Anda di halaman 1dari 2

Protection and Control IED Manager 1MRS756450

PCM600 Issued: 11.12.2007


Version: P/30.6.2016

INSTALLATION GUIDE
Related items
PCM600 Ver. 2.8 Installation DVD

PCM600 Ver. 2.8 Setup can be downloaded from https://www143.abb.com/SoftwareLibrary

Content on DVD
PCM600 Setup
PCM600 Ver. 2.8 Readme file
PCM600 Ver. 2.8 Installation Guide
PCM600 Ver. 2.8 Product Guide

PCM600 Setup includes the following software:


Protection and Control IED Manager PCM600 Ver. 2.8
Generic IEC 61850 IED Connectivity Package Ver. 2.5
Adobe Reader DC
Wavewin Tool for Disturbance Analysis

System requirements PCM600 requires Microsoft SQL Server 2014


Express edition. The correct SQL Server instance
Operating system: Windows Vista SP2, Windows
will be installed automatically. If the correct SQL
7, Windows 8/8.1, Windows 10 (see note about
Server instance is already installed, the PCM600
Windows 10), Windows Server 2008 R2, Windows
installation will skip this step. The SQL Server
Server 2012 R2
requires Windows Installer 4.5, .NET Framework
3.5 SP1 and .NET 4.0 or higher that will also be
Windows must be up-to-date in order to support
installed when required. Windows Installer and the
the required runtimes and software components
.NET Frameworks might require a reboot.
required by PCM600. It is recommended to run
Windows update before installing PCM600.
When installing PCM600 on Windows 8 and later,
Hardware requirements, a network connection is mandatory. The reason for
minimum/recommended: this is that .NET 3.5 SP1 is only available from
Windows Update in Windows 8 and later.
Physical RAM memory: 2 GB / 4 GB
Free hard disk space: 4 GB / 8 GB Installing a Windows language pack in Windows 8
Processor: 1.5 GHz / 2.4 GHz or 8.1 before installing the .NET Framework 3.5
will cause the .NET Framework 3.5 installation to
Windows compatible pointer (e.g. mouse) fail. Install the .NET Framework 3.5 before
installing any Windows language packs.
How to install PCM600 Ver. 2.8
a) DVD Installation: Installation requires administrator rights. In all
Insert the installation DVD into the DVD-drive. If versions of Windows it might be necessary to
the setup doesnt start automatically, execute switch off or configure antivirus software to not
setup.exe in the root folder of the installation DVD. block the installation and operation of PCM600
(e.g. McAfee Host Intrusion Prevention).
b) Downloaded from ABB Software Library:
After free registration, you will get an email with a Windows 10
link to download the executable installation. Start When upgrading from an earlier Windows version
the installation and follow the instructions. to Windows 10 with PCM600 already installed, an
additional reboot might be required to start all
After the installation starts, select the needed soft- needed services.
ware components and follow the instructions to
complete the installation.

1
Protection and Control IED Manager 1MRS756450
PCM600 Issued: 11.12.2007
Version: P/30.6.2016

Prerequisites for using PCM600 Ver. 2.8 can be done by using lusrmgr.msc (Local Users
and Groups (Local)). This function provides a
To operate with PCM600, there must be at least
possibility to add both local and network user
one IED Connectivity Package installed and
accounts to PCMSERVER2014 Users Group.
selected to be used with PCM600 Ver. 2.8.
SQL Server 2014 Express
License
PCM600 2.8 is using Microsoft SQL Server 2014
There is no license required for PCM600 Ver. 2.8.
Express. This instance is separate from and
doesnt interfere with the SQL instance in PCM600
IEC 61850 communication configuration
2.7 and older versions that use SQL Server 2008
Express. The two instances can co-exist.
Separate IEC 61850 communication configuration
software can be purchased through ABB sales
SQL Server 2016 and later versions
representatives.
PCM600 is not compatible with SQL Server 2016
Previous versions of PCM600 or later versions of the SQL Server. PCM600 SQL
Server 2014 instance should not be upgraded to
PCM600 2.8 can be installed in parallel with a
SQL Server 2016 or later.
previous version. If you only want to use PCM600
2.8, you should uninstall the previous version of
PCM600 before installing PCM600 2.8. It is
recommended to install PCM600 versions in Disclaimer
ascending order. E.g. PCM600 2.5 cannot be
The information in this document is subject to change without
installed on top of PCM600 2.8. notice and should not be construed as a commitment by ABB
Oy. ABB Oy assumes no responsibility for any errors that may
If PCM600 2.5 or an older version is uninstalled appear in this document.
after PCM600 2.8 has been installed, PCM600 2.8 Copyright 2016 ABB Oy
will be broken and must be repaired. This can be
done through Control Panel and Add and Remove All rights reserved.
Programs (Uninstall a Program in Windows 7).
Trademarks

When opening projects in PCM600 2.8 that have ABB is a registered trademark of ABB Group. All other brand or
product names mentioned in this document may be trademarks
been created with previous versions of PCM600, or registered trademarks of their respective holders.
the projects will be converted automatically. After
project conversion, the projects can't be opened
with older PCM600 versions anymore.

In order to migrate IED 670 configuration from


PCM600 Ver. 1.5 to 2.8 (the whole PCM600
project including all IEDs in the project), please
refer to the document 1MRG002586 -
Configuration Migration for 670 series in PCM600
User Manual", that can be found on the 670 series
ConnPack DVD.

SQL Server access rights


PCM600 2.8 data security has been enhanced,
and for that reason every Windows user using
PCM600 must be given privileges to PCM600
project data. These privileges are given by adding
the Windows user to new PCMSERVER2014
Users user group.

During installation, the user logged in is


automatically added to PCMSERVER2014
Users group. If additional users are required, they
have to be added to the user group manually. This

Anda mungkin juga menyukai