MINI
MINI CONVERTIBLE
Contents
A to Z
2
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
OVERVIEW
Driving: Technology for safety and driving OPERATION, CARE, MAINTENANCE
Ignition lock 53 convenience:
Starting the engine 53 Driving stability control systems 72 Special operating instructions:
Switching off the engine 54 Flat Tire Monitor 74 Break-in procedures 102
Parking brake 54 Tire Pressure Monitor 76 General driving notes 102
CONTROLS
Manual transmission 55 Airbags 79 Refueling 105
Automatic transmission with Park Distance Control (PDC) 81
Wheels and tires:
Steptronic 56
Controlling the climate for pleasant Tire inflation pressure 108
Parking lamps/Low beams 60
driving: Tire coding 112
Turn signal indicator/Headlamp
Air conditioning system 82 Tire condition 113
flasher 61
OPERATION
Automatic climate control 85 Run-Flat Tires 115
Instrument lighting 62
New wheels and tires 116
Fog lamps 62 Interior conveniences:
Snow chains 117
Interior lamps 62 Glove compartment 88
Washer/wiper system 63 Center armrest 89
Washer fluid 64 Drinks holders, ashtray 89
Cruise control 65 Cigarette lighter, 12 V power supply 90
REPAIRS
Integrated universal remote control 91
Everything under control:
Odometer 67 Loading and transporting cargo:
Clock 67 Luggage compartment in the MINI 93
Fuel gauge 67 Luggage compartment in the MINI
Coolant temperature gauge 68 Convertible 94
Tachometer 69 Loading cargo 95
Service interval display 69
DATA
Roof-mounted luggage rack 98
Onboard computer 70
INDEX
3
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
CONTENTS
4
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
OVERVIEW
INDEX
CONTROLS
OPERATION
REPAIRS
DATA
INDEX
5
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
NOTES
6
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
NOTES
OVERVIEW
Editorial notice Should you encounter driveability prob- California Proposition 65 warning:
The manufacturer pursues a policy of con- lems which you suspect could be related to California laws require us to state the fol-
tinuous, ongoing development that is con- the fuel you are using, we recommend that lowing warning.
ceived to ensure that MINI vehicles con- you respond by switching to a recognized
Engine exhaust and a wide variety of
tinue to embody the highest quality and high-quality brand.
CONTROLS
automobile components and parts,
safety standards combined with advanced, Failure to comply with these recommenda-
including components found in the interior
state-of-the-art technology. For this rea- tions may result in unscheduled mainte-
furnishings in a vehicle, contain or emit
son, the features described in this Owner's nance.
chemicals known to the State of California
Manual could, in rare cases, differ from Obey pertinent safety rules when you are
to cause cancer and birth defects and
those in your vehicle. handling gasoline.<
reproductive harm. In addition, certain flu-
OPERATION
ids contained in vehicles and certain prod-
For your own safety Maintenance and repair:
ucts of component wear contain or emit
Fuels: Advanced technology, e.g. the use of chemicals known to the State of California
modern materials and powerful elec- to cause cancer and birth defects or other
Use unleaded gasoline only. Fuels
tronics, requires specially adapted mainte- reproductive harm.
containing up to and including 10%
nance and repair methods. Have the neces- Battery posts, terminals and related acces-
ethanol or other oxygenates with up to
sary work on your MINI carried out by a sories contain lead and lead compounds.
2.8% oxygen by weight, i.e. 15% MTBE or
REPAIRS
MINI Dealer or a workshop that has spe- Wash your hands after handling. Used
3% methanol plus an equivalent amount of
cially trained personnel working in accor- engine oil contains chemicals that have
co-solvent, will not void the applicable war-
dance with the specifications of the MINI caused cancer in laboratory animals.
ranties with respect to defects in materials
manufacturer. Work that is improperly car- Always protect your skin by washing thor-
or workmanship. Field experience has indi-
ried out could result in consequential dam- oughly with soap and water.<
cated significant differences in fuel quality,
age and pose safety hazards.<
i.e. volatility, composition, additives, etc.,
DATA
among gasolines offered for sale in the
United States and Canada. The use of
poor-quality fuels may result in driveabil-
ity, starting and stalling problems espe-
cially under certain environmental condi-
tions, such as high ambient temperature
INDEX
and high altitude.
7
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
NOTES
Parts and accessories: approved accessories such as alarms, Service and warranty
For your own safety, use genuine radios, amplifiers, radar detectors, wheels, This manual is supplemented by a Service
parts and accessories approved by suspension components, brake dust and Warranty Information Booklet for US
the manufacturer of the MINI. shields, telephones, including operation of models or a Warranty and Service Guide
When you purchase accessories tested any portable cellular phone from within Booklet for Canadian models.
and approved by the manufacturer of the the vehicle without using an externally
We recommend that you read this publica-
MINI and Original MINI Parts, you simulta- mounted antenna, or transceiver equip- tion thoroughly.
neously acquire the assurance that they ment, e.g. CB, walkie-talkie, ham radio or
Your MINI is covered by the following war-
have been thoroughly tested by the manu- similar, may cause extensive damage to the
vehicle, compromise its safety, interfere ranties:
facturer of the MINI to ensure optimum
performance when installed on your vehi- with the vehicle's electrical system or affect >New Vehicle Limited Warranty
cle. the validity of the MINI Limited Warranty. >Rust Perforation Limited Warranty
The manufacturer of the MINI warrants See your MINI Dealer for additional infor- >Federal Emissions System Defect War-
these parts to be free from defects in mate- mation.< ranty
rial and workmanship. >Federal Emissions Performance War-
The manufacturer of the MINI will not Maintenance, replacement, or repair ranty
accept any liability for damages resulting of the emission control devices and >California Emission Control System Lim-
from installation of parts and accessories systems must be performed by an autho- ited Warranty.
not approved by the manufacturer rized MINI Dealership or individual using Detailed information about these warran-
of the MINI. certified MINI parts.< ties is listed in the Service and Warranty
The manufacturer of the MINI cannot test Information Booklet for US models or in the
every product from other manufacturers to Symbol on vehicle parts Warranty and Service Guide Booklet for
verify if it can be used on a MINI safely and Indicates that you should consult the Canadian models.
without risk to either the vehicle, its opera- relevant section of this Owner's Man-
tion, or its occupants. ual for information on a particular part or
Original MINI Parts, MINI Accessories and assembly.
other products approved by the manufac-
turer of the MINI, together with profes-
sional advice on using these items, are
available from all MINI Dealers.
Installation and operation of non-MINI
8
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
NOTES
OVERVIEW
Reporting safety defects vehicle safety from
For US customers: http://www.safercar.gov
The following only applies to vehicles For Canadian customers:
owned and operated in the US. Canadian customers who wish to report a
CONTROLS
If you believe that your vehicle has a defect safety-related defect to Transport Canada,
which could cause a crash or could cause Defect Investigations and Recalls, may call
injury or death, you should immediately 1-800-333-0510 toll-free from anywhere in
inform the National Highway Traffic Safety Canada or 1-613-993-9851 from the
Administration NHTSA in addition to noti- Ottawa region and from other countries, or
fying the MINI Division of BMW of North contact Transport Canada by mail at:
OPERATION
America, LLC, P.O. Box 1227, Westwood, Transport Canada, ASFAD, Place de Ville,
New Jersey 07675-1227, telephone toll- Tower C, 330 Sparks Street, Ottawa, ON,
free 1-866-275-6464. K1A 0N5.
If NHTSA receives similar complaints, it You can also obtain other information
may open an investigation, and if it finds about motor vehicle safety from
that a safety defect exists in a group of http://www.tc.gc.ca
REPAIRS
vehicles, it may order a recall and remedy
campaign. However, NHTSA cannot
become involved in individual problems
between you, your dealer, or BMW of North
America, LLC.
To contact NHTSA, you may call the Vehicle
Safety Hotline toll-free at 1-888-327-4236
DATA
(TTY: 1-800-424-9153); go to
http://www.safercar.gov; or write to:
Administrator, NHTSA, 400 Seventh Street,
SW., Washington, DC 20590. You can also
obtain other information about motor
INDEX
9
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
10
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
OVERVIEW
OVERVIEW
CONTROLS
CONTROLS
OPERATION
OPERATION, CARE, MAINTENANCE
REPAIRS
OWNER SERVICE PROCEDURES
DATA
TECHNICAL DATA
INDEX
INDEX
11
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
COCKPIT
12
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
DISPLAY ELEMENTS
OVERVIEW
CONTROLS
OPERATION
REPAIRS
1 Tachometer 69 4 Indicator for 6 Fuel gauge 68
with indicator and warning lamps, >Odometer 67 7 Engine coolant temperature gauge 68
DATA
page 16 ff >Trip odometer 67
2 Display for onboard computer 70 >Service interval 69
without onboard computer: >Program indicator for automatic
Display of outside temperature and cur- transmission with Steptronic 57
rent speed >Clock
INDEX
3 Speedometer with indicator and warn- 5 Trip odometer, reset to zero 67
ing lamps, page 16 ff Setting the clock 67
13
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
DISPLAY ELEMENTS WITH NAVIGATION SYSTEM* OR COCKPIT CHRONO PACK*
14
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
DISPLAY ELEMENTS WITH NAVIGATION SYSTEM* OR COCKPIT CHRONO PACK*
OVERVIEW
CONTROLS
OPERATION
REPAIRS
1 Indicator and warning lamps, page 16 ff 3 Engine oil temperature 6 Indicator and warning lamps, page 16 ff
2 Fuel gauge 68 4 Engine oil pressure 7 Fuel gauge 68
DATA
5 Coolant temperature
For more information about the navigation
system, refer to the Owner's Manual for
Navigation System.
INDEX
15
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
INDICATOR AND WARNING LAMPS
Technology that monitors itself Red: stop immediately Brake warning lamp +
The system runs a check on the indicator Battery charge current + Lights up although the parking
and warning lamps marked by + when you The battery is no longer being brake is released. The brake fluid
turn the key in the ignition lock. They each charged. Indicates a defective alter- level is too low. Before driving further, be
light up once for different periods of time. nator drive belt or a problem with the sure to comply with the information on
charge circuit. Please contact your MINI page 124. Have the system checked imme-
If a malfunction should occur in one of
Dealer. diately.
these systems, the corresponding lamp
does not go out after the engine is started If the drive belt is defective, do not Canadian models display this
or it lights up while the vehicle is moving. continue driving. The engine could be warning lamp.
You will see below the correct way to react damaged due to overheating. When the
to this. power-assist is deactivated, increased If equipped with a navigation system or
steering effort is required.< Cockpit Chrono Pack:
Coolant temperature warning
Engine oil pressure + lamp in the navigation system or
The engine oil pressure is too low. Cockpit Chrono Pack +
Pull over immediately and switch Lights up while driving:
off the engine. Please contact your MINI engine is too hot. Pull over to the side of
Dealer. the road immediately, switch off the
Do not continue driving; otherwise, engine and allow it to cool down, refer also
the engine could be damaged to page 68. Have the system checked
because of inadequate lubrication.< immediately.
16
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
INDICATOR AND WARNING LAMPS
OVERVIEW
Yellow: stop immediately Red and yellow: continue to drive, but Red: an important reminder
Flat Tire Monitor* or Tire Pressure use great caution Brake warning lamp with parking
Monitor* + Brake warning lamp together with brake applied.
The warning lamp indicates a flat yellow indicator lamps for ABS, More information on the parking
tire, low inflation pressure or system mal- CBC, EBD and ASC/DSC: brake on page 54.
CONTROLS
function. In the event of a flat tire, an driving stability control has failed. Warning lamp in Canadian models.
acoustic signal also sounds. Drive cautiously and defensively.
Reduce speed immediately and stop the Avoid full brake applications.
vehicle. Have the system checked as soon
Fasten safety belts +
It is possible that the acoustic signal was as possible.
Lights up for several seconds or
OPERATION
not heard. In this case, proceed as follows More information on page 72.
until the safety belt has been fas-
to determine whether you have a flat tire, Canadian models display these tened.
lower inflation pressure or if a system mal- warning lamps. A signal* also sounds depending on the
function has occurred: version.
1. Switch off the ignition, ignition key posi- More information on page 46.
tion 0 Bonnet/tailgate/sliding sunroof*
2. Switch the ignition back on, ignition key
REPAIRS
Comes on if the bonnet, tailgate or
position 2, or start the engine. sliding sunroof is open.
If an acoustic signal sounds, you have a flat More information on pages 29, 35, 118.
tire or low inflation pressure. Otherwise,
the system has a malfunction or has failed.
Continue as follows:
>Flat Tire Monitor, beginning on page 75.
DATA
>Tire Pressure Monitor, beginning on
page 76.
INDEX
17
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
INDICATOR AND WARNING LAMPS
18
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
INDICATOR AND WARNING LAMPS
OVERVIEW
Yellow: for your information Green: for your information Blue: for your information
The warning lamp* comes on. Turn signal indicator High beams
The gas cap is not correctly closed Flashes when turn signal indicator Comes on when the high beams
or missing. Check if the gas cap is is on. are on or the headlamp flasher is
correctly closed. Rapid flashing: at least one turn signal indi- actuated.
CONTROLS
cator has failed. More information on page 61.
More information on page 61.
Cruise control
Comes on while the system is
switched on: operation via the
OPERATION
multifunction steering wheel or the sports
steering wheel with multifunction buttons.
More information on page 65.
REPAIRS
DATA
INDEX
19
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
MULTIFUNCTION STEERING WHEEL*
20
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
OVERVIEW
CONTROLS
OPERATION
REPAIRS
DATA
INDEX
21
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
22
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
OVERVIEW
OVERVIEW
CONTROLS
CONTROLS
OPERATION
OPERATION, CARE, MAINTENANCE
REPAIRS
OWNER SERVICE PROCEDURES
DATA
TECHNICAL DATA
INDEX
INDEX
Controls 23
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
KEYS CENTRAL LOCKING SYSTEM
24
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
OPENING AND CLOSING: FROM OUTSIDE
OVERVIEW
Via remote control Compliance statement:
When the vehicle is unlocked or locked, the This device complies with part 15 of the
anti-theft system is also deactivated/acti- FCC Rules. Operation is subject to the fol-
vated and the interior lamp is switched on/ lowing two conditions:
off. >This device may not cause harmful inter-
CONTROLS
ference, and
People or animals could lock the >this device must accept any interference
doors from the inside. Always take received, including interference that may
the vehicle keys with you so that the vehi- cause undesired operation.
cle can be opened again from the outside at
OPERATION
any time.< Any unauthorized modifications or
changes to these devices could void
For US owners only the user's authority to operate this equip-
The transmitter and receiver units comply ment.<
with part 15 of the FCC, Federal Communi-
cations Commission, regulations. Opera-
tion is governed by the following:
REPAIRS
FCC ID: LX8765S
LX8765E
LX8CAS
DATA
INDEX
25
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
OPENING AND CLOSING: FROM OUTSIDE
26
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
OPENING AND CLOSING: FROM OUTSIDE
OVERVIEW
Malfunction Manual operation
Local radio waves can interfere with func- In the event of an electrical malfunction,
tions of the remote control. the driver's door can be unlocked or locked
If this occurs, lock and unlock the vehicle by turning the key in the door lock to the
end positions.
CONTROLS
via a door lock.
In the event of a system malfunction,
Convenience closing via the door lock
please contact your MINI Dealer. You can
also obtain replacement keys there. You can also close the power windows,
glass sunroof or the convertible top via the
If it is no longer possible to lock the door lock.
OPERATION
vehicle with the remote control, then With the door closed, hold the key in the
the battery is discharged. Use the corre- Via the door lock locking position.
sponding key for a longer journey so that 1. Turn the key. In the MINI Convertible, the convertible top
its battery can be recharged.< The driver's door is unlocked. is closed first and then the side windows.
2. Turn the key again.
All other doors, the tailgate and the fuel You can have the closing of the win-
REPAIRS
filler door are unlocked. dows and glass sunroof via the door
lock activated/deactivated.<
You can have this function activated/
deactivated.<
DATA
When the vehicle is unlocked, the hazard
warning flashers flash twice*.
INDEX
27
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
OPENING AND CLOSING: FROM INSIDE
28
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
TAILGATE
OVERVIEW
CONTROLS
OPERATION
To open from the outside Tailgate on the MINI Convertible To close
Press the button in the handle strip or the The maximum load that may be To avoid injuries, as with all closing
button on the remote control, refer to placed on the open tailgate is procedures be sure that the travel
page 26. The tailgate is unlocked and can 175 lbs/80 kg.< path of the tailgate is clear when it is
be opened. closed.<
REPAIRS
Handle recesses on the MINI
The handle recesses in the interior trim
panel of the tailgate make it easier to pull it
down.
DATA
INDEX
29
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
TAILGATE
Manual release in the MINI 2. Fold the rear bench seat upward and
In the event of an electrical malfunction, remove the hook attached to it
you can also unlock the tailgate manually. 3. Using the hook, reach backward
between the convertible top and the
1. Fold the rear seat bench upward
rear backrest to pull one of the levers for
2. Pull the ring.
releasing the folding rear backrests,
The tailgate is released.
refer to page 95
4. Fold rear backrests forward
30
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
TAILGATE ELECTRIC POWER WINDOWS
OVERVIEW
From ignition key position 1:
Press the switch upwards.
The window closes until you release the
switch.
CONTROLS
Watch the closing process to ensure
that no one is injured.<
OPERATION
windows for a limited period as long as no
5. Pull the handle, see arrow. To open the windows one opens either of the doors.
The tailgate is released. >Press the switch downwards.
When leaving the vehicle, always
The window opens until you release the
take the ignition key with you. Other-
switch or
wise children could operate the power win-
>Tap the switch downwards.
dows and injure themselves.<
REPAIRS
The window opens automatically.
Tapping the switch again stops the oper-
ation.
DATA
wise personal injury could result when the
windows close.<
INDEX
31
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
ELECTRIC POWER WINDOWS
32
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
GLASS SUNROOF, ELECTRIC*
OVERVIEW
To open and close After the ignition has been switched
Be sure that adequate clearance is off
maintained for the opening path of You can continue using the glass sunroof
the glass sunroof; otherwise damage can for a limited period as long as no one opens
occur. Observe the glass sunroof while it is either of the doors.
CONTROLS
closing, to make sure that no one is If a door is opened during operation, the
injured.< opening/closing process stops immedi-
ately.
>Push the switch backwards to the resis-
tance point. When leaving the vehicle, remove the
OPERATION
The glass sunroof opens for as long as ignition key from the lock and close
the switch is held in this position. the doors. Otherwise children could oper-
To raise
>Push the switch backwards past the ate the sunroof and injure themselves.<
Press the switch. resistance point. The glass sunroof opens
>The closed glass sunroof is raised. automatically. Tapping the switch again
>The closed glass sunroof automatically stops the operation.
moves into the raised position. The glass sunroof is closed in the same
REPAIRS
manner by pushing the switch forward.
Do not use force to close the glass
sunroof from its raised position, oth-
erwise the mechanism will be damaged.<
DATA
INDEX
33
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
GLASS SUNROOF, ELECTRIC* ROLLER SUN BLIND*
34
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
CONVERTIBLE TOP WITH INTEGRATED SLIDING SUNROOF
OVERVIEW
Power convertible top Driving off before an opening or clos-
So that you can get the most enjoyment ing procedure is completely finished
out of your MINI Convertible, please can lead to damage or personal injury.
observe the following tips: Make sure that the convertible top's travel
path is clear and do not reach into the con-
>It is recommended that you close the
CONTROLS
vertible top mechanism during opening or
convertible top whenever the vehicle is
closing procedures, otherwise injuries may
parked.
result. Keep children away from the swivel-
The closed convertible top not only pro-
ing area of the convertible top while it is in
tects the vehicle interior from damage
operation.<
due to unforeseen bad weather, but also
OPERATION
provides a certain degree of protection
Before closing the convertible top, remove
Opening and closing the sliding against theft
any foreign objects from the windshield
sunroof >Even when the convertible top is closed,
frame. They could prevent the convertible
keep valuable items in the locked lug-
To open: top from closing.
gage compartment or in the lockable
Press button 2 until the desired sunroof
glove compartment
position is reached. To conserve battery power, if possible
>Do not mount any roof rack systems on
REPAIRS
To close: operate the convertible top only
the convertible top
Press button 1. while the engine is running.
