ORBIT
ENGINEERED & PROCESS VALVES
ENGINEERED & PROCESS VALVES
TABLE OF CONTENTS
Standard Features.................................................................................. 5
Quality Assurance.................................................................................. 6
Operating Principle................................................................................ 7
Market Operations................................................................................. 8
One Piece Stem, O.S. & Y. Bonnet Valves Details and Materials.............. 14
Two Piece Stem, O.S. & Y. Bonnet Valves Details and Materials.............. 16
Markings............................................................................................... 21
How to Order........................................................................................ 24
Aftermarket Services.............................................................................. 25
Trademark Information.......................................................................... 26
CT-ORB-VALVE-01 ORBIT 3
08/10 SWP-2M
ENGINEERED & PROCESS VALVES
Little Rock, AR
The Engineered & Process Valves division provides a wide range of valves for use in
natural gas, LNG, crude oil and refined products transmission lines. The division also
provides critical service valves for refinery, chemical and petrochemical processing
businesses and for associated storage terminal applications, particularly through the
ORBIT and GENERAL VALVE lines which are manufactured at the Little Rock
facility. This broad offering has significantly strengthened Camerons ability to serve
as a single source for a wide scope of customer requirements.
The ORBIT valves block valve technology provides valves with unmatched durability,
safety and long term performance. In Camerons Valves & Measurement group Little
Rock factory, production process teams are organized into manufacturing cells, each
with responsibility for quality and on time delivery. Using Six Sigma lean methods the
result is a finished product of unmatched excellence, built with precision and pride.
4 ORBIT CT-ORB-VALVE-01
08/10 SWP-2M
ENGINEERED & PROCESS VALVES
ORBIT valves are without equal when zero leakage and frequent operation are demanded.
ORBIT valves are used globally in over 88% of gas processing plants using molecular sieve systems in switching service.
ORBIT valves are used in over 85% of LNG facilities.
CT-ORB-VALVE-01 ORBIT 5
08/10 SWP-2M
ENGINEERED & PROCESS VALVES
API 6D
ISO 9001:2008
PED (Pressure Equipment Directive) 97 / 23 / EC
ATEX Directive 94 / 9 / EC
GOST (Russian certificates)
GOST-R certificate and RTN permit
ISO 15848-1 (Fugitive emission type testing)
Shell GSI SPE 77/300 TAT qualified & TAMAP 2
star rating
ASME B16.34
Camerons Valves & Measurement group Six Sigma lean Gas Testing and Certification to the latest industry standards
manufacturing philosophy and the standard 36 month is performed under the eye of independent inspectors.
Trevisan: The Little Rock facility has recently undergone a Every ORBIT valve built is individually pressure tested to
new six sigma layout reorganization and capital expenditure meet or exceed industry standards.
investment in state-of-the-art equipment.
6 ORBIT CT-ORB-VALVE-01
08/10 SWP-2M
ENGINEERED & PROCESS VALVES
When an ORBIT valve is closed, the core is mechanically When valve leakage cannot be tolerated, the ORBIT
wedged tightly against the seat, assuring positive shut-off. operating principle can be relied upon to deliver a
positive shut-off.
When an ORBIT valve begins to open, the core tilts away
from the seat and line flow passes uniformly around the
core face.
To close an ORBIT valve, Precision spiral grooves Continued turning of Final turns of the
as the handwheel is in the stem act against the handwheel rotates handwheel mechanically
turned, the stem begins fixed guide pins, causing the core and stem a full wedge the stem down,
to lower. the stem and core to 90 without the core pressing the core firmly
rotate. touching the seat. against the seat.
CT-ORB-VALVE-01 ORBIT 7
08/10 SWP-2M
ENGINEERED & PROCESS VALVES
Flow lines
Meter isolation
Dryer switching
Block and bypass
Product segregation
Emergency shutdown
Suction and discharge isolation
Heat transfer fluids / hot oil and
many other applications
Hydrogen service
Orbit valves are ideal where frequent cycling and a positive shut-off are required,
conditions prevalent in molecular sieve applications in gas processing plants.
