Heating systems
Industrial systems
Refrigeration systems
2/3
The rising cost of fossil fuels and growing environmental awareness have lead
to a steady increase in demand for renewable forms of energy. On the following
pages, we will provide you with comprehensive information about efficiently
burning wood, a sustainable fuel, in advanced boilers.
Wood reaches its highest caloric value after being stored for
several years in a well-protected place. If you heat with wood or
wood pellets, there are certain points to bear in mind regarding
purchase and storage.
Viessmann trade partners can tell you all you need to know
about tailor-made heating technology, available subsidies and
nance options, without obligation and free of charge.
"Nothing is so good that it cannot be improved". Wood is a good alternative Viessmann offers energy saving
heating systems for all applications
This motto is also reected in our company Based on today's energy prices and taking
and fuel types.
principles. Viessmann can rightfully claim to into account the overall investment outlay, a
be the leader in quality and technology, and as wood heating system is a viable alternative.
such, aims to continually set new standards. Viessmann wood boilers are highly efficient
and economical in their fuel consumption.
Of course, this applies in particular to the
company's product range, which is consistently Viessmann wood boilers are suitable both as
geared towards signicantly lowering the the sole heat generator and as a supplement
consumption of fossil fuels and gradually to oil or gas boilers. By installing a wood
replacing them with renewable sources of boiler, spending on oil and gas is reduced
energy. signicantly so the boiler starts paying
for itself almost immediately. You will be
At around 40 percent, the heating sector making a positive contribution towards the
actually accounts for the largest proportion sustainable protection of our climate, as
of energy consumption. The rest is shared heating with wood is CO2 neutral. This means
by freight, personal transport and power that only as much carbon dioxide is released
generation, each accounting for 20 percent. into the atmosphere as the wood absorbed
These values can also be applied approximately while it was growing.
to other industrial countries. Ever-rising
energy costs mean that the emphasis is on Viessmann has the right solution for you.
reducing the consumption of fossil fuels as
quickly as possible.
Wood energy
Sustainable and CO2 neutral
Photosynthesis
Key facts
Wood heating systems are offered for a wide range of wood fuels. See below for
information about the properties of this fuel and how it should be stored.
Vitoligno100-S
Log gasication boiler for
logs 25 and 50cm long,
20kW
Page 22
Vitoligno250-S
Log boiler for manual
charging with logs, wood
briquettes and wood
remnants
Hopper width
550mm: 40 to 75kW
1080mm: 85 to 170kW
Page 24
Vitoligno250-F
Wood boiler for manual
charging with logs and wood
briquettes, wood pieces and
loose wood remnants, as
well as for automatic charging
with wood pellets and
woodchips.
35 to 100kW
Page 26
Pellet boiler Vitoligno300-C
8 to 12kW
Compact, fully automatic pellet boiler for new and existing installations
The compact Vitoligno 300-C pellet boiler Automatic ash removal compresses the ash
is an efficient solution for new build and for in the ash box and ensures that it needs to
existing buildings of low energy standard. In be emptied no more than twice a year.
the output range of 2.4 to 8 or 2.4 to 12kW, the Due to the fact that the ash box is sealed,
pellet boiler modulates with a ratio of 1:3 and ash removal is also clean and stress-free.
features impressively low energy consumption.
Operating the Vitoligno300-C is extremely Flexible fuel feed
easy, making heating with wood pellets highly In the delivered condition, the Vitoligno300-C
Compact, fully automatic convenient. Almost everything is automatic is equipped with a vacuum system for
Vitoligno 300-C pellet boiler
from charging with wood pellets right through automatic pellet discharge from the pellet
to cleaning. store as standard. The Vitoligno 300-C
can be converted quickly and easily from
Compact dimensions for exible siting automatic to manual charging. Commercially
The pellet boiler allows exible and space available bags of wood pellets can be used for
efficient siting as all components are directly manual charging if necessary, e.g. if there is
accessible for service and maintenance. One insufficient space for a pellet store.
ideal option is to install it in the corner of the
boiler room. Viessmann offers a complete Matching accessories
The pellet box can be positioned range of accessories for pellet storage and For pellet stores, a modular 4- or 8-way wand
right next to the Vitoligno 300-C
transport from a single source. changeover is available. It is regulated by the
or, if preferred, anywhere inside
Ecotronic and ensures an even discharge of
the room.
