Review of 5S Technique
1
Prof. Saad Shaikh, 2Ansari Noor Alam, 3Khan Naseem Ahmed, 4Sawant Ishtiyak, 5Sayyed Ziaul Hasan
Abstract There are certain fields which are very workplace. Its result is the effective organization
demanding in today's trend. Small Scale Industry is one of workplace, elimination of losses connected with
of the field. It plays an important role in Indian country. failures and breakdowns in machines, improvement
It has emerged as powerful source in providing of the quality and safety of work[3-5]. The
relatively larger employment after agriculture. It implementation of 5S is crucial as it serves as
contributes more than 50% of the industrial production stepping stones to create a strong housekeeping culture
in vast field of engineering .Global markets are in the organization[2].
continuously changing and demanding due to high
quality and low cost. Such products can be produced The history and philosophy of the 5S has its roots
using lean manufacturing , by this we aimed to reduce in Japan. Name 5S is the acronym of five Japanese words of
all types of wastes at product manufacturing so as to the following meanings:
reduce product cost. 5S is a basic lean manufacturing 1. Seiri (sort),
technique for cleaning, sorting, organizing and 2. Seiton (set in order),
providing necessary improvement in work place. This 3. Seiso (shine),
system helps to organize a workplace for efficiency and 4. Seiketsu (standardize),
decrease waste and optimize quality and productivity via 5. Shitsuke (sustain).
monitoring an organized environment[1]. 5S offers
good results for required improvement. This method can
be used in all companies , by this we can get good
improvement in the production process of company.
Consequently, 5S techniques would strongly support the
objectives of organization to achieve continuous
improvement and higher performance.[1]`
I. INTRODUCTION
927
ISSN: 2278 7798 All Rights Reserved 2015 IJSETR
International Journal of Science, Engineering and Technology Research (IJSETR)
Volume 4, Issue 4, April 2015
928
ISSN: 2278 7798 All Rights Reserved 2015 IJSETR
International Journal of Science, Engineering and Technology Research (IJSETR)
Volume 4, Issue 4, April 2015
Benefits of Seiton:
*Increases the efficiency of the production.
*Effectiveness increases.
*Time required for seeking the items are reduced.
*Improves the safety.
929
ISSN: 2278 7798 All Rights Reserved 2015 IJSETR
International Journal of Science, Engineering and Technology Research (IJSETR)
Volume 4, Issue 4, April 2015
IV CONCLUSION
By studying the 5S methodology we conclude that this
technique is very useful and beneficial in Industrial
organization[1]. We also concluded that by implementing
5S we could improve the quality, productivity and
efficiency of industrial organization, it also has positive
effect on overall performance.[1]
REFERENCES
[1] Arash Ghodrati, Norzima Zulkifli , " The Impact of 5S Implementation
on Industrial Organizations Performance ", International Journal of
Figure 6. Standardize[23] Business and Management Invention(ISSN), Volume 2 Issue 3, PP.43-49,
March 2013.
[2] Aziz Wan Asri Wan Abdul, Mat Azman Che, The Effectivene- ss of
E-SHITSUKE Sustain Implementation of 5S on Employee Motivation , Business and Social
The final stage is 5S Shitsuke or sustain, ensuring that the Sciences Review (BSSR), Vol. 1, No. 1, pp. 41-51,2011.
company continue to continually improve using the [3]Osada T. The 5S: Five Keys to a Total Quality Environment, Asian
Productivity Organisation, Tokyo.1991
previous stages of 5S, maintain housekeeping, and conduct
audits and so forth[23]. 5S should become part of the
930
ISSN: 2278 7798 All Rights Reserved 2015 IJSETR
International Journal of Science, Engineering and Technology Research (IJSETR)
Volume 4, Issue 4, April 2015
[4] Nilipour Akbar, Jamshidian Mehdi, 5S As an Environmental [15] Kumar and Kumar. Steps for Implementation of 5S,
Organization Management Tool; Benefits and Barriers, 3rd International International Journal of management. IT and Engineering, vol. 2, no.6,
Management Conference, pp.1-10,2005. pp. 402-416, 2012.
