Anda di halaman 1dari 2

Product Data Sheet Mobil Rarus SHC 1020 Series

High Performance Synthetic Air Compressor


and Turbo Charger Lubricants

Product Description

Mobil Rarus SHC 1020 Series high performance lubricants are primarily intended for use in rotary, screw and
vane air compressors, particularly those in severe service with high final compression temperatures and where
extended drain periods are desired.

They are formulated from wax-free synthetic hydrocarbon fluids which have outstanding resistance to oxidation
and thermal degradation far superior to mineral oil-based air compressor oils. The combination of a high
viscosity index and a unique additive system enables these products to operate over a wide temperature range
without coking or deposit formation. Their low volatility increases their operational safety by reducing the risk of
fire or explosion. They have good water tolerance and air release properties and provide good protection
against corrosion.

Mobil Rarus SHC 1020 Series products are not intended for air compressors for breathing applications.

Mobil Rarus SHC 1020 Series products are formulated using an olefin oligomer, synthesised from special
olefins by a controlled Mobil patented polymerisation process. This produces fluids with known consistent
characteristics which have a chemical and thermal stability far in excess of those attributable to oils made by
conventional refining methods. This ensures minimum formation of deposits and increased operational safety.

They also have very low volatility, reducing vaporisation losses which are often prevalent in oil flooded
compressors where the lubricant is finely distributed in the air at high temperatures. They also have good air
release properties allowing entrained air to separate readily at the fluid surface.

Mobil Rarus SHC 1020 Series products have excellent hydrolytic stability to protect against deposits in those
applications where water contamination can occur at low temperatures.

Benefits

Mobil Rarus SHC 1020 Series products offer the following benefits:

Outstanding oxidation and chemical stability, exceeding that of all mineral oil based compressor oils,
giving longer oil life
Compatible with all seals, gaskets and materials normally associated with conventional mineral oil type
lubricants
Low volatility and ready air separation reduce oil carry over and decrease oil consumption
Low Pour Point and high Viscosity Index provide very wide application temperature range
Excellent hydrolytic stability
Minimal tendency to form carbonaceous deposits and residues in high temperature compressor exhaust
areas reduces maintenance and increases operational efficiency
Good anti-wear characteristics reduce mechanical wear in vane and screw type machines
Reduced fire and explosion risks in inter-cooler and after cooler due to reduced oil carry over
Increased inter-cooler and after cooler efficiency due to reduced carbon deposits which impair heat
transfer

9078(11/2001)
Application

Mobil Rarus SHC 1020 Series products are premium quality lubricants for modern compact design, high
severity rotary air compressors - both rotary vane and oil flooded screw machines.

They provide many advantages over mineral oil and dibasic ester type products. In oil flooded screw
compressors where the oil is intimately mixed with the air and subjected to intense high temperature oxidising
influences, the very high level of resistance to oxidation and their superior anti-wear properties make Mobil
Rarus SHC 1020 Oils ideally suitable.

Turbochargers - Mobil Rarus SHC 1026 is the preferred lubricant for maximum service and minimum deposits
in high temperature turbocharger bearings. It is approved by ABB Turbo Systems for oil change intervals of 5
times that permitted with any mineral lubricant.

Health and Safety

Based on available toxicological information, it has been determined that these products pose no significant
health risk when used and handled properly.
Details on handling, as well as health and safety information, can be found in the Material Safety Data Bulletin
which can be obtained through Mobil Oil Company Ltd., by telephoning 01372 22 2000.

Typical physical characteristics are given in the table. These are intended as a guide to industry and are not
necessarily manufacturing or marketing specifications.

Typical Characteristics

Mobil Rarus SHC 1024 1025 1026

ISO Viscosity Grade 32 46 68


Viscosity, cSt at 40C 30 42 67
Viscosity, cSt at 100C 5.7 7.2 10.1
Viscosity Index 127 130 136
Pour Point, C, max. -54 -54 -54
Flash Point, C, min. 240 235 240

Due to continual product research and development, the information contained herein is subject to change without notice.

Mobil Oil Company Limited


Acting as Agent for Mobil Lubricants UK Limited
ExxonMobil House, Ermyn Way
Leatherhead, Surrey, KT22 8UX
Telephone: 01372 22 2000

9078(11/2001)

Anda mungkin juga menyukai