Pegler Yorkshire
Unrivalled quality, innovation,
customer service and long-term
value for money
As part of the global Aalberts Industries NV Group,
Pegler Yorkshire is one of Britains largest and most
respected manufacturers of innovative market-leading
products for todays ever more demanding and diverse
plumbing and heating industries.
Behind every one of the companys very Standards
extensive portfolio of famous brand At Pegler Yorkshire we are dedicated to
names are two unparalleled key benefits: designing, developing and manufacturing
more than two hundred years of priceless products of the highest quality. We
expertise and experience combined with are members of numerous standards
continuous investment in research, committees and take an active part in
development, new technology, advanced their development. Our products, where
production facilities and, of course, in applicable, comply with the relevant British,
people dedicated to the task. European and International standards.
Hence Pegler Yorkshires ability to not only Whatever the latest developments, we
sustain but to build upon a reputation guarantee that our products will always
the world over for exceptional quality, meet the latest and highest standards.
performance, reliability and whole-life value
for money.
Increasingly, Pegler Yorkshires substantial
resources are also focused on developing
solutions which, where possible, address
crucial environmental issues such as saving Trade bodies
water and reducing energy consumption Pegler Yorkshire is pleased to be associated
at every opportunity. with several influential organisations within
the industry.
So when you purchase or specify any of
our tried and trusted products, you are
acquiring far more than a means of simply
Construction
doing a job. You are guaranteeing a job Association of
Plumbing and
Products
The Bathroom Association
very well done every time. Heating Contractors Manufacturers
Association
And all backed by impeccable customer
service, training and technical support,
Brass pec
The Brass Page CERTIFICATION LTD
P404, P404UA
In-line thermostatic
mixing valves nSimple to install and service
Prestex in-line mixing valves are designed nTemperature pre-set to 43C, but easily
to eliminate the risk of scalding and are adjustable on site
suitable for use in a wide range of public,
nWRAS approved for a wide variety of uses
health care, social, commercial and
domestic applications. nChoice of standard, easy to service
union connections or 90 angle
Features valve combination
nSuitable for sinks, wash basins, bath, n15mm and 22mm sizes.
bidets, single point showers, hair wash
sprays and domestic hot water systems
P405, P405UA
In-line thermostatic
mixing valves
Prestex in-line mixing valves are designed
to eliminate the risk of scalding and are
suitable for use in a wide range of public, nTemperature pre-set to 43C, but easily
health care, social, commercial and adjustable on site
domestic applications. nWRAS approved for a wide variety of uses
Features nChoice of standard, easy to service
nSuitable for sinks, wash basins, bath, union connections or 90 angle
bidets, single point showers, hair wash valve combination
sprays and domestic hot water systems nSingle valve option to meet TMV3
nSimple to install and service and TMV2 requirements
n15mm and 22mm sizes.
Approvals
n BuildCert Scheme
n BuildCert TMV2 Scheme certifies
These products have been certified by WRAS n Independent third party testing and
Type 2 Thermostatic Mixing Valves for
and are audited periodically. approval scheme.
the domestic market. For use in hot
water systems in domestic premises
TMVA n Complies with EN 1111 : 1999 and
EN 1287 : 1999.
n Part G Section G3 of the building
n
BuildCert TMV3 Scheme certifies Regulations 2000 amended April 2010
Type 3 Thermostatic Mixing Valves now makes the fitting of these valves
manufactured to meet the highest mandatory in New Build properties for
TMVA is a representative trade body for specification required by the NHS bath fill applications.
UK companies within European standards Estates DO8 standard for Mixing Valves
activities. It plays a key part in promoting within healthcare premises in the
the safety of hot water systems. As part United Kingdom
of the TMVA membership we offer a n Complies with BS7942.
comprehensive range of thermo-static
products approved under the BuildCert
scheme.
