------------------------------------------------------------------------------------------------------------------------------------------
A) Overhead system B) Underground system C) Both (a) and (b) D) None of the above
4) The volume of copper required for and ac transmission line is inversely proportional to __
5) Improving pf_____
A) 3phses, 3 wire B) 3phse, 4wire C) single phase, 3 wire D) single phase, and 2wire.
7) The main reason for using high voltage for long distance power transmission is _______
A) Wooden poles B) Steel poles C) RCC poles D) Both (b) and (C)
A) Copper conductors B) All aluminum conductors C) ACSR conductors D) None of the above
A) Higher current carrying capacity B) being lighter in weight C) economy D) higher tensile
strength.
16) The material used for the manufacture of ground wire is _______
17) Which of the following materials is not used for transmission and distribution of electrical power?
A) Increase the sag and decrease the tension B) decrease the sag and increase the tension
C) Increase both D) Decreases both
A) Less than that I winter B) More than that in winter C) Same as in winter D) none of the above
23) Between two supports, due to sag the conductor takes the form of ____
A) Weight of the conductor B) transmission losses C) Resistance tor flow of current D) Skin effect
25) The minimum clearance between 132 Kv transmission line and ground is about _____
26) For a 400Kv line, the spacing between phase conductors is around _____
27) Which of the following materials is not a constituent of material used in making porcelain insulators?
28) Pin type insulators are generally not used for voltages exceeding_______
30) Which type of insulators are used on 132 kV transmission lines ________
A) Pin type B) disc type C) shackle type D) Pin and shackle type
A) Maximum across the lowest disc B) Maximum across the topmost disc
A) using long cross arms B) using a guard ring C) grading the insulators D) Any of the above
A) The distance between the conductors is reduced B) The conductor diameter is reduced
A) Reduce line loss B) Reduce skin effect C) Balance line voltage drop D) Reduce corona
A) Is more pronounced for large conductors high frequencies and close proximity
B) Increased the resistance of the conductors and reduces the self reactance
1 B 25 A
2 A 26 A
3 B 27 C
4 D 28 B
5 A 29 C
6 C 30 B
7 A 31 A
8 C 32 B
9 C 33 C
10 B 34 D
11 D 35 D
12 C 36 G
13 C 37 C
14 B 38 C
15 C 39 A
16 B 40 D
17 A
18 B
19 C
20 A
21 B
22 D
23 B
24 A