Powering Types of Screens 2. Standby Screens 3. Alert Screens Settings IntelliMutecontinued Voice or Tone Mode
radar/laser/camera detector. Your detector should be mounted on the windshield or dashboard of 1. Menu/Settings Screen Radar bands consist of X-band, K-band, Ka-band, and Ku-band. With Quad-level IntelliSheild False Signal Rejection: Highway Mode IntelliMute Engine RPM Activation Point Not Set. You can set your detector to sound alerts and confirm menu set-
Plug in your detector using the included Connected to phone. Radar signals, the signal strength meter shows signal strength of the provides full immediate response to all signals detected. Use this tings with either a Voice or a Tone Alert. Voice Alert provides voice
The Cobra SPX 7800BT works with your vehicle. Two mounting options are included: cigarette lighter adapter. User and Alert Settings are available for customizing your
No connection to phone. IntelliMute On/Above Set Engine RPM Activation Point.
radar gun as well as relative proximity to the source. With Ka-band, mode when you are driving on interstate highways. messages in addition to tones. Tone Alert provides tones only. The
iPod touch (5th Generation) Suction Cup Mount detector. When Menu is pressed, you will see the screen shown IntelliMute On/Below Set Engine RPM Activation Point. factory setting is Voice Alert.
Note: the adapter includes a USB port that you will also be notified of the actual Ka-band radar gun frequency Automatic door openers operate in X and K-band frequencies. To
iPod touch (4th Generation) This is the best option for portability and mov- below (Active mode icon will be enlarged/highlighted). being used. minimize unwanted false alerts in an urban environment where these Note: IntelliMute may not work with some vehicles,
iPhone 5 ing the detector from car to car. Make sure to can be used to charge your smartphone or
Suction Cup Mount sources exist, use one of the City Filtering Modes below: especially hybrids or EVs because the detector cannot sense Illumination
thoroughly clean the suction cups and wind- tablet using the manufacturers charging
iPhone 4S 12V Cigarette Lighter Adapter
Frequency
City X: automatically mutes X-band audible alert the engine RPMs. In such case, Quad-level IntelliShield City Filter- The display illumination intensity can be adjusted to suit driving
shield mounting area to insure a tight seal. cable. Signal Strength
iPhone 4 Level 1= until signal strength reaches level 3 or above. ing or Auto Mute can help reduce unwanted audible alerts. conditions with five levels and Dark Mode:
Android smartphones running OS 2.1 or higher Hook and Loop Fastener Turn your detector on/off by pressing the Weakest Signal IntelliMute Pro: IntelliMute Pro prevents detection by radar Factory default is Bright, then Display Timeout after 1 minute.
User Alert City X+K: combined with City X, automatically
Note: Pressing Mute button while connected to an iPhone/ Level 5=
Printed in China Part No. 480-890-P Version C
Included for dashboard mounting. Power/Volume switch on the side of the Settings Settings detector detectors (RDDs) such as VG-2, Spectre I and Spectre Dark to blank the screen for discreet use. In this mode, alerts
Controls and Hook & Loop Fastener Android smartphone will toggle between these two screens. Strongest Signal mutes K-band audible alert until signal strength
Windshield Bracket unit. The unit will light up. IV when traveling at slower speeds. It is intended for use by will sound but not show. (The display scanner bar will move
Connections Mounting Slot Your detector should be mounted so that it is oriented reaches level 2 or above.
Compass Heading: Automatically displays GPS-based heading Ka Band Alert experienced users only. slowly back and forth near the bottom of the screen to indicate
parallel to the road. 12V Power Jack City Plus X+K+Ka: combined with City X+K,
when connected to a smartphone*. If a GPS signal cannot be received When IntelliMute Pro is turned On and engine RPMs are below the unit is turned On).
