2) If multiple delay corners are being analyzed then each cell needs to be
characterized
for each corner
Check timing constraint file (SDC)
What is the error if one cell missing LEF and present in netlist
EX: MX2X1
Warning : MX2X1 has no physical library or has wrong dimension values
Related Instance has no physical library or has wrong dimension value.
What is the error if one cell missing (.lib) and present in netlist
Ex MX2X1
ERROR: cell MX2X1 is not defined in all timing analysis view.
The cell should be defined in all analysis views.
ERROR: some cells are missing from each of the timing analysis views. Please
check the library finding of instances in active views using the command
check_instance_library_in_views and set the missing in corresponding views
LibraryMisMatchError
What is the error if create_clock is not defined in SDC?
No constrained timing path found.
Design may not be constrained or library is missing timing information.
** I was found this error in report _timing
What is the error if footprint is not defined in .lib?
no warning or no error is displayed.
What is the error if a PIN miss in LEF?
Combinational cell: no pin placement (** but pin is at orientation)
Sequential cell: pin is getting placed but no connectivity is being established.
*******observed in routing stage
*Why we dont have assign statements in netlist
In hierarchy if we want to connect from one output of the cell to input of another
cell we need a assign statement
In flat design we directly connect from on cell to another cell