doc @ 64941 @ @ 1
Manual
WAGO-PERSPECTO 762
CP 57 QVGA TV
762-3057/000-001
PERSPECTO CP, Control Panel with CoDeSys
Target Visualisation
Version 1.1.0
Pos: 3 /Alle Serien (Allgemeine Module)/Hinweise zur Dokumentation/Impressum fr Standardhandbcher - allg. Angaben, Anschriften, Telefonnummern und E-Mail-Adressen @ 3\mod_1219151118203_21.doc @ 21060 @ @ 1
2 WAGO-PERSPECTO 762
762-3057/000-001 CP 57 QVGA TV
Hansastrae 27
D-32423 Minden
E-Mail: info@wago.com
Web: http://www.wago.com
Technical Support
E-Mail: support@wago.com
Every conceivable measure has been taken to ensure the accuracy and
completeness of this documentation. However, as errors can never be fully
excluded, we always appreciate any information or suggestions for improving the
documentation.
E-Mail: documentation@wago.com
We wish to point out that the software and hardware terms as well as the
trademarks of companies used and/or mentioned in the present manual are
generally protected by trademark or patent.
=== Ende der Liste fr Textmarke Einband_vorne ===
Manual
Version 1.1.0
WAGO-PERSPECTO 762 Table of Contents 3
762-3057/000-001 CP 57 QVGA TV
Pos: 5 /Dokumentation allgemein/Verzeichnisse/Inhaltsverzeichnis - ohne Gliederung - und Verzeichnis @ 3\mod_1219151230875_21.doc @ 21063 @ @ 1
Table of Contents
1 Notes about this Documentation................................................................. 5
1.1 Scope of Validity....................................................................................... 5
1.2 Copyright................................................................................................... 5
1.3 Symbols..................................................................................................... 6
1.4 Number Notation....................................................................................... 8
1.5 Font Conventions ...................................................................................... 8
2 Important Notes ........................................................................................... 9
2.1 Legal Bases ............................................................................................... 9
2.1.1 Subject to Changes ............................................................................... 9
2.1.2 Personnel Qualification ........................................................................ 9
2.1.3 Use of the 762 Series in Compliance with Underlying Provisions .... 10
2.1.4 Technical Condition of Specified Devices ......................................... 10
2.2 Safety Advice (Precautions).................................................................... 11
3 Device Description ..................................................................................... 13
3.1 Control Panel with Target Visualization PERSPECTO CP TV ............. 13
3.2 View ........................................................................................................ 14
3.2.1 Front View.......................................................................................... 14
3.2.2 Back view ........................................................................................... 15
3.3 Connectors............................................................................................... 16
3.3.1 X1 Supply Voltage .......................................................................... 16
3.3.2 X2 Serial Interfaces RS-232 (COM 3) and RS-485/RS-422 (COM 2)17
3.3.3 X3 Serial Interface RS-232 (COM 1).............................................. 18
3.3.4 X5 CAN 0 Interface......................................................................... 19
3.3.5 X6 Ethernet Interface ...................................................................... 20
3.3.6 X8/X9 USB Interfaces..................................................................... 21
3.4 Battery Case ............................................................................................ 22
3.5 Slot for Memory Card ............................................................................. 23
3.6 Operating Elements ................................................................................. 24
3.6.1 Service Button .................................................................................... 24
3.7 Technical Data ........................................................................................ 25
3.7.1 Housing............................................................................................... 25
3.7.2 Power Supply...................................................................................... 25
3.7.3 Display................................................................................................ 25
3.7.4 Hardware ............................................................................................ 26
3.7.5 Software.............................................................................................. 26
3.7.6 Interfaces ............................................................................................ 26
3.8 Approvals ................................................................................................ 27
3.9 Standards and Guidelines........................................................................ 27
4 Mounting..................................................................................................... 28
4.1 Front Panel Installation ........................................................................... 28
5 Connect Devices ......................................................................................... 30
6 Commissioning ........................................................................................... 31
6.1 Switch on................................................................................................. 31
6.2 IP address of the device........................................................................... 32
Manual
Version 1.1.0
4 Table of Contents WAGO-PERSPECTO 762
762-3057/000-001 CP 57 QVGA TV
Manual
Version 1.1.0
WAGO-PERSPECTO 762 Notes about this Documentation 5
762-3057/000-001 CP 57 QVGA TV
Pos: 7 /Alle Serien (Allgemeine Module)/berschriften fr alle Serien/Hinweis zur Dokumentation/Hinweise zur Dokumentation - berschrift 1 @ 4\mod_1237987661750_21.doc @ 29029 @ 1 @ 1
1.2 Copyright
This Manual, including all figures and illustrations, is copyright-protected. Any
further use of this Manual by third parties that violate pertinent copyright
provisions is prohibited. Reproduction, translation, electronic and phototechnical
filing/archiving (e.g., photocopying) as well as any amendments require the
written consent of WAGO Kontakttechnik GmbH & Co. KG, Minden, Germany.
