UNIT-1
NOISE
(a) AC voltmeter
(b) DC voltmeter
(a) in the Tx
(c) at destion
(a) binomial
(b) gaussian
(c) poisson
Q.4 one of the following is not a useful quantity for comparing the noise temperature of receiver
Q.5 the effect of noise in a communication system is most advance with reference to
(a) channel
(b) encoder
(c) source
(d) receiver
Q.7 the square of the thermal noise voltage generated in a resistor is proportional
(a)temp.
(c) resistance
(d) bandwidth
(a)(B)1/2
(b) B
(c) B2
(d) 1/B2
Q.9 which none of the above is not external noise
(a) shot
(c) both
(a) Pn=KTB
(b) Pn=4KTBR
(c) Pn=KTR
(d) Pn =4KTR
Q.12 rms noise current for current model of a noisy resistor will be
(a) In=(4TBG)1/2
(b) In=(4KTB)1/2
(c) In=(2KTBR)1/2
(d) In=(KTB)1/2
Q.13 if the several amplifier in series are connected then the equivalent resistor will be
(a) Req=R1+R2+R3
(b) Req=R1+R2/R1+R3+R2
(c) Req=R1+R2/(A1)2+R3/(A1A2)2
(a) Vrms=(KT/C)1/2
(b) Vrms=(C/KT)1/2
(c) Vrms=(2C/KT )1/2
(d) Vrms=(C/KT)1/2
(a) Sw(w)=No/2
(b) Sw(w)=2/No
(c) Sw(w)=No
(a) Pa=Pn/4Rs
(c) Pa=Pn/Rs
(d) Pa=Pn/2Rs
(a) Pa=KT(f)
(b) Pa=KTB
(c) Pa=KT(f/f)
(d) Pa=T(f)
(b) F= (SNR)o/(SNR)I
(a) Teq=To(F-1)
(b) Teq=(F-1)
(c) Teq=ToF
Q.20 the noise figure in terms of the equivalent noise resistance is given by
(a) F=1+Req[(Ra+Rt)/RaRt]
(c) F=Req[(Ra+Rt)/RaRt]
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
a b b c a c a b d d a a c a a a a a a a