C A
B
B
Side view of 2pcs 20 ohms W resistor
C
PCB with parts removed
Do not remove
Solder mini fuse holder and add 1A mini fuse
Solder 39ohms 1/4W resistor
Connect to external current clamp
Not used
Must observe polarity
Modify wiring as shown
Modify wiring as shown
Note: Power (#22 brown and blue wire) for the controller
circuit is taken directly from the terminal block and not after
the current transformer(very important). Follow wire color
properly.
GND
To GTIL
external current clamp
GTIL Controller version 2 component side