Convenient automatic functions pellets from the pellet store by changing the
Wood pellets burn with few residues and wands over automatically. Installation of the
even these are taken care of automatically by wand system is exible and suitable for a
the Vitoligno 300-C. Fully automatic cleaning wide range of different storage spaces.
of the nned grate in the combustion chamber It ensures optimum use of the pellet store.
at least once a day. This guarantees low
losses and excellent fuel utilisation.
Vitoligno300-C
1
3
1 Integral suction turbine with connection for
4 supply and return hose
5 2 All connections at the top optional corner
6 installation
3 Ecotronic control unit with user prompts
4 Variable speed ue gas fan for modulating
operation
5 Built-in regulated return temperature
7 raising facility with high efficiency pump
6 Pellet hopper for 32 kg of fuel
8 9 7 Rotary lock valve for 100 % burn-back
protection
10 8 Combustion chamber made from high
temperature-resistant ceramics
9 Highly effective thermal insulation
11
10 Self-cleaning nned grate made from
stainless steel
11 Automatic ash removal with large ash box
12/13
For manual charging from pellet sacks, the Take advantage of these benets
pellet box can be positioned right next to the
Vitoligno300-C or, if preferred, anywhere Fully automatic wood pellet boiler with a rated heating output range of
inside the room. A 260 kilogram load is 2.4 to 12kW
sufficient for up to ten days. Efficiency of up to 95.3% for excellent utilisation of wood-based energy
Innovative combustion technology for lowest dust emission levels meets the
Intelligent Ecotronic control unit rst German Immissions Ordinance (1st BImSchV), level 2.
Operating the Vitoligno 300-C is easy with Flexible, space saving installation may be sited in a corner
the weather-compensated digital Ecotronic Can be located anywhere as its operation does not depend on ambient air
control unit. Up to three heating circuits can Low power consumption due to automatic ignition with ceramic heating element
be controlled with the standard version. The Ecotronic control unit with plain text user prompts and automatic function
boiler with pellet supply, the heating circuits monitoring, plus solar and buffer cylinder charging control
and the cylinder temperature can all be Automatic ash removal from the combustion chamber through a stainless steel
controlled intuitively. Adjusting all relevant nned grate ensures highly reliable operation and long cleaning intervals
parameters is made easy by the clear display Ash box requires emptying only once or twice a year
with graphic capability and multiple line plain High operational reliability provided by rotary lock valve, for 100 percent
text user prompts. burn-back protection
Flexible fuel feed, e.g. pellet vacuum system or manual charging with pellet sack
Prepared for solar Extensive accessories for pellet supply and storage
In combination with a solar thermal
system, current solar data is also shown For specication, see page 28
on the display. The collector and cylinder
temperature are included in this data, as
are the operating hours of the solar thermal
system.
Pellet boiler Vitoligno300-C
18 to 48kW
Compact, fully automatic pellet boiler for new and existing installations
The Vitoligno300-C is a fully automatic pellet The boiler with pellet supply, the heating
boiler with output range from 6 to 48kW. circuits and the cylinder temperature can all
It offers versatile and exible supply system be controlled intuitively. Adjusting all relevant
options for almost any application. It stands parameters is made easy by the clear display
out on account of its compact design which with graphic capability and multiple line plain
is ideal for limited room heights. A suction text user prompts. In addition, an integrated
Wood pellets are the most tightly turbine and pellet hopper sufficient for one- assistant facilitates commissioning of the
compressed form of wood-based
day-operation are already integrated. Vitoligno300-C. Using the help function, the
energy.
installer is guided through the commissioning
Convenient automatic functions process by the control unit.