>To avoid damage, do not operate the
Only operate the convertible top when the
The sliding sunroof can be operated up to a convertible top at temperatures below
vehicle is at a standstill. Otherwise, the pro-
road speed of 75 mph / 120 km/h. 147/106.
cedure cannot be carried out or it will be
interrupted.
Do not leave the convertible top
In order to operate the convertible top, the
folded for more than one day if it is
DATA
loading aid must be locked and the luggage
wet, to prevent permanent damage from
compartment cover must be in its lower
moisture. Do not place any objects on the
position, refer to page 94.<
convertible top, as they could otherwise fall
off while the convertible top is being oper-
ated and result in damage or personal
INDEX
injury.<
35
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
CONVERTIBLE TOP WITH INTEGRATED SLIDING SUNROOF
To close: Checking
Press button 1 until the convertible top and >The LED lights up during convertible top
sliding sunroof are closed. operation until the opening or closing
If the convertible top is left open for a procedure is completely finished
longer period of time, it may be necessary >The LED flashes for approx. 60 seconds
to support the first automatic closing pro- after the button is released. The opening
cedure. If the convertible top or sliding sun- or closing procedure has not yet been
roof stops just before the closing procedure completed. The procedure can be contin-
is finished: ued in the desired direction by pressing
the appropriate button
1. Unlock the loading aid, refer to page 94
>The LED flashes rapidly. The convertible
2. Close the convertible top and sliding
top cannot be operated.
Opening and closing the convertible sunroof completely
The luggage compartment cover is not in
top 3. Lock the loading aid, refer to page 94.
its lower position, refer to page 94, or the
Observe the instructions and safety precau- loading aid is not correctly locked, refer
tions described above. to page 94.
To open:
While the vehicle is stationary, press but-
ton 2 to open the sliding sunroof. Pressing
the button again opens the convertible top.
The side windows move down when the
button for convertible top operation is
pressed.
The windows close again when you keep
the button pressed for more than two sec-
onds after the opening procedure is fin-
ished and the LED has gone out.
36
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
CONVERTIBLE TOP WITH INTEGRATED SLIDING SUNROOF
OVERVIEW
Interruption secutive attempts to operate it, the con- Manual closing in the event of an
The automatic movement is immediately vertible top system has overheated. Allow electrical malfunction
interrupted when the buttons for convert- the system to cool down for approx. Only close the convertible top manu-
ible top operation are released. The proce- 20 minutes.< ally if it is absolutely necessary. Never
dure can be continued in the desired direc- open it manually. Improper handling of the
CONTROLS
tion by pressing the appropriate buttons. If the battery is disconnected, e.g. for convertible top can result in damage. The
changing batteries or vehicle storage, closing procedure must be completely fin-
If the opening or closing procedure is inter-
reinitialize the power windows, refer to ished. Otherwise, damage or injury could
rupted by releasing the respective button,
page 32. Otherwise the windows will not result.<
the convertible top stays in its current posi-
be lowered when the convertible top is
tion for several seconds before it slowly
opened.<
OPERATION
moves into a more stable position. The pro-
cedure can be continued by pressing the
Convenience operation
appropriate button.
For convenience operation using the
Movement is also interrupted when there
remote control refer to page 26, for opera-
is a mechanical blockage. In this case, in
tion via the door lock refer to page 27.
order to operate the convertible top again:
REPAIRS
1. Turn off the ignition and then switch it
on again
2. Press the button to continue the proce-
dure in the desired direction.
DATA
ing procedure several times one after
another, or the convertible top mechanism
could be damaged.<
INDEX
only one direction after several con-
37
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
CONVERTIBLE TOP WITH INTEGRATED SLIDING SUNROOF
38
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
CONVERTIBLE TOP WITH INTEGRATED SLIDING SUNROOF WIND DEFLECTOR*
OVERVIEW
With the convertible top open, the wind
deflector keeps air movement in the pas-
senger compartment to a minimum, thus
providing you with a pleasant drive, even at
higher speeds. The wind deflector comes
CONTROLS
folded in a protective pouch and can be
stored in the luggage compartment.
OPERATION
not place any objects on the installed wind
Closing the convertible top To close the sliding sunroof deflector. When storing the wind deflector
If possible, close the convertible top 1. Insert the hexagon wrench into the des- in the luggage compartment, make sure
with the help of a second person.< ignated socket in the middle of the roof that it cannot be damaged by other
2. Knock the hexagon wrench in the direc- objects.<
1. Place both hands on the convertible top tion of arrow 1 to uncouple the sliding
REPAIRS
on the respective side frame sunroof mechanism. The hexagon
2. Lift out both sides at the same time, and wrench moves upwards
swing the convertible top forward onto 3. Turn the hexagon wrench in the direc-
the cowl tion of arrow 2.
3. Inside the vehicle, use a screwdriver to
pry out the cover in the center of the To lock the convertible top
roof. Continue to turn the hexagon wrench until
DATA
the convertible top is locked in place.
INDEX
39
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
WIND DEFLECTOR*
40
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
WIND DEFLECTOR*
OVERVIEW
CONTROLS
OPERATION
Collapsing Adjusting screws
1. To unlock, push the handle of the secur- The gap between the wind deflector and
ing pin on the side into its rearmost posi- the side trim panel can be adjusted using
tion, see arrow 1 the adjusting screw.
2. Collapse the wind deflector, see
REPAIRS
arrows 2.
DATA
INDEX
41
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
SAFE SEATING POSITION
The ideal seating position can make a vital Make sure that passengers do not lean equipped with four seats, each of which is
contribution to relaxed, relatively fatigue- their heads against the side or head airbag, provided with a safety belt.
free driving. Together with the safety belts as injuries could result if the side airbags
and airbags, the seating position also plays were triggered.< Never allow more than one person to
an important role in providing occupants wear a single safety belt. Never allow
with maximum levels of passive safety in Even if all these instructions are followed, it infants or small children to ride in a passen-
an accident. To ensure that the safety sys- cannot entirely be ruled out that in some ger's lap. Make sure that the belt in the lap
tems operate with optimal efficiency, we circumstances injury may result from con- area sits low across the hips and does not
strongly urge you to observe the instruc- tact with the airbags. In sensitive individu- press against the abdomen. The safety belt
tions contained in the following section. als, the ignition and inflation noise may must not rest against the throat, run across
For additional information about trans- induce a mild hearing loss that is usually sharp edges, pass over hard or fragile
porting children safely, refer to page 50. temporary. objects or be pinched. Fasten the safety
For airbag locations and additional infor- belt so that it is not twisted and sits as
Airbags mation on airbags, refer to page 79. snugly as possible against the lap and
shoulder. Otherwise the belt could slide
Always maintain an adequate dis-
Head restraint over the hips and injure the abdomen in
tance between yourself and all of the
the event of a frontal collision. Avoid wear-
airbags. Always hold the steering wheel by A correctly adjusted head restraint reduces
ing bulky clothing and pull the belt in the
the rim with the hands at the 9 and the risk of injury to the cervical spine in the
upper-body area upward periodically to
3 o'clock positions to keep any chance of event of an accident.
retension it. Otherwise, the restraining
injury to hands or arms to an absolute min- Adjust the head restraint in such a effect of the safety belt could be dimin-
imum, should the airbag be deployed. way that it is centered roughly at ear ished.<
No one and nothing is to come between level. Otherwise, there is an increased risk
the airbags and the seat occupant. Do not of injury in the event of an accident.<
For information on using the safety belts,
use the front passenger airbag cover as a
refer to page 46.
storage surface for objects of any kind. Safety belt
Ensure that the front passenger is correctly
Fasten your safety belt before each drive.
seated, e.g. that no feet or legs are propped
Airbags are an additional safety device and
against the dashboard. Otherwise, leg
work in conjunction with the safety belts,
injury could result if the front passenger
but do not replace them. Your vehicle is
airbag suddenly deployed.
42
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
SEAT ADJUSTMENT
OVERVIEW
Important adjustment information
Never try to adjust your seat while
operating the vehicle. The seat could
respond with an unexpected movement,
and the ensuing loss of vehicle control
CONTROLS
could lead to an accident.
While driving, do not recline the backrest
too far toward the rear; this especially
applies to the front passenger seat. Other-
wise there is a risk that you will slide under
OPERATION
the safety belt in an accident, thus reducing
the protection provided by the safety
Longitudinal adjustment Height adjustment
belt.<
1. Lift the handle 1. Upward:
Comply with the instructions on head 2. Push the seat into the desired position pull the handle repeatedly, continuing
restraint height adjustment on page 44 3. After releasing the handle, apply pres- until the seat reaches the desired height
and on damaged safety belts on page 47. sure to the seat to ensure that the latch 2. Downward:
REPAIRS
engages securely. push the handle repeatedly, continuing
until the seat reaches the desired height.
DATA
INDEX
43
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
SEAT ADJUSTMENT HEAD RESTRAINTS
44
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
HEAD RESTRAINTS ENTRY TO THE REAR
OVERVIEW
Adjust the head restraint in such a Original position
way that it is centered roughly at ear Slide the seat back to its home posi-
level. Otherwise, there is an increased risk tion before folding back the backrest,
of injury in the event of an accident. otherwise the seat is latched in at its cur-
To avoid possible violation of traffic laws, rent position. In this case, adjust the longi-
CONTROLS
never retract the head restraints unless the tudinal position manually, refer to
rear seats are empty. Always ensure that page 43.<
the head restraints are raised before trans-
porting passengers in the rear seat.< 1. Push the seat back into its home posi-
tion
Removal
OPERATION
2. Fold the backrest back to the home posi-
1. Pull up the head restraint as far as it will tion to lock the seat.
go
Easy entry
2. Press the button, see arrow 1, while pull- The Easy entry function includes a memory When sliding the seat to the rear-
ing the head restraint all the way out. for the longitudinal seat and the backrest most position, ensure that no one is
positions. injured and that no objects are damaged.
Installation 1. Push down the lever at the outside of Engage and lock both seats and backrests
REPAIRS
1. Insert the head restraint into the guides the seat, see arrow 1. into position prior to driving; otherwise
2. Adjust the head restraint. The backrest folds forward automati- unexpected movement could increase the
cally risk of an accident.<
2. Push the seat forward, see arrow 2.
DATA
INDEX
45
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
SAFETY BELTS
To release
Comply with the instructions on 1. Press the red button in the belt buckle Safety belt height adjustment in the
page 42, or the occupants' personal 2. Hold the belt MINI
safety will be diminished.< 3. Guide the belt back into its reel. Press the button and at the same time push
Make sure every occupant fastens his or the entire unit upwards or downwards.
her safety belt. Airbags are an additional Also observe the instructions on adjusting
safety device and work in conjunction with the seats on page 42.
the safety belts, but do not replace them.
Safety belt height in the MINI
To close Convertible
Make sure you hear the lock engage in the The seat belt height is adapted to your
belt buckle. body size if you are sitting correctly.
46
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
SAFETY BELTS SEAT HEATING* STEERING WHEEL
OVERVIEW
Damaged safety belts
If the safety belts are stressed or
damaged due to an accident: have
the belt system, including the seat-belt
tensioners, replaced and the belt anchor-
CONTROLS
ages inspected. Have the necessary work
carried out only by a MINI Dealer or a work-
shop that has specially trained personnel
working in accordance with the specifica-
tions of the MINI manufacturer, otherwise
OPERATION
correct operation of these safety systems is
not ensured.<
Press once for each temperature level. Do not adjust the steering wheel
The highest preselected temperature is set while the vehicle is moving; other-
when two LEDs are lit. wise unexpected movement could increase
the accident risk.<
To switch off:
Settings
REPAIRS
Press the button for a longer period.
1. Push the locking lever downward
2. Adjust the desired steering wheel posi-
tion
3. Pull the lever back in.
DATA
INDEX
47
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
MIRRORS
To adjust manually
The mirrors can also be adjusted manually:
48
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
VEHICLE MEMORY
OVERVIEW
How the system functions >Setting units for display of temperatures
No doubt you have often reflected on how specified for automatic climate control
great it would be if you could configure system, refer to page 87
your vehicle's various adjustment settings >Volume control PDC, refer to page 81
to meet your own personal requirements. >Acoustic alarm for starting PDC activa-
CONTROLS
In developing this vehicle, the manufac- tion, refer to page 81.
turer of the MINI has incorporated a num-
ber of options which can be programmed This symbol alerts you to Vehicle
specifically for your vehicle. Memory functions in the Owner's
Manual.<
OPERATION
What the system can do
After memory functions have been
Your MINI Dealer can provide you with
reconfigured, your vehicle may oper-
details on the capabilities of the Vehicle
ate slightly differently from the descrip-
Memory system.
tions used in this Owner's Manual. If you
Examples for Vehicle Memory: decide to sell your vehicle one day, please
>Automatic locking if none of the vehicle remember to have the memory functions
REPAIRS
doors are opened, refer to page 26 reset to their default configuration.<
>Automatic locking after starting to drive,
refer to page 28
>Selective central locking system, refer to
pages 26, 27
>Convenience operation, refer to
pages 26, 27
DATA
>Pathway lighting, refer to page 60
>Daytime running lamps, refer to page 61
>Speed-dependent windshield wipers,
refer to page 63
>Setting units for outside temperature
and fuel consumption display, refer to
INDEX
page 70
49
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
TRANSPORTING CHILDREN SAFELY
The proper place for children ger seat, the front and side airbags for the Installing child-restraint systems
Do not leave children unattended in front passenger must be deactivated. Oth- Always follow the manufacturer's
the vehicle; otherwise they could erwise, there is a significant risk of injury to instructions when selecting, install-
endanger themselves and others by open- the child if the airbags deploy, even if the ing and using child-restraint systems; oth-
ing the doors, for example.< child is seated in a child-restraint system. erwise the system's protective effect could
Your MINI Dealer will be glad to advise be diminished.<
Children should always sit in the rear you.<
Accident research shows that the safest
For additional information on automatic
place for children is on the rear seats.
deactivation of the front passenger airbags,
refer to page 79.
Only transport children under the age
of 13 or smaller than 5 ft/150 cm in
the rear in a child-restraint system suitable
for their age, weight and size. Otherwise
there is an increased risk of injury in the
event of an accident.<
50
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
TRANSPORTING CHILDREN SAFELY
OVERVIEW
CONTROLS
OPERATION
Child seat security Child-restraint systems with tether Guiding the tether strap
All rear safety belts and the safety belt for strap 1. Slide the head restraint up
the front passenger can be prevented from As an example, the illustration shows the 2. Guide the tether strap through the
being pulled out in order to secure child- MINI COOPER and the MINI COOPER S. mounting for the head restraint
restraint systems. There are two additional anchors for child- 3. Push the head restraint into its lower-
REPAIRS
restraint systems with tether straps. most position.
To lock the safety belt
1. Secure the child-restraint system with
the belt
2. Pull the belt strap all the way out
3. Allow the belt strap to retract and pull it
taut against the child-restraint system.
DATA
The safety belt is locked.
INDEX
3. Allow the belt strap to retract all the
way.
51
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
TRANSPORTING CHILDREN SAFELY
52
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
IGNITION LOCK STARTING THE ENGINE
OVERVIEW
To turn the key back to the 0 position or to Do not allow the engine to run in
remove it, first move the selector lever to enclosed spaces. Breathing the nox-
position P. ious exhaust gases can lead to uncon-
sciousness and death. The exhaust gases
Steering unlocked contain carbon monoxide, an odorless and
CONTROLS
Individual electrical accessories are ready colorless, but highly toxic gas.
for operation. Do not leave the vehicle unattended with
the engine running. This is a safety hazard.
You will find that it is often easier to turn
Before getting out of the vehicle with the
the ignition key from position 0 to
engine running, put the transmission in
position 1 when you move the steering
idle or position P, and apply the parking
OPERATION
wheel slightly to help disengage the lock.
brake. If you fail to do this, the vehicle
0 Steering locked could move.<
1 Steering unlocked
Ignition switched on
All electrical accessories are ready for oper- Do not let the engine warm up with the
2 Ignition switched on
ation. vehicle at a standstill. Move off immedi-
3 Starting the engine ately at a moderate engine speed.
Starting the engine
REPAIRS
Steering locked Vehicles with manual transmission: Do not stop the starting procedure
The key can be inserted or removed in this step on the clutch when starting the too early, and do not continue it for
position only. vehicle. A lockout prevents the engine from more than approx. 20 seconds. Release the
To lock the steering: starting if the clutch is not depressed.< ignition key immediately when the engine
starts.
1. Remove the key
Extended starting attempts, characterized
2. Turn the steering wheel slightly to the
DATA
by excessively frequent or long periods
left or right until the lock engages.
with the starter engaged, can lead to dam-
age in the catalytic converter.<
An alarm goes off if the key remains in the
ignition after opening the driver's door.
Interlock for automatic transmission with
INDEX
Steptronic:
53
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
STARTING THE ENGINE SWITCHING OFF THE ENGINE PARKING BRAKE
54
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
PARKING BRAKE MANUAL TRANSMISSION
OVERVIEW
force. Keep your thumb pressed against the Reverse gear
release button while pulling the lever up Before selecting reverse gear, ensure the
carefully. vehicle is stationary; then, fully depress the
Otherwise, excessive force could lead to clutch and pause briefly before moving the
overbraking and loss of traction, i.e. fish- gearshift lever into position.
CONTROLS
tailing, at the rear axle.<
5-speed transmission:
To avoid corrosion and one-sided Press the gearshift lever to the right and to
braking, apply the parking brake the back.
lightly from time to time when coasting to 6-speed transmission:
a standstill, for instance at a traffic light,
OPERATION
Press the gearshift lever towards the left.
provided that it is safe to do so. The brake Thereby overcome the slight resistance and
lamps do not come on when the parking 6-speed transmission*
press forward.
brake is engaged.< When shifting into 5th or 6th gear,
press the gearshift lever to the right.
Otherwise, the engine could be damaged
by accidentally engaging 3rd or 4th gear.<
REPAIRS
DATA
INDEX
55
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
AUTOMATIC TRANSMISSION WITH STEPTRONIC*
In addition to the fully automatic mode, If the engine speed is too high when
you can shift gears manually using Step- the vehicle is at a standstill, the selec-
tronic, refer to page 57. tor lever is also blocked to protect the
transmission.
Selector lever positions If the selector lever is not placed in
P R N D M/S + position P when the vehicle is parked, the
position display of the selector lever stays
on. This can lead to battery discharge.<
P Park
Select only when the vehicle is completely
stopped. The transmission locks to prevent
Range selection
the drive wheels from turning.
>The selector lever can be moved out of
position P when the ignition is switched R Reverse
on or the engine is running: interlock.
Select only when the vehicle is completely
>While the vehicle is stationary and stopped.
before shifting out of P or N, depress the
footbrake in order to disengage the N Neutral: idle
selector lever's lock mechanism: shift-
Select this when you are in a car wash, for
lock.
example. The vehicle can roll.
Keep your foot on the brake until start-
ing off, otherwise the vehicle will start D Drive: automatic driving position
to move when a drive position is
This position is designed for driving under
engaged.
all normal operating conditions.
A lock prevents the selector lever from acci-
Under normal operation conditions, fuel
dentally being moved to the R or P posi-
consumption is lowest when you drive in
tions. To override the lock, press the button
position D.
on the front of the selector lever knob, see
arrow.
56
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
AUTOMATIC TRANSMISSION WITH STEPTRONIC*
OVERVIEW
Kickdown
Kickdown can be used to achieve maxi-
mum vehicle performance.
Press the accelerator pedal past the
increased resistance point at the full-throt-
CONTROLS
tle position.
OPERATION
Available displays M/S + Manual mode and Sport
P R N D SD M1 to M6 EP program
Switch from D to M/S + :
Sport program is activated and SD appears
in the gear indicator in the speedometer.
