&
Autodesk Revit 1
Accurate fronts with Autodesk Revit
1. Introductory
The C.G..C. Tec S.r.l. is a firm to the vanguard in the sector of the building coverings, door and
window frames. It is situated in Traona, in province of Sondrio and it works in the domestic field as
well in the international field.
The firm is composed by technician staff highly skilled that they have matured a long experience in
this sector and by specialized workers, capable of perform, without difficulty and in quick and efficient
manner also elaborate works that come require for the famous studies planning, that are used of our
collaboration to realize with successful the prestigious buildings with a high quality of finishes and
functionality.
The personnel of the technical office, constantly up-to date with specific course, can satisfy the more
complex architectural requires using specific programs BIM/CAM always to the vanguard, interface
with outside technical studies and with the plan of production.
We give you the best offer to the different products to can offer a high quality guaranteeing besides a
continuous monitoring of every phase of the planning/production/laying to optimize the management
of orders. Our productive plant is provided with cars to numerical control dedicated to the production
of fronts/door and window frames getting so a high quality.
We take care of our works in the slightest details, from the choice of the materials till the laying and to
the management of the yards making our firm not a simple supplier but a precious and responsible
partner.
The staff guarantees the possibility of relieves on the spot with always up-to-date equipments and
means of transport ones own.
In the optics to furnish an aid to the planners, put to disposition an object bookstore of Autodesk Revit
in free way.
The bookstores have been realize in collaboration with Revilandia (www.revilandia.com) that will take
care of the updating and the future integrations.
Tips
The glued objects can be cancelled even immediately, the families are already loaded automatically
in the projects bookstore and ready to be use.
We recommend to cancel them afterwards since would be comfortable to use Copy ownership to
set quickly yours panels and uprights
After you have made the positioning with Incolla it would appear you a warning related to more
objects in the same position: it may ignore such objects because they only serve to the positioning of
the following spider & stirrup and however we are not calculated.
Then it will be an unbroken front with only glass part and an other with uprights and spiders complete
of stirrup.
Note
It is not possible use only one Unbroken front because the division bar (Grilles of broken front)
determine the centre of uprights and then we would not have necessary backings long the edges or
on the corners. They would be the panels with form not rectangular hold up by a structure to simple
rectangular stitch.
It is possible divide further the broken front of support planning one for only spiders, relevant stirrups
and one for only uprights.
It depends from the result that you want to get.
The uprights are interrupted to every subdivision of the grille then a possible their abacus doesnt bring
the real length of upright but a set of relative lengths to the different pieces that it compose its: with an
unbroken front dedicates only to uprights it is possible carry out the vertical division and then get the
real lengths of uprights.
Usually how to estimate it is enough to know the general weigh, then it doesnt matter that the uprights
are unites or to pieces. We would be have the necessity to verify the maximum lights to schedule the
union pieces among different uprights.
In the examples to follow we use two fronts and we do reference to the next pieces.
The uprights loaded are in the set C_ especially C_100x50mm Galvanized; the spiders of set OX_Vega
with flat stirrup; the glasses CGCT_ glass Blue 3cm.
The user can change the names of the types that you are used in the guide with the names of the types
that you really need.
Select the panels keeping pressed the key Ctrl to add to the selection; or select with a window the
whole front and use the filter; or press the key destro mouse on a selected panel Seleziona pannelli,
from the contextual menu and then Pannelli su host.
The ribbon Modifica Pannelli di facciata continua is activated, from the panel Elemento to choose
the type CGCT_ glass Blue 3cm from the menu to descent.
To select all the panels of the support front (as for the glass panels) and to change the type of Pannello
FC NoSpider: Vuoto con target.
4.2.1 Uprights
From the ribbon Inizio, panel Costruisci, to choose the control Montante.
From the ribbon Posiziona Montante, that it is started up, panel Elemento to choose from the menu of
the types to descent Montante rettangolare: C_100x50mm Zincato.
To select, in order and one to the time, the grilles of vertical front expect the first and the lasted to the
extremity.
Note
Piatta-01 is the type the of stirrup, adapts to a placing on a face of the upright to C as in our case.
OX-Vega-1 is the type of spider composed from the name of the set and the number of the arms, one
in our case.