The pellet boiler is automated and convenient
to use. The automated features include Efficient and environmentally responsible
ignition, heat exchanger cleaning, self- The Vitoligno300-C has an efficiency of up
cleaning nned grate and fully automatic to 95percent when converting wood pellets
Ecotronic control unit with multiple compaction of ash inside the ash box. into heat. Modulation of 1:3 leads to low
line, illuminated display
The mobile ash box only needs emptying consumption and clean combustion under
once or twice a year. partial load conditions. A ceramic ignition
unit consumes little power, whilst innovative
Intelligent Ecotronic control unit combustion technology keeps dust values
Operating the Vitoligno 300-C is easy with low. This boiler meets the rst German
the weather-compensated digital Ecotronic Immissions Ordinance (1st BImSchV), level 2.
control unit. It regulates
up to three heating circuits with mixer, Matching accessories
two heating circuits with mixer and DHW The controlled return temperature raising
heating, or facility ensures the perfect hydraulic connection
one heating circuit with mixer, a solar circuit of the Vitoligno300-C. Delivered as a fully
and DHW heating; assembled unit, the return temperature raising
an additional fourth heating circuit with facility can be connected to the boiler within
mixer can be connected via the KM-BUS. a very short time.
4 1
5
Vitoligno300-C
Convenient central heating unit for automatic charging with wood pellets
The Vitoligno300-C biomass boiler offers with secondary air. This is due to the fact that
a multitude of automatic functions that both the constriction of the diameter and the
make for particularly convenient operation. twisted rebricks of the ame duct facilitate
These functions include an efficient ignition a turbulent mixing of the combustion gases
Wood pellets are the most tightly system with low power consumption, as for a complete burnout. The extremely heat-
compressed form of wood-based
well as fully automatic ash removal from the resistant silicon carbide stones also provide a
energy.
grate and heat exchanger. Because of the hot combustion zone. This leads to particularly
arrangement of the heat exchanger, very low emissions, meeting the rst German
little ash is deposited, making long cleaning Immissions Ordinance (1st BImSchV), level 2.
intervals possible. The turbulators provide a
permanently efficient heat transfer and lower Flexible fuel feed
dust emissions. Emptying the large sealable Depending on requirements and application,
and mobile ash box is an almost entirely dust- pellets can be charged into the boiler
free process. via either a exible screw conveyor or a
Vitotrol350-C with 5" colour vacuum system. Filling the pellet hopper is
touchscreen as remote control, control
Efficient and environmentally responsible particularly quiet, thanks to innovative sound-
loop extension and cascade controller
The Vitoligno300-C has an efficiency of up optimisation.
to 96percent when converting wood pellets
into heat. With its weather-compensated To save space, the fuel supply can be
control unit and a modulation range of 1:3, mounted on either the right or the left (from
the biomass boiler adapts its output precisely 80kW). Up to 70kW, with fuel supply from
to the current heat demand. This means that the back. This allows exible and space saving
the Vitoligno300-C has impressively low fuel positioning with single sided wall installation
consumption. to the right. No maintenance or inspection
work needs to be carried out from this side.
Variable combustion means high efficiency
and low emissions, with lambda supported Innovative and versatile control
primary and secondary air control. The The integral Ecotronic control unit regulates
secondary combustion chamber, developed the following:
using CFD simulation, facilitates an up to three heating circuits with mixer,
optimum mixing of the combustion gases two heating circuits with mixer and
DHW heating,
one heating circuit with mixer, a solar circuit
and DHW heating,
a fourth heating circuit with mixer for
connection via KM-BUS.