Non-observance will involve the right to assert damage claims.
Pos: 11.2 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
Manual
Version 1.1.0
6 Notes about this Documentation WAGO-PERSPECTO 762
762-3057/000-001 CP 57 QVGA TV
Pos: 11.3 /Alle Serien (Allgemeine Module)/berschriften fr alle Serien/Hinweis zur Dokumentation/Symbole - berschrift 2 @ 13\mod_1351068042408_21.doc @ 105270 @ 2 @ 1
1.3 Symbols
Pos: 11.4.1 /Alle Serien (Allgemeine Module)/Wichtige Erluterungen/Sicherheits- und sonstige Hinweise/Gefahr/Gefahr: _Warnung vor Personenschden allgemein_ - Erluterung @ 13\mod_1343309450020_21.doc @ 101029 @ @ 1
Personal Injury!
Indicates a high-risk, imminently hazardous situation which, if not avoided, will
result in death or serious injury.
Pos: 11.4.2 /Alle Serien (Allgemeine Module)/Wichtige Erluterungen/Sicherheits- und sonstige Hinweise/Gefahr/Gefahr: _Warnung vor Personenschden durch elektrischen Strom_ - Erluterung @ 13\mod_1343309694914_21.doc @ 101030 @ @ 1
Personal Injury!
Indicates a moderate-risk, potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Pos: 11.4.4 /Alle Serien (Allgemeine Module)/Wichtige Erluterungen/Sicherheits- und sonstige Hinweise/Vorsicht/Vorsicht: _Warnung vor Personenschden allgemein_ - Erluterung @ 13\mod_1343310028762_21.doc @ 101038 @ @ 1
Personal Injury!
Indicates a low-risk, potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
Pos: 11.4.5 /Alle Serien (Allgemeine Module)/Wichtige Erluterungen/Sicherheits- und sonstige Hinweise/Achtung/Achtung: _Warnung vor Sachschden allgemein_ - Erluterung @ 13\mod_1343310134623_21.doc @ 101041 @ @ 1
Damage to Property!
Indicates a potentially hazardous situation which, if not avoided, may result in
damage to property.
Pos: 11.4.6 /Alle Serien (Allgemeine Module)/Wichtige Erluterungen/Sicherheits- und sonstige Hinweise/Achtung/Achtung: _Warnung vor Sachschden durch elektrostatische Aufladung_ - Erluterung @ 13\mod_1343310227702_21.doc @ 101044 @ @ 1
Important Note!
Indicates a potential malfunction which, if not avoided, however, will not result in
damage to property.
Pos: 11.4.8 /Alle Serien (Allgemeine Module)/Wichtige Erluterungen/Sicherheits- und sonstige Hinweise/Information/Information: _Weitere Information allgemein_ - Erluterung @ 13\mod_1343310439814_21.doc @ 101051 @ @ 1
Manual
Version 1.1.0
WAGO-PERSPECTO 762 Notes about this Documentation 7
762-3057/000-001 CP 57 QVGA TV
Additional Information:
Refers to additional information which is not an integral part of this
documentation (e.g., the Internet).
Pos: 11.5 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
Manual
Version 1.1.0
8 Notes about this Documentation WAGO-PERSPECTO 762
762-3057/000-001 CP 57 QVGA TV
Pos: 11.6 /Alle Serien (Allgemeine Module)/Hinweise zur Dokumentation/Zahlensysteme @ 3\mod_1221059454015_21.doc @ 21711 @ 2 @ 1
Pos: 11.7 /Alle Serien (Allgemeine Module)/Hinweise zur Dokumentation/Schriftkonventionen @ 3\mod_1221059521437_21.doc @ 21714 @ 2 @ 1
Manual
Version 1.1.0
WAGO-PERSPECTO 762 Important Notes 9
762-3057/000-001 CP 57 QVGA TV
Pos: 13 /Alle Serien (Allgemeine Module)/berschriften fr alle Serien/Wichtige Erluterungen/Wichtige Erluterungen - berschrift 1 @ 4\mod_1241428899156_21.doc @ 32170 @ 1 @ 1
2 Important Notes
Pos: 14.1 /Alle Serien (Allgemeine Module)/Wichtige Erluterungen/Einleitung Wichtige Erluterungen @ 3\mod_1221059818031_21.doc @ 21717 @ @ 1
Manual
Version 1.1.0
10 Important Notes WAGO-PERSPECTO 762
762-3057/000-001 CP 57 QVGA TV
Pos: 14.6 /Serie 762 (PERSPECTO)/Wichtige Erluterungen/Bestimmungsgeme Verwendung 0762-xxxx @ 9\mod_1294733371727_21.doc @ 68139 @ 3 @ 1
Pos: 14.7 /Alle Serien (Allgemeine Module)/Wichtige Erluterungen/Technischer Zustand der Gerte - berschrift 3 und Inhalt @ 3\mod_1221060446109_21.doc @ 21723 @ 3 @ 1
Please send your request for modified and new hardware or software
configurations directly to WAGO Kontakttechnik GmbH & Co. KG.