8 ORBIT CT-ORB-VALVE-01
08/10 SWP-2M
ENGINEERED & PROCESS VALVES
ORBIT builds complete packages that may include valve, actuator and instrumentation. Single source responsibility removes any
doubt about where to call for service.
CT-ORB-VALVE-01 ORBIT 9
08/10 SWP-2M
ENGINEERED & PROCESS VALVES
25
19
22
23
24
26
15
14
21
16
20
17
4
18
5
3
1
6
11
7
12
8
10
13
10 ORBIT CT-ORB-VALVE-01
08/10 SWP-2M
ENGINEERED & PROCESS VALVES
Actual materials of construction will depend on the valve size, pressure class, end configuration and service conditions.
Consult Orbit for detailed materials list.
This is a partial list of material options. Many alternatives can be provided to match the actual service requirements.
CT-ORB-VALVE-01 ORBIT 11
08/10 SWP-2M
ENGINEERED & PROCESS VALVES
28
27
24
30
26
23 29
25 18
19
21 22
14
2
16
17
20
15 4
1
11
6
7
12
8
10
13
12 ORBIT CT-ORB-VALVE-01
08/10 SWP-2M
ENGINEERED & PROCESS VALVES
CT-ORB-VALVE-01 ORBIT 13
08/10 SWP-2M
ENGINEERED & PROCESS VALVES
27
24
18
25
28
26
14
15
23
21 22
19
16
17
20
11
6
7
12
8
10
13
14 ORBIT CT-ORB-VALVE-01
08/10 SWP-2M
ENGINEERED & PROCESS VALVES
Actual materials of construction will depend on the valve size, pressure class, end configuration and service conditions.
Consult Orbit for detailed materials list.
This is a partial list of material options. Many alternatives can be provided to match the actual service requirements.
CT-ORB-VALVE-01 ORBIT 15
08/10 SWP-2M
ENGINEERED & PROCESS VALVES
33
32
26
30
31
27
28
21
22
29
23
20
14
15 19
16 24
17 18
25
11
6
12
7
10
13
16 ORBIT CT-ORB-VALVE-01
08/10 SWP-2M
ENGINEERED & PROCESS VALVES
CT-ORB-VALVE-01 ORBIT 17
08/10 SWP-2M
ENGINEERED & PROCESS VALVES
* Space limitations prevent the use of through bolts in some of the holes in the End Flanges on these valves.
These holes are drilled and tapped so that a shorter Stud Bolt or Capscrew can be used.
18 ORBIT CT-ORB-VALVE-01
08/10 SWP-2M
ENGINEERED & PROCESS VALVES
Valve Number of Fastener Length of Studs Number of Fastener Length of Studs Number of Fastener Length of Studs
Size Fasteners Diameter RF RTJ Fasteners Diameter RF RTJ Fasteners Diameter RF RTJ
in. Per Valve in. in. in. Per Valve in. in. in. Per Valve in. in. in.