P19x9x1Zincata are the dimension and the material of the stirrup.
R2PiAcciaio is a type of kneecap and the material, Piatte of 2 cm of ray in steel .
The spiders that we have selected, they are appeared you but the rotation is not right.
To select again the panel to return in the ownership of the petition.
The parameter 1 Nr Rotazioni da 90 set 1 as value.
The parameter 2 Nr Rotazioni da 90 set 2 as value.
The parameter 4 Nr Rotazioni da 90 set 1 as value.
The number show how many rotations have to carry out the arms of the spiders to be in the right
location respect to the glasses that they have to support.
Accept also the negative numbers realizing a counterclockwise rotation, if it overcomes the 4... the
round starts again... (5 is equivalent to 1, -1 to 3, ecc)
To carry out the regulations also for the other panels holdspider to get the correct spiders for the
correct support of the glasses.
With a little practice, the regulation of the rotation can be done at the same time to setting the type of
spider.
To open the glass front previously switch off using the lorgnettes.
From the panel Posizionamento of the ribbon to choose the option Tutte le linee di griglia and then to
select the glass front.
Or to go over with the single upright only the joint that interest you.
4.2.6 Abachi
In the file .Rvt that it contain the bookshop, they are fixed some types of abacuses regarding to the
Sede Legale: Sede Operativa:
Via delle Prese, 6 Via Primo Maggio, 23
23100 * Sondrio 23019 * Traona (SO)
Tel. 0342/653249 - Fax 0342/653738 - sito www.cgctec.it - email info@cgctec.it - Skype cgctec.it
C.F./P.IVA. 00897780144
Facciate puntuali
&
Autodesk Revit 21
uprights, to the spiders, to the glasses and also to the joints in silicone.
This sights (the abacuses are some sights) can be inserted in the current project and if necessary
changed for your need.
From the ribbon Inserisci, panel Importa, to choose the control Inserisci da file > Inserisci viste da
file, appear you a window for the selection of the file: to seek and open the l'.Rvt that it includes the
bookshops.
The file doesnt have opened normally but appear you a window to select, which of the sights that
include it, we want load.
The abacuses, already lay out, are of two types for every object: one with list all the petitions, and one
of summing up with only total or calculation.
Note
When a sight has import from an other file, they come loaded only the planning of the sight and they
dont come loaded the objects that you see or the objects contained in the same.
To change the material that you have and/or the profile, changing the respective parameters.
It is possible define a personalized profile but you must respect the convention of the profiles already
made: to start from an existing profile and you dont start from zero with a new family of profiles.
Note
The Uprights are the system objects and then they exist ONLY in a projects. They use the Profiles
that are external family leaded in special file.
To make easier and speed up the work, in insertion phase and regulation of the spiders in the panels,
they have used the shared family that define globally the stirrup, the spider and the knee-caps.
Every piece (family) has formed from the relative family of stirrups, spiders and knee-caps that have
nested in inside.
Editing a family, you will find in inside of the family the objects that are the families and their
parameter are connected with the principal family to fall.
To create a new stirrup we advise you to start from an existing and to respect the parameter in this
content, punishment the not operation.
In the new family to repeat the operation to obtain the files of the families nested.
At the end of the changes to reload the nested in the principal family and this family reloads in the
project to use the new stirrup/spider.
Note
Only some of the parameter have connected to the family of the panel holderspider to consent
solutions of different stirrups not only as geometry but also as parameter definition.
The personalization of this elements need some experience in the use of Autodesk Revit especially in
the personalization of the families. This type of explanations is beyond from the purpose of the present
guide.
Using our families you can to plan an unbroken front of sharp type but also to verify during the job the
critical points of the project, to obtain abacuses of the elements that you need to make an estimate, to
realize realistic render, exc.
But especially to allow to our technical office to elaborate a detailed estimate in the shortest time.
C.G.C.Tec Srl
Via Primo Maggio, 23
23019 Traona (SO)
P.Iva e C.F. 00897780144
tel: 0342 653 249 - fax: 0342 653 738
www.cgctec.it
info@cgctec.it
In collaborazione con...
www.RevitLandia.com
info@revitlandia.com