Pos: 14.8 /Serie 762 (PERSPECTO)/Wichtige Erluterungen/Sicherheitshinweise/Hinweis/Hinweis: Pixelfehler im TFT-Display @ 10\mod_1306840913476_21.doc @ 73481 @ @ 1
Manual
Version 1.1.0
WAGO-PERSPECTO 762 Important Notes 11
762-3057/000-001 CP 57 QVGA TV
Pos: 14.10 /Alle Serien (Allgemeine Module)/berschriften fr alle Serien/Wichtige Erluterungen/Sicherheitshinweise - berschrift 2 @ 6\mod_1260180299987_21.doc @ 46724 @ 2 @ 1
For installing and operating purposes of the relevant device to your system the
following safety precautions shall be observed:
Pos: 14.12.1 /Alle Serien (Allgemeine Module)/Wichtige Erluterungen/Sicherheits- und sonstige Hinweise/Gefahr/Gefahr: Nicht an Gerten unter Spannung arbeiten! @ 6\mod_1260180365327_21.doc @ 46727 @ @ 1
Pos: 14.12.4 /Alle Serien (Allgemeine Module)/Wichtige Erluterungen/Sicherheits- und sonstige Hinweise/Gefahr/Gefahr: Auf normgerechten Anschluss achten! @ 6\mod_1260180753479_21.doc @ 46739 @ @ 1
Pos: 14.13.1 /Alle Serien (Allgemeine Module)/Wichtige Erluterungen/Sicherheits- und sonstige Hinweise/Achtung/Achtung: Defekte oder beschdigte Gerte austauschen! @ 6\mod_1260180857358_21.doc @ 46743 @ @ 1
Manual
Version 1.1.0
12 Important Notes WAGO-PERSPECTO 762
762-3057/000-001 CP 57 QVGA TV
Manual
Version 1.1.0
WAGO-PERSPECTO 762 Device Description 13
762-3057/000-001 CP 57 QVGA TV
Pos: 16 /Alle Serien (Allgemeine Module)/berschriften fr alle Serien/Gertebeschreibung/Gertebeschreibung - berschrift 1 @ 3\mod_1233756084656_21.doc @ 27096 @ 1 @ 1
3 Device Description
Pos: 17 /Serie 762 (PERSPECTO)/Gertebeschreibung/Beschreibung/Gertebeschreibung 0762-xxxx allgemein @ 9\mod_1294144990053_21.doc @ 67820 @ @ 1
The 762 Series panels are used to operate and visualize the controllers of the
WAGO-I/O-SYSTEM. The integrated WAGO-AUTOMATION COCKPIT
development environment is used to program the panels and controllers.
Pos: 18 /Serie 762 (PERSPECTO)/Gertebeschreibung/Beschreibung/Gertebeschreibung 0762-3xxx/0000-000x CPTV @ 9\mod_1294213875416_21.doc @ 67880 @ 2 @ 1
Manual
Version 1.1.0
14 Device Description WAGO-PERSPECTO 762
762-3057/000-001 CP 57 QVGA TV
Pos: 20 /Alle Serien (Allgemeine Module)/berschriften fr alle Serien/Gertebeschreibung/Ansicht - berschrift 2 @ 4\mod_1240984217343_21.doc @ 31958 @ 2 @ 1
3.2 View
Pos: 21 /Serie 762 (PERSPECTO)/Gertebeschreibung/Ansicht/Frontansicht 0762-x057/xxxx-xxxx @ 9\mod_1294145233531_21.doc @ 67823 @ 3 @ 1
Manual
Version 1.1.0
WAGO-PERSPECTO 762 Device Description 15
762-3057/000-001 CP 57 QVGA TV
Pos: 23 /Serie 762 (PERSPECTO)/Gertebeschreibung/Ansicht/Rckansicht 0762-3057/xxxx-xxxx @ 10\mod_1313591863026_21.doc @ 77194 @ 3 @ 1
Manual
Version 1.1.0
16 Device Description WAGO-PERSPECTO 762
762-3057/000-001 CP 57 QVGA TV
Pos: 25 /Alle Serien (Allgemeine Module)/berschriften fr alle Serien/Gertebeschreibung/Anschlsse - berschrift 2 @ 4\mod_1240984262656_21.doc @ 31961 @ 2 @ 1
3.3 Connectors
Pos: 26.1 /Serie 762 (PERSPECTO)/Gertebeschreibung/Anschlsse/Anschluss X1 Versorgungsspannung @ 9\mod_1294223878130_21.doc @ 67929 @ 3 @ 1
1 2 3
Manual
Version 1.1.0
WAGO-PERSPECTO 762 Device Description 17
762-3057/000-001 CP 57 QVGA TV
Pos: 26.3 /Serie 762 (PERSPECTO)/Gertebeschreibung/Anschlsse/Anschluss X2 - Serielle Schnittstellen RS-232 (COM 3) und RS-485/RS-422 (COM 2) @ 10\mod_1306214598744_21.doc @ 73090 @ 3 @ 1
RS232
RS485/
RS422
1
6
9
5
Manual
Version 1.1.0
18 Device Description WAGO-PERSPECTO 762
762-3057/000-001 CP 57 QVGA TV
Pos: 26.5 /Serie 762 (PERSPECTO)/Gertebeschreibung/Anschlsse/Anschluss X3 - Serielle Schnittstelle RS-232 (COM 1) @ 9\mod_1294224260741_21.doc @ 67937 @ 3 @ 1
5
1
3 3
9
4 4
5 5
6 6
9 7 7
1
5
8 8
9 9
1
1:1
1 1
2 2
5
1
3 3
6
9
9
4 4
5
5 5
6 6
7 7
9
1
5
8 8
9 9
Manual
Version 1.1.0
WAGO-PERSPECTO 762 Device Description 19
