Supplement to ISOfocus
February 2017
International Standards in process
ISO/DTR Measurement of fluid flow by means of
15377 pressure-differential devices Guidelines for
the specification of orifice plates, nozzles and
An International Standard is the result of an agreement between
Venturi tubes beyond the scope of ISO 5167
the member bodies of ISO. A first important step towards an Interna-
tional Standard takes the form of a committee draft (CD) - this is cir- TC 34 Food products
culated for study within an ISO technical committee. When consensus
ISO/CD 20667 Milk Determination of acetone content by
has been reached within the technical committee, the document is
continuous flow analyzer
sent to the Central Secretariat for processing as a draft International
Standard (DIS). The DIS requires approval by at least 75 % of the ISO/CD 20668 Milk Determination of beta-hydroxybutyric
member bodies casting a vote. A confirmation vote is subsequently acid content by continuous flow analyzer
carried out on a final draft International Standard (FDIS), the approval
TC 38 Textiles
criteria remaining the same.
ISO/CD 20852 Textiles Determination of the total heat
transfer through textiles in simulated
environments
TC 42 Photography
ISO/DTR Imaging materials Pictorial color reflection
18945 prints Comparison of image degradation
observed between ISO 18930 accelerated
CD registered TC 43
weathering test method and outdoor exposure
Acoustics
ISO/CD Acoustics Screens furniture and single ob-
20189-1 jects intended for interior use Part 1: Rating
Period from 01 January to 31 January 2017 of sound absorption and sound reduction of
These documents are currently under consideration in the technical elements based on laboratory measurements
committee.
TC 61 Plastics
They have been registred at the Central Secretariat.
ISO/CD 6721-1 Plastics Determination of dynamic mechani-
cal properties Part 1: General principles
TC 10 Technical product documentation ISO/CD 6721-2 Plastics Determination of dynamic mechani-
ISO/CD Technical product documentation (TPD) cal properties Part 2: Torsion-pendulum
20719-1 Technical product data set and presentation method
of 3D annotated models Part 1: General ISO/CD 6721-4 Plastics Determination of dynamic mechani-
principles and terms cal properties Part 4: Tensile vibration
Non-resonance method
TC 17 Steel
ISO/CD 6721-5 Plastics Determination of dynamic mechani-
ISO/CD 5948 Railway rolling stock material Ultrasonic ac-
cal properties Part 5: Flexural vibration
ceptance testing
Non-resonance method
TC 20 Aircraft and space vehicles ISO/CD 6721-6 Plastics Determination of dynamic mechani-
ISO/CD 9206 Aerospace series Constant displacement cal properties Part 6: Shear vibration
hydraulic motors General specifications Non-resonance method
ISO/CD 23041 Space systems Unmanned spacecraft op- ISO/CD 6721-7 Plastics Determination of dynamic mechani-
erational procedures Documentation cal properties Part 7: Torsional vibration
Non-resonance method
TC 22 Road vehicles
ISO/CD 20934 Fuse-links with axial terminals for use in 48V TC 76 Transfusion, infusion and injection, and
networks Type SFxx-48V blood processing equipment for medi-
cal and pharmaceutical use
TC 23 Tractors and machinery for agriculture
and forestry ISO/CD Prefilled syringes Part 6: Plastic barrels
11040-6 for injectables and sterilized subassembled
ISO/CD 21191 Equipment for Crop Protection Closed syringes ready for filling
Chemical Transfer Systems (CTS) Perfor-
mance Specification TC 85 Nuclear energy, nuclear technologies,
and radiological protection
ISO/CD 7714 Agricultural irrigation equipment Volumet-
ric valves General requirements and test ISO/CD 20046 Radiological protection - Performance criteria
methods for laboratories using fluorescence in Situ
Hybridization (FISH) translocation assay for as-
ISO/CD 9644 Agricultural irrigation equipment Pressure sessment of overexposure to ionizing radiation
losses in irrigation valves Test method
