Anda di halaman 1dari 8

The SMARTFIT Best-fitting Package

Application to Difficult GD&T Problems

Kotem Technologies Inc.


Ottawa, Ontario, Canada
www.kotem.com
Series of presentations: Application of the Smartfit package
www.kotem.com
The SMARTFIT helps with GD&T problems other
software cannot

DRF - fully constrained, possible mobility from MMR, LMR

www.kotem.com
The SMARTFIT Helps with GD&T Problems Other
Software Cannot Tolerance Envelope Criterion

DRF - fully constrained, possible mobility from MMR, LMR


14.0 (MMC) 14.0 (MMC)

Mobility!
Without MMR modifier on the datum this
part would be rejected!
64.0 (MMC) 64.0 (MMC)
www.kotem.com
The SMARTFIT Helps with GD&T Problems Other
Software Cannot Tolerance Envelope Criterion

Means this
Floating profile no real
datum in the plane

This is a floating profile. Not all of the software have good best-fitting
capability. If evaluated without best-fitting the bias in the results by half of
the tolerance zone is guarantied!

www.kotem.com
The SMARTFIT Helps with GD&T Problems Other
Software Cannot Tolerance Envelope Criterion

Datum Y is a compound datum comprising of 17 (!) holes. Very, very few


software can handle this callout properly! Use the SMARTFIT!

www.kotem.com
The SMARTFIT Helps with GD&T Problems Other
Software Cannot

Non-fully constrained DRF (datum Reference Frame)


MMC or LMC qualifier on datums causing mobility of
the DRF.
Complex profile tolerances with no datums.
Compound datums

The SMARTFIT gives you the tools to properly handle all these
cases according to ANSI Y14.5 and ISO 1101 GD&T standards!

www.kotem.com
GD&T Mathematical Libraries Available!

If you need similar capabilities in your


software package call us, we can help you
with our mathematical libraries!

www.kotem.com
The SMARTFIT Best-fitting Package

Kotem Technologies Inc.


1971 Marquis Ave.
Ottawa, Ontario, Canada K1J 8J5
Tel.: (613) 749-0200, Fax: (613) 749-9021
email: info@kotem.com
www.kotem.com

www.kotem.com

Anda mungkin juga menyukai