762-3057/000-001 CP 57 QVGA TV
Pos: 26.7 /Serie 762 (PERSPECTO)/Gertebeschreibung/Anschlsse/Anschluss X5 - CAN-Schnittstelle 0 @ 9\mod_1294224520981_21.doc @ 67945 @ 3 @ 1
The CAN 0 interface is designed with electrical isolation in accordance with ISO
11898. A terminating resistor that can be switched on by relay is integrated in the
device in accordance with ISO11898.
8 1
Manual
Version 1.1.0
20 Device Description WAGO-PERSPECTO 762
762-3057/000-001 CP 57 QVGA TV
Pos: 26.9 /Serie 762 (PERSPECTO)/Gertebeschreibung/Anschlsse/Anschluss X6 - Ethernet-Schnittstelle 10/100 MBit @ 9\mod_1294225066866_21.doc @ 67949 @ 3 @ 1
The connections and cables must meet CAT.5 and the guidelines for Ethernet
interfaces.
If there are more than 2 devices in a network, then they must be connected to each
other by a HUB or SWITCH. A "1:1" cable is used here.
8 1
Manual
Version 1.1.0
WAGO-PERSPECTO 762 Device Description 21
762-3057/000-001 CP 57 QVGA TV
Pos: 26.11 /Serie 762 (PERSPECTO)/Gertebeschreibung/Anschlsse/Anschluss X8/X9 - USB-Schnittstellen Typ A @ 9\mod_1294225243422_21.doc @ 67953 @ 3 @ 1
The following table and illustration provide information on the pin assignment of
the interfaces. The interface connection meets the USB specification 2.0.
1 1
2 2
3 3
4 4
Manual
Version 1.1.0
22 Device Description WAGO-PERSPECTO 762
762-3057/000-001 CP 57 QVGA TV
Pos: 28 /Alle Serien (Allgemeine Module)/berschriften fr alle Serien/Gertebeschreibung/Batteriefach - berschrift 2 @ 9\mod_1296045996505_21.doc @ 68960 @ 2 @ 1
If you want to change the lithium battery during a power failure, make sure that
you have the new battery ready to hand. For a certain time a gold cap capacitor
provides the required power. The data of the volatile memory (SRAM) is
therefore preserved during a battery exchange.
At room temperature, the battery has a life span of about one year.
It is possible to check the capacity of the battery via the CoDeSys function
SysRtcCheckBattery.
Pos: 31 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
Manual
Version 1.1.0
WAGO-PERSPECTO 762 Device Description 23
762-3057/000-001 CP 57 QVGA TV
Pos: 32 /Alle Serien (Allgemeine Module)/berschriften fr alle Serien/Gertebeschreibung/Speicherkartensteckplatz - berschrift 2 @ 9\mod_1296046052394_21.doc @ 68963 @ 2 @ 1
The panel 762-3057/000-001 is equipped with a Flash memory slot on the side for
an SD card. It supports cards with a 2 GB maximum. Supported memory cards
(item no. 758-879/000-001) are available from WAGO.
Pos: 34 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
Manual
Version 1.1.0
24 Device Description WAGO-PERSPECTO 762
762-3057/000-001 CP 57 QVGA TV
Pos: 35 /Alle Serien (Allgemeine Module)/berschriften fr alle Serien/Gertebeschreibung/Bedienelemente - berschrift 2 @ 4\mod_1239191655456_21.doc @ 30439 @ 2 @ 1
Manual
Version 1.1.0
WAGO-PERSPECTO 762 Device Description 25
762-3057/000-001 CP 57 QVGA TV
Pos: 38 /Alle Serien (Allgemeine Module)/berschriften fr alle Serien/Gertebeschreibung/Technische Daten - berschrift 2 @ 3\mod_1232967587687_21.doc @ 26924 @ 2 @ 1
3.7.1 Housing
Table 11: Technical data housing
Front panel Plastic, polyester film
Housing material Plastic
Dimensions (W x H x L) 208 mm x 150 mm x 42 mm
Panel cutout (B x H) 198 mm x 140 mm
Fixing means 4 clamping elements
Operating temperature 0 C ... +55 C
Storage temperature -10 C ... +60 C
Relative humidity (without 10 % ... 85 %
condensation)
Weight 630 g
Degree of protection Front IP65,
back IP20
3.7.3 Display
Table 13: Technical data display
Display type TFT
Screen size (diagonal) 14.5 cm (5.7 )
Display colors 262,000 colors
Graphics resolution 320 x 240 pixels
Contrast ratio 500:1
Angle of view horizontal / vertical -70 ... +70 / -60 ... +70
Brightness 400 cd/m
HBT* 50,000 hrs.