ISO/CD In-service inspections for primary coolant cir-
ISO/CD 9912-4 Agricultural irrigation equipment Filters for 20890-1 cuit components of light water reactors Part
microirrigation Part 4: Granulated media 1: Mechaniyed ultrasonic testing
filters
ISO/CD In-service inspections for primary coolant
TC 30 Measurement of fluid flow in closed 20890-2 circuit components of light water reactors
conduits Part 2: Magnetic particle testing and penetrant
ISO/DTR 3313 Measurement of fluid flow in closed conduits testing
Guidelines on the effects of flow pulsations ISO/CD In-service inspections for primary coolant cir-
on flow-measurement instruments 20890-3 cuit components of light water reactors Part
3: Hydrostatic testing
ISO/CD 1070 Liquid flow measurement in open channels TC 192 Gas turbines
Slope-area method ISO/CD 10494 Gas turbines and gas turbine sets Measure-
TC 126 Tobacco and tobacco products ment of emitted airborne noise Engineering/
survey method
ISO/CD 21160 Cigarettes Determination of selected car-
bonyls in the mainstream smoke of cigarettes TC 193 Natural gas
Method using High Performance Liquid ISO/CD 20676 Natural gas Upstream area Determination
Chromatography of hydrogen sulfide content by laser absorption
ISO/CD 21330 Cigarettes Determination of selected volatile spectroscopy
organic compounds in the mainstream smoke TC 198 Sterilization of health care products
of cigarettes Method using GC-MS
ISO/DTS Guidance on aspects of a risk-based approach
TC 130 Graphic technology 19930 to assuring sterility of terminally-sterilized,
ISO/CD 19302 Graphic technology Colour conformity as- single-use health care products
sessment of printed products TC 202 Microbeam analysis
ISO/CD Graphic technology File format for quality ISO/CD 20720 Microbeam analysis - Methods of the specimen
20616-2 control and metadata Part 2: Print quality preparation for analysis of general powders
exchange (PQX) using WDS and EDS
TC 131 Fluid power systems TC 204 Intelligent transport systems
ISO 19973- Pneumatic fluid power Assessment of com- ISO/CD 19414 Intelligent transport systems Service archi-
2:2015/CD ponent reliability by testing Part 2: Direc- tecture of probe vehicle systems
Amd 1 tional control valves Amendment 1
ISO/CD 20035 Intelligent transport systems Cooperative
ISO/CD 10763 Hydraulic fluid power Plain-end, seamless adaptive cruise control (CACC) Operation,
and welded precision steel tubes Dimen- performance and verification requirements
sions and nominal working pressures
ISO/DTR Intelligent transport systems Framework for
ISO/CD 2942 Hydraulic fluid power Filter elements Veri- 20529-1 green ITS (G-ITS) standards Part 1: General
fication of fabrication integrity and determina- information and use cases definition
tion of the first bubble point
TC 215 Health informatics
TC 134 Fertilizers and soil conditioners
ISO/CD 13120 Health informatics Syntax to represent the
ISO/CD 20977 Determination of size distribution by dry and content of healthcare classification systems
wet sieving Classification Markup Language (ClaML)
TC 146 Air quality ISO/DTS Health Informatics Terminology resource
ISO/CD Interior air of road vehicles Part 8: Handling 21564 map quality measures (MapQual)
12219-8 and packaging of materials and components TC 228 Tourism and related services
for emissions testing
ISO/CD 20611 Adventure tourism Sustainability good prac-
TC 147 Water quality tices Requirements and recommendations
ISO/CD Water quality Determination of cyclic volatile ISO/CD 21426 Tourism and related services Medical spa
20596-2 methylsiloxanes in water Part 2: Method Service requirements
using liquid-liquid extraction with gas chroma-
tography-mass spectrometry (GC-MS) TC 282 Water reuse
TC 161 Controls and protective devices for gas ISO/CD 20670 Water reuse Terminology
and/or oil TC 292 Security and resilience
ISO/CD Safety and control devices for gas burners and ISO/CD 22320 Security and resilience Emergency manage-
