gas meters made by Hangzhou Beta Gas meter Co., Ltd.,
which are printed with polyester powder plastics coating, have
more stronger ability to against the heavy humidity and rainfall.
There is a gas flow direction mark on top case of the meter and
also a prevent-reverse hook inside of the meter against the
illegal dismantle and stealing and reverse installation.
-200C to +400C
G1.6 H225xW195xD170 mm
G1.6 2.0 kg
We can supply the meter with fire resistance according to
BS4161 part 5
OK, we can print the Custom name on the index, but you should
provide your marks for our design the new nameplate.
In our export packing, we often use one individual box for each
meter and six boxes in one master carton, and 42 cartons on one
pallet with nylon plastic wrapped, to avoid the impact and
raining.
Valid ISO 9001 issued by TUV management Service GmbH
(Germany)