Panel Touch, analog, resistive
Light transmission typ. 75 %
Durability 100,000 activations with touch pen
* HBT (Half Brightness Time) defines the LED chip brightness decrease to
50% original brightness at Ta = 25 2C and RH = 60 10%.
Manual
Version 1.1.0
26 Device Description WAGO-PERSPECTO 762
762-3057/000-001 CP 57 QVGA TV
3.7.4 Hardware
Table 14: Technical data hardware
Processor 32-bit ARM9 200 MHz
RAM / Flash / SRAM 64 Mbyte / 64 Mbyte / 1 Mbyte
Memory expansion SD card (max. 2 GB)
3.7.5 Software
Table 15: Technical data software
Operating system Windows CE 6.0
Software configuration PLC runtime with target visualisation
(CoDeSys),
panel configuration software
3.7.6 Interfaces
Table 16: Technical data interfaces
USB interfaces 2 x USB2.0 host (type A)
Ethernet interface 1 x 10/100 Mbit RJ-45
CAN interface 1 x CANopen RJ-45
Serial interfaces 1 x RS-232 D-sub 9,
1 x RS-232 + RS-485 D-sub 9
Maximum length of connecting cables USB: maximum 3 m
Serial RS-232: maximum 10 m
Serial RS-485/RS-422: maximum 30 m
Power supply: maximum 3 m to power
supply
Pos: 40 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
Manual
Version 1.1.0
WAGO-PERSPECTO 762 Device Description 27
762-3057/000-001 CP 57 QVGA TV
Pos: 41 /Alle Serien (Allgemeine Module)/berschriften fr alle Serien/Gertebeschreibung/Zulassungen - berschrift 2 @ 3\mod_1224055364109_21.doc @ 24030 @ 2 @ 1
3.8 Approvals
Pos: 42 /Serie 762 (PERSPECTO)/Gertebeschreibung/Zulassungen/Zulassungen Panel 762-xxxx/xxxx-xxxx Allgemein, ohne Variantenangabe @ 9\mod_1294226972032_21.doc @ 67917 @ @ 1
Conformity Marking
Pos: 43.2 /Alle Serien (Allgemeine Module)/Zulassungen/Standardzulassungen/cULus (UL508) @ 3\mod_1224055013140_0.doc @ 24020 @ @ 1
CULUS UL508
Pos: 43.3 /Dokumentation allgemein/Gliederungselemente/------Leerzeile------ @ 3\mod_1224662755687_0.doc @ 24460 @ @ 1
Pos: 44 /Serie 762 (PERSPECTO)/Gertebeschreibung/Zulassungen/Zulassungen Panel 762-xxxx/xxxx-xxxx Schiff, ohne Variantenangabe @ 11\mod_1318997607906_21.doc @ 82144 @ @ 1
Pos: 47 /Alle Serien (Allgemeine Module)/berschriften fr alle Serien/Gertebeschreibung/Normen und Richtlinien - berschrift 2 @ 4\mod_1242804031875_21.doc @ 33646 @ 2 @ 1
Manual
Version 1.1.0
28 Mounting WAGO-PERSPECTO 762
762-3057/000-001 CP 57 QVGA TV
Pos: 54 /Alle Serien (Allgemeine Module)/berschriften fr alle Serien/Montieren - Demontieren/Montieren - berschrift 1 @ 3\mod_1225446744750_21.doc @ 24900 @ 1 @ 1
4 Mounting
Pos: 55 /Serie 762 (PERSPECTO)/Montieren/Montieren 0762-xxxx - Frontplattenmontage mit Zwischenblech @ 11\mod_1318334063049_21.doc @ 81080 @ 2 @ 1
The PERSPECTO Series panels are used in the panel cutout provided and bolted
down with the included clamping elements and the intermediate plate from behind
(note the following installation diagram).
1. ! 2. 3.
!