[5] Wazed M.A., Ahmed Shamsuddin, Theory Driven Real Time [16] Gheorghe Dulhai. The 5S strategy for continuous improvement of
Empirical Investigation on Joint Implementation of PDCA and 5S for the manufacturing process in auto car exhausts, Management and
Performance Improvement in Plastic Moulding Industry, Australian marketing, vol. 3, no. 4, pp. 115-120, 2008.
Journal of Basic and Applied Sciences, 3(4): pp. 3825-3835, 2009. [17] Khedkar at el. Study of implementing 5S techniques in Plastic
[6] R. A. Pasale, Prof. J. S. Bagi," 5S Strategy for Productivity Moulding International Journal of modern engineering research, vol. 2,
Improvement: A Case Study", Indian Journal Of Research, Volume : 2, no 5, pp. 3653-3656, 2012.
Issue : 3, Issn-2250-1991, 2013. [18] Prashant Koli. General Implementation and Calculation of 5S
[7] P. M. Rojarsra, M. N. Qureshi, " Performance Improvement through Activity in any Organization International journal of Science and
5S in Small Scale Industry: A Case study ", International Journal of Research, vol.1 no.3, pp.229-232, 2012.
Modern Engineering Research (IJMER), Vol. 3, Issue 3, pp-1654-1660, [19]WALKER, T. Creating total quality improvement that lasts,
2013. National Productivity Review, 114, 473-478 p, 2008 .
[8] Chauhan et al., Measuring the status of Lean manufacturing using [20]ANSARI, S. L., BELL, J., Target Costing: The Next Frontier in
AHP International journal of Emerging technology, vol.1 no.2, pp.115- Strategic Cost Management, Irwin Professional Publishing, Chicago, IL,
120, 2010. USA., 1997
[9] Miller et al., A case study of Lean, sustainable Manufactu-ring [21] BOCA,G., 5S in practice, XXIV Micro CAD, International Scientific
journal of Industrial Engineering and Management, vol.3 no.1, pp.11- Conference, University of Miskolc, 29-34 p., ISBN: 978-963-661-916-3,
32, 2010. 2010.
[10] Girish Sethi and Prosanto Pal, Energy Efficiency in Small Scale [22] BLACK, S., PORTER, L., Identification of the critical factors of
Industries An Indian Perspective Tata Energy research Institute. TQM, Decision Sciences, Vol.27, N0 1,1-21 p, 1996.
[11] Chakraborty et al. Internal obstacles to quality for small scale [23] http://leanmanufacturingtools.org/192/what-is-5s-seiri-seiton-seiso-
enterprises, International Journal of Exclusive managem- ent research, seiketsu-shitsuke/.
vol. 1, no. 1, pp. 1-9,2011. [24]http://www.scmep.org/5s-system-workplace-organization/.
[12] Upadhye et al. Lean manufacturing system for medium size
manufacturing enterprise: An Indian case , International journal of
management science and engineering management, Vol.5, no. 5, pp. 362-
375,2010.
[13] Hudli and Imandar, Areas of Lean manufacturing for
productivity improvement in a manufacturing unity, world academy
of science, engineering and technology, vol. 69 ,2010. 1
Faculty of Mechanical Engineering, Anjuman-I-Islam Kalsekar Technical
[14] Lukas et al. Lean implementation in a low volume manufac turing Campus School of Engineering, Panvel, Mumbai University,
environment: A case study Proceedings Industrial Engineering Maharashtra(India).
Research Conference, 2010. 2, 3, 4, 5
B.E.Mech.(Students), Anjuman-I-Islam Kalsekar Technical Campus
School of Engineering, Panvel, Mumbai University, Maharashtra(India).
931
ISSN: 2278 7798 All Rights Reserved 2015 IJSETR