2
1
8
3 Vitoligno300-C, 80 to 101kW
Vitoligno300-C Vitoligno300-C
60 to 70kW 80 to 101kW
Convenient central heating unit for automatic charging with wood pellets or woodchips
The Vitoligno300-H has been designed for Up to 60kW, with fuel supply from the
great exibility when it comes to the small to back. This allows a exible and space saving
medium output range. The heating centre can positioning with single sided, wall installation
be charged with either pellets or woodchips. to the right. No maintenance or inspection
A multitude of automatic functions make the work needs to be carried out from this side.
Vitotrol350-C with 5" colour Vitoligno 300-H particularly easy to operate.
touchscreen as remote control,
These functions include an efficient ignition Futureproof through low emission levels
control loop extension and cascade
system with low power consumption, as Variable combustion means high efficiency
controller
well as fully automatic ash removal from the and low emissions, with regulated primary
grate and heat exchanger. Because of the and secondary air supply. Combustion gases
arrangement of the heat exchanger, very are combined with secondary air in the ame
little ash is deposited, making long cleaning duct, where because of its constricted
intervals possible. Emptying the large sealable diameter they are mixed very well. This
and mobile ash box is an almost entirely dust- ensures long burn-out times and thus
free process. complete combustion.
2
1
Vitoligno300-H Vitoligno300-H
50 to 60kW 80 to 101kW
The Vitoligno 200-S wood gasication boiler for logs is a good alternative to an oil or gas
heating system, as wood is affordable and CO2 neutral.
The Vitoligno 200-S is a high quality wood To ignite the fuel, an automatic ignition device
gasication boiler with output from 20 to 50 kW. is available as an optional extra. The control
In the output range 30 to 50 kW it operates in unit also enables programming of the required
modulating mode, variably adjusting its output ignition time.
to the respective heat demand. The large
stainless steel charging hopper can hold logs Digital control
up to 50cm long. The boiler control unit, with user prompts,
makes the operation of the Vitoligno200-S
The Vitotrol350-C remote control Heat-up in a matter of minutes particularly easy. Up to three heating circuits
unit with touchscreen won the
The heat-up process is complete after just can be controlled with the standard version.
prestigious red dot design award
a few minutes. A reduced oxygen feed to Buffer charging management is part of
from the Design Zentrum North
Rhine-Westphalia in 2014. the hopper ensures that the logs carbonise the control system. This ensures the best
rather than burn. The ignitable wood gas then possible utilisation of the buffer energy
burns cleanly and at high temperatures under whilst optimising the heat transfer by the
supply of secondary air. Secondary wood gas Vitoligno200-S. Re-use of residual heat in the
combustion enables the reliable control of full burnout provides savings on fuel costs of up
and partial loads. to 9 percent.
Easy cleaning
The Vitoligno200-S heat exchanger is quick
and easy to clean using a lever mechanism.
Thorough carbonisation ensures that very few
residues remain. This means that ash only
needs to be removed every two weeks or so,
even during the heating season.
5
Vitoligno200-S
7
10 1 Fully wired control unit with user prompts
2 Variable speed ue gas fan for modulating
11
operation
10 3 100 mm thick thermal insulation
4 Heating surfaces
5 Large hopper door
8
6 Convenient cleaning of heating surfaces
9 7 Large hopper
8 Combustion chamber made from durable
reclay
9 Automatic ignition (option)
12
10 Innitely variable primary and secondary air
11 Ignition door
12 Ash door
20/21
The Vitoligno 100-S log gasication boiler is an ideal companion appliance for an
existing oil or gas heating system. In dual mode, it reliably provides heating and
domestic hot water.