Manual
Version 1.1.0
WAGO-PERSPECTO 762 Mounting 29
762-3057/000-001 CP 57 QVGA TV
Manual
Version 1.1.0
30 Connect Devices WAGO-PERSPECTO 762
762-3057/000-001 CP 57 QVGA TV
Pos: 57 /Alle Serien (Allgemeine Module)/berschriften fr alle Serien/Anschlieen/Gerte anschlieen - berschrift 1 @ 3\mod_1234172889468_21.doc @ 27460 @ 1 @ 1
5 Connect Devices
Pos: 58 /Serie 762 (PERSPECTO)/Anschlieen/Gerte anschlieen 0762-1xxx, 0762-3xxx/xxxx-xxxx RS-232/RS-845/RS-422 @ 9\mod_1294149028298_21.doc @ 67844 @ @ 1
The RS-232 interface is used to program and diagnose the devices. Various
software tools can be used for modem operation, remote maintenance, etc.
Manual
Version 1.1.0
WAGO-PERSPECTO 762 Commissioning 31
762-3057/000-001 CP 57 QVGA TV
Pos: 60 /Alle Serien (Allgemeine Module)/berschriften fr alle Serien/Inbetriebnehmen - Konfigurieren - Parametrieren/In Betrieb nehmen - berschrift 1 @ 4\mod_1240901452750_21.doc @ 31570 @ 1 @ 1
6 Commissioning
Pos: 61 /Serie 762 (PERSPECTO)/In Betrieb nehmen/Einschalten @ 9\mod_1294213097437_21.doc @ 67860 @ 2 @ 1
6.1 Switch on
After applying the power supply, the device switches on automatically.
After the boot and self-test phase that lasts about 10 seconds, the programs set in
the WAGO Control Center (e.g. HMI runtime) are launched automatically.
To stop the programs and Windows CE desktop for configuring the panels from
launching automatically, the touch screen must be touched within a adjustable
time period (default setting 3 s) after the boot & self-test phase.
The service switch on the back of the device can be used to launch the Windows
CE desktop at any time.
The WAGO Control Center can be used to change the start behavior of the device.
Manual
Version 1.1.0
32 Commissioning WAGO-PERSPECTO 762
762-3057/000-001 CP 57 QVGA TV
Pos: 63.1 /Serie 762 (PERSPECTO)/In Betrieb nehmen/IP-Adresse/IP-Adresse des Gertes - berschrift 1 und Allgemein - berschrift 2 @ 10\mod_1313595852427_21.doc @ 77246 @ 23 @ 1
The WAGO Control Center installed on the device is used to assign the IP address
by default (observe "Setting the IP Address" section).
The device can either draw its IP address from a DHCP server on the network or
the device can be assigned a fixed IP address.
Pos: 63.4 /Serie 762 (PERSPECTO)/In Betrieb nehmen/IP-Adresse/Einstellen der IP-Adresse @ 9\mod_1294213504226_21.doc @ 67866 @ 3 @ 1
Manual
Version 1.1.0
WAGO-PERSPECTO 762 Commissioning 33
762-3057/000-001 CP 57 QVGA TV
6.2.3 IP Address
When using a crossover cable to connect between the panel and configuring PC
directly, it is recommended that both devices have fixed IP addresses with an open
address in the range 192.168.1.xxx.
IP Address
The devices must be set to different IP addresses.
Manual
Version 1.1.0
34 Commissioning WAGO-PERSPECTO 762
762-3057/000-001 CP 57 QVGA TV
Pos: 65.1 /Serie 762 (PERSPECTO)/In Betrieb nehmen/WAGO Control Center/Das WAGO Control Center @ 9\mod_1294215383354_21.doc @ 67872 @ 2 @ 1
The tabs of the WAGO Control Center are explained on the following pages.
Pos: 65.3 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
Manual
Version 1.1.0
WAGO-PERSPECTO 762 Commissioning 35
762-3057/000-001 CP 57 QVGA TV
Pos: 65.4 /Serie 762 (PERSPECTO)/In Betrieb nehmen/WAGO Control Center/Registerkarte General @ 9\mod_1294216222373_21.doc @ 67888 @ 3 @ 1
Device Information
Information about the device is found here. This information is important, for
example, for support cases.
General
Watchdog:
A watchdog can be configured here, which can restart the device if it
crashes after a set time.
Client Only
If the checkbox is enabled, the internal SNTP server is disabled.
Pos: 65.5 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
Manual
Version 1.1.0
36 Commissioning WAGO-PERSPECTO 762
762-3057/000-001 CP 57 QVGA TV
Pos: 65.6 /Serie 762 (PERSPECTO)/In Betrieb nehmen/WAGO Control Center/Registerkarte Autostart Applications - 0762-3xxx/0000-000x CPTV @ 9\mod_1294222787415_21.doc @ 67920 @ 3 @ 1
The time window for launching the programs after the boot and self-test phase of
the device can also be set here.
Manual
Version 1.1.0
WAGO-PERSPECTO 762 Commissioning 37
762-3057/000-001 CP 57 QVGA TV
Pos: 65.8 /Serie 762 (PERSPECTO)/In Betrieb nehmen/WAGO Control Center/Registerkarte Users @ 9\mod_1294223195152_21.doc @ 67923 @ 3 @ 1
User/Virtual Roots:
A directory from another (protected) tree, for example, can be put in the user's
home directory. By doing so, you gain access to this and subsequent directories.