P402 /P402UA
P402 In-line thermostatic mixing valves*
All ends compression. Copper x copper
A
Size Finish A B Order code
15mm Chrome plate 102 137 5A1101
B
22mm Chrome plate 103 156 5A1102
Flow chart: Fig. 2, page 11
P404 /P404UA
P404 In-line thermostatic mixing valves*
All ends compression. Copper x copper
A
Size Finish A B Order code
15mm Chrome plate 102 137 5A1105
B
22mm Chrome plate 103 156 5A1106
Flow chart: Fig. 1, page 11
6
6 1 Range overview 2 Product details 3 Technical data 4 Other products
2
P405/P405UA
P405 In-line thermostatic mixing valves*
All ends compression. Copper x copper
Size Finish A B Order code A
Technical specication
General operating TMV3 approved
P402 & P402UA, P405 & P405UA parameters parameters
Minimum mixed temperature 30C 38C
Maximum mixed temperature 50C 46C
Maximum temperature deviation +/- 2C +/- 2C
Maximum hot inlet temperature 85C 65C
Maximum hot/cold cold/hot inlet pressure ratio 5 to 1 N/A
Maximum static pressure 12 bar 10 bar
Minimum dynamic flow pressure 0.1 bar 0.2 bar
Minimum hot inlet to mixed outlet temperature differential 10C 10C
Flow with 0.2 bar differential pressure loss 9.0L/M 9.0L/M
Flow 1.0 bar differential pressure loss 18L/M 18L/M
Approvals
THE PRESTEX P402/P402UA & P405/P405UA HAVE BEEN APPROVED BY WRAS
FOR THE FOLLOWING USES:
Code Operating Range Size Application Max temp
HP-B High pressure 15mm, 22mm Bidet 38C
HP-S High pressure 15mm, 22mm Shower 41C
HP-W High Pressure 15mm, 22mm Washbasin 41C
HP-T44 High pressure 22mm Bath 44C
HP-T46 High pressure 22mm Bath 46C (assisted)
LP-B Low pressure 15mm, 22mm Bidet 38C
LP-S Low pressure 15mm, 22mm Shower 41C
LP-W Low pressure 15mm, 22mm Washbasin 41C
Installation conditions
UNDER THE TERMS OF THE BUILDCERT TMV3 SCHEME THE VALVE
MUST BE INSTALLED UNDER THE FOLLOWING CONDITIONS:
Operating Pressure Range Low Pressure High Pressure
Maximum static pressure (bar) 10 10
Flow pressure, hot and cold (bar) 0.2 1 15
Hot supply temperature (C) 52 65 52 65
Cold supply temperature (C) 5 20 5 20
Technical specication
P404 & P404UA, P405* & P405UA* BS EN 1287 : 1999 BS EN 1111 : 1999
Maximum static pressure (bar) 10.0 10.0
Supply pressure hot and cold (bar) 0.1 1.0 1.0 5.0
Hot supply (C) 55 65 55 65
Cold supply (C) Maximum 25 Maximum 25
Mixed water temperature (C) Maximum 46 Maximum 46
Approvals
P404 & P404UA BS EN 1287 : 1999 BS EN 1111 : 1999
15mm and 22mm Low pressure High pressure
0.1 1 bar 1 5 bar
Bidet
Shower
Washbasin
Tub
Bath fill (ISO46 Cold Isolation Test at 46C)
Approvals
P405 & P405UA BS EN 1287 : 1999 BS EN 1111 : 1999
Low pressure 0.1 1 bar High pressure 1 5 bar
15mm 22mm 15mm 22mm
Bidet
Shower
Washbasin
Tub
Bath fill (ISO46 Cold Isolation Test at 46C)
Installation conditions
P404 & P404UA/P405 & P405UA* CONDITIONS OF NORMAL USE:
These products are certified under the
Operating pressure range Low pressure High pressure
BuildCert TMV3 and TMV2 schemes and
Maximum static pressure (bar) 10 10 have been independently tested by an
Flow pressure, hot and cold (bar) 0.1 to 1 1 to 5 approved testing laboratory WRc-NSF and
Hot supply temperature (C) 55 to 65 55 to 65 is a Water Regulations Advisory Scheme
(WRAS) approved product and listed in the
Cold supply temperature (C) <_ 25 <_ 25
Water Fittings and Materials Directory.
The temperature differential for MIXING VALVE must be 10C
*When used as a TMV2 valve add white cap after commissioning for identification.
40
Maintenance
35
Since the installed supply conditions are
likely to be different from those applied
in the laboratory tests, it is appropriate, 30
at commissioning, to carry out some simple
Flow Rate (L/min)
10
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
Pressure (Bar)
15mm TMV 3 22mm TMV 3
*TMV2: This BuildCert Scheme is not referenced in the amended Building Regulations. This independent third party approval scheme ensures that products must
meet the BS EN 1111 and BS EN 1287 standards that are quoted in the amended Building Regulations.
Export
Tel: +44 (0) 1302 855 656
Fax: +44 (0) 1302 730 513
Email: export@pegleryorkshire.co.uk
Technical Help
Free Phone: 0800 156 0050
Free Fax: 0808 156 1012
Email: tech.help@pegleryorkshire.co.uk
Brochure Hotline
Free Phone: 0800 156 