REPAIRS
Press selector lever once:
This switches from the Sport program to
the manual mode.
DATA
downwards manually or by kickdown.<
INDEX
57
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
AUTOMATIC TRANSMISSION WITH STEPTRONIC*
Switching from M/S + Manual mode into In the MINI COOPER S, with the selec-
the selector lever positions P, R and N is tor lever in position D, automatic
only possible via D. mode, you can shift gears using the shift
paddles on the steering wheel. The trans-
Shifting with the selector lever mission automatically switches to manual
>Briefly press the selector lever in the + mode. If you do not shift gears with the
direction: shift paddles or accelerate for a certain
Transmission shifts up amount of time, the transmission auto-
>Briefly press the selector lever in the matically returns to automatic mode.<
direction:
Transmission shifts down. Malfunction
M1 to M6 appear in the gear indicator. EP appears on the display. The transmission
Shifting on the steering wheel*
system is malfunctioning. Avoid high loads.
The shift paddles allow the gears to be All selector lever positions can still be
changed rapidly and, above all, safely, since engaged; in the forward driving positions,
both hands can remain on the steering however, the vehicle can only be driven
wheel. with a limited gear selection.
To shift up or down with one of the two Have the system checked immediately.
shift paddles: Jump-starting and towing, refer to
>Pull the shift paddle: page 146 ff.
Transmission shifts up
>Press the shift paddle:
Transmission shifts down.
M1 to M6 appear in the gear indicator.
The transmission will execute only gear
changes that result in a plausible combina-
tion of vehicle speed and engine rpm, e.g. it
will not shift down if that would result in
excessive engine speed.
58
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
AUTOMATIC TRANSMISSION WITH STEPTRONIC*
OVERVIEW
CONTROLS
OPERATION
Overriding the selector lever lock
Should the selector lever remain stuck in
position P even when you press the button
on the selector lever, the selector lever lock
can be overridden:
REPAIRS
1. Pull the ring with the sleeve upward, see
arrows 1
2. Pull the sleeve up over the selector lever
so that the sleeve is inside out
3. Press release lever 2 forward in the
direction of travel while engaging the
desired position, such as N.
DATA
INDEX
59
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
PARKING LAMPS/LOW BEAMS
60
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
PARKING LAMPS/LOW BEAMS TURN SIGNAL INDICATOR/HEADLAMP FLASHER
OVERVIEW
periods of time; otherwise, you may not be
able to start the engine.<
CONTROLS
the ignition key is in position 0, an acoustic
signal sounds for a few seconds when you
open the driver's door to remind you that
the lights have not been switched off.
OPERATION
Daytime running lamps*
If convenient, the light switch can be left in 1 Turn signal indicators
position 2.
2 High beams/Headlamp flasher
When the ignition is switched off, the
external lights go out.
To signal briefly
You can have this function activated/ Gently push the lever up to the point of
REPAIRS
deactivated.< resistance and hold it there, if necessary.
DATA
INDEX
61
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
INSTRUMENT LIGHTING FOG LAMPS INTERIOR LAMPS
To control the instrument lighting, press With the parking lamps/low beams Switching the interior light in the MINI
the button. switched on: on and off manually
Briefly press the switch upward or down- Press button 1 briefly.
Brighter display ward.
Press the button until the desired bright- Tap it again to switch off. Permanently turn off interior light:
ness is achieved. Press button 1 until the interior light comes
Fog lamps* on for a short while.
Dimmer display The parking lamps or low beams Press button 1 to revert to normal opera-
Press the button briefly. must be on. The green LED in the tion.
With each brief pressing of the button, the switch lights up.
illumination is dimmed step by step. The fog lamps are on.
62
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
INTERIOR LAMPS WASHER/WIPER SYSTEM
OVERVIEW
windshield wipers are automatically con-
trolled depending on the amount of mois-
ture, including snow, on the windshield.
CONTROLS
Lever in position 1.
The wipers will move once across the wind-
shield.
To deactivate the rain sensor:
Lever in position 0.
OPERATION
Switching the interior light in the MINI 0 Wipers parked Switch the rain sensor off when pass-
Convertible on and off manually 1 Intermittent operation or rain sensor ing through an automatic car wash.
Press button 1 briefly. Failure to do so could result in damage
2 Normal wiper speed
caused by undesired wiper activation.<
Permanently turn off interior light: 3 Fast wiper speed
Press button 1 until the interior light comes 4 Brief wipe Normal wiper speed
REPAIRS
on for a short while. 5 Clean windshield and headlamps When the vehicle is stationary, the wipers
switch automatically to intermittent wip-
Press button 1 to revert to normal opera-
Intermittent operation ing.
tion.
Not on vehicles with rain sensor.
You can have this function activated/
Switching the reading lamps on and The interval time for the wipers is depen- deactivated.<
off
DATA
dent on the vehicle speed.
Press button 2. Fast wiper speed
Rain sensor*
When the vehicle is stationary, the wipers
The rain sensor is located on the wind- switch automatically to normal wiper
shield, directly in front of the interior rear- speed.
view mirror.
INDEX
When the rain sensor is activated, the
63
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
WASHER/WIPER SYSTEM WASHER FLUID
Do not use the washers if there is any Rear window wiper* Headlamp* and window washer
danger that the fluid will freeze on systems
6 Intermittent mode:
the windshield. For this reason, use anti-
Turn the cap to position 6. The capacity of the headlamp washer sys-
freeze, refer to page 65.
The rear window wiper moves across the tem is approx. 2.6 quarts/2.5 liters, that of
Do not use the washers if the fluid reservoir
window a number of times before the windshield and rear window washer
is empty, as the washer pump will other-
switching to intermittent operation system approx. 2.4 quarts/2.3 liters.
wise be damaged.<
Fill with water and, if necessary, with anti-
Cleaning the rear window* freeze, according to manufacturer's recom-
Heated windshield washer jets*
7 During intermittent mode: mendations.
The windshield washer jets are heated
Turn the cap to position 7 and keep it
automatically when the ignition key is in
there We recommend that you mix the
position 2.
8 Wipers in neutral position: washer fluid before filling either res-
Turn the cap to position 8 and keep it ervoir.<
there.
Antifreeze agent for the washer sys-
tems is flammable. Always keep it
well away from sparks and open flames,
and store it in tightly closed original con-
tainers well out of the reach of children.
64
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
WASHER FLUID CRUISE CONTROL*
OVERVIEW
Always observe the instructions on the con- On the multifunction sports steering
tainers.< wheel
Above approx. 20 mph / 30 km/h the cruise
control maintains and stores any desired
speed.
CONTROLS
Do not use cruise control when unfa-
vorable conditions make it inadvis-
able to drive at a constant speed. Other-
wise, the vehicle could go out of control
OPERATION
and an accident could be caused. Unfavor-
able conditions include, for example, twist-
Washer fluid level
ing roads, high traffic density, or adverse
The yellow LED in the wiper control lever road conditions such as snow, rain, ice, or
lights up when the washer fluid level is too loose surfaces.<
low.
In the following situations, the LED flashes
REPAIRS
for approx. 10 seconds when the washer
fluid level has dropped to a minimum:
>When cleaning the windshield and head-
lamps by pulling the wiper control lever
>When the ignition is switched on
>When starting the engine
DATA
INDEX
65
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
CRUISE CONTROL*
The system maintains and stores the cur- To cancel the cruise control
rent vehicle speed. Every time you tap the The cruise control is automatically can-
button, the speed increases by approx. celed:
1 mph / 2 km/h.
>When the brakes are applied
>When the clutch is depressed
Press and hold button 3.
>If the cruising speed is either exceeded or
The vehicle accelerates without pressure not met for an extended length of time,
on the accelerator pedal. When you release for example if you press the accelerator
the button, the system maintains and pedal and exceed the stored speed
stores the current speed. >When ASC or DSC is in action.
The indicator lamp stays lit.
If, on a downhill grade, the engine
To activate via the multifunction You can use the cruise control again as
braking effect is not sufficient, the
sports steering wheel required.
controlled speed can be exceeded. Speed
1. Start the engine can drop on uphill grades if the engine out- On the multifunction steering wheel, the
2. Press button 2. put is insufficient.< cruise control can be interrupted manually:
The indicator lamp in the instrument clus- When the system is activated, press
ter lights up. To maintain, store and decrease speed button 2.
Cruise control is active. Press button 4.
If you are already driving with active cruise To continue cruise control
To deactivate Press button 1.
control, the speed is decreased by approx.
Press button 2 repeatedly until the indica- 1 mph / 2 km/h every time you tap the but- The vehicle accelerates to and maintains
tor lamp goes out. ton. the last speed stored.
The cruise control is deactivated when the
ignition key is turned to position 0. Press and hold button 4.
The stored speed is cleared. With the cruise control active, the system
automatically reduces the throttle opening
To maintain, store and increase speed to slow the vehicle. When you release the
Press button 3. button, the system maintains and stores
the current speed.
66
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
ODOMETER CLOCK FUEL GAUGE
OVERVIEW
CONTROLS
OPERATION
1 Trip odometer/clock Setting In the speedometer or Cockpit Chrono
2 Odometer The clock must be shown on the display. Pack*
1. If necessary, press button 1 to display If the LED begins to be lit continuously,
Trip odometer/clock the clock there are approx. 2.1 gallons/8 liters of fuel
To switch between the trip odometer and 2. Press button 1 for approx. 5 seconds to left in the tank.
REPAIRS
the clock: activate the clock-setting mode Fuel tank capacity:
3. Press button 1 to select 12-hour or Approx. 13.2 gallons/50 liters.
Press the button.
24-hour mode When you switch on the ignition, the LED
To reset the trip odometer to zero: 4. Wait approx. 5 seconds until the hours lights up briefly to confirm that the system
Press the button until the trip odometer display is shown is operational.
shows zero. 5. Press button 1 to set the hour If the angle of the vehicle varies, for exam-
To set the clock, refer to the information 6. Wait approx. 5 seconds until the min- ple when you are driving in mountainous
DATA
below. utes display is shown areas, the needle may fluctuate slightly.
7. Press button 1 to set the minute.
Odometer The time entered is stored automatically Refill the gas tank early. If you drive
When the ignition key is not in the ignition after approx. 1 minute. to the last drop of fuel, engine func-
lock, you can activate the displays shown in tions are not guaranteed and damage can
INDEX
the illustration by pressing the button in occur.<
the display elements.
67
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
FUEL GAUGE COOLANT TEMPERATURE GAUGE
Temperature warning
LED 1 comes on while the vehicle is in
motion: engine is too hot. Switch off the
engine immediately and allow it to cool
down.
When you switch on the ignition, the LED 1
In the navigation system* Coolant temperature gauge lights up briefly to confirm that the system
Please also comply with the instruc- Depending on the equipment version, a is operational.
tions in the previous section.< coolant temperature gauge is located in
the speedometer or the Cockpit Chrono Equipment with navigation system* or
If the LED changes from orange to red, Pack. Cockpit Chrono Pack*
there are approx. 2.1 gallons/8 liters of fuel Coolant temperature warning
left in the tank. Low temperature: lamp 2 comes on while the vehicle
The engine is still cold. Drive at moderate is in motion: engine is too hot.
engine and vehicle speeds. Switch off the engine immediately and
allow it to cool down.
Center position:
Normal operating temperature of the
engine.
High temperature:
As soon as there is a deviation from the
center position upwards or to the left:
68
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
TACHOMETER SERVICE INTERVAL DISPLAY
OVERVIEW
The remaining distance is calculated on the
basis of the preceding driving style. The dis-
play counts backwards in steps of 35 miles/
50 km to the next service. A flashing mes-
sage and a minus sign in front of the dis-
CONTROLS
play that again begins counting forwards
mean that the service interval has been
exceeded.
Please schedule an appointment with your
MINI Dealer or a workshop that has spe-
cially trained personnel working in accor-
OPERATION
dance with the specifications of your MINI
Do not operate the engine with the needle Remaining distance for service manufacturer.
in the red overspeed zone of the gauge. With the ignition key in position 1 or For more information on the service inter-
To protect the engine, the power is reduced higher, the distance remaining before the val display, refer to page 125.
when you approach a certain engine speed next scheduled service is displayed in miles
in this sector. for a short period. The display also indicates
REPAIRS
whether an engine oil service and/or an
inspection is due.
DATA
INDEX
69
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
ONBOARD COMPUTER*
70
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
ONBOARD COMPUTER*
OVERVIEW
Average speed, average fuel
consumption
To reset average consumption, average
speed:
CONTROLS
Press the button in the turn signal indicator
lever for a long time.
The average consumption is determined
for the time during which the engine is run-
ning.
OPERATION
If the vehicle is equipped with a navi-
gation system, the displays are
shown in the area of the navigation sys-
tem.<
REPAIRS
Current fuel consumption
Shows the current fuel consumption. You
can check how economically and environ-
mentally friendly you are currently driving.
DATA
You can have a different unit of mea-
sure set.<
INDEX
71
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
DRIVING STABILITY CONTROL SYSTEMS
Your MINI or MINI Convertible is equipped tions, such as fishtailing or nose-diving. In Dynamic Stability Control (DSC)*
with a series of systems that help maintain these cases, and subject to physical limits, DSC prevents slip at the drive wheels while
driving stability even in adverse driving sit- ASC helps to keep the vehicle on a steady starting off and accelerating the vehicle.
uations. course by reducing engine speed and by DSC also recognizes unstable vehicle condi-
applying brakes at individual wheels. This tions, such as fishtailing or nose-diving. In
Antilock Brake System (ABS) system optimizes driving stability and trac- these cases, and subject to physical limits,
ABS keeps the wheels from locking during tion, especially when just starting off, DSC helps to keep the vehicle on a steady
braking. Steering stability is maintained when accelerating or when cornering. course by reducing engine speed and by
even during full brake applications. In this The ASC is operational each time you start applying brakes at individual wheels.
way, active safety is enhanced. the engine. It integrates the Antilock Brake The DSC is operational every time you start
ABS is operational each time the engine is System (ABS) and Electronic Brake Force the engine. It integrates All Season traction
started. Braking safely, refer to page 103. Distribution (EBD). Control (ASC).
Cornering Brake Control CBC The laws of physics cannot be The laws of physics cannot be
repealed, even with ASC. An appropri- repealed, even with DSC. An appro-
Driving stability and steering characteris-
ate driving style always remains the priate driving style always remains the
tics are further enhanced while braking in
responsibility of the driver. Avoid using the responsibility of the driver. Avoid using the
turns or during a lane change.
additional safety margin provided by the additional safety margin provided by the
system as an excuse for taking unnecessary system as an excuse for taking unnecessary
Electronic Brake Force Distribution risks.
(EBD) risks.
Do not make any modifications to the ASC Do not make any modifications to the DSC
The system controls brake-force applica- system. Allow only authorized technicians system. Allow only authorized technicians
tion at the rear wheels in order to obtain to perform service procedures on the to perform service procedures on the
increased stability in the vehicle's braking ASC.< DSC.<
response.
72
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
DRIVING STABILITY CONTROL SYSTEMS
OVERVIEW
Switching the ASC or DSC on again
Briefly press the switch once again.
The indicator lamp goes out.
Indicator lamp
CONTROLS
The indicator lamp will go out
shortly after the ignition has been
switched on, refer to pages 17, 18.
OPERATION
ASC or DSC is regulating drive torque and
Switching off the ASC or DSC braking forces.
Briefly press the switch. The indicator lamp lights up continuously:
The indicator lamp stays lit. the system is malfunctioning or has been
switched off at the button. Have the sys-
When driving with snow chains or to 'rock
tem checked as soon as possible.
free' in snow, it can be helpful to switch off
REPAIRS
the ASC/DSC for a brief period.
DATA
INDEX
73
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
FLAT TIRE MONITOR
74
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
FLAT TIRE MONITOR
OVERVIEW
Flat tire warning that the Flat Tire Monitor was not initial- Malfunction
The warning lamp lights up in yel- ized. In this case, initialize the system.< The warning lamp lights up in yel-
low. An acoustic signal also sounds. 3. If there is a total loss of tire inflation low. There is a malfunction in the
There is a flat tire or a significant pressure, 0 psi/0 kPa, or obvious tire Flat Tire Monitor or the system has
loss of pressure in a tire. damage, you can gauge the mileage for failed. Have the system checked as soon as
CONTROLS
1. Reduce speed and stop the vehicle with continued driving on the basis of the fol- possible.
caution. Avoid hard brake applications lowing indications:
and steering maneuvers. >With a light load:
2. Determine which tire is damaged. 1 to 2 persons without luggage:
approx. 155 miles/250 km
If this cannot be determined, con-
OPERATION
>With a medium load:
tact your MINI Dealer.<
2 persons, luggage compartment full,
3. Repair the flat tire, refer to page 137. or 4 persons without luggage:
Vehicles with Run-Flat Tires: approx. 90 miles/150 km
1. Reduce vehicle speed carefully to under >With a full load:
50 mph / 80 km/h. Avoid hard brake 4 or more persons, luggage compart-
applications and steering maneuvers. Do ment full:
REPAIRS
not exceed a speed of 50 mph / approx. 30 miles/50 km.
80 km/h.
Drive cautiously. Do not exceed a
Do not continue driving if the vehi- speed of 50 mph / 80 km/h. In case of
cle is not equipped with Run-Flat tire pressure loss you must expect changes
Tires, refer to page 115. If you continue in vehicle handling such as lower track sta-
to drive with a flat tire, a serious acci- bility during braking, longer braking dis-
DATA
dent could result.< tances and changes in self-steering proper-
2. Check the tire inflation pressure in all ties when close to the handling limit.
four tires at the earliest opportunity. For safety reasons, the manufacturer of
If the tire inflation pressure is cor- your MINI recommends not having dam-
rect in all four tires, it is possible aged Run-Flat Tires repaired, but to consult
INDEX
a MINI Dealer in such cases.<
75
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
TIRE PRESSURE MONITOR*
76
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
TIRE PRESSURE MONITOR*
OVERVIEW
Message for low tire inflation pressure Vehicles with Run Flat tires: 4 persons without luggage:
The warning lamp lights up in yel- 1. Reduce vehicle speed carefully to under approx. 90 miles/150 km
low. An acoustic signal also sounds. 50 mph / 80 km/h. Avoid hard brake >With a full load:
A flat tire or a severe loss in pres- applications and steering maneuvers. 4 or more persons, luggage compart-
sure has occurred in one or more tires. Do not exceed a speed of 50 mph / ment full:
CONTROLS
80 km/h. ca. 30 miles/50 km.
1. Reduce speed and stop the vehicle with
caution. Avoid hard brake applications Do not continue driving if the vehi-
Drive cautiously. Do not exceed a
and steering maneuvers. cle is not equipped with Run Flat
speed of 50 mph / 80 km/h. In case of
2. Identify the damaged wheel or wheels. tires, refer to page 115. If you continue
tire pressure loss you must expect changes
If this cannot be determined, con- to drive with a flat tire, a serious acci-
in vehicle handling such as lower track sta-
OPERATION
tact your MINI Dealer.< dent could result.<
bility during braking, longer braking dis-
3. Replace the damaged wheel, refer to 2. Check the tire inflation pressure in all tances and changes in self-steering proper-
Wheel change on page 139. four tires at the earliest opportunity. ties when close to the handling limit.
4. Check the tire inflation pressure and cor- If the tire inflation pressure is cor- For safety reasons, the manufacturer of
rect it if necessary. rect in all four tires, it is possible your MINI recommends not having dam-
The compact wheel is not equipped with that the Tire Pressure Monitor was not aged Run Flat tires repaired, but to consult
REPAIRS
the necessary TPM electronics and is not initialized. In this case, initialize the sys- a MINI Dealer in such cases.<
monitored after it is mounted. When driv- tem.<
ing with a compact wheel, the system indi- 3. If there is a total loss of tire inflation Malfunction
cates that a malfunction is occurring. pressure, 0 psi/0 kPa, or obvious tire The yellow warning lamp flashes
damage, you can gauge the mileage for and then lights up permanently.
continued driving on the basis of the fol- No punctures can be detected.
lowing indications: This type of message is shown in the fol-
DATA
>With a light load: lowing situations:
1 to 2 persons without luggage:
>If there is a malfunction
approx. 155 miles/250 km
Have the system checked.