23551-4 gas-burning appliances Particular require- ment Guidelines for incident response
ments Part 4: Valve-proving systems for
ISO/CD 22327 Security and resilience Emergency manage-
automatic shut-off valves
ment Community-based landslide early
TC 165 Timber structures warning system
DIS circulated
methods Part 2: Welded fabric 2017-04-18
and lattice girder
(Revision of ISO 15630-2:2010)
ISO/DIS * Steel for the reinforcement and
Period from 01 January to 31 January 2017 15630-3 prestressing of concrete Test
methods Part 3: Prestressing 2017-04-18
These documents have obtained substantial support within the ap- steel
propriate ISO technical committee. (Revision of ISO 15630-3:2010)
ISO/DIS 2004 * Natural rubber latex concen- ISO/DIS 7798 * Cross-country skis Deter-
trate Centrifuged or creamed, mination of fatigue indexes
ammonia-preserved types 2017-04-14 Cyclic loading test 2017-03-31
Specifications
(Revision of ISO 2004:2010) (Revision of ISO 7798:1984)
ISO Plastics piping systems for hot and ISO 18400- * Soil quality Sampling Part 204:
15876-3:2017 cold water installations Polybutene 204:2017 Guidance on sampling of soil gas
(PB) Part 3: Fittings C G
ISO Plastics piping systems for hot and TC 204 Intelligent transport systems
15876-5:2017 cold water installations Polybutene
ISO/TS * Intelligent transport systems Traffic
(PB) Part 5: Fitness for purpose of B
21219-24:2017 and travel information (TTI) via trans-
the system
port protocol experts group, generation F
TC 142 Cleaning equipment for air and 2 (TPEG2) Part 24: Light encryption
other gases (TPEG2-LTE)
ISO Air filters for general ventilation Part ISO/TS * Intelligent transport systems Traffic
16890-1:2016 1: Technical specifications, require- 21219-25:2017 and travel information (TTI) via trans-
ments and classification system based E port protocol experts group, generation G
upon particulate matter efficiency 2 (TPEG2) Part 25: Electromobility
(ePM) charging infrastructure (TPEG2-EMI)
ISO Air filters for general ventilation Part TC 206 Fine ceramics
16890-2:2016 2: Measurement of fractional efficiency ISO * Fine ceramics (advanced ceramics,
and air flow resistance G 19606:2017 advanced technical ceramics) Test
method for surface roughness of D
ISO Air filters for general ventilation Part fine ceramic films by atomic force
16890-3:2016 3: Determination of the gravimetric microscopy
efficiency and the air flow resistance D ISO * Fine ceramics (advanced ceramics,
versus the mass of test dust captured 19722:2017 advanced technical ceramics) Test
ISO Air filters for general ventilation Part method for determination of photo- C
16890-4:2016 4: Conditioning method to determine catalytic activity on semiconducting
the minimum fractional test efficiency B photocatalytic materials by dissolved
oxygen consumption
TC 150 Implants for surgery ISO * Fine ceramics (advanced ceramics,
20343:2017 advanced technical ceramics)
ISO Cardiovascular implants Endovas-
Test method for determining elastic B
25539-1:2017 cular devices Part 1: Endovascular
modulus of thick ceramic coatings at
prostheses H
elevated temperature
TC 211 Geographic information/
TC 165 Timber structures
Geomatics
ISO * Timber structures Determination of
ISO Geographic information Methodol-
12122-4:2017 characteristic values Part 4: Engi-
19110:2016 ogy for feature cataloguing
neered wood products B
G
ISO 18400- * Soil quality Sampling Part 103: TC 238 Solid biofuels
103:2017 Safety ISO Solid biofuels Determination of
E 18134-2:2017 moisture content Oven dry method
Part 2: Total moisture Simplified A
ISO 18400- * Soil quality Sampling Part 105: method
105:2017 Packaging, transport, storage and
TC 249 Traditional chinese medicine
preservation of samples B
ISO * Traditional Chinese medicine Panax
20408:2017 notoginseng seeds and seedlings
ISO 18400- * Soil quality Sampling Part 106:
B
106:2017 Quality control and quality assurance
B
TC 268 Sustainable cities and