1 8 3/4 5 5 8 7/8 5 5 - - - -
1 1/2 8 1 5 1/2 5 1/2 8 1 5 1/2 5 1/2 - - - -
2 16 7/8 5 3/4 5 3/4 16 7/8 5 3/4 5 3/4 16 1 7 7
3x2x3 16 7/8 5 3/4 5 3/4 16 1 1/8 7 7 16 1 1/4 9 9 1/4
3 16 7/8 5 3/4 5 3/4 16 1 1/8 7 7 16 1 1/4 9 9 1/4
4x3x4 16 1 1/8 6 3/4 6 3/4 16 1 1/4 7 3/4 7 3/4 16 1 1/2 10 1/4 10 3/4
4 16 1 1/8 6 3/4 6 3/4 16 1 1/4 7 3/4 7 3/4 16 1 1/2 10 1/4 10 3/4
6x4x6 24 1 1/8 7 1/2 7 1/2 24 1 3/8 10 1/4 10 1/2 16 2 13 3/4 14 1/2
6 24 1 1/8 7 1/2 7 3/4 24 1 3/8 10 1/4 10 1/2 16 2 13 3/4 14 1/2
8x6x8 24 1 3/8 8 3/4 8 3/4 24 1 5/8 11 1/2 12 3/4 24 2 15 1/4 16
8 24 1 3/8 8 3/4 8 3/4 24 1 5/8 11 1/2 12 3/4 24 2 15 1/4 16
10 x 8 x 10 32 1 3/8 9 1/4 9 1/4 24 1 7/8 13 1/4 13 1/2 24 2 1/2 19 1/2 20 1/2
10 32 1 3/8 9 1/4 9 1/4 24 1 7/8 13 1/4 13 1/2 - - - -
12 x 10 x 12 40 1 3/8 10 10 32 2 14 3/4 15 1/4 - - - -
12 40 1 3/8 10 10 32 2 14 3/4 15 1/4 - - - -
14 x 12 x 14 40 1 1/2 10 3/4 11 32 2 1/4 16 16 3/4 - - - -
16 x 12 x 16 40 1 5/8 11 1/4 11 1/2 32 2 1/2 17 1/2 18 1/2 - - - -
16 40 1 5/8 11 1/4 11 1/2 32 2 1/2 17 1/2 18 1/2 - - - -
18 x 16 x 18 40 1 7/8 12 3/4 13 1/4 - - - - - - - -
20 x 16 x 20 40 2 13 3/4 14 1/4 32 3 21 1/4 22 1/4 - - - -
20 40 2 13 3/4 14 1/4 - - - - - - - -
CT-ORB-VALVE-01 ORBIT 19
08/10 SWP-2M
ENGINEERED & PROCESS VALVES
Temperature Insert Material Support Ring Bore Sizes (in.) Seat Options
-50F to 250F (-46C to 121C) Nylon Carbon Steel 2 to 16 Type A, BB, GS
-50F to 250F (-46C to 121C) Nylon Stainless Steel 2 to 16 Type A, BB, GS
-155F to 500F (-46C to 260C) Teflon TFE Stainless Steel 1 to 24 Type H
-155F to 800F (-104C to 427C) None Stainless Steel 1 Type H8
-155F to 800F (-104C to 427C) Stainless Steel Tube Stainless Steel 1 1/2 to 24 Type H8
-50F to 570F (-46C to 300C) PEEK Stainless Steel 2 to 12 Type PK
20 ORBIT CT-ORB-VALVE-01
08/10 SWP-2M
ENGINEERED & PROCESS VALVES
Nameplate Markings for Valve Trim Nameplate Markings for Stem Packing
CT-ORB-VALVE-01 ORBIT 21
08/10 SWP-2M
ENGINEERED & PROCESS VALVES
Example: LS-185-D-5-X-S
1st Figure
L = Low Pressure Cylinder Actuator, 80 psi maximum pressure
2nd Figure
G = Double Cylinder Damping or No Damping
S = Single Cylinder Damping
3rd Figures
(12)(18)(20) etc. = Nominal Diameter of Actuator Piston (inches)
4th Figures
(3)(4)(5) etc. = Nominal Piston Stroke (inches)
5th Figure
(D)(T) etc. = Number of Cylinders (Double/Triple etc.)
6th Figures
(1)(2)(3) etc. = A
ctuator/Valve Mounting Configuration. (Consult Orbit for
specific details)
7th Figure
Accessory Features
C = Mechanical Override-Close
H = Hydraulic Override-Open, Mechanical Override Close
L = Positive Close Locking Device
M (N) = Mechanical Override Open and Close
O = Hydraulic Override-Open and Closed
X = No Accessory Features
8th Figure
S = Spring Return
22 ORBIT CT-ORB-VALVE-01
08/10 SWP-2M
ENGINEERED & PROCESS VALVES
1 1/2 84625 62584 62588 84625 62584 62588 84625 62584 62588
18 LS-267-D-19 - - - - - - - -
20 - - - LG-2611-T-29 - - LG-2611-T-29 - -
24 - - - LG-4214-D-33 - - LG-4214-D-33 - -
*Consult Factory
16 LG-2611-T-29 - - LG-4214-D-33 - - - - -
*Consult Factory
ELECTRIC ACTUATORS - Camerons Valves & Measurement group supplies Electric Actuated Valve Packages using many of the
commercially available power actuators built by other companies.