>With a medium load:
>If a wheel without TPM electronics is
2 persons, luggage compartment full, or
mounted, e.g. a compact wheel.
INDEX
77
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
TIRE PRESSURE MONITOR*
>If TPM is temporarily malfunctioning due Declaration according to NHTSA/ has not reached the level at which the
to other systems or devices using the FMVSS 138 Tire Pressure Monitoring TPMS low tire pressure telltale illuminates.
same radio frequency. System The TPMS malfunction indicator is com-
Each tire should be checked monthly when bined with the low tire pressure telltale.
cold and inflated to the inflation pressure When the system detects a malfunction,
recommended by the vehicle manufacturer the telltale will flash for approximately one
on the vehicle placard or tire inflation pres- minute and then remain continuously lit.
sure label. If your vehicle has tires of a dif- This sequence will continue upon subse-
ferent size than the size indicated on the quent vehicle startups as long as the mal-
vehicle placard or tire inflation pressure function exists. When the malfunction
label, you should determine the proper tire indicator is illuminated, the system may
inflation pressure for those tires. As an not be able to detect or signal low tire pres-
added safety feature, your vehicle has been sure as intended. TPMS malfunctions may
equipped with a tire pressure monitoring occur for a variety of reasons, including the
system, TPMS, that illuminates a low tire installation of replacement or alternate
pressure telltale when one or more of your tires or wheels on the vehicle that prevent
tires are significantly under-inflated. the TPMS from functioning properly.
Accordingly, when the low tire pressure Always check the TPMS malfunction tell-
telltale illuminates, you should stop and tale after replacing one or more tires or
check your tires as soon as possible, and wheels on your vehicle to ensure that the
inflate them to the proper pressure. Driving replacement or alternate tires and wheels
on a significantly underinflated tire causes allow the TPMS to continue to function
the tire to overheat and can lead to tire fail- properly.
ure. Underinflation also reduces fuel effi-
ciency and tire tread life, and may affect
the vehicle's handling and stopping ability.
Please note that the TPMS is not a substi-
tute for proper tire maintenance, and it is
the driver's responsibility to maintain cor-
rect tire pressure, even if underinflation
78
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
AIRBAGS
OVERVIEW
The front airbags supplement the safety after the system has been triggered; other-
belts by providing additional protection for wise there is a danger of burns. In the event
the driver and front passenger in the event of malfunctions, deactivation or deploy-
of a frontal collision in which the protec- ment of the airbag restraint system, have
tion afforded by the belts alone may no the system checked, repaired or disassem-
CONTROLS
longer be sufficient. When needed, the bled only by a MINI Dealer or a workshop
head and side airbags help to furnish pro- with specially trained personnel working in
tection in the event of side impact. Each of accordance with the specifications of the
the side airbags is designed to help support MINI manufacturer and having the neces-
the seat occupant's upper body. The corre- sary permits for handling explosive devices.
sponding side/head airbag in the MINI Con- Unprofessional attempts to service the sys-
OPERATION
vertible or the head airbag in the MINI sup- tem could lead to failure in an emergency
The following airbags are located under the ports the head. or undesired airbag activation, either of
marked covers: which could result in personal injury.<
The airbags are designed to not be trig-
gered in certain types of collisions, e.g. not
MINI in minor accidents or rear impacts. Warning notices and information regard-
1 Side airbags in the backrests ing airbags can also be found on the sun
For information on the ideal seating posi-
REPAIRS
2 Head airbags visors.
tion, refer to page 42.
3 Front airbags
Automatic deactivation of the front
Do not apply adhesive materials to
passenger airbags
MINI Convertible the cover panels of the airbags, cover
them or modify them in any other way. Do An analysis of the impression in the front
1 Side/head airbags in the backrests passenger seat cushion determines
not fit covers, cushions or other items to
3 Front airbags the front seats that have not been specially whether and how the seat is occupied. The
DATA
approved for seats with integrated side air- system correspondingly activates or deacti-
Protective effect bags. Do not hang clothing, e.g. jackets, vates the front and side airbags for the
Comply with the instructions on over the backrests. front passenger.
page 42, or the occupants' personal Do not attempt to remove the airbag
safety will be diminished.< restraint system from the vehicle. Do not The indicator lamp above the interior
INDEX
touch the individual components directly rearview mirror shows the current
status of the front passenger airbags, deac-
79
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
AIRBAGS
tivated or activated, refer to Functional sta- The front and side airbags for the front
tus of the front passenger airbags below. < passenger are not activated.
>The indicator lamp does not come on
Before transporting a child on the when the system detects a person of suf-
front passenger seat, read the safety ficient size sitting correctly on the seat,
notes and instructions under Transporting for example. The front and side airbags
children safely, refer to page 50. for the front passenger are activated.
Adolescents and adults sitting in certain >The indicator lamp does not come on
positions could also deactivate the front when the seat is empty. However, the
and side airbags for the front passenger; front and side airbags for the front pas-
the indicator lamp for the front passenger senger are not activated.
airbags comes on. In such cases, the occu-
pant should change his or her sitting posi- Functional status of the front Operational readiness of the airbag
tion so that the front passenger airbags are passenger airbags system
activated and the indicator lamp goes out. As an example, the illustration shows the Starting from ignition key
If the airbags are not activated although indicator lamp for front passenger airbags position 1, the warning lamp in the
the seat occupant has changed his or her in the MINI Convertible. display elements lights up briefly
position, have the occupant sit on a rear In accordance with whether and how the for confirmation that the entire airbag sys-
seat. Do not attach covers, cushions, ball front passenger seat is occupied, the indi- tem and the seat belt tensioners are opera-
mats or other items to the front passenger cator lamp for the front passenger airbags tional.
seat unless they are specifically recom- shows the functional status of the front
mended by the manufacturer of your MINI. and side airbags for the front passenger. Airbag system malfunctioning
Do not place any objects under the seat The indicator lamp shows whether the >The warning lamp does not come on
which could press against the seat from front passenger airbags are activated or along with ignition key position 1
below. Otherwise, a correct analysis of the deactivated. >The warning lamp stays lit continuously.
seat cushion is not ensured.<
>The indicator lamp comes on as intended
when a child in a specially designated In the event of a malfunction, have
child-restraint system is detected on the the airbag system checked immedi-
front passenger's seat. ately. Otherwise, there is a risk that the sys-
tem will not function as intended in an
accident of sufficient severity.<
80
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
PARK DISTANCE CONTROL (PDC)*
OVERVIEW
The concept You can have a signal tone set as a System limitations
The PDC assists you when you back into a confirmation that PDC has been acti- Even with PDC, final responsibility for
parking space. A signal tone tells you the vated.< estimating the distance between the
current distance to an object behind your vehicle and any objects always remains
vehicle. To do this, four ultrasonic sensors Acoustical signals with the driver.
CONTROLS
in the rear bumper measure the distance to The distance to an object is indicated by a Even when sensors are involved, there is a
the nearest object. tone sounding at intervals. As the distance blind spot in which objects cannot be
The sensors on each side have a range of between vehicle and object decreases, the detected. Recognition of some objects can
approx. 2 ft/60 cm, the middle sensors one intervals between the tones become be beyond the limits of physical ultrasonic
of approx. 5 ft/1.5 m. shorter. A continuous tone indicates the measurement, for example with towing
OPERATION
presence of an object less than 12 in/30 cm bars or hitches or with thin or wedge-
PDC is a parking aid that can identify away. shaped objects. It is also possible that low
objects if they are approached slowly, The warning signal is canceled after objects already detected, such as a curb
as is generally the case when parking. approx. three seconds if the distance to the edge, can disappear in the blind spot of the
Avoid driving towards objects rapidly; due object remains constant during this time, sensors before a continuous tone is
to underlying physical principles, the sys- for instance if you are moving parallel to a sounded, or that protruding objects higher
tem may otherwise alert you too late for wall. above the ground, such as ledges, are not
REPAIRS
you to take evasive steps.< detected.
Malfunction Loud sources of sound outside and inside
Automatic function your vehicle can drown the PDC signal
A continuous high-pitched tone will sound
With the ignition key in position 2, the sys- during initial activation. The system is mal- tone.<
tem starts to operate automatically about functioning. Have the system checked.
one second after you select reverse gear or Keep the sensors clean and free of ice
place the selector lever in position R. or snow in order to ensure that they
DATA
Volume control will continue to operate effectively.
The volume of the Park Distance Control Do not apply high pressure spray to the
Wait for this one second before you
signal can be adjusted from level 1, soft, to sensors for a prolonged period of time.
drive backwards.<
level 6, loud. Always maintain a distance which is
The system is deactivated when you shift greater than 4 in/10 cm.<
You can have this function set.<
INDEX
away from Reverse.
81
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
AIR CONDITIONING SYSTEM
1 Air onto the windshield and onto the 4 Temperature 83 8 Air distribution 83
side windows 5 Windshield heating* 83 9 Recirculated air mode 83
2 Air for the upper body area 84 6 Air volume/Blower 83 10 Rear window defroster 83
3 Air for the front and rear footwells 7 Cooling function 83
82
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
AIR CONDITIONING SYSTEM
OVERVIEW
Air volume/Blower Rear window defroster Recirculated air mode
You can select blower speeds The LED is lit when the rear win- The LED is lit when the recircu-
from 1 to 4. Position 0: blower is dow defroster is on. lated air mode is on. Supply of
switched off. The heater switches off auto- outside air into the vehicle is
matically after a short time. blocked.
CONTROLS
The heating, ventilation and air
conditioning operate in position 1 or The air within the vehicle is recirculated.
higher. Windshield heating*
The LED is lit when the wind- If the windows fog up in the recircu-
Temperature shield heating is on. lated air mode, turn the recirculated
The windshield heating switches air mode off and, if necessary, increase the
Turn to the right, red, to increase
OPERATION
off automatically after a short time. air supply. The recirculated air mode should
the temperature.
not be used constantly over a longer period
Turn to the left, blue, to decrease
Cooling function of time; otherwise the air quality in the
the temperature.
vehicle's interior will gradually deterio-
The LED is lit when the cooling
rate.<
Air distribution function is on.
Air distribution towards upper The air is cooled and dehumidi-
fied and, depending on the temperature
REPAIRS
body region , upper body
region and footwell , footwell setting, rewarmed.
, footwell and windows , Depending on the weather, the windshield
and windows . can fog up temporarily after the engine is
started.
Intermediate positions are possible, refer to
illustration and overview on page 82.
When the cooling function is on, con-
DATA
densation forms which then exits
under the vehicle. Traces of condensed
water on the ground are therefore nor-
mal.<
INDEX
83
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
AIR CONDITIONING SYSTEM
Microfilter
The integrated microfilter removes dust
and pollen from the incoming or recircu-
lated air.
Your MINI Dealer will replace it during rou-
tine maintenance. A substantial reduction
in the air supply indicates that the filter
must be replaced before scheduled mainte-
nance.
84
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
AUTOMATIC CLIMATE CONTROL*
OVERVIEW
CONTROLS
OPERATION
REPAIRS
1 Air onto the windshield and onto the 5 Interior temperature sensor, please keep 10 Temperature 86
side windows clear and unobstructed 11 Display for air temperature and air
DATA
2 Air for the upper body area 87 6 Recirculated air mode 86 volume 86
3 Air for the front and rear footwells 7 Cooling function 86 12 Air volume/Blower, switching air con-
4 Rear window defroster and windshield 8 Automatic air distribution and ditioner on/off 86
heating* 86 volume 86 13 Individual air distribution 87
INDEX
9 Defrosting and demisting the windshield
and side windows 87
85
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
AUTOMATIC CLIMATE CONTROL*
Automatic air distribution and volume Cooling function The recirculated air mode should not
The LED is lit when the AUTO pro- The LED is lit when the cooling be used constantly over a longer
gram is on. function is on. period of time; otherwise the air quality in
Automatic adjustment of the air distribu- The air is cooled and dehumidified and, the vehicle's interior will gradually deterio-
tion and volume, and adaptation of the depending on the temperature setting, rate. If the windows fog up in the recircu-
specified temperatures to external influ- rewarmed. lated air mode, turn the recirculated air
ences, e.g. outside temperature and insola- mode off and, if necessary, increase the air
The cooling function is automatically acti-
tion. supply.<
vated in the AUTO program.
In the automatic program (AUTO), the air
Rear window defroster and windshield
conditioning is activated automatically. To Depending on the weather, the windshield
heating*
create a pleasant air climate, the air tem- can fog up temporarily after the engine is
perature coming from the vents in the started. The LED comes on when the rear
upper body area is lower than the air tem- window/windshield heating is on.
perature in the footwell. When the air conditioning is on, con- The heater switches off automatically after
densation is formed which then exits a short time.
Air volume/Blower under the vehicle. Traces of condensed
Switching automatic climate control water on the ground are therefore nor- Temperature
off/on mal.< Tap or turn the wheel in the
Press the left or right half of the appropriate direction to change
button to vary the air volume. Recirculated air mode the temperature step by step.
Automatic adjustment of the air volume is The LED is lit when the recirculated The figures in the display provide
deactivated. air mode is on. Supply of outside air a general indication of interior tempera-
Switching air conditioner on/off. into the vehicle is blocked. ture. When you start the vehicle, the sys-
Press the left half of the button while the The air within the vehicle is recirculated. tem ensures that the selected temperature
blower is at the lowest setting. The blower, In the automatic program (AUTO) in hot is achieved as quickly as possible and then
heating and air conditioning are switched weather conditions, the recirculated air maintained.
off. All displays go out. mode is activated temporarily to enable
faster cooling. Permanent heating with maximum
Switch the automatic climate control back
The LED for the recirculated air button is power output at temperature selec-
on by pressing any button.
not lit. tion HI. Permanent cooling at LO. With the
86
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
AUTOMATIC CLIMATE CONTROL*
OVERVIEW
setting at HI, the recirculated air mode can- You can switch the unit from 6 to
not be switched on.< 7 by pressing the buttons for the
cooling function and air distribution
Defrosting and demisting windows toward the footwell at the same time.<
The LED is lit when the function is
CONTROLS
on. Microfilter/Activated-charcoal filter
Ice and condensation are rapidly removed The microfilter removes dust and pollen
from the rear window, windshield and side from the incoming or recirculated air. The
windows. activated-charcoal filter provides addi-
Condensation is removed from the win- tional protection by filtering gaseous pol-
OPERATION
dows more quickly when the cooling func- lutants from the outside air.
tion is also activated. Your MINI Dealer replaces this combined
Draft-free ventilation
filter as a standard part of your scheduled
The rear window defroster/windshield Button 1: air outlets can be opened and
maintenance. A substantial reduction in
heating are switched on automatically. closed by turning.
the air supply indicates that the filter must
They can be switched off again via the The points indicate the position in each
be replaced before scheduled maintenance.
respective button. case.
REPAIRS
Nozzle 2: change the direction of the air
Individual air distribution flow by swiveling.
Combine the air distribution your-
self. Automatic adjustment of the
air distribution is deactivated.
It is not possible to distribute air
simultaneously toward the win-
DATA
dows and toward the upper body area.
INDEX
87
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
GLOVE COMPARTMENT
88
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
CENTER ARMREST* DRINKS HOLDERS, ASHTRAY
OVERVIEW
CONTROLS
OPERATION
Storage compartments Beverage holders
Depending on the equipment version*, the Beverage holders are at the front or top of
center armrest between the front seats the center console. Another is located at
contains a compartment or a base plate for the end of the center console in the rear.
a mobile phone.
REPAIRS
Do not place any glass containers in
To open: the beverage holders, as this
Slide the cover backwards. increases the risk of injury in the event of
an accident.<
The cover slides along guide rails and
can be opened fully by pushing it Ashtray
back and lifting it slightly.< The ashtray is located in one of the bever-
DATA
age holders in the center console.
To close:
Push the cover forwards.
INDEX
89
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
CIGARETTE LIGHTER, 12 V POWER SUPPLY
90
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
INTEGRATED UNIVERSAL REMOTE CONTROL*
OVERVIEW
The concept Checking compatibility
The integrated universal remote control If this symbol is shown on the pack-
takes the place of up to three different con- aging or in the operating instruc-
trol devices for different radio-remote-con- tions of the original control device,
trolled systems such as gate openers and it is safe to assume that the remote-con-
CONTROLS
household alarm systems. The integrated trolled system is compatible with the inte-
universal remote control detects and learns grated universal remote control.
the signal transmitted by the original con-
trol device. If you have any additional question,
The signal of an original control device can please contact your MINI Dealer or
OPERATION
be programmed onto one of the three call: 1-800-355-3515.
memory buttons 1. The system in question You can find more information on the Programming
can then be operated by means of the pro- Internet at:
www.miniusa.com or 1 Memory buttons
grammed memory button 1. Signal trans-
www.homelink.com. 2 LED
mission is indicated by LED 2.
HomeLink is a registered trademark of
If you decide to sell your vehicle one day, in Fixed-code control device
Johnson Controls, Inc.<
the interest of your own security, remem-
REPAIRS
1. Switch on the ignition
ber to delete the programs before the vehi-
2. For first-time start-up: press both outer
cle leaves your possession, refer to page 92.
buttons 1 for approx. 20 seconds until
LED 2 flashes. This clears all three mem-
While programming is in progress
ory buttons 1
and before operating any pro-
3. Hold the original control device approx.
grammed system by remote control using
2 to 8 in/5 to 20 cm away from memory
DATA
the integrated universal remote control,
buttons 1.
make sure that the movement area of the
system in question is clear of people, ani- The required distance between the
mals and inanimate obstructions, in order control device and memory
to avoid possible injury or damage. Also buttons 1 may vary, depending on the
comply with the safety precautions issued system of the original control device in
INDEX
for the original control device.< question.<
91
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
INTEGRATED UNIVERSAL REMOTE CONTROL*
4. Simultaneously press the command but- control device is equipped with an alternat- step 4, you have approx. 30 seconds to
ton of the original control device and the ing-code system. In this case, the memory complete step 5
desired memory button 1 on the inte- buttons 1 are programmed as described for 5. Press the programmed memory
grated universal remote control. The LED an alternating-code control device.< button 1 of the integrated universal
2 begins to flash slowly. Release both remote control three times.
buttons when LED 2 starts flashing rap- Alternating-code control device The corresponding memory button 1 is
idly. If LED 2 does not start to flash rap- You will need to refer to the operating now programmed with the signal of the
idly after approx. 15 seconds, change the instructions of the system in question in original control device.
distance between the two devices order to program the integrated universal
5. Repeat steps 3 and 4 to program other remote control. Read through the operat- Consult your MINI Dealer if you have
original control devices. ing instructions for information on syn- any questions.<
The corresponding memory button 1 is chronization.
now programmed with the signal of the Observe the following additional instruc- Deleting memory buttons
original control device. tions when you program an alternating- Press both outer buttons 1 for approx.
You can operate the system with the igni- code control device: 20 seconds until LED 2 flashes: all memory
tion key in position 2 or 3. buttons are cleared.
You will find programming easier if
It is not possible to delete individual mem-
If the system cannot be operated you have the assistance of a second
ory buttons 1.
after repeated attempts at program- person.<
ming, check whether the original control
device is equipped with an alternating- 1. Park your vehicle within range of the
code system. You can either check the oper- radio-remote-controlled device
ating instructions of the original control 2. Program the integrated universal
device for this information, or you can remote control as described above in the
press and hold down the programmed section on fixed-code programming
memory button 1 of the integrated univer- 3. Locate the button on the receiver of the
sal remote control. If LED 2 of the inte- target device, for example on the upper
grated universal remote control flashes part of the drive
rapidly for a brief period and then remains 4. Press the button on the receiver of the
on for approx. two seconds, the original target device. Once you have completed
92
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
LUGGAGE COMPARTMENT IN THE MINI
OVERVIEW
Luggage compartment cover
When the tailgate is opened, the luggage
compartment cover is also raised.