Rights:
Access rights assigned to users are displayed here.
Access Rights
If no home directory is set for a user, the user gets FULL ACCESS to the panel
despite disabled write access. Enter at least on \ in the home directory.
Manual
Version 1.1.0
38 Commissioning WAGO-PERSPECTO 762
762-3057/000-001 CP 57 QVGA TV
Pos: 65.10 /Serie 762 (PERSPECTO)/In Betrieb nehmen/WAGO Control Center/Registerkarte FTP @ 9\mod_1294223722918_21.doc @ 67926 @ 3 @ 1
More information about creating users is available in the "Users Tab" section.
Manual
Version 1.1.0
WAGO-PERSPECTO 762 Commissioning 39
762-3057/000-001 CP 57 QVGA TV
Pos: 65.12 /Serie 762 (PERSPECTO)/In Betrieb nehmen/WAGO Control Center/Registerkarte HTTP @ 9\mod_1294225628954_21.doc @ 67957 @ 3 @ 1
Application example:
An \httptest directory with the /test alias was created on the flash disk.
The page can be used in a Web browser to access the following address:
Manual
Version 1.1.0
40 Commissioning WAGO-PERSPECTO 762
762-3057/000-001 CP 57 QVGA TV
Pos: 65.14 /Serie 762 (PERSPECTO)/In Betrieb nehmen/WAGO Control Center/Registerkarte RAS @ 9\mod_1294225745496_21.doc @ 67960 @ 3 @ 1
The connection between a RAS client and the RAS server can be established via a
modem, VPM or direct connection.
For more information about the Remote Access Service (RAS) of the device,
please contact WAGO Support.
Pos: 65.15 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
Manual
Version 1.1.0
WAGO-PERSPECTO 762 Commissioning 41
762-3057/000-001 CP 57 QVGA TV
Pos: 65.16 /Serie 762 (PERSPECTO)/In Betrieb nehmen/WAGO Control Center/Registerkarte Backup/Restore - 0762-3xxx/0000-000x @ 9\mod_1294225990268_21.doc @ 67963 @ 3 @ 1
Doing so allows you to restore the data to the new device when replacing a
defective device without having to redo all the settings.
What data and files should be saved is defined by the backup_restore.cfg file. The
file is stored on the device via the path \Flashdisk\SysExtras\Tools\
backup_restore.cfg
[REGISTRY]
"\Memory Stick\wago\backup\registry.reg"
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BackLight];MaxIntensity
The section devices the registry entries to be saved. The path indicates where the
registry entries shall be saved.
[SRAM]
;Destination path; filename or automatically sram.bin
"\Memory Stick\wago\backup\sram"
[FILES]
default.*;"\FlashDisk\PLCWinCE\";"\Memory Stick\wago\backup\FlashDis
k\ElaDesign\"
default.*; specified the file that should be saved. Wildcards such as *.*
and.* are permitted.
Manual
Version 1.1.0
42 Commissioning WAGO-PERSPECTO 762
762-3057/000-001 CP 57 QVGA TV
Create backup!
It is recommended that you create a backup after commissioning the device and to
keep the backup in a safe place.
Manual
Version 1.1.0
WAGO-PERSPECTO 762 Commissioning 43
762-3057/000-001 CP 57 QVGA TV
Pos: 65.18 /Serie 762 (PERSPECTO)/In Betrieb nehmen/WAGO Control Center/Registerkarte Advanced - 0762-3xxx/0000-000x CPTV @ 9\mod_1294226255805_21.doc @ 67966 @ 3 @ 1
Communication
COM-Port:
Pos: 65.19 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
Selection of X2 interface usage (not possible for CP35 TV and CP57 TV).
Manual
Version 1.1.0
44 Commissioning WAGO-PERSPECTO 762
762-3057/000-001 CP 57 QVGA TV
Pos: 65.20 /Serie 762 (PERSPECTO)/In Betrieb nehmen/WAGO Control Center/Speichern der Konfiguration @ 9\mod_1294226632900_21.doc @ 67969 @ 3 @ 1
Manual
Version 1.1.0
WAGO-PERSPECTO 762 Commissioning 45
762-3057/000-001 CP 57 QVGA TV
Pos: 67 /Serie 762 (PERSPECTO)/In Betrieb nehmen/Target Visu @ 9\mod_1294227049837_21.doc @ 67972 @ 2 @ 1
6.4 Target-Visu
The following status window appears after starting the Target-Visu panel:
This window displays the loaded CoDeSys programs with project details. The
CoDeSys program can also be started or reset from here. The [Shutdown] button
can be used to exit the runtime.
