amazing 105 Qs of 150 for March 2014 computerized exam and claims Control F function was not
allowed Can you locate the Code Sections and REFERENCES ON ALL ANSWERS THIS MAKES FUN
PRACTICE Nice Job George
1,
2,
3,
4,
6, Characteristics of SAW
7,
8,
9,
11,
13,open book
15,
20, if you want to use A-283 instead of A-36 require purchaser written approval .
25,
26,
27,
28,
31,
33,
39,
42,
46, 1:4
47,
50,
52,
53,
54,
55,
56,
58,
59,
60,
61,
63,
66,
67,
68,
71,
72,
77, Given thickness is 3/8 and depth of pit .180 is it acceptable without repairs
78,
79,
83,
85, W.P.S question joint sketch given but did not mention the grove angle.
88, Critical length calculation Given tank dia, least thickness , average thickness,
remaining thickness and ask us calculate critical length.
91, Given corrosion rates for shell and bottom plates . ask us tell Maximum UT
inspection interval .
93,Given shell and bottom plate corrosion rate and ask find UT inspection interval
94,
Meaning of RCA
95 Keyword in the exam is experiences with coatings and linings OPEN BOOK
96, Key word is to the maximum liquid level , not shell height in the examination
they mentioned tanl height and liquid level and ask us which one we have to
consider for calculating thickness
97,
98,
98, Carbon Steel (Unknown Specification) thickness is .5 and temp -20F- safe
for use
104,
105,
106,