CONTROLS
on the luggage compartment cover;
otherwise occupants could be injured dur-
ing braking maneuvers.<
OPERATION
Removal Foldable rear backrest
To load bulky luggage, the compartment 1. Pull lever
cover can be removed. 2. Fold the rear backrest forwards.
1. Remove the retaining straps on the tail-
gate When folding the backrest back into
REPAIRS
2. Pull the luggage compartment cover out its original position, always ensure
towards the rear. that the catch engages securely. A loose
backrest might fail to prevent cargo from
entering the passenger compartment dur-
ing sudden braking or evasive maneuvers,
posing a potential hazard to occupants.<
DATA
INDEX
93
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
LUGGAGE COMPARTMENT IN THE MINI CONVERTIBLE
94
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
LUGGAGE COMPARTMENT IN THE MINI CONVERTIBLE LOADING CARGO
OVERVIEW
Avoid overloading the vehicle so that
the permissible carrying capacity of
the tires is not exceeded. Overloading can
lead to overheating and damage inside the
tires. Depending on the circumstances, this
CONTROLS
can result in sudden air loss.<
OPERATION
2. Pull the lever to release the catch
3. Fold the backrest forward.
REPAIRS
backrest might fail to prevent cargo from
entering the passenger compartment dur-
ing sudden braking or evasive maneuvers,
posing a potential hazard to occupants.<
DATA
INDEX
95
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
LOADING CARGO
96
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
LOADING CARGO
OVERVIEW
CONTROLS
OPERATION
Stowing cargo For very heavy cargo when the rear seat is Securing the load
>Place heavy cargo as far forward as possi- unoccupied, fasten each safety belt in the As an example, the illustration shows the
ble, directly behind the backrests, and as opposite buckle. This provides additional luggage compartment of the MINI.
low as possible stabilization for the backrests.
>Secure smaller and lighter items using
>Cover sharp edges and corners the luggage compartment net* or elas-
>Do not pile objects higher than the top
REPAIRS
tic straps
edges of the backrests. >Secure larger and heavier items with
load-securing devices*. Lashing eyelets
are provided at the inner corners of the
luggage compartment for attaching
these load-securing devices.
Comply with the information enclosed
DATA
with the load-securing devices.
INDEX
97
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
LOADING CARGO ROOF-MOUNTED LUGGAGE RACK*
Always position and secure the load When loading a roof-mounted lug-
as described above. If you do not, it gage rack on the MINI, make sure
can pose a danger to the passengers during that there is sufficient space for the move-
braking and evasive maneuvers, for exam- ment of the glass sunroof and that no
ple. objects protrude into the swiveling area of
Do not exceed the permissible gross weight the tailgate; otherwise damage can occur.
and axle load, refer to page 155 ff; other- Do not secure the roof-mounted luggage
wise the vehicle's operating safety is no rack to the MINI's trim strips or to the MINI
longer assured and it will not be in compli- Convertible top. Otherwise, the lack of a
ance with the certification regulations. secure hold could lead to damage or acci-
Do not stow heavy or hard objects in the dents.<
passenger compartment without first
securing them. Otherwise they would be Special roof-mounted luggage racks
thrown around during braking and evasive for your MINI are available as acces-
maneuvers and endanger the occupants.< sories from your MINI Dealer.<
98
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
OVERVIEW
CONTROLS
OPERATION
REPAIRS
DATA
INDEX
99
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
100
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
OVERVIEW
OVERVIEW
CONTROLS
CONTROLS
OPERATION
OPERATION, CARE, MAINTENANCE
REPAIRS
OWNER SERVICE PROCEDURES
DATA
TECHNICAL DATA
INDEX
INDEX
Operation 101
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
BREAK-IN PROCEDURES GENERAL DRIVING NOTES
102
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
GENERAL DRIVING NOTES
OVERVIEW
Safe braking sure on the brake can lead to high tempera- pads to clean the rotors by brake applica-
Your vehicle is equipped with ABS as a stan- tures, brake wear and possibly even brake tions is not reached.
dard feature. If you are in a situation which failure.< Corrosion on brake rotors is signaled by a
requires full braking, it is best to brake running or pulsation during braking; even
using maximum brake pressure. Since the The braking effect of the engine can be extended subsequent braking will not cure
CONTROLS
vehicle remains maneuverable, you can still increased by downshifting in the manual this phenomenon.
go around any obstacles with the smallest mode of the automatic transmission, to
possible steering movements. first gear if necessary, refer to page 58. This Brake pads
protects the brakes from excessive loads.
The pulsation of the brake pedal, together Sensors in the left front and right
with the sound of hydraulic regulation, rear brake pads monitor pad condi-
Do not coast with the clutch
OPERATION
indicates to you that ABS is actively taking tion. When the brake pads have
depressed, the transmission in idle or
effect. worn to the permissible limit, this is indi-
the engine switched off. Otherwise, the
cated by the brake wear warning light,
engine provides no braking effect, and
Wet roads: refer to page 18.
there is no power-assist for braking or
It is a good idea to periodically dry the steering.
brakes with a gentle application when driv- Make sure that there are no floor mats, Hydroplaning
ing in rain and on wet roads. Monitor traffic floor carpets or other objects in the vicinity When driving on wet or slushy roads,
REPAIRS
conditions to ensure that this maneuver of the pedals; otherwise pedal function reduce road speed. If you do not, a
does not hinder other road users. The could be impeded.< wedge of water can form between tires
resulting heat dries brake rotors and pads. and road surface. This phenomenon is char-
Then if the braking force is needed, it is Corrosion on the brake rotors: acterized by a partial or complete loss of
immediately available. contact between the tires and the road sur-
When the vehicle is driven only occasion-
face. The ultimate results are loss of steer-
ally, during extended periods when the
DATA
Driving downhill: ing and braking control.<
vehicle is not used at all, and in operating
To prevent overheating and the conditions where brake applications are
resulting reduced efficiency of the less frequent, there is an increased ten-
brake system, drive down extended or dency for corrosion of the brake rotors and
steep mountain gradients in the gear accumulation of contamination on the
which requires the least brake applications. brake pads. This occurs because the mini-
INDEX
Otherwise, even light but consistent pres- mal pressure that must be exerted by the
103
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
GENERAL DRIVING NOTES
104
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
REFUELING
OVERVIEW
Observe the following when refueling US models only:
Always observe all safety precautions The warning lamp* comes on.
posted at the service station when The gas cap is not correctly closed
handling fuel.< or missing. Check if the gas cap is
correctly closed.
CONTROLS
When refueling, insert the filler nozzle
completely into the filler pipe. Pulling the Fuel tank volume
nozzle out of the pipe during refueling: Approx. 13.2 gallons/50 liters, of which
>Results in premature pump shutoff approx. 2.1 gallons/8 liters are reserve
>Will reduce the effect of the fuel vapor capacity.
OPERATION
recovery system on the pump.
Always switch off the engine before As long as the filler nozzle is used properly, Do not drive until the fuel tank is
refueling; otherwise no fuel can be the fuel tank is full whenever the nozzle totally empty. Otherwise engine
added to the tank and the SERVICE ENGINE shuts off the first time. operations are not guaranteed and damage
SOON lamp may come on.< could occur.<
Closing the gas cap
1. Open the fuel filler door Fuel quality
REPAIRS
1. Insert gas cap
2. Turn the gas cap counterclockwise 2. Turn gas cap clockwise until it clicks Do not fill the tank with leaded gaso-
3. Put the gas cap in the bracket attached 3. Close fuel filler door. line; otherwise the catalytic con-
to the fuel filler door. verter will be permanently damaged. Do
Insert the cap and turn it clockwise not fill the tank with E85, i.e. fuel contain-
Always observe all applicable precau- until it audibly clicks. ing 85 % ethanol, nor with flex fuel. Other-
tionary measures and regulations Do not jam the strap between the gas cap wise the engine and fuel supply system will
DATA
when handling fuels. Do not carry any and the vehicle. The following message is be damaged.<
spare fuel containers in the vehicle. They displayed if the cap is loose or missing.<
can leak and cause an explosion or fire in Required fuel
the event of an accident.< Super Premium gasoline/AKI 91
INDEX
105
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
REFUELING
106
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
REFUELING
OVERVIEW
CONTROLS
OPERATION
Manual release with the MINI
Convertible
In the event of an electrical malfunction,
the fuel filler door can be unlocked manu-
ally.
REPAIRS
1. Remove the cover of the side trim panel
on the left-hand side, see arrow 1
2. Pull the green strap toward the rear, see
arrow 2.
The fuel filler door is released
3. Open the fuel filler door.
DATA
INDEX
107
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
TIRE INFLATION PRESSURE
108
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
TIRE INFLATION PRESSURE
OVERVIEW
Model Tire size Pressures specified in psi/kPa
All pressure specifications in the table are
indicated in psi/kilopascal with cold tires.
Cold = ambient temperature
CONTROLS
Traveling speeds up to 100 mph/ above 100 mph/
160 km/h 160 km/h
175/65 R 15 84 H M+S A/S
175/65 R 15 84 H
OPERATION
195/55 R 16 87 V M+S A/S
195/55 R 16 87 H M+S A/S, Convertible only 30/210 30/210 30/210 30/210 35/240 35/240
195/55 R 16 87 H
MINI COOPER/ 205/45 R 17 84 V M+S A/S
MINI COOPER 205/45 R 17 84 V
Convertible 175/60 R 15 84 H M+S
REPAIRS
175/60 R 16 82 H M+S
195/55 R 16 87 H M+S 33/230 33/230 33/230 33/230 38/260 38/260
205/45 R 17 84 V M+S
205/40 R 18 82 W
Space-saver spare tire: T 115/70 R 15 90 M 61/420 61/420 61/420 61/420 - -
DATA
INDEX
109
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
TIRE INFLATION PRESSURE
110
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
TIRE INFLATION PRESSURE
OVERVIEW
Model Tire size Pressures specified in psi/kPa
All pressure specifications in the table are
indicated in psi/kilopascal with cold tires.
Cold = ambient temperature
CONTROLS
Traveling speeds up to 100 mph/ above 100 mph/
160 km/h 160 km/h
195/55 R 16 87 V M+S A/S
30/210 30/210 30/210 30/210 35/240 35/240
OPERATION
195/55 R 16 87 V
195/55 R 16 87 H M+S 33/230 33/230 33/230 33/230 38/260 38/260
MINI COOPER S 205/45 R 17 84 V M+S A/S
Convertible 205/45 R 17 84 V M+S 35/240 35/240 35/240 35/240 38/260 38/260
205/45 R 17 84 V
175/60 R 16 82 H M+S
36/250 36/250 36/250 36/250 41/280 41/280
REPAIRS
205/40 R 18 82 W
195/55 R 16 87 V M+S A/S
32/220 32/220 32/220 32/220 35/240 35/240
195/55 R 16 87 V
MINI COOPER S 195/55 R 16 87 H M+S 33/230 33/230 33/230 33/230 38/260 38/260
Convertible 205/45 R 17 84 V M+S A/S
with John Coo- 205/45 R 17 84 V M+S 35/240 35/240 35/240 35/240 39/270 39/270
DATA
per Works Kit* 205/45 R 17 84 V
175/60 R 16 82 H M+S
36/250 36/250 36/250 36/250 41/280 41/280
205/40 R 18 82 W
More information about permissible loads and weights can be found on pages 155, 156.
INDEX
111
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
TIRE CODING
Knowing the tire code on the tire's sidewall DOT code: DOT quality grades
makes it easier for you to choose and iden- e.g. DOT xxxx xxx 3506 Tread wear
tify the correct tires.
Manufacturer's code Traction AA A B C
for tire make Temperature A B C
Tire size
Tire size and
e.g. 205/45 R 17 84 V
tire version All passenger car tires must conform
Nominal width in mm to Federal Safety Requirements in
Tire age
Cross-sectional addition to these grades.<
ratio in % Tire age
Radial belt construction Tread wear
The tire's date of manufacture is included
Rim diameter in inches in the tire coding: The tread wear grade is a comparative rat-
Load index, DOT...3506 means that the tire was manu- ing based on the wear rate of the tire when
not on ZR tires factured in the 35th week of the year 2006. tested under controlled conditions on a
specified government test course.
Speed code letter, The manufacturer of your MINI recom-
For example, a tire graded 150 would wear
in front of the R on ZR tires mends replacing all tires after 6 years at
one and one-half, 1 , times as well on the
the latest, even if a tire service life of
government course as a tire graded 100.
Speed code letters: 10 years is possible.
The relative performance of tires depends
Q = up to 100 mph / 160 km/h upon the actual conditions of their use,
Uniform Tire Quality Grading however, and may depart significantly
T = up to 118 mph / 190 km/h
Quality grades can be found where applica- from the norm due to variations in driving
H = up to 131 mph / 210 km/h ble on the tire sidewall between tread habits, service practices and differences in
V = up to 150 mph / 240 km/h shoulder and maximum section width. road characteristics and climate.
W= up to 167 mph / 270 km/h For example:
Treadwear 200 Traction AA
Tire Identification Number Temperature A
Tires with DOT codes meet the guidelines
of the US Department of Transportation.
112
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
TIRE CODING TIRE CONDITION
OVERVIEW
Traction Standard No. 109. Grades B and A represent Inspect your tires frequently for tread wear,
The traction grades, from highest to low- higher levels of performance on the labora- signs of damage and for foreign objects
est, are AA, A, B, and C. tory test wheel than the minimum required lodged in the tread. Check the tread depth.
Those grades represent the tires ability to by law.
stop on wet pavement as measured under Tire tread
CONTROLS
controlled conditions on specified govern- The temperature grade for this tire is Tread depth should not be allowed to go
ment test surfaces of asphalt and concrete. established for a tire that is properly below 1/8 in/3 mm even though in Europe,
A tire marked C may have poor traction per- inflated and not overloaded. Excessive for example, the legally specified minimum
formance. speed, underinflation, or excessive loading, tread depth is only 1/16 in/1.6 mm.
either separately or in combination, can Below 1/8 in/3 mm tread depth, there is a
cause heat buildup and possible tire fail-
OPERATION
The traction grade assigned to this very high danger of hydroplaning at higher
tire is based on straight-ahead brak- ure.< speeds, even with only small amounts of
ing traction tests, and does not include water on the road.
acceleration, cornering, hydroplaning, or RSC: Run-Flat Tires At tread depths below approx. 1/6 in/
peak traction characteristics.< You will recognize Run-Flat Tires by a circu- 4 mm, the ability of winter tires to cope
lar symbol containing the letters RSC on with winter driving conditions decreases
Temperature the side of the tire, refer to page 115. perceptibly. For safety reasons, new tires
REPAIRS
The temperature grades are A, the highest, should be mounted.
B and C, representing the tire's resistance M+S
to the generation of heat and its ability to Winter and all-season tires.
dissipate heat when tested under con- These have better winter performance
trolled conditions on a specified indoor lab- properties than summer tires.
oratory test wheel.
Sustained high temperature can cause the
DATA
material of the tire to degenerate and
reduce tire life, and excessive temperature
can lead to sudden tire failure. The grade C
corresponds to a level of performance
which all passenger car tires must meet
INDEX
under the Federal Motor Vehicle Safety
113
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
TIRE CONDITION
Wheel/tire damage
Due to low-profile tires, please note
that wheels, tires and suspension
parts are more susceptible to road hazards
and consequential damage.
Unusual vibrations during driving may indi-
cate tire damage or other damage to the
vehicle. This may be caused, for example,
by driving over a curb. This is also true for
abnormalities in the vehicle's handling
characteristics, such as a pronounced ten-
dency to pull to the left or right.
Wear indicators in the tread-groove base
In such situations, reduce your speed
are spread around the circumference of the
immediately. Drive carefully to the nearest
tire and are marked on the sidewall of the
MINI Dealer or tire dealer, or have the vehi-
tire with TWI, Tread Wear Indicator. When
cle towed there, if necessary.
tire tread is worn down to the level of the
Tire damage can endanger the lives of both
wear indicators, the remaining tread depth
the vehicle occupants and other road
is 1/16 in/1.6 mm.
users.<
114
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
RUN-FLAT TIRES*
OVERVIEW
Tire change set Have new wheels and tires mounted
In case of a flat tire, the tire change only by your MINI Dealer or a special-
set is not needed, since your vehicle ized tire shop that has specially trained per-
has Run-Flat Tires. sonnel working in accordance with the
When changing a tire, always observe the specifications of the MINI manufacturer.
CONTROLS
safety measures and the procedure for Work that is improperly carried out could
changing tires starting on page 137.< result in consequential damage and pose
safety hazards.<
Your vehicle is additionally equipped with a
tire change set. Retreaded tires
OPERATION
In the MINI COOPER and MINI COOPER Con- The manufacturer of your MINI rec-
ommends that you avoid using
You will recognize Run-Flat Tires by a circu- vertible this is located in the luggage com-
partment under the floor mat. retreaded tires, as this could impair driving
lar symbol containing the letters RSC on
In the MINI COOPER S and MINI COOPER S safety. This is due to possible variations in
the side of the tire.
casing structures and, in some cases, to
Run-Flat Tires consist of conditionally self- Convertible, the tire change set is located in
a separate bag which is attached to the their extreme age, factors which can lead
supporting tires and special rims. The tire
lashing eyelets on the luggage compart- to limited durability.<
reinforcement ensures that driving
REPAIRS
remains possible to a restricted degree in ment floor by means of tie-down straps.
the event of a pressure drop or even a flat
tire.
To continue driving with a damaged tire:
>If equipped with the Flat Tire Monitor,
refer to Flat tire warning, page 75.
DATA
>If equipped with the Tire Pressure Moni-
tor, refer to Low inflation pressure warn-
ing, page 76.
INDEX
115
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
NEW WHEELS AND TIRES
The correct wheels and tires Wheels with Tire Pressure Monitor
The manufacturer of your MINI rec- TPM electronics
ommends mounting only wheels and When mounting new tires or changing over
tires that it has specifically approved for from summer to winter tires, or vice versa,
use on your particular model. Although only use wheels with TPM electronics; oth-
other wheels and tires may theoretically erwise the Tire Pressure Monitor may not
have the same dimensions, variations in be able to detect a puncture, refer to
factors such as manufacturing tolerances page 76. Your MINI Dealer will be glad to
can result in contact between tire and advise you.
bodywork, ultimately leading to serious
accidents. The manufacturer of your MINI Run-Flat Tires
cannot evaluate non-approved wheels and For your own safety, use Run-Flat Tires Tire designation
tires to determine if they are suited for use,
when mounting new tires or replacing
and therefore cannot ensure the operating For each tire size, the manufacturer of your
summer tires with winter tires or vice
safety of the vehicle if they are mounted.< MINI recommends certain tire brands. You
versa. Keep in mind that no spare wheel is
can recognize these by the clearly visible
available in the event of a flat. Your MINI
Your MINI Dealer will be glad to inform you Dealer will be glad to advise you. designation on the tire's sidewall.
about the correct wheel and tire combina- When used properly these tires meet the
tion for your vehicle. For safety reasons, the manufacturer highest standards regarding safety and
The correct wheel and tire combination is of your MINI recommends having handling characteristics.
also important for various systems that Run-Flat Tires replaced, not repaired, if they
would otherwise be impaired, e.g. ABS or are damaged.<
DSC.
To maintain good handling and vehicle
response, use only tires of a single brand
and tread configuration. In the event of tire
damage, remount the previous wheel and
tire combination as soon as possible.
116
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
NEW WHEELS AND TIRES SNOW CHAINS*
OVERVIEW
Special characteristics of winter tires Only certain types of snow chains have
The manufacturer of your MINI recom- been tested by the manufacturer of your
mends winter tires for driving in adverse MINI, classified as road-safe and recom-
winter road conditions. While all-season mended. Contact your MINI Dealer for
tires with the M+S designation provide bet- more details. Their use is only permitted in
CONTROLS
ter winter traction than summer tires, they pairs on the front wheels on winter tires of
generally do not achieve the full perfor- the following types:
mance of winter tires. >175/65 R 15 M+S
>175/60 R 16 M+S.
