Passive harmonic filters help to obtain compliance with international Power Quality
standards like e.g. IEEE 519-1992 or EN 61000-3-12.
The non linear Loads generate Harmonics distortion. Our Passive Harmonic Filters
are ideal for Commercial and Industrial applications. The equipments like UPS,
Computers, Printers, LED/CFL/PL Lamps, AC drive - Motors, Pumps , Lifts, Crane,
Compressors, HVAC, Chillers , Compressors and many other Electronic loads
produce more current Harmonics distortion. Our Passive Harmonic Filters
mitigating all the Harmonics issues and maintain IEEE-519 standards. Even if
Harmonics generating sources of your 3 /1Phase Load is single or multiple
Locations, it is possible that Harmonics can be supressed at particular location only.
It will not spread to all other circuit. This static device consist of series inductive /
parallel inductive, resistive, capacitive (RLC) network tuned to individual harmonics
for a 50Hz fundamental frequency and required no maintenance. Life is 15 years.
The higher the harmonic components , larger the waveform distortions. This larger
deviations from the sinusoidal fundamental frequency are integer multiples of the
fundamental frequency. For example on 50Hz supply, the 3rd harmonic is 3 x 50Hz
(150Hz) the 5th harmonic is 5 x 50Hz (=250Hz) and so forth.
2) TPN -Suitable for single Phase and three Phase Load 3Ph,4 wire 415+/-10%,50 Hz.
- Suitable for any type of Load. All different types of odd and even current Harmonics
need to be reduced to defined limit.
- Suitable for 3 rd, 5 th, 7 th and Higher Harmonics
INCOMING
SUPPLY
BNN NON LINEAR
PUREGREEN LOAD
MAINS LOAD
INPUT FILTER OUTPUT FILTER
FREQUENCY TUNING
MATCHING CAPACITORS
MAINS LOAD
BALANCING INPUT OUTPUT OUTPUT
FILTER FILTER FILTER-1 FILTER-2
TUNING
CAPACITORS
FREQUENCY TUNING
MATCHING CAPACITORS
Advantages
Applications