Pos: 68 /Serie 762 (PERSPECTO)/In Betrieb nehmen/Hinweis Task-Proiritt 0762-3035/0000-0001 CPTV 35, 0762-3057/0000-0001 CPTV 57 @ 9\mod_1295868488022_21.doc @ 68736 @ 2 @ 1
6.5 Note
Task Priority
When creating a CoDeSys project, both VISU_TASK with priority 21 and
VISU_INPUT_TASK with priority 20 are being created. If possible, these
priorities should not be modified.
Manual
Version 1.1.0
46 Service WAGO-PERSPECTO 762
762-3057/000-001 CP 57 QVGA TV
Pos: 70 /Alle Serien (Allgemeine Module)/berschriften fr alle Serien/Service - berschrift 1 @ 4\mod_1241771948421_21.doc @ 32830 @ 1 @ 1
7 Service
Pos: 71 /Serie 762 (PERSPECTO)/Service/Batterie wechseln @ 9\mod_1294738564312_21.doc @ 68141 @ 2 @ 1
Data loss!
If the device is switched off when the battery has failed or has reached its capacity
without replacing the battery, any settings not saved are lost.
The battery in the device control buffers the adjustable parameters and the time
for a power failure or switched off device.
1. Make sure that the device has been on for at least 10 minutes before
replacing the battery, allowing the buffer capacitors to load.
It is possible to check the capacity of the battery via the CoDeSys function
SysRtcCheckBattery.
=== Ende der Liste fr Textmarke Inhalt_mitte ===
Manual
Version 1.1.0
WAGO-PERSPECTO 762 List of Figures 47
762-3057/000-001 CP 57 QVGA TV
Pos: 74 /Dokumentation allgemein/Verzeichnisse/Abbildungsverzeichnis - ohne Gliederung - und Verzeichnis @ 3\mod_1219222916765_21.doc @ 21080 @ @ 1
List of Figures
Figure 1: Front view .............................................................................................. 14
Figure 2: Back view .............................................................................................. 15
Figure 3: Connector X1 supply voltage ............................................................. 16
Figure 4: Connector X2 serial interfaces RS-232 and RS-485/RS422 .............. 17
Figure 5: Connector X3 serial interface RS-232 ................................................ 18
Figure 6: Connector X5 CAN 0 interface RJ-45................................................ 19
Figure 7: Connector X6 - Ethernet RJ45............................................................... 20
Figure 8: Connector X8/X9 USB interfaces....................................................... 21
Figure 9: Battery case............................................................................................ 22
Figure 10: Service button ...................................................................................... 24
Figure 11: Installation of the clamping elements .................................................. 28
Figure 12: Detailed photograph of installation with intermediate plate................ 29
Figure 13: IP address............................................................................................. 33
Figure 14: General tab ....................................................................................... 35
Figure 15: Autostart Applications tab................................................................ 36
Figure 16: Users tab........................................................................................... 37
Figure 17: FTP tab ............................................................................................. 38
Figure 18: HTTP tab .......................................................................................... 39
Figure 19: RAS tab ............................................................................................ 40
Figure 20: Backup/Restore tab .......................................................................... 42
Figure 21: Advanced tab.................................................................................... 43
Figure 22: PLCWinCE status window .................................................................. 45
Manual
Version 1.1.0
48 List of Tables WAGO-PERSPECTO 762
762-3057/000-001 CP 57 QVGA TV
Pos: 76 /Dokumentation allgemein/Verzeichnisse/Tabellenverzeichnis - ohne Gliederung - und Verzeichnis @ 3\mod_1219222958703_21.doc @ 21084 @ @ 1
List of Tables
Table 1: Number Notation....................................................................................... 8
Table 2: Font Conventions ...................................................................................... 8
Table 3: Legend acc. to figure Front view......................................................... 14
Table 4: Legend acc. to figure Back view ......................................................... 15
Table 5: X1 pin assignment................................................................................... 16
Table 6: X2 pin assignment................................................................................... 17
Table 7: X3 pin assignment................................................................................... 18
Table 8: X5 pin assignment................................................................................... 19
Table 9: X6 pin assignment................................................................................... 20
Table 10: X8 pin assignment................................................................................. 21
Table 11: Technical data housing.......................................................................... 25
Table 12: Technical data power supply................................................................. 25
Table 13: Technical data display........................................................................... 25
Table 14: Technical data hardware ....................................................................... 26
Table 15: Technical data software......................................................................... 26
Table 16: Technical data interfaces....................................................................... 26
Manual
Version 1.1.0
WAGO-PERSPECTO 762 49
762-3057/000-001 CP 57 QVGA TV
Pos: 78 /Dokumentation allgemein/Einband/Einband Handbuch - Leerseite fr gerade Seitenzahl @ 3\mod_1219230851078_0.doc @ 21123 @ @ 1
Manual
Version 1.1.0
Pos: 79 /Dokumentation allgemein/Einband/Einband Handbuch - Rckseite @ 9\mod_1285229376516_21.doc @ 64944 @ @ 1
Internet: http://www.wago.com
=== Ende der Liste fr Textmarke Einband_hinten ===