Observe speed ratings: When fitting, comply with the manufac-
OPERATION
Never exceed the maximum speed turer's instructions. With chains, do not
for which the winter tires are rated.< exceed a speed of 30 mph / 50 km/h.
REPAIRS
helpful to switch off the ASC or DSC for a
grease and fuel. Do not exceed the tire
brief period, refer to page 72.<
inflation pressure specified on the tire side-
wall.
DATA
INDEX
117
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
BONNET
To close
Allow the bonnet to fall from a height of
approx. 1 ft/30 cm.
118
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
ENGINE COMPARTMENT: MINI COOPER AND MINI COOPER CONVERTIBLE
OVERVIEW
CONTROLS
OPERATION
REPAIRS
1 Reservoir for windshield and rear 4 Engine oil filler neck 121 7 Reservoir for headlamp cleaning
window washer system* 64 5 Battery 144 system* 64
DATA
2 Vehicle identification number 6 Brake fluid reservoir 124 8 Engine oil dipstick 121
3 Coolant expansion tank 122
INDEX
119
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
ENGINE COMPARTMENT: MINI COOPER S AND MINI COOPER S CONVERTIBLE
1 Reservoir for windshield and rear 3 Coolant expansion tank 122 6 Brake fluid reservoir 124
window washer system* 64 4 Engine oil filler neck 121 7 Reservoir for headlamp cleaning
2 Vehicle identification number 5 Auxiliary terminal for system* 64
jump-starting 146 8 Engine oil dipstick 121
120
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
ENGINE OIL
OVERVIEW
Add oil within the next 30 miles/
50 km, otherwise the engine could be
damaged.<
CONTROLS
reach of children. Comply with all
warning labels and information on lubri-
cant containers, otherwise health risks may
result.<
Oil change
OPERATION
Have the oil changed only by a MINI Dealer
Measuring the oil level As with fuel economy, oil consumption is or a workshop that has specially trained
1. With the vehicle's engine at normal directly influenced by your driving style and personnel working in accordance with the
operating temperature, i.e. after unin- vehicle operating conditions. specifications of the MINI manufacturer.
terrupted driving for at least 6 miles/ The oil volume between the two marks
10 km, park the vehicle on a level surface MIN, MAX on the dipstick corresponds to
REPAIRS
2. Switch off the engine approx. 1.1 quarts/1 liter.
3. Pull the dipstick out after approx.
5 minutes and wipe it off with a lint-free Do not fill beyond the upper mark on
cloth, paper towel, or similar material the dipstick. Excess oil will damage
4. Carefully push the dipstick all the way the engine.<
into the guide tube and pull it out again.
The oil level should be between the two Adding engine oil
DATA
marks on the dipstick. Only top up oil when the oil level has
dropped to just above the lower mark
of the dipstick. However, never allow the
level to drop below the lower mark.<
INDEX
121
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
ENGINE OIL COOLANT
Approved engine oils The correct SAE grade for your MINI is Do not open the cooling system when
The quality of the engine oil selected has determined by the climatic conditions of the engine is hot. Escaping coolant
critical significance for the operation and the region in which you normally drive your can cause burns.<
service life of an engine. Based on exten- MINI.
sive testing, the manufacturer of your MINI Coolant consists of water and a coolant
approves only certain grades of engine oil. Approved oils feature the SAE grades additive. Not all commercially available
5W-40 and 5W-30.< additives are suitable for your MINI. Your
Only use High Performance Synthetic Oil
MINI Dealer knows which additives are
approved by the manufacturer of your
These oils can be used for driving at all out- suitable and will be glad to advise you.
MINI.
side temperatures.
If MINI High Performance Synthetic Oil is Only use suitable additives, other-
not available, you can add small quantities wise the engine can be damaged. The
of another synthetic oil in between oil additives are hazardous to your health.<
changes. Only use oils with a specification
of API SH or higher. Comply with the applicable environ-
mental laws regulating the disposal
If you have any further questions of coolant additives.<
regarding MINI High Performance
Synthetic Oil or approved synthetic oils,
your MINI Dealer will be glad to advise
you.<
Viscosity grades
Viscosity is a measure of an oil's flow rating
and is classified into SAE grades.
122
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
COOLANT
OVERVIEW
3. The coolant level is correct if it is
between the MIN and MAX markings on
the transparent expansion tank
4. If necessary, slowly add coolant until the
correct level is reached; do not overfill
CONTROLS
5. MINI COOPER and MINI COOPER Con-
vertible:
Reattach the cap and press it down
firmly
MINI COOPER S and MINI COOPER S Con-
OPERATION
vertible:
Screw the cap back on and tighten it
As an example, the illustration shows the
firmly
coolant tank of the MINI COOPER and the
MINI COOPER Convertible. 6. Have the cause of the coolant loss
removed as soon as possible.
Checking coolant level
REPAIRS
1. The engine must be at ambient temper-
ature
2. MINI COOPER and MINI COOPER Con-
vertible:
Slowly pull the cap of the expansion
tank by the tab until the excess pressure
can escape. Then remove the cap com-
DATA
pletely.
MINI COOPER S and MINI COOPER S Con-
vertible:
Slightly unscrew the cap of the expan-
sion tank counterclockwise until the
INDEX
excess pressure can escape. Then
remove the cap completely
123
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
BRAKE SYSTEM
124
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
MINI MAINTENANCE SYSTEM
OVERVIEW
Service interval display Service and Warranty Information
While conventional systems determine Booklet for US models, Warranty and
maintenance intervals according to fixed Service Guide Booklet for Canadian
kilometer readings, the MINI Maintenance models
System takes the vehicle's driving condi- For additional information on maintenance
CONTROLS
tions into account because not every mile is intervals and procedures, please refer to
the same as another in this respect. the Service and Warranty Information
From a maintenance standpoint, Booklet for US models or the Warranty and
60,000 miles/100,000 km accumulated Service Guide Booklet for Canadian models.
through short-distance driving cannot be As a precaution against rust, it is advisable
OPERATION
treated the same as 60,000 miles/ to have the body checked for damage from
100,000 km accumulated through long-dis- rocks or gravel at the same time, depending
The MINI maintenance system helps main-
tance highway travel. upon operating conditions.
tain your vehicle's road safety and opera-
tional safety. The condition-based MINI Maintenance
System includes the Engine Oil Service and The manufacturer of your MINI rec-
Please bear in mind that regular mainte-
Inspections I and II. ommends having maintenance and
nance is not only necessary for the safety of
Determining the maintenance intervals repair work carried out only by a MINI
REPAIRS
your vehicle, but also plays a significant
Dealer or a workshop that has specially
role in maintaining the resale value of the according to the actual use of the vehicle
covers every kind of operating situation. trained personnel working in accordance
vehicle.
People who drive very little, i.e. much less with the specifications of the MINI manu-
than 6,000 miles/10,000 km per year, facturer.
should have the engine oil changed at least Make sure that maintenance work is con-
every 2 years since oil deteriorates over firmed with an entry in the Service and
Warranty Information Booklet for
DATA
time, regardless of use.
US models or the Warranty and Service
For more information on the service inter-
Guide Booklet for Canadian models. These
val display, refer to page 69.
entries are your proof that the vehicle has
received regular maintenance.<
INDEX
125
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
SOCKET FOR ONBOARD DIAGNOSTICS OBD CARING FOR YOUR VEHICLE
speed and visit your nearest MINI Dealer as Suitable car-care products
soon as possible. Severe engine misfiring Use the cleaning and car-care prod-
can quickly lead to serious damage of emis- ucts available at your MINI Dealer.<
sions-related components, especially the
catalytic converter. Washing your vehicle
You can wash your new MINI or MINI Con-
If the fuel filler cap is not properly
vertible in automatic car washes from the
tightened, the OBD system may con-
beginning. Preference should be for cloth
clude that fuel vapors are escaping, causing
car washes. If, due to lack of availability,
an indicator to light up. If the filler cap is
brush car washes must be used, modern
then tightened, the indicator should go out
systems with soft brushes should be given
within a few days.<
Primary components of exhaust emissions preference.
can be checked by a device via the OBD
socket. When using steam cleaners or high-
pressure cleaners, maintain sufficient
This socket is located to the left of the
distance to the vehicle and do not exceed a
driver's side, on the bottom of the instru-
maximum temperature of 1407/606. If
ment panel underneath a cover.
the jet is too close or the pressure is too
high, this can lead to damage or initial
Exhaust emission values damage that can develop into more serious
The warning lamp comes on. The damage. Water that enters vehicle compo-
exhaust emissions have deterio- nents can lead to damage over the long
rated. Have the vehicle checked as term.
soon as possible. After washing the vehicle, apply the brakes
Canadian models display this briefly to dry them, otherwise water can
warning lamp. reduce braking efficiency over the short
term and the brake rotors can corrode.
Under some circumstances, the lamp will Switch the rain sensor off when passing
flash. This indicates severe engine misfir- through an automatic car wash, refer to
ing. In this case, you should reduce your page 63. Failure to do so could result in
126
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
CARING FOR YOUR VEHICLE
OVERVIEW
damage caused by undesired wiper activa- Vehicle paintwork Care of special parts
tion.< Regular care contributes greatly to driving >Light-alloy wheels*:
safety and value retention. Use wheel cleaner especially during the
Rod antenna winter months, but do not use any
Environmental influences varying from one
If necessary, for example before aggressive, acidic, strong alkali or rough
CONTROLS
region to the next can affect the vehicle
entering a car wash or a garage with paintwork. Please base the frequency and cleansers or steam jets above 1407/
elevator ramp, remove the rod antenna. scope of car care on these various influ- 606. Observe the manufacturer's
To do so, grip the rod antenna at the base ences. instructions
and unscrew it from the antenna foot by >Chrome parts* such as the bonnet grille,
turning it to the left.< Care of upholstery door handles, and similar parts:
OPERATION
Particularly if they were exposed to road
Depressions that come about on the uphol-
Headlamps salt, clean these parts carefully with
stery material of the seats in daily use can
When cleaning the headlamps, plenty of water and shampoo additive, if
be brushed out using a slightly damp brush
please note: do not rub the head- necessary. For additional treatment, use
against the grain.
lamps dry and do not use any abrasive or chrome polish
The fact that velour lays down is not a qual- >Rubber components:
caustic cleaning products. Remove dirt and
ity defect, but rather is inevitable in the Treat only with water or rubber care
contamination, such as insects, by soaking
REPAIRS
case of home textiles or clothing materials. products.
with shampoo and then rinsing with plenty
of water. Always use a deicer spray to In the case of strong sunlight and longer Do not use silicon sprays or other
remove accumulated ice and snow; never parking periods, cover the seats or all win- silicon-containing care products,
use a scraper.< dows to prevent discoloration. otherwise noise and damage could
occur.<
>Plastic parts, artificial leather surfaces,
DATA
headliner, lamp lenses, cover glass over
display elements as well as matt-black
die-cast parts:
Clean these parts with water and plastic
care products, if necessary. Do not
dampen seats and the headliner.
INDEX
Never use solvents such as lacquer thin-
127
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
CARING FOR YOUR VEHICLE
ner, heavy-duty grease remover, fuel or quality products processed using state-of- Care of the MINI Convertible's top
similar the-art methods and will retain their qual- The appearance and service life of the con-
>Fine-wood parts*: ity level for many years if cared for prop- vertible top largely depend on the proper
Please clean wood paneling and other erly. care and operation of the convertible top.
wood parts only with a damp cloth. Dry Regular cleaning and care are necessary, as You should therefore observe the following
off with a soft cloth dust and road dirt scratch in pores and notes in particular:
>Safety belts: creases and lead to heavy wear as well as
Only clean using mild soap, leaving the >Whenever possible, park your vehicle in
premature brittleness of the leather and
belts installed. the shade to protect it from intense sun-
imitation leather surface.
Do not dry clean, as the fabric can be light
This is why you should use a cloth or vac-
destroyed. >Do not fold the convertible top when it is
uum cleaner to remove dust on a regular
Always roll up safety belts only when wet, dirty or frozen; otherwise water
basis.
dry. marks, moisture stains and chafing could
Since dirt and oil slowly destroy the protec- result
Dirty safety belts prevent unrolling and
tive layer of the leather and imitation >If the vehicle is parked in an enclosed
thus negatively affect safety
leather, a treatment with a leather care area for a longer period of time, make
>Floor carpets and floor mats*:
product is necessary twice a year. This pre- sure that there is sufficient ventilation
Use an interior cleaner to clean these
serves the quality of the leather and pre- >Remove bird droppings immediately
items if they are heavily soiled. Floor
vents electrostatic charging. because they have corrosive properties.
mats can be removed to allow the inte-
rior to be cleaned
Cleaning agents can contain hazard-
>Wiper blades: Never use spot removers, paint thin-
ous or health-damaging substances. ner, solvents, cleaning fuel or similar
Clean with soap and water. Replace
For this reason, always observe the warn- since these products can destroy the rubber
wiper blades twice a year, before and
ings on the package. For interior cleaning, seals and cause leaks.<
after the cold season. This is particularly
always open the doors or windows of the
important on vehicles fitted with a rain
vehicle.
sensor.
Do not use any products that are not
intended for cleaning the vehicle.<
Caring for leather* and imitation
leather
The leather and imitation leather used by
the manufacturer of your MINI are high
128
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
CARING FOR YOUR VEHICLE VEHICLE STORAGE
OVERVIEW
If the convertible top is very dirty, it is rec- Your MINI Dealer will be glad to advise you
ommended that it be cleaned with a spe- on what is important if the vehicle is to be
cial convertible top cleaning agent. Your decommissioned for longer than three
MINI Dealer will be glad to advise you. months.
Clean the convertible top as follows:
CONTROLS
>Spray the convertible top with an
approved convertible top cleaning agent
>Then scrub the convertible top with a
wet sponge using circular motions
>Afterward, finish cleaning the vehicle in
OPERATION
a car wash or rinse the convertible top
thoroughly with plenty of water.
After washing the convertible top three to
five times, it should be treated with a
waterproofing agent.
Wind deflector*
REPAIRS
>Clean the wind deflector with a soft
sponge and water evenly across the
entire surface so that water marks do
not form
>Do not clean it with a vacuum cleaner or
upholstery brush attachment, otherwise
DATA
the net could be damaged.
INDEX
129
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
130
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
OVERVIEW
OVERVIEW
CONTROLS
CONTROLS
OPERATION
OPERATION, CARE, MAINTENANCE
REPAIRS
OWNER SERVICE PROCEDURES
DATA
TECHNICAL DATA
INDEX
INDEX
Repairs 131
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
ONBOARD TOOL KIT WIPER BLADES
132
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
WIPER BLADES LAMPS AND BULBS
OVERVIEW
Lamps and bulbs are an important compo- Whenever working on the electrical
nent of vehicle safety. Therefore, proceed system, switch off the electrical
carefully when handling bulbs. accessory you are working on or disconnect
To replace bulbs which are not described the cable from the negative terminal of the
here, please contact a MINI Dealer or a battery. Failure to do this could result in
CONTROLS
workshop that has specially trained per- short circuits.
sonnel working in accordance with the To prevent injuries and damage, comply
specifications of the MINI manufacturer. with any instructions provided by the bulb
manufacturer.<
Do not touch the glass portion of a
new bulb with your bare hands since
OPERATION
even small amounts of impurities burn into
Rear window wiper* the surface and reduce the service life of
1. Rotate the wiper arm completely out the bulb. Use a clean cloth, paper napkin, or
2. Turn the wiper blade as far as it will go similar material, or hold the bulb by its
to the rear metallic base.<
3. Press the wiper blade against the limit
REPAIRS
and thus out of the mounting A replacement bulb set can be obtained at
4. Press the new wiper blade into the your MINI Dealer.
mounting.
DATA
INDEX
133
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
LAMPS AND BULBS
Xenon lamps*
1 Low beams Turn signal indicators, front
The service life of these bulbs is very long
H7 bulb, 55 watts and the probability of a failure is very low, 21 watt bulb
provided that they are not switched on and 1. Open the bonnet
2 High beams off an unusual number of times. If one of 2. Reach into the opening for the turn sig-
H7 bulb, 55 watts these bulbs should nevertheless fail, it is nal indicators from above
possible to continue driving with great cau- 3. Apply gentle pressure to the bulb holder
The H7 bulb is pressurized. Therefore, tion using the fog lamps, provided traffic while turning it to the left
wear safety glasses and protective laws in your area do not prohibit this. 4. Remove and replace the bulb.
gloves. If the lamp is damaged there is a
risk of injury.< Have any work on the xenon lamp Parking lamps and standing lamps
system, including bulb replacement, 5 watt bulb
For checking and adjusting headlamp carried out only by a MINI Dealer or a work-
The parking lamps and standing lamps are
aim, please contact your MINI shop that has specially trained personnel
integrated in the lamp housing of the turn
Dealer.< working in accordance with the specifica-
signal indicator.
tions of the MINI manufacturer. Due to
Replacing bulbs high voltage, there is a risk of fatal injury if 1. Turn the bulb holder to the left and pull
out
The headlamps are integrated into the bon- work on the xenon lamps is carried out
improperly.< 2. Remove and replace the bulb.
net.
134
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
LAMPS AND BULBS
OVERVIEW
CONTROLS
OPERATION
Side turn signal indicators Tail lamps Replacing bulbs
5 watt bulb Turn signal lamp 1: 21 watts To access the bulb holder, remove the cover
1. Slide the lamp toward the rear of the Rear lamp 2: 21/5 watt bulb on the side panel in the luggage compart-
vehicle and remove ment for MINI and MINI Convertible.
Backup lamp 3: 16 watts
2. Remove and replace the bulb. 1. Unplug the power supply, arrow 1
REPAIRS
1 Turn signal indicator yellow 2. Squeeze the retaining clips together, see
arrows 2, and remove the bulb holder
2 Rear lamp/Brake lamp red
3. Apply gentle pressure to the bulb while
3 Backup lamp white turning it to the left
4. Remove and replace the bulb
5. Press the bulb holder into position until
you hear it engage
DATA
6. Plug in the power supply.
INDEX
135
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
LAMPS AND BULBS
136
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
REPAIRING A FLAT TIRE SPACE-SAVER SPARE TIRE*
OVERVIEW
Safety measures in the event of a To change a space-saver spare tire, proceed
flat: as follows:
Park the vehicle as far away from flowing >Remove space-saver spare tire, refer to
traffic as possible, and switch on the haz- the section after the next one
ard warning flashers. >Prepare for tire change, refer to page 139
CONTROLS
Turn the steering wheel to the straight- >Jack up the vehicle, refer to page 140
ahead wheel position and engage the >Mount the space-saver spare tire, refer
steering lock. Engage the parking brake and to page 140
shift into 1st or reverse gear selector lever >Tighten the lug bolts, refer to page 140
in P. >Drive with space-saver spare tire, refer to
All passengers should be outside the vehi-
OPERATION
page 139.
cle and well away from your immediate
working area behind a guardrail, for Tire change set
instance. On vehicles with a space-saver spare tire,
If a portable hazard warning lamp is avail- the tire change set with onboard tools is
able, set it up on the roadside at an appro- stored in the luggage compartment under
priate distance from the rear of the vehicle. the floor mat.
REPAIRS
Comply with all safety guidelines and regu- 1 Chock, folding
lations.<
2 Hubcap remover
In the event of a flat tire, different proce- 3 Wheel stud wrench
dures should be followed depending on the 4 Jack
equipment included in your vehicle: 5 Special wrench for removing the space-
>Vehicles with Run-Flat Tires, refer to saver spare tire
DATA
page 115 6 Towing eyelet
>Vehicles with a space-saver spare tire,
refer to the following section 7 Lifting handle
>Vehicles with MINI Mobility System, The onboard tool kit includes a pouch with
refer to page 141. a plastic bag in which you can place the
INDEX
damaged wheel.