Whether you are looking for an auxiliary This compact companion boiler is optimised
appliance or a complete heating system, for use as an extension to an existing oil or
Viessmann offers the full product range for gas heating system. In dual mode, it covers
heating with wood. Choosing a Vitoligno 100-S the base demand for central heating and
Gasication technology of the wood boiler as a supplementary boiler is both domestic hot water. The conventional boiler
Vitoligno100-S economical and environmentally responsible. only starts up at extremely low temperatures,
Its other benets include high reliability and a to cover any peak load demands.
long service life for convenient central heating
and DHW heating. With a hopper volume of 100 litres, burnout
times of up to four hours are possible under
Signicantly increased independence full load. The Vitoligno100-S can be charged
from oil and gas, and cost savings gained with logs 40 to 50cm long.
through careful energy consumption are
further notable benets. Furthermore, an Thanks to gasication technology, the
investment such as modernising a heating Vitoligno100-S achieves a high combustion
system can also qualify for attractive subsidy efficiency. The solid hopper constructed
programmes. from 8mm thick steel plates and the reliable
induced draught fan ensure a long service life.
The ideal companion boiler
The Vitoligno 100-S is a very attractively
priced log gasication boiler with a rated
heating output of 20kW.
Vitoligno100-S
5
1 Vitotroniccontrol unit
4
7 6 2 Tubular heat exchanger
3 Side reclay lining with primary air outlet
4 Secondary air outlet in the combustion
8 chamber
5 Primary air slide valve
9 6 Secondary air slide valve
7 Combustion chamber made from
silicon carbide
8 Fireclay burnout channel
9 Cleaning aperture for ash removal
22/23
The Vitoligno 250-S was developed specically for the combustion of logs and represents
the very latest in combustion technology.
10
11 Vitoligno250-S
Vitoligno250-S
Log boiler for 50 cm logs, 40 to 75 kW
The Vitoligno 250-F is suitable for manual charging with logs, wood briquettes, wood
remnants with shavings and wood remnant pieces, as well as for automatic charging with
wood pellets and woodchips.
The Vitoligno 250-F can convert many forms The high efficiency of the Vitoligno 250-F
of wood fuel into heating energy. If the wood results from the long burnout path, optimum
boiler is equipped with automatic charging, heat transfer, self-cleaning boiler passes and
the fuel is automatically ignited by an ignition the utilisation of residual heat in the ash.
fan. Combined with a DHW cylinder, this In standard mode, the ash is automatically
permits perfect low-load control (DHW mode removed from the main combustion chamber
Vitoligno 250-F for fuel exibility in summer). into the front combustion chamber, where it
remains until it has ceased to glow.
Self-cleaning heat exchanger surfaces
The vertical heat exchanger surfaces are Large hopper
permanently cleaned by motorised coil The large hopper above the combustion
springs. The drive mechanism is situated chamber allows for convenient operation with
low down in the protected, cool gas ow. logs. A simple push of a button is enough to
The springs can be removed easily for annual change over to log combustion (patented air
cleaning by the ue gas inspector. damper function).
Vitoligno250-F
1 Weather-compensated control
2 Front combustion chamber charged from
the top
3 Automatic ignition fan
4 Feed screw conveyor and degassing grate
with primary air
12 13 5 Combustion chamber door with primary air
damper
6 Large ash chamber with utilisation of
residual heat
7 Combustion chamber made from
2 heat-resistant refractory concrete
1
8 Automatic ash removal from the
combustion chamber
9 Drive for automatic ash removal and
cleaning
10 Secondary combustion chamber (secondary
4
3 air via combustion chamber door)
10 11 11 Variable speed ue gas fan with Lambda
7 probe and temperature sensor
12 Tubular heat exchanger with automatic
5
8 cleaning
9 13 Return temperature raising facility included
6 in the standard delivery (boiler assembly)
with boiler circuit pump, boiler control valve,
ow and return sensors
26/27
Vitoligno300-C
Dimensions
Length mm 770 770
Width mm 850 850
Height mm 1250 1250
Vitoligno300-C
Vitoligno300-C
Vitoligno300-H
Vitoligno300-C
Vitoligno300-H
Dimensions
Length (depth with feed screw conveyor) mm 2044 2044
Width (boiler) mm 1134 1134
Height mm 1700 1700
Vitoligno300-H
Dimensions
Length (depth) mm 1721 1721 1721
Width (boiler) mm 865 865 865
Width (with feed screw conveyor) mm 1765 1765 1765
Width (with pellet hopper) mm 1926 1926 1926
Height mm 1856 1856 1856
Height of pellet hopper mm 1856 1856 1856
Vitoligno200-S
Dimensions
Length mm 1165 1165 1165 1165
Width mm 714 714 714 714
Height mm 1587 1587 1797 1797
Vitoligno100-S
Dimensions
Length mm 1277
Width mm 618
Height mm 1220
Weight kg 466
Vitoligno250-F
Vitoligno250-S
For 50 cm logs
Vitoligno250-S
For 1 m logs
Vitoligno250-F
"The whole is greater than the sum of its Viessmann system technology incorporates
parts". In accordance with this philosophy, everything which constitutes a reliable
Viessmann supplies more than high quality, heating system that is economical to run:
reliable and effective heating components. In powerful Vitocell DHW cylinders for high
fact, all products are part of a matching total DHW convenience, as well as high quality
concept, where all components complement solar thermal systems for cost effective DHW
one another. After all, only perfect interaction heating and central heating backup.
