Fig. 1 Fig. 2
2
26
C
AME
DI
DIA
handling at all depths. Can be set for slow feed,
high force (two active cylinders) or high
speed, low force (one active cylinder).
Drill in any direction (See Fig. 1,2 and 3)
Standard equipment includes a manually Fig. 3a
operated turntable and worm gear. For easy
positioning an optional hydraulic powered worm
gear is available. Strongly recommended when Simple, robust power unit with a double
the drill rig is fitted with Feed version 3300. hydraulic pump. Double pump permits
independent regulation of feed and rotation.
Electric powered Crawler.
Equipped with a power take-off for driving a flush
Electric powered for drilling operations, but can
pump. Easy access for maintenance.
optionally be equipped with a diesel tramming
kit.
Optional rod rack with stand
DIAMEC 262 ELECTRIC CRAWLER SPECIFICATIONS
600
A choice of three Rotation units
400
1000
Standard High torque Heavy duty
800 0-900 rpm
Speed range 0-2 200 rev/min 0-900 rev/min 0-600 rev/min 600
1 3 5 6 7 9 11 13 15 17 19 21 22
Data rpm (x100)
Power unit 45E with double hydraulic pump Robust all-terrain crawler
The power unit has two variable-flow hydraulic pumps, mounted Max speed 3 km/h (1.9 mph)
in tandem. They are integrated in the hydraulic system in such Max traction force 38 kN (8 550 lbf)
way as to adjust their output to the power requirements of the
drill unit in a most efficient way. Connections for an optional Climbing ability 45
hydraulic driven flush pump are standard. Supplied complete Ground pressure 54 kPa (7.8 psi)
with 70 litre oil tank, oil cooler and filters.
The power unit is powered by an asynchronous electric motor.
Measurements in mm (in.)
800 (31.5)
2 550 (100)
DIAMEC 262
2 120 (83.5)
Diesel
Diatest set (3A), for testing and adjusting the hydraulic system.
Tool set (3B), with tools for service.
Field kit (3C) with replacing instructions.
3A 3B 3C
Atlas Copco reserves the right to make modifications without prior notice.