137
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
SPACE-SAVER SPARE TIRE*
Removing the space-saver spare tire 3. Screw the lifting handle from the 5. Squeeze the securing spring
The screw connection of the space-saver onboard tool kit onto the thread 6. The space-saver spare tire is released
spare tire is in the luggage compartment 4. Raise the lifting handle slightly and must be held by the lifting handle
under the floor mat, on the base of the 7. Lower the space-saver spare tire with
storage compartment for the tire change the lifting handle
set. 8. Unscrew the lifting handle
1. Loosen the screw connection using the
special wrench
2. Take out the cover panel
138
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
SPACE-SAVER SPARE TIRE* CHANGING TIRES
OVERVIEW
Driving with the space-saver spare tire Additional safety measures in the
Drive cautiously. Do not exceed a speed of event of a tire change:
50 mph / 80 km/h. Change tires only on a flat, solid and non-
slippery surface.
You must expect changes in vehicle han-
The vehicle or the jack could slip sideways
CONTROLS
dling such as lower track stability during
on soft or slippery support surfaces, such as
braking, longer braking distances and
snow, ice, flagstones, etc..
changes in self-steering properties when
Do not use a wooden block or similar object
close to the handling limit. These effects
as a support base for the jack, as this would
are more pronounced when driving with
prevent it from extending to its full support
winter tires.
height and reduce its load-carrying capac-
OPERATION
ity.
9. Pull out the space-saver spare tire Only one space-saver spare tire may
Do not lie under the vehicle or start the
towards the rear underneath the vehi- be mounted at one time. Reinstall a
engine when the vehicle is supported by
cle wheel and tire of the original size as soon
the jack risk of fatal injury.<
10. Position the space-saver spare tire with as possible.<
the valve facing upwards Preparing for a tire change
11. Unscrew the valve extension from the Check the tire inflation pressure at
REPAIRS
the earliest opportunity and correct it Observe the safety precautions
valve of the space-saver spare tire
if necessary. Replace the defective tire as regarding flat tires on page 137.<
12. Unscrew the dust cap from the exten-
sion and place it on the valve of the soon as possible and have the new wheel/
tire assembly balanced.< 1. For vehicles with a space-saver spare
space-saver spare tire.
tire:
Place the folding chock behind the front
Due to its different dimensions, the
wheel on the other side of the vehicle;
DATA
damaged wheel cannot be placed in
on downward inclines, place it in front of
the recess for the space-saver spare tire.<
this wheel. If the wheel is changed on a
surface with a more severe slope, take
additional precautions to secure the
vehicle from rolling
INDEX
2. Loosen the lug bolts by a half turn.
139
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
CHANGING TIRES
140
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
MINI MOBILITY SYSTEM*
OVERVIEW
MINI Mobility System 1 Jack
The MINI Mobility System is provided to 2 Wheel stud wrench
help you repair a flat tire. With the help of 3 Hubcap remover
this system you can apply a liquid sealant
4 Wrench, screwdriver/Phillips screw-
on the inside of the tire, which seals the
CONTROLS
driver, towing eyelet
damaged area and enables you to continue
to drive. 5 Compressor, hose with manometer and
plug for cigarette lighter socket
Preparing for tire repair 6 Package with filling hose, valve remover
Before using the MINI Mobility Sys- and valve core
OPERATION
tem read the warning and danger 7 Filling canister
precautions on the equipment.< MINI Mobility System with onboard 8 Hex wrench/screwdriver
tools 9 Adapter for wheel lug lock
If possible, leave objects in which have
The MINI Mobility System with tire change
been forced into the tire.
set and onboard tools is located in the lug-
Take off the tag regarding speed limits and gage compartment under the floor mat:
stick it onto the steering wheel.
REPAIRS
Using the MINI Mobility System
In order to repair a flat tire with the MINI
Mobility System, proceed as follows:
>Pump in liquid sealant, refer to page 142
>Reinflate the tire, refer to page 142
DATA
>Distribute liquid sealant, refer to
page 143
>Check tire inflation pressure, refer to
page 143
>Drive on, refer to page 143.
INDEX
141
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
MINI MOBILITY SYSTEM*
142
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
MINI MOBILITY SYSTEM*
OVERVIEW
If an air pressure of 26 psi/180 kPa Checking tire inflation pressure Driving on
cannot be reached, unscrew the 1. After driving for approx. 10 minutes, pull Do not exceed the permitted maxi-
hose 1 and drive back and forth over at a suitable location mum speed of 50 mph / 80 km/h;
about 33 ft/10 m so that the liquid seal- 2. Screw hose with manometer back onto otherwise an accident could happen.<
ant is distributed in the tire. Afterwards the tire valve
CONTROLS
repeat the procedure. 3. Check the tire inflation pressures. Replace the defective tire as soon as
If an air pressure of 26 psi/180 kPa is still possible and have the new wheel/tire
The tire inflation pressure must be
not reached, the tire is too badly dam- assembly balanced. Have the MINI Mobility
at least 18 psi/130 kPa. If it is not,
aged. Please contact the nearest MINI System refilled.<
do not continue driving.<
Dealer.<
If 18 psi/130 kPa are displayed:
OPERATION
5. Turn off compressor 2 Tire change set
6. Unscrew hose 1 from the tire valve 4. Ignition key position 1:
When changing a tire, always observe the
7. Store the MINI Mobility System back in switch on compressor 2. Correct the tire
safety measures and the procedure for
the vehicle. inflation pressure to the specified value,
changing tires starting on page 137.
refer to the tire inflation pressure table
The instructions for using the MINI on page 109
In case of a flat tire the tire change
Mobility System are also given on the 5. Replace the tire as soon as possible. set is not needed due to the availabil-
REPAIRS
equipment.< ity of the MINI Mobility System.<
The use of the MINI Mobility System
Distributing liquid sealant may be ineffective with tire damage
larger than approx. 1/6 in/4 mm. Please
Immediately drive for approx. 10 minutes,
contact the nearest MINI Dealer if the tire
so that the liquid sealant is uniformly dis-
cannot be made drivable with the MINI
tributed.
Mobility System.<
DATA
Do not exceed a speed of 40 mph /
60 km/h.
If possible do not drive at a speed lower
than 10 mph / 20 km/h.<
INDEX
143
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
VEHICLE BATTERY
144
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
FUSES
OVERVIEW
Do not attempt to repair a blown
fuse or replace it with a fuse of a dif-
ferent color or Ampere rating. To do this
could cause a fire in the vehicle resulting
from a circuit overload.<
CONTROLS
If a second fuse blows in the same cir-
cuit, have the cause rectified by your
MINI Dealer.<
OPERATION
inside of the fuse box cover panel.
In the engine compartment In the vehicle interior
Plastic tweezers and spare fuses can be
found in the fuse box in the vehicle interior. In the MINI COOPER and the MINI COOPER On the left side of the footwell in the side
Convertible to the right of the battery. trim panel.
In the MINI COOPER S and the MINI COO- Open the fuse box lid. To do so, press the
PER S Convertible to the right of the air fil- fastener.
REPAIRS
ter box.
Open the fuse box lid. To do so, press the
clip fastener.
DATA
INDEX
145
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
JUMP-STARTING
When your battery is discharged, you can 1. Check whether the battery of the sup-
use two jumper cables to start your vehicle port vehicle has 12 Volts and approxi-
with power from the battery in a second mately the same capacity measured in
vehicle. Correspondingly you can help start Ah. These data are printed on the bat-
another vehicle. Only use jumper cables tery
with fully insulated handles on the termi- 2. Switch off the engine of the support
nal clamps. vehicle
3. Switch off any electrical systems and
Preparing for jump-starting components in both vehicles.
Do not touch live wiring and cables
on a running engine. There is a risk of Connect the jumper cables
fatal injury if you do this. Carefully observe Always adhere to this sequence when
The illustration shows the auxiliary jump-
the following instructions to avoid per- connecting the jumper cables; failure
starting terminal on the MINI COOPER S
sonal injury and/or damage to either vehi- to observe this procedure can lead to spark-
and the MINI COOPER S Convertible.
cle or both vehicles. Make sure that there is ing and pose an injury hazard.<
In the MINI COOPER S and the MINI
no contact between the bodywork of the
COOPER S Convertible, the auxiliary jump-
two vehicles to avoid a short circuit haz-
starting terminal, arrow 1, acts as the posi-
ard.<
tive battery terminal, refer to view of
engine compartment on page 120. The
cover is marked with a +.
1. Remove the cover of the battery or open
the cover of the auxiliary jump-starting
terminal:
>MINI COOPER and MINI COOPER Con-
vertible:
Remove the battery cover.
To do so, press the two clips simulta-
neously.
>MINI COOPER S and MINI COOPER S
Convertible:
146
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
JUMP-STARTING TOWING AND TOW-STARTING
OVERVIEW
Flip open the cover of the auxiliary Performing the jump-start Observe all applicable laws and regu-
jump-starting terminal, arrow 1 1. Start the engine of the support vehicle lations for towing and tow-start-
2. Connect one terminal clamp of the and allow it to run at increased idle ing.<
plus/+ jumper cable to the positive bat- speed for several minutes
tery terminal or to an auxiliary jump- 2. Start the engine of the other vehicle in Do not transport any occupant other
CONTROLS
starting terminal of the support vehicle the usual manner. than the driver in a vehicle that is
3. Connect the other terminal clamp of the If the first start attempt is not success- being towed.<
plus/+ jumper cable to the positive bat- ful, wait a few minutes before another
tery terminal or to an auxiliary jump- attempt in order to allow the discharged Using the towing eyelet
starting terminal of the vehicle to be battery to recharge The screw-in towing eyelet is stored in the
started
OPERATION
3. Allow the engines of both vehicles to run onboard tool kit, refer to page 132; be sure
Engine or body ground in your MINI or MINI for several minutes. that it remains with the vehicle at all times.
Convertible: arrow 2. On the MINI or MINI Convertible: It can be attached at the front or rear of
4. Connect one terminal clamp of the Before disconnecting the jumper your vehicle.
minus/ jumper cable to the negative cables, switch on the lighting, the rear
battery terminal or to an engine or body window defroster and the highest Use only the towing eyelet supplied
ground of the support vehicle blower speed to prevent a voltage surge with the vehicle and screw it in firmly
REPAIRS
5. Connect the second terminal clamp of from the regulator to the electrical sys- until it stops. Use the towing eyelet for
the minus/ jumper cable to the nega- tems and components.< towing on paved roads only. Avoid subject-
tive terminal of the battery or to the ing the towing eyelet to lateral loads, e.g.
4. Then disconnect the jumper cables in
engine or body ground of the vehicle to do not lift the vehicle using the towing eye-
the reverse order.
be started. let. Otherwise, the towing eyelet and the
If necessary have the battery checked and vehicle could be damaged.<
completely charged at a MINI Dealer.
DATA
Do not use spray starter fluids to start
the engine.<
INDEX
147
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
TOWING AND TOW-STARTING
148
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
TOWING AND TOW-STARTING
OVERVIEW
Tow-starting
Do not tow-start vehicles featuring
automatic transmission with Step-
tronic.
Jump-starting, refer to page 146.<
CONTROLS
Avoid tow-starting the vehicle whenever
possible. Jump-start the engine instead,
refer to page 146. Vehicles with a catalytic
converter should only be tow-started if the
OPERATION
engine is cold. Vehicles with an automatic
transmission cannot be tow-started.
With a tow truck:
1. Turn on the hazard warning flashers;
Have the MINI or MINI Convertible trans-
comply with national regulations
ported by a tow truck with a lift sling, or on
2. Turn the ignition key to position 2
a flatbed.
3. Engage the 3rd gear
4. Have the vehicle towed with the clutch
REPAIRS
Only tow vehicles featuring auto-
completely depressed and then slowly
matic transmission with Steptronic
release the clutch. After the engine has
with the front wheels raised or on a special
started, immediately depress the clutch
transport vehicle; otherwise the transmis-
again completely
sion can be damaged.
5. Pull over at a suitable location, remove
Do not lift the vehicle by the towing eyelet,
the tow bar or tow rope, and turn off the
nor by parts of the body or chassis. Other-
hazard warning flashers
DATA
wise damage could result.<
6. Have the vehicle checked.
INDEX
149
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
150
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
OVERVIEW
OVERVIEW
CONTROLS
CONTROLS
OPERATION
OPERATION, CARE, MAINTENANCE
REPAIRS
OWNER SERVICE PROCEDURES
DATA
TECHNICAL DATA
INDEX
INDEX
Data 151
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
ENGINE DATA
152
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
DIMENSIONS: MINI
OVERVIEW
CONTROLS
OPERATION
REPAIRS
DATA
All measurements in inches/millimeters. Smallest turning circle dia. 34 ft 10 in/10.66 m.
INDEX
Values following a ; are differing values for MINI COOPER S.
153
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
DIMENSIONS: MINI CONVERTIBLE
154
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
WEIGHTS: MINI
OVERVIEW
MINI COOPER MINI COOPER S
Curb weight, with all optional special equipment
with manual transmission lbs/kg 2,524/1,145 2,679/1,215
automatic transmission with Steptronic lbs/kg 2,557/1,160 2,723/1,235
CONTROLS
Approved gross vehicle weight
with manual transmission lbs/kg 3,340/1,515 3,494/1,585
automatic transmission with Steptronic lbs/kg 3,373/1,530 3,538/1,605
Cargo and luggage load capacity lbs/kg 816/370 816/370
Approved front axle load lbs/kg 1,918/870 1,962/890
OPERATION
Approved rear axle load lbs/kg 1,609/730 1,698/770
Approved roof load, with special MINI roof rack lbs/kg 165/75 165/75
Luggage compartment volume cu ft/liters 5.3/150 5.3/150
with rear backrest folded down cu ft/liters 23.7/670 23.7/670
REPAIRS
DATA
INDEX
155
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
WEIGHTS: MINI CONVERTIBLE
156
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
CAPACITIES
OVERVIEW
Notes
Fuel tank gal./liters approx. 13.2/50 Fuel quality, refer to page 105
Reserve gal./liters approx. 2.1/8
Window washer system quarts/liters approx. 2.4/2.3 More details, refer to page 64
CONTROLS
Headlamp washer system quarts/liters approx. 2.6/2.5
Cooling system including heater circuit quarts/liters 5.6/5.3 MINI COOPER and More details, refer to page 122
MINI COOPER Convertible
quarts/liters 6.3/6.0 MINI COOPER S and
MINI COOPER S Convertible
OPERATION
REPAIRS
DATA
INDEX
157
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
158
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
OVERVIEW
OVERVIEW
CONTROLS
CONTROLS
OPERATION
OPERATION, CARE, MAINTENANCE
REPAIRS
OWNER SERVICE PROCEDURES
DATA
TECHNICAL DATA
INDEX
INDEX
Index 159
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
EVERYTHING FROM A TO Z
160
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
EVERYTHING FROM A TO Z
OVERVIEW
Brake pads 103 C Car wash, refer to Washing Chrome-plated parts, care 127
break-in procedures 102 California Proposition 65 your vehicle 126 Cigarette lighter 90
warning lamp 18 warning 7 Cassette operation, refer to Cigarette lighter socket 90
Brakes 124 Capacities 157 Owner's Manual for Radio Cigarette tray, refer to
ABS 72 Car care, refer to Caring for your Catalytic converter, refer to Ashtray 89
CONTROLS
brake fluid 124 vehicle 126 Hot exhaust system 104 Circulation of air, refer to
brake pads 103 Car-care products 126 CBC Cornering Brake Control 72 Recirculated air mode 83, 86
break-in procedures 102 Care, vehicle 126 CD changer, refer to Owner's Cleaning the rear window 64
CBC 72 Care of plastics 127 Manual for Radio Cleaning the vehicle, refer to
indicator/warning Care of synthetic leather 127 CD operation, refer to Caring for your vehicle 126
lamps 16, 17, 18 Cargo area Owner's Manual for Radio Clock 67
OPERATION
parking brake 54 opening from the outside 29 Center armrest 89 12-hour/24-hour mode 67
Brake system 124 opening with the remote Central locking system 24 changing the time 67
brake fluid 124 control 26 interior 28 Closing
brake pads 103 volume 155, 156 Changing bulbs 133 from inside 28
break-in procedures 102 Cargo area, refer to Luggage Changing the wiper from outside 25
disc brakes 103 compartment in the MINI 93 blades 132, 133 Clothes hooks 104
REPAIRS
warning lamp 17 Cargo area cover, refer to Changing tires 139 Clutch 53
Brake wear warning Luggage compartment space-saver spare tire 137 break-in procedures 102
brake pads 103 cover 93 Charge-current indicator Cockpit 12
warning lamp 18 Car keys, refer to Keys 24 light 16 Coding, tires 112
Breaking in 102 Carpet care 128 Children, transporting 50 Cold start, refer to Starting the
Bulb replacement, refer to Car radio, refer to separate Child-restraint fixing system, engine 53
Lamps and bulbs 133 Owner's Manual LATCH 52 Compact disk operation, refer
DATA
Buttons on multifunction Car telephone, refer to separate Child-restraint systems 50 to Owner's Manual for Radio
steering wheel 20 Owner's Manual Child seat, refer to Installing Compartments, refer to
automatic transmission with Car vacuum cleaner, child-restraint systems 50 Storage compartments 88
Steptronic 58 connecting, refer to Cigarette Chock, folding Computer, refer to Onboard
lighter socket 90 space-saver spare tire 137 computer 70
Car wash 126 Chrome parts, refer to Caring Condensed water, refer to Air
INDEX
for your vehicle 127 conditioning 83, 86
161
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
EVERYTHING FROM A TO Z
Configuring settings, refer to Cooling system, refer to Data Directional turn signal,
Vehicle Memory 49 Capacities 157 capacities 157 refer to Turn signal
Consumption, refer to Copyright 2 dimensions 153 indicators 61
Average consumption 71 Cornering Brake Control engine 152 Disc brakes 103
Current fuel consumption 71 (CBC) 72 technical 152 Disengaging the locks, refer to
Contents 2 warning lamp 17 weights 155 Unlocking 26
Control elements, refer to Correct tires 112 Date of the Owner's Manual 7 Displacement, refer to Engine
Cockpit 12 Cosmetic mirror, refer to Daytime running lamps 61 data 152
Convenience operation Illuminated vanity mirror 48 Defrosting and demisting Display elements 13
convertible top 37 Cruise control 65 windows with navigation system or
from outside 26, 27 buttons on the steering air conditioning system 84 Cockpit Chrono Pack 14
glass sunroof, electric 33 wheel 20 automatic climate control 87 Display lighting, refer to
windows 31 indicator lamp 19 Defrosting front windows, refer Instrument lighting 62
Convertible top 35 Cup holders, refer to Beverage to Defrosting and demisting Disposal
care 128 holders 89 windows 84, 87 coolant 122
convenience operation 37 Curb weight, refer to Defrosting windows 84, 87 vehicle battery 144
electrical malfunction 37 Weights 155, 156 air conditioning system 83 Distance covered, refer to
emergency closing 37 Current fuel consumption 71 automatic climate control 86 Odometer 67
