0 penilaian0% menganggap dokumen ini bermanfaat (0 suara)
105 tayangan2 halaman
1) The document contains 5 multiple choice questions about electrical transmission lines.
2) The questions cover topics like load angle calculation, reflection due to characteristic impedance termination, voltage differences under no load conditions, and using ABCD parameters to calculate receiving end voltage.
3) The questions have single correct multiple choice answers ranging from letters a-d.
1) The document contains 5 multiple choice questions about electrical transmission lines.
2) The questions cover topics like load angle calculation, reflection due to characteristic impedance termination, voltage differences under no load conditions, and using ABCD parameters to calculate receiving end voltage.
3) The questions have single correct multiple choice answers ranging from letters a-d.
1) The document contains 5 multiple choice questions about electrical transmission lines.
2) The questions cover topics like load angle calculation, reflection due to characteristic impedance termination, voltage differences under no load conditions, and using ABCD parameters to calculate receiving end voltage.
3) The questions have single correct multiple choice answers ranging from letters a-d.
1. A transmission line has a reactance of 1 Pu is operating at Vs = Vr = 1 Pu.
The generator is connected at source end which is delivering 0.5 Pu of active power. Find the load angle? a) 35 b) 30 c) 45 d) 60
2. In a transmission line terminated by characteristic impedance, Zo
(A) There is no reflection of the incident wave. (B) The reflection is maximum due to termination. (C) The reflection and refraction of incident wave are equal. (D) The incident current is zero for any input. Ans: A 3. What happens in a long transmission lines under no load? a. The receiving end voltage is less than the sending end voltage. b. The sending end voltage is less then receiving end voltage. c. The sending end voltage is equal to receiving end voltage. d. None of these. Ans: b 4. A = D = 0.9 0 , B = 200 90 , and C = 0.95 *10-3 90 . At no load condition a shunt inductive reactor is connected at the receiving end of the line to limit the receiving end voltage to be equal to the sending end voltage. What is the ohmic value of the reactor? a) Infinity. b) 2000 c) 105.26 d) 1052.6 ANSWER: b. 2000 5. The ABCD parameter of a 3 phase transmission line is given as follows A = D = 0.8 1 , B = 170 85 , and C = 0.002 90.4 the sending end voltage is 400 kV. What is the receiving end voltage under no load condition? a. 400 kV b. 500 kV c. 320 kV d. 417 kV ANSWER: b. 500 kV