ISO 18400- * Soil quality Sampling Part 107: communities
107:2017 Recording and reporting ISO/TR * Sustainable development in communi-
B 37121:2017 ties Inventory of existing guidelines
and approaches on sustainable devel- H
opment and resilience in cities
JTC 1
mental management systems
Information technology
Standards confirmed
ISO/IEC * Identification cards Identification of
7812-1:2017 issuers Part 1: Numbering system The following International Standards are confimred for a five year
B period:
ISO 14469-1:2004 (replaced by ISO 14469:2017) 21-22 Kuala Lumpur TMB Technical Manage-
(Malaysia) ment Board
ISO 14469-2:2007 (replaced by ISO 14469:2017)
9 Chicago (USA) * TC 136 Furniture 23-30 (Australia) ** JTC 1/SC 36 Information tech-
nology/Information
9 Jeju (Korea, * TC 156 Corrosion of metals technology for learn-
Republic of) and alloys ing, education and
11-16 Hiroshima City * TC 127 Earth-moving training
(Japan) machinery 25-30 Vienna (Austria) TC 37 Terminology and
12-16 Paris (France) TC 20/SC 14 Aircraft and space ve- other language and
hicles/Space systems content resources
and operations 26-27 Stockholm ** TC 184 Automation systems
13 Geneva CSC/SPC Council/Strategy and (Sweden) and integration
(Switzerland) Policy Committee 26-28 El Segundo * TC 20/SC 9 Aircraft and space
(CSC/SPC) (USA) vehicles/Air cargo and
14 Shanghai (China) * TC 30/SC 5 Measurement of ground equipment
fluid flow in closed 26-29 Ise (Japan) * TC 20/SC 1 Aircraft and
conduits/Velocity and space vehicles/
mass methods Aerospace electrical
14 (USA) ** TC 220 Cryogenic vessels requirements
14-15 Geneva ** TMB Technical Manage- 26-30 Shanghai (China) TC 29/SC 10 Small tools/Assem-
(Switzerland) ment Board bly tools for screws
and nuts, pliers and
15-16 Toronto (Canada) * TC 298 Rare earth
nippers
15-22 London (United * JTC 1/SC 28 Information technol-
26-30 London (United * TC 94/SC 4 Personal safety --
Kingdom) ogy/Office equipment
Kingdom) Protective clothing
19 (South Africa) ** PC 305 Sustainable non- and equipment/
sewered sanitation Personal equipment
systems for protection against
falls
19-20 Stockholm * TC 22/SC 32 Road vehicles/Elec-
(Sweden) trical and electronic 26-30 London (United * TC 94/SC 14 Personal safety --
components and gen- Kingdom) Protective clothing
eral system aspects and equipment/
Firefighters' personal
19-23 Tokyo (Japan) ** TC 34/SC 9 Food products/
equipment
Microbiology
26-30 Washington, D.C * TC 193 Natural gas
19-23 Cape Town * TC 69 Applications of statis-
(USA)
(South Africa) tical methods
26-30 Washington, D.C * TC 193/SC 1 Natural gas/Analysis
19-23 Cape Town * TC 69/SC 1 Applications of statis-
(USA) of natural gas
(South Africa) tical methods/Termi-
nology and symbols 26-30 Washington, D.C * TC 193/SC 3 Natural gas/Upstream
(USA) area
19-23 Cape Town * TC 69/SC 4 Applications of
(South Africa) statistical methods/ 27-28 Qingdao (China) President's President's
Applications of committee committee
statistical methods in
27-29 Berlin (Germany) * REMCO Committee on refer-
product and process
ence materials
management
27-29 Paignton (United * TC 8/SC 2 Ships and marine
19-23 Cape Town * TC 69/SC 6 Applications of statis-
Kingdom) technology/Ma-
(South Africa) tical methods/Meas-
rine environment
urement methods and
protection
results
Shanghai (China) ** TC 30 Measurement of
fluid flow in closed
conduits
16-20 Berlin (Germany) * TC 2/SC 14 Fasteners/Surface Pretoria (South ** TC 59/SC 18 Buildings and civil en-
coatings Africa) gineering works/Con-
struction procurement
16-20 Tokyo (Japan) * TC 111 Round steel link
chains, chain slings, Milan (Italy) ** TC 86/SC 7 Refrigeration and
components and air-conditioning/Test-
accessories ing and rating of com-
mercial refrigerated
16-20 Tokyo (Japan) * TC 111/SC 1 Round steel link display cabinets
chains, chain slings,
components and ac- Xian (China) ** TC 244 Industrial furnaces
cessories/Chains and and associated pro-
chain slings cessing equipment