between all system components can draw
out the maximum potential of our innovative Naturally this also includes the complete
leading technology. range of accessories for pellet storage with
discharge systems for every application area.
32/33
System components
Extensive accessories for operating wood
heating systems. Fuel storage with discharge
systems for every application.
Operating convenience
Clear, convenient and intelligent: The boiler
and heating circuit control units offer perfect
functionality for fast and precise control of
any heating system. The intelligent control
extension also enables the integration of other
control loops as well as boilers.
DHW cylinders
DHW convenience for every aspiration
VitocellDHW cylinders are convenient
solutions for supplying a household with
hot water the perfect complement to any
new wood boiler.
System accessories
Radiators, expansion vessels, pipework
systems, pumps, lters and valves Vitoset
offers the complete range of accessories for
your Viessmann heating system.
Pellet silo
For lasting and reliable operation, the pellet The access route must be suitable for tankers.
boiler, discharge system and pellet store must Generally a road width of at least three metres
form an integrated unit. and an overhead clearance of at least four
metres is required.
Pellets can be supplied by means of tankers
and blown into the pellet store. If possible, the pellet store should adjoin
an outside wall. There should be a 230 volt
Pellet box measuring 1230 x 600 x A hose length of 30 metres should not be power supply for the pellet supplier's vacuum
770 mm (length x width x height)
exceeded when lling the pellet store. If fan and an electrical isolator for the pellet
longer hose lengths are to be expected, boiler.
please consult with your pellet supplier to nd
out more about their technical options. Pellet box the small pellet storage
solution of choice
The pellet box is useful if there is not enough
space for a pellet store. It provides an
affordable and simple way to store pellets.
Storage and supply systems 34/35
Storage and supply to the pellet boiler via Pellet store and supply
a vacuum system to the pellet boiler via a
The vacuum system is deployed wherever vacuum system
the pellet store does not directly adjoin the
room where the pellet boiler is installed.
With the vacuum system, wood pellets can
be transported over a distance of up to
15 metres. The exible positioning of the
vacuum supply system enables installations
even in tight spaces. The vacuum system can
also be adapted to a room discharge screw
conveyor or a pellet silo. Pellet silo (fabric container)
and supply to the pellet
boiler via a vacuum system
Storage and supply to the pellet boiler via Pellet store and supply to
exible screw conveyor the pellet boiler via exible
If the pellet store or the pellet silo is situated screw conveyor
immediately adjacent to the boiler room, the
pellet boiler can be supplied via a exible
screw conveyor directly to the rotary lock
valve. Using this system means there is no
need for a pellet hopper at the boiler. The
drive unit for the exible screw conveyor is
installed directly at the boiler on the rotary
lock valve.
