ETERCURE 6210G
MODIFIED EPOXY CRYLATE
Ingredient Percent CAS Index No. /EC No. Molar mass Molecular formula Symbol
Epoxy Acrylate Oligomer AP 70 55818-57-0
3. Hazards identification
WARNING
PHYSICAL HAZARDS : Unstable(reactive)upon depletion of inhibitor
ACUTE HEALTH EFFECTS : Suspect skin sensitization hazard
Suspect slightly skin irritation hazard
Suspect slightly eye irritation hazard
Respiratory tract irritation hazard
Not expect to be a skin absorption harzard
Not expect to be an ingestion harzard
CHRONIC HEALTH EFFECTS: No data are available on the chronic health hazards of this mixture.
The information contained herein is correct to the best of our knowledge. The recommendations or suggestions contained in this bulletin are made 1
without guarantee or representation as to results. We suggest that you evaluate these recommendations and suggestions in your own laboratory prior to
use. Our responsibility for claims arising from breach of warranty, negligence, or otherwise is limited to the purchase price of the material.
TECHNICAL DATA
ETERCURE 6210G
MODIFIED EPOXY CRYLATE
ETERCURE 6210G
MODIFIED EPOXY CRYLATE
(preferred due to more efficient heat transfer)are recommeded for heating. Do not use localized heat
sources such as drum heater or steam . An air space, preferably an air bubble flow, should be provided for
at all times during heating.
Storage Store in tightly closed. properly vented containers away form: heat. sparks. open flame. strong oxidizers,
radiation, and other initiators. Prevent contamination by foreign materials. Use only non-sparking tools and
limit storage time.
8. Exposure controls/personal protection
Specific control parameter :
Personal protective equipment :
Respiratory protection : If this material is handled at elevated temperature or under mist forming conditions
NIOSH/MSHA approved respiratory protection equipment should be used.
Eye protection : Eye protection such as chemical splash goggles and /or face shield must be worn when
possibility exists for eye contact due to splashing or spraying liquid, airborne particles, or
vapor. Contact lenses should not be worn.
Hand protection : Chemical-resistant gloves should be wore when handing this product.
Industrial hygien : Supply safety shower and eye bath. Wash thoroughly after handling.
9. Physical and chemical properties
The information contained herein is correct to the best of our knowledge. The recommendations or suggestions contained in this bulletin are made 3
without guarantee or representation as to results. We suggest that you evaluate these recommendations and suggestions in your own laboratory prior to
use. Our responsibility for claims arising from breach of warranty, negligence, or otherwise is limited to the purchase price of the material.
TECHNICAL DATA
ETERCURE 6210G
MODIFIED EPOXY CRYLATE
The information contained herein is correct to the best of our knowledge. The recommendations or suggestions contained in this bulletin are made 4
without guarantee or representation as to results. We suggest that you evaluate these recommendations and suggestions in your own laboratory prior to
use. Our responsibility for claims arising from breach of warranty, negligence, or otherwise is limited to the purchase price of the material.
TECHNICAL DATA
ETERCURE 6210G
MODIFIED EPOXY CRYLATE
Special transport method / further data : contact Eternal Chemical Company for transportation information.
15. Regulatory information : -
-
16. Other information
Make people : Professional
post : R&D Chemist
Name(sign) : Mr. Ming Hsin Lu
Make unit : Name : SM technical dept. of SC devision
Phone : 886-7-6963331 ext 547
Address : 22,CHANG-HSIUNG RD,HOU-HSIANG VILLAGE,LU-CHUH HSIANG,KAOSHIUNG
COUNTY,TAIWAN,821
Date of issue : 2005/8/10
DISCLAIMER: While ETERNAL CHEMICAL CO., LTD. Believed that data contained herein areaccurate and derived
from qualified sources the data are not be taken as a warranty or representation for solely for your
consideration, investigation and verification. Any use of these data and information must be
determined by the user to be in accordance with applicable federal, state and local and regulations.
The information contained herein is correct to the best of our knowledge. The recommendations or suggestions contained in this bulletin are made 5
without guarantee or representation as to results. We suggest that you evaluate these recommendations and suggestions in your own laboratory prior to
use. Our responsibility for claims arising from breach of warranty, negligence, or otherwise is limited to the purchase price of the material.