SPX 7800BT User Settings Alert Settings adds filtering to Ka-band.
the IntelliMute Pro Activation Point, your detectors radar detec- You can adjust the illumination by pressing the Dim button and then
For customizing settings for: For customizing settings for: through your smartphone, will be displayed. With Laser signals, you will always receive full alert and pulse rate City MAX: Maximum filtering against urban
Maximum Performance Power/Volume
12V Power Jack Windshield
(PPS) of the corresponding laser gun being used. tion circuits are turned Off to prevent detection by RDDs. use the and buttons to step through the levels.
Radar/Laser/Camera Detector Control City/Highway Filtering X-Band Vehicle Speed: Automatically displays your current vehicle speed false signal sources.
Press to turn power
Menu/Save Button
using your smartphone GPS. If a GPS signal cannot be received IntelliMute Pro cannot be turned on until IntelliMute is turned
The City modes can also be adjusted by pressing the City button
Operating Instructions IntelliMute/IntelliMute Pro K-Band
Press once to enter
On and Off. Menu Mode. Correct Position Incorrect Positions through your smartphone, will be displayed. on and set. The IntelliMute Pro icon will appear in the display Dim/ Button
Push forward Press again to save
for 2 seconds. when IntelliMute Pro is On and the Activation Point has been set.
or pull back to The suction cup mount comes standard bent at Auto Mute Ka-Band Laser
adjust volume.
settings. USB Port City/Highway Indicator: Shows curent filtering mode. Whenever engine RPMs are below the Activation Point, the arrow
NOTE: This device complies with part 15 of FCC rules: Operation is subject to the following
a 45 angle. The metal is designed to bend IntelliMute: IntelliMute allows you to avoid audible alerts you
two conditions: (1) This device may not cause harmful interference, and (2) This device must
City/ Button Tone/Voice Ku-Band points down with the i blinking. When RPMs are above the Customizable Display Colors
accept any interference received including interference that may cause undesired operation. Dim/ Button without breaking. Adjust the angle so when Vehicle Battery Voltage: Displays your car battery voltage and dont need to hear because you are stopped or moving slowly. By
CAUTION: Modifications or parts not approved by Cobra Electronics Corporation may Switches between Activation Point the arrow points up with the i blinking. Your detector includes the Color Theme feature that allows you to
Adjusts the display Highway and City mounted the detector is level with the road. Color Theme POP Detection automatically warns you if this drops below 11.9V. sensing the RPMs of your engine, IntelliMute knows when you are
violate FCC Rules and void authority to operate this equipment.
brightness. customize the display screen color scheme to match your cars dash
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is filtering modes.
Pulse at low speed and automatically mutes alerts. You can set your pre- Auto Mute Mode
subject to the following two conditions: (1) this device may not cause interference, and (2)
In Menu mode, In Menu mode, steps Avoid blocking the detectors view by windshield wiper Display Timer VG-2 RDD IntelliMute Indicator: illumination: Multi-Color, Red, Blue, Orange, White or Green.
steps backward forward through Rate ferred engine RPM activation point and/or turn on/off IntelliMute by When Auto Mute is On, the audio volume of all alerts is automati-
this device must accept any interference, including interference that may cause undesired
through available blades or dark tinting at the top of the windshield. Smart Power Spectre RDD Indicates status of IntelliMute. *Works with iPhone and Android The factory setting is Multi-Color.
operation of the device. settings selection. following simple steps that appear on your unit screen, under User cally reduced after 4 seconds. The signals will remain muted for as
Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils
settings selection. Mute/Set Button See IntelliMute section smartphones. Internet connection
Press once to manually Note: Do not attempt to bend the mount while the detector Power/Volume Control
Factory Default Safety Alert Settings and then IntelliMute. long as the signal is detected. When Auto Mute is Off, the alerts will
radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) for details. and data plan usage required.
lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout mute audio alerts.
is attached. sound at full volume for as long as the signal is detected. The factory
brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le
fonctionnement.
In Menu mode, press to Low Car Voltage setting for Auto Mute is On.
save selected settings.