The Electric Actuator is selected, mounted, adjusted and tested by Orbit so that field performance of the entire valve assembly
can be assured.
Hydraulic Actuators - commercially available, Hydraulic Actuators built by other vendors are available upon request.
CT-ORB-VALVE-01 ORBIT 23
08/10 SWP-2M
ENGINEERED & PROCESS VALVES
ORDERING INFORMATION
How to develop figure numbers:
CLASS TRIM*
1 - ASME/ANSI 150 3 - API 1000 0 - T3 MODIFIED
2 - ASME/ANSI 300 5 - API 2000 2 - T7 MODIFIED
4 - ASME/ANSI 600 6 - API 3000 3 - STANDARD (T3)
5 - ASME/ANSI 900 7 - API 5000 5 - SPECIAL PREPARATION
6 - ASME/ANSI 1500 7 - SOUR CORROSIVE (T7)
7 - ASME/ANSI 2500 8 - CORROSIVE (316 SS) (T8)
1 4 3 3 H
MODEL PORT SIZE & CONNECTION SUFFIX**
1 - Standard 2 - Full Port, Flanged A - Type of Seat 250F MAX (121C)
2 - Low Temp -50F (-46C) 3 - Reduced Port, Flanged H - Type of Seat 500F MAX (260C)
3 - Alloy Steel 4 - Full Port, Threaded H8 - Type of Seat 800F MAX (427C)
4 - API 5 - Reduced Port, Butt Weld PK - Type of Seat 570F MAX (299C)
5 - National Grid (UK) 6 - Full Port, Butt Weld L - Adapted for Actuator
6 - Corrosive: 316 SS -155F (-104C) 6 - Full Port, Socket Weld BB - Block and Bleed Model
7 - Duplex SS 6 - Full Port, Butt Weld x RF GS - Grease Seal Model
8 - Drilling Valves S - Non-Standard End to End Dimension
9 - High Nickley Alloy SC - Chevron Special Trim
NOTE: See page 16 for Seat Selection
EXAMPLE
1433H = Standard, ASME/ANSI Class 600, Reduced Port Flanged, Standard (T3)
* For a more complete explanation of Trims and Figure Numbers, consult your Orbit Representative.
** Valve Figure Number may use more that one suffix. Example 1433H8L
Camerons Valves & Measurement group reserves the right to substitute materials listed on the following pages with alternate
materials for the designated service.
24 ORBIT CT-ORB-VALVE-01
08/10 SWP-2M
ENGINEERED & PROCESS VALVES
AFTERMARKET SERVICES
Aftermarket Services
Supplies replacement valves and parts: Customer Property Repair
Maintains a full inventory of new and The Customer Property Repair program allows
reconditioned valves for immediate delivery Cameron valve customers to store assets at our
Provides factory warranty support for all service centers throughout the world
Cameron OEM brands as well as service for most Valves tracked in electronic database accessible
other valves through the Internet
Field Service & Technical Support Remanufactured Products
Field service technicians on call 24 hours a day 7 Offers a broad range of API-compliant
days a week to handle service issues wherever reconditioned equipment with fast delivery
they arise Total Valve Management
Provides equipment installation, field repairs, as Supply and service automation and control
well as track and perform scheduled packages
maintenance Assist with valve installation, commissioning
and start-up
CT-ORB-VALVE-01 ORBIT 25
08/10 SWP-2M
ENGINEERED & PROCESS VALVES
TRADEMARK INFORMATION
Trademark Owner
Carpenter 450 Carpenter Technology Corp.
26 ORBIT CT-ORB-VALVE-01
08/10 SWP-2M
ENGINEERED & PROCESS VALVES
ENGINEERED & PROCESS VALVES
For the most current contact and location information go to: www.c-a-m.com