Pellet silo (fabric container)
and supply to the pellet
boiler via exible screw
conveyor
Pellet box for manual charging from Pellet box the exible and
pellet sacks compact pellet store
For manual charging from pellet sacks, the
pellet box can be positioned right next to the
Vitoligno300-C or, if preferred, anywhere
inside the room. A 260 kilogram load is
sufficient for up to ten days.
Vitoligno300-H
Vitoligno250-F
For woodchips
Solid room discharge
A bottom agitator with two leaf spring arms
lls a screw conveyor channel let into the
oor. The agitator and screw conveyor are
designed for robust operation and high torque.
This safeguards a trouble-free and reliable
woodchip discharge, no matter in what
form. The stable torque support protects
the gearbox against overloads and ensures
consistently smooth and quiet operation.
The integral control unit enables operation of the entire system with up to four heating
circuits for DHW heating and central heating backup.
Optionally, the Vitotrol350-C can be used Vitotrol350-C with 5" colour touchscreen as remote
control, control loop extension and cascade controller
not only as a remote controller, but also as a
cascade controller. Up to four wood boilers
can be cascaded (only Vitoligno300-C and
Vitoligno300-H). In addition, an oil/gas boiler
can be made available via the master boiler.
The main control loops of the cascade system
can be displayed and operated; the charging
level of the heating water buffer cylinder
is displayed. The remote controller or the
cascade controller can optionally be extended
to 20 additional control loops (heating circuits,
DHW heating or district heating supply pipes) Vitotrol350-C default display of cascade for up to four
via control modules. wood boilers with boiler information
During burnout, any heat not required for After burnout, the residual heat in the
heating purposes is channelled into the boiler water is fully utilised.
heating water buffer cylinder with precise Only then is heat supplied to the heating
temperature stratication. water buffer cylinder. The proven
control concept for heating convenience
discharges the heating water buffer
cylinder with precise temperature
stratication.
Service Trade partners
Attractive nance invest now and save Terms and conditions to shout about
on heating costs immediately If you invest now in a new heating system
Viessmann's nance model avoids red for your property, you may be eligible for an
tape. The fast and reliable process makes attractive nance package from Viessmann
modernisation projects easier, and keeps in conjunction with CreditPlus bank: just
nancial planning exible. The particular 3.99percent* effective APR.
advantage is that with Viessmann's favourable
terms, savings on heating costs are generally * Over 24 months
Please note:
Applications for subsidies and nance must
be made before the heating and/or solar
thermal system is purchased. Subsidies and
nance agreements cannot be arranged
retrospectively. Full details on the Viessmann
nance model are available from your local
trade partner.
The company
40/41
Viessmann is one of the world's leading the needs of today are met without
manufacturers of intelligent, convenient and compromising the quality of life of future
efficient systems for heating, cooling and generations.
decentralised power generation.
We consider climate protection, environmental
As a third generation family run business, responsibility and resource efficiency to be
Viessmann has been supplying highly efficient key priorities throughout our company, which
and clean heating systems for many decades. has more than 11,600 employees worldwide.
2009/2011/2013:
German Sustainability Award
A strong brand creates trust Example of Best Practice
for Production/Brand/Resource
Together with our brand label, our key brand With its strategic sustainability project,
Efficiency
message is an identifying feature throughout Viessmann demonstrates at its own head
the world. "Climate of innovation" is a promise office in Allendorf (Eder) that the energy and
on three levels: It is a commitment to a culture climate policy goals set for 2050 can in fact
of innovation. It is also a promise of enhanced be achieved today with commercially available
product benets and, at the same time, an technology. The results speak for themselves:
obligation to protect the environment.
Expansion of renewables to 60percent
Acting in a sustainable manner CO2 emissions reduced by 80percent
For Viessmann, taking responsibility signies
a commitment to acting sustainably. The long term goal is for the company to meet
all its own heating energy requirements by
This means harmonising ecology, economic sustainable means. Energy Efficiency Award 2010
Viessmann Group
Copyright Viessmann
Duplication and alternative use only with prior written consent.
Subject to technical modications.