malfunction 37 setting units 71 Defrosting windshield, refer to Distance warning, refer to Park
Coolant 122 Cylinders, refer to Engine Defrosting and demisting Distance Control (PDC) 81
indicator lamp 16 data 152 windows 84, 87 Door keys 24
level 123 Defrost setting, refer to Door lock 27
temperature gauge 68 D Defrosting and demisting Doors, locking and unlocking
Coolant temperature 68 Daily odometer, refer to Trip windows 84, 87 acknowledgment
Cooling odometer 67 Demisting windows 84, 87 signals 26, 27
air conditioning mode 86 Dashboard, refer to Cockpit 12 Digital clock 67 from inside 28
cooling function 83 Dashboard lighting, refer to Dimensions 153, 154 from outside 26
Cooling function Instrument lighting 62 Dimming interior rearview DOT quality grades 112
air conditioning system 83 mirror 102 Draft-free ventilation 84, 87
automatic climate control 86 Dipstick, engine oil 121 Drink holders, refer to Beverage
holders 89
162
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
EVERYTHING FROM A TO Z
OVERVIEW
Driving downhill 103 Electrical malfunction Engine Entry to the rear 45
Driving hints, refer to Driving automatic transmission with break-in procedures 102 ESP Electronic Stability
notes 102 Steptronic 58 data 152 Program, refer to Dynamic
Driving lamps, refer to Parking convertible top 37 electronics 18 Stability Control (DSC) 72
lamps/Low beams 60 door lock 27 indicator lamp 18 Exhaust system, refer to
CONTROLS
Driving notes 102 driver's door 27 overheated, refer to Hot exhaust system 104
Driving stability control fuel filler door 106, 107 Coolant temperature Exterior mirrors 48
systems 72 glass sunroof, electric 34 gauge 68 adjusting 48
Driving through water 104 tailgate 30 speed 69 automatic heating 48
Dry air, refer to Cooling Electric glass sunroof 33 starting 53 folding in and out 48
function 83, 86 Electric power windows 31 switching off 54 External audio device 88
OPERATION
Drying air, initializing 32 Engine compartment Eyelet, for towing and tow-
refer to Cooling Electronic Brake Force MINI COOPER and MINI starting 147
function 83, 86 Distribution (EBD) 72 COOPER Convertible 119
DSC Dynamic Stability Electronic Stability Program MINI COOPER S and MINI F
Control 72 (ESP), refer to COOPER S Convertible 120 Failure of an electrical
indicator lamp 17 Dynamic Stability Control Engine coolant 122 consumer 144
REPAIRS
Dynamic Stability Control (DSC) 72 Engine data 152 Fastening safety belts, refer to
(DSC) 72 Emergency operation, refer to Engine oil 121 Safety belts 46
indicator lamp 17 Manual operation adding 121 Filling canister, refer to MINI
convertible top 37 dipstick 121 Mobility System 142
E driver's door 27 indicator/warning lamp 16 Filling hose, refer to MINI
Easy entry to the rear 45 fuel filler door 106, 107 recommended oils 122 Mobility System 142
EBD Electronic Brake Force glass sunroof, electric 34 specified oil grades 122 Filter, refer to
DATA
Distribution 72 tailgate 30 Engine oil level 121 Microfilter 84
transmission lock, automatic indicator/warning lamp 16 Microfilter/Activated-
transmission with Engine oil level, checking 121 charcoal filter 87
Steptronic 56 Engine oil pressure, indicator/ Flat
warning lamp 16 Run Flat tires 77
Engine output, refer to Engine
INDEX
data 152
163
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
EVERYTHING FROM A TO Z
Flat tire Fuel 105 Gear shifts, automatic Heated rear window
Flat Tire Monitor 74, 75 average consumption 71 transmission with air conditioning system 83
MINI Mobility System 141 gauge 67, 68 Steptronic 56 automatic climate control 86
Run-Flat Tires 75 quality 105 General driving notes 102 Heating 82
space-saver spare tire 137 tank capacity 157 Glass sunroof, electric 33 exterior mirrors 48
Tire Pressure Monitor Fuel filler door 105 convenience operation 27 mirrors 48
TPM 76 unlocking in the event of opening and closing in the rear window 83, 86
Flat tire, refer to Changing electrical event of an electrical seats 47
tires 139 malfunction 106, 107 malfunction 34 windshield 83, 86
Flat tire, refer to Tire Fuses 145 remote control 26 Heavy load, refer to Loading 97
condition 113 Glove compartment 88 Height, refer to
Flat Tire Monitor 74 G Gross weight, refer to Dimensions 153, 154
indicator lamp 17 Garage door opener, refer to Weights 155, 156 Height adjustment
issuing a flat tire warning 75 Integrated universal remote seats 43
malfunction 75, 77 control 91 H steering wheel 47
Floor coverings, carpets 128 Gas, refer to Average Handbrake, refer to Parking High beams 61
Floor mats 128 consumption 71 brake 54 bulb replacement 134
Fog lamps 62 Gas, refer to Fuel quality 105 Hazard warning flashers 12 headlamp flasher 61
indicator lamp 62 Gas cap 105 Head airbags 79 indicator lamp 19
Foldable rear backrest 93, 94 Gasoline, refer to Fuel Headlamp flasher 61 High Performance Synthetic
Folding roof, refer to quality 105 indicator lamp 19 Oil, refer to Engine oil 122
Convertible top with Gasoline gauge, refer to Fuel Headlamps recommended oils 122
integrated sliding sunroof 35 gauge 67, 68 bulb replacement 134 specified oils 122
Foot braking, refer to General Gear indicator, for automatic care 127 Holders for beverages 89
driving notes 103 transmission with Headlamp washer reservoir 64 Horn 12
Fresh air nozzles, Steptronic 57 capacity, refer to Hot exhaust system 104
refer to Draft-free Gearshift lever Capacities 157 Hydraulic brake 124
ventilation 84 automatic transmission with Headlamp washer system Hydroplaning 103
Front airbags 79 Steptronic 56 cleaning headlamps 64
Front turn signal indicators, manual transmission 55 washer fluid 64
bulb replacement 134 Head restraints 44
164
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
EVERYTHING FROM A TO Z
OVERVIEW
I Inflation pressure, refer to Tire Jack, refer to Tire change set License plate lamp, bulb
Ice warning, refer to Outside inflation pressure 108 MINI Mobility System 141 replacement 136
temperature warning 70 Inflation pressure monitor, Run-Flat Tires 115 Lifting handle, space-saver
Ignition 53 refer to Flat Tire Monitor 74 space-saver spare tire 137 spare tire 137
Ignition key 24 Inflation pressure monitoring, Jacking points 140 Light-alloy wheels, care 127
CONTROLS
Ignition key positions, refer to refer to Tire Pressure Monitor Jets, refer to Ventilation 84, 87 Light-emitting diodes
Ignition lock 53 TPM 76 Jets, refer to Windshield (LEDs) 136
Ignition lock 53 Inspection 69 washer jets 64 Lighter 90
Illuminated vanity mirror 48 Instrument cluster, refer to John Cooper Works Kit 152 Lighting
Imitation leather 127 Display elements 13 Jump-starting 146 lamps and bulbs 133
Imprint 2 Instrument lighting 62 Lighting of the instruments 62
OPERATION
Index 160 Instrument panel, refer to K Lights on warning 61
Indicator/warning lamp Cockpit 12 Keys 24 Light switch 60
airbags 80 Integrated universal remote Kickdown 57 Loading
ASC 73 control 91 Knock control 105 securing cargo 97
brakes 124 Interior lamp, remote stowing cargo 97
coolant temperature 68 control 26 L Loading the vehicle 95
REPAIRS
DSC 73 Interior lamps 62 Lamp defect 133 Loads, refer to Loading cargo 95
fasten safety belts 46 Interior rearview mirror 48 Lamp replacement, refer to Load securing devices, refer to
Flat Tire Monitor 75 automatic dimming 102 Lamps and bulbs 133 Securing the load 97
fog lamps 62 Interlock, refer to Steering Lamps, refer to Parking lamps/ Locking
reserve fuel capacity 67, 68 locked 53 Low beams 60 from inside 28
Indicator and warning lamps Intermittent operation of the Lamps and bulbs 133 from outside 26
Tire Pressure Monitor wipers 63 Lashing eyelets, refer to Locking/unlocking the vehicle,
DATA
TPM 77 Interval Securing the load 97 acknowledgment
Indicator and warning lamps, display, service 125 LATCH child-restraint fixing signals 26, 27
overview 16 system 52 Low beams 60
Individual air distribution 87 J Leather care 128 bulb replacement 134
Individual settings, refer to Jack 137, 141 LEDs light-emitting diodes 136 Lower back support, refer to
Vehicle Memory 49 points 140 Length, refer to Lumbar support 44
INDEX
Dimensions 153, 154
165
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
EVERYTHING FROM A TO Z
Luggage compartment Maintenance, refer to Service Maximum speed, with winter Multifunction switch
cover 93 and Warranty Information tires 117 turn signal indicator/
emergency operation, refer Booklet for US models, MC operation, refer to headlamp flasher 61
to Manual release 30 Warranty and Service Guide Owner's Manual for Radio washer/wiper system 63
expanding 93 Booklet for Canadian Mechanical keys, refer to
lid, refer to Tailgate 29 models 125 Master keys 24 N
opening/closing, refer to Maintenance system 125 Memory, refer to Vehicle Navigation system, refer to
Tailgate 29 Malfunction Memory 49 separate Owner's Manual
opening from the outside 29 automatic transmission with Microfilter Neck restraints, refer to Head
opening with the remote Steptronic 58 air conditioning system 84 restraints 44
control 26 convertible top 37 automatic climate control 87 New tires 116
volume 155, 156 door lock 27 MINI homepage 6 Non-smoker's equipment
Luggage compartment in the fuel filler door 106, 107 MINI Maintenance System 125 package, refer to Cigarette
MINI 93 glass sunroof, electric 34 MINI manufacturer 6 lighter socket 90
Luggage compartment lid tailgate 30 MINI Mobility System 141 Nylon rope, refer to Towing and
emergency operation, refer tire 116 compressor 142 tow-starting 148
to Manual release 30 Manual air distribution 83 liquid sealant 142
opening with the remote Manual operation Mirrors 48 O
control 26 door lock 27 exterior 48 OBD interface socket 126
Luggage compartment lid, refer driver's door 27 heating 48 Octane number, refer to Fuel
to Tailgate 29 fuel filler door 106, 107 interior rearview 48 quality 105
Luggage compartment net 97 glass sunroof, electric 34 Mobile telephone, refer to Odometer 67
Luggage rack, refer to Roof- power convertible top 37 separate Owner's Manual Oil
mounted luggage rack 98 tailgate 30 Mobility System 141 additives, refer to Adding
Lumbar support 44 transmission lock, automatic Modifications, technical, refer engine oil 122
transmission with to For your own safety 7 dipstick 121
M Steptronic 56 Multifunction steering
M+S tires, refer to Winter Manual transmission 55 wheel 20
tires 117 Master keys with remote
control 24
Maximum cooling 86
166
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
EVERYTHING FROM A TO Z
OVERVIEW
Oil change intervals, refer to Outside temperature Power convertible top 35 Rear fog lamp 62
Service and Warranty warning 70 Power failure 144 bulb replacement 136
Information Booklet for US Overriding the selector lever Power output, refer to Engine indicator lamp 62
models, Warranty and lock 59 data 152 Rear lamps, bulb
Service Guide Booklet for Power supply, refer to Cigarette replacement 135
CONTROLS
Canadian models P lighter socket 90 Rear lamps, refer to Tail
Oil consumption 121 Paintwork care, refer to Vehicle Power windows 31 lamps 135
Oil level 121 paintwork 127 Pressure, tires 108 Rear seats, adjusting head
indicator lamp 16 Park Distance Control (PDC) 81 reinflation using MINI restraints 44
Oil pressure, indicator lamp 16 Parking Mobility System 142 Rear shelf, refer to Luggage
Oil service 69 the vehicle 104 Pressure monitoring of tires, compartment cover 93
OPERATION
Onboard computer 70 Parking aid, refer to Park refer to Tire Pressure Monitor Rear turn signal indicators, bulb
Onboard tool kit 132 Distance Control (PDC) 81 TPM 76 replacement 135
MINI Mobility System 141 Parking brake 54 Protective function, electric Rearview mirror 48
Run-Flat Tires 132 warning lamp 17 glass sunroof 34 Rear window wiper 64, 65
space-saver spare tire 137 Parking lamps 60 Pumping in liquid sealant 142 replacement 133
Opening and closing bulb replacement 134 Recirculated air mode
REPAIRS
from inside 28 Parking lamps/Low beams 60 Q air conditioning system 83
from outside 25 Parking lock, refer to Quality grades, refer to automatic climate control 86
via remote control 26 P Parking 56 Uniform Tire Quality Reclining seat, refer to Backrest
via the door lock 27 Parts and accessories, refer to Grading 112 tilt 44
Outlets, refer to Your individual vehicle 6 Refueling 105
Ventilation 82, 85 Pathway lighting 60 R fuel filler door 105
Outside air 83 PDC Park Distance Control 81 Radiator, refer to Coolant 122 Remaining distance, refer to
DATA
air conditioning system 83 Pinch protection system, Radio, refer to separate Range 70
Outside air mode, automatic glass sunroof, electric 34 Owner's Manual Remaining distance for
climate control 86 Plastic 127 Rain sensor 63 service 69
Outside temperature Pollen, refer to Range 70 Remote control 25, 26
display 70 Microfilter 84 Reading lamps 63 garage door opener 91
changing units 70 Microfilter/Activated- Rear backrest, foldable 93, 94 malfunction 27
INDEX
in the onboard computer 70 charcoal filter 87
167
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
EVERYTHING FROM A TO Z
Remote control key, refer to Runflat System Component Seat adjustment 43 Shiftlock, refer to Range
Master keys with remote RSC, refer to Run-Flat Seat-belt tensioner, refer to selection 56
control 24 Tires 115 Safety belts 47 Shift paddles 58
Replacement key 24 Run-Flat Tires 115 Seat heating 47 Side airbags 79
Replacement of tires puncture 114 Seats Side turn signal indicators, bulb
changing tires 137 replacing 116 heating 47 replacement 135
new wheels and tires 116 tire inflation pressure 109 safe seating position 42 Signal horn, refer to Horn 12
Reporting safety defects 9 winter tires 116 Securing loads, refer to Loading Sitting safely 42
Reserve indicator light, refer to cargo 95 with airbags 42
Fuel gauge 67, 68 S Securing the load 97 with head restraints 42
Reservoir, washing systems 64 Safety belt height Securing the vehicle with safety belt 42
Reservoir for washer fluid 64 adjustment 46 from inside 28 Slipstream deflector, refer to
Restraint systems Safety belts 46 from outside 26 Wind deflector 39
for children 50 care 128 Selector lever, automatic Smoker's equipment package,
refer to Safety belts 46 height adjustment 46 transmission with refer to Ashtray 89
Retaining straps 97 indicator lamp 17, 46 Steptronic 56 Snow chains 117
Reverse reminder 46 Selector lever positions, Socket 12 V 90
automatic transmission with safe seating position 42 automatic transmission with Socket for
Steptronic 56 Safety lock buttons, doors, Steptronic 56 onboard diagnostics 126
manual transmission 55 refer to Locking 28 Selector lever shiftlock, refer to Socket in the luggage
Rod antenna 127 Safety systems, refer to Shiftlock 56 compartment 90
Roller sun blind 34 Airbags 79 Service and Warranty Space-saver spare tire
Roof load, refer to All Season traction Control Information Booklet for US changing tires 137
Weights 155, 156 (ASC) 72 models, Warranty and inflation pressure 109
Roof-mounted luggage rack 98 Antilock Brake System Service Guide Booklet for Spare key 24
Rope, refer to Towing and Tow- (ABS) 72 Canadian models 125 Spare tire, refer to Space-saver
starting 148 Brake system 72 Service interval display 69, 125 spare tire 137
RSC Runflat System Dynamic Stability Control Shifting gears in the automatic Special oils, refer to Specified
Component, refer to (DSC) 72 transmission with engine oils 122
Run-Flat Tires 115 Safety tires, refer to Steptronic 58 Special wash program 126
Run-Flat Tires 115 Specified oils 122
168
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
EVERYTHING FROM A TO Z
OVERVIEW
Speed 152 Start-off assistance, refer to T Temperature warning 70
with Run-Flat Tires 75 DSC 72 Tachometer 69 Tempomat, refer to Cruise
with Run Flat tires 77 Steering lock 53 Tailgate 29 control 65
with the space-saver spare Steering wheel 12 emergency operation 30 Threaded hole for towing
tire 139 buttons on the steering indicator lamp 17 eyelet 148
CONTROLS
with winter tires 117 wheel 20 opening from the outside 29 Three-point safety belt 46
Speedometer 13, 14 settings 47 releasing manually 30 Through-loading system 93, 94
Speedometer, refer to Display Steering wheel lock 53 remote control 26 Tightening the lug bolts
elements 13, 14 Steptronic, refer to Manual Tail lamps, bulb keys 137, 141
Split rear backrest, refer to mode 57 replacement 135 torque 140
Foldable rear backrest 93 Storage compartments 88 Tail lamps, refer to Rear Tightening torque, refer to
OPERATION
Through-loading system 94 Storage space, refer to lamps 135 Tightening the lug bolts 140
Sport program, automatic Luggage compartment in the Tank capacity, refer to Fuel tank Tire change set
transmission with MINI 93 capacity 157 MINI Mobility System 143
Steptronic 57 Luggage compartment in the Tank gauge, refer to Fuel Run-Flat Tires 115
Stability control, refer to MINI Convertible 94 gauge 67, 68 space-saver spare tire 137
Driving stability control Storing the tires 117 Technical data 152 Tire failure 137
REPAIRS
systems 72 Storing the vehicle 129 Technical modifications 7 MINI Mobility System 141
Standing lamps 60 Sun blind, refer to Roller sun Technical modifications, refer space-saver spare tire 137
bulb replacement 134 blind 34 to For your own safety 7 Tire inflation pressure 108
Starting, refer to Starting the Sun visors 48 Telephone call, refer to the reinflation 142
engine 53 Switches, refer to Cockpit 12 Owner's Manual for the Tire pressure monitor, refer to
Starting aid, refer to Jump- Switching off telephone Flat Tire Monitor 74
starting 146 the engine 54 Temperature Tire pressure monitoring, Flat
DATA
Starting problems Switching the cooling function air conditioning system 83 Tire Monitor 74
at very low temperatures 54 on and off manually 83, 86 automatic climate control 86 Tire Pressure Monitor TPM 76
jump-starting 146 Symbols 6 Temperature display resetting the system 76
Starting the engine 53 ice warning 70 system limitations 76
Start-off assistance, refer to outside temperature 70 warning lamp 77
ASC 72 setting units 70
INDEX
Temperature grades 113
169
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
EVERYTHING FROM A TO Z
170
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
EVERYTHING FROM A TO Z
OVERVIEW
Vehicle Memory 49 Wheelslip control Windshield wipers, refer to
Ventilation, draft-free 84, 87 All Season traction Control Washer/wiper system 63
Ventilation, refer to (ASC) 72 Winter tires 117
Air conditioning system 84 Dynamic Stability Control changing 139
Automatic climate control 86 (DSC) 72 condition 113
CONTROLS
Ventilation, refer to Draft-free Wheel stud wrench Run-Flat Tires 116
ventilation 84, 87 MINI Mobility System 141 storage 117
Volume space-saver spare tire 137 Wood paneling 128
luggage Width, refer to Dimensions 153 Work in the engine
compartment 155, 156 Wind deflector 39 compartment 118
Windows, convenience Wrench/screwdriver, refer to
OPERATION
W operation 26, 27 Onboard tool kit 132
Warning and indicator Window washer reservoir 64
lamps 16 capacity, refer to X
Washer/wiper system 63 Capacities 157 Xenon lamps
Washer fluid 64 Window washer system bulb replacement 134
Washer fluid reservoir, washer/wiper system 63
REPAIRS
capacity 157 washer fluid 64 Y
Washer fluid reservoir, refer to Windscreen wipers Your individual vehicle 6
Washer/wiper system 64 replacement 132, 133
Washer systems 64 Windshield, cleaning 64
Washing your vehicle 126 Windshield heating
Water on roadways, deep air conditioning system 83
water 104 automatic climate control 86
DATA
Wear indicators in the tires, Windshield washer jets 64
refer to Tire condition 114 Windshield wiper blades
Weights 155, 156 care 128
Wheel/tire combination 116 replacement 132, 133
Wheelbase, refer to Windshield wipers
Dimensions 153, 154 intermittent operation 63
INDEX
Wheels and tires 116
171
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG
REFUELING
Fuel
Quality
Engine oil
Preferred oil grade
01 41 0 014 845 ue
DRIVE ME.
Online Edition for Part no. 01 41 0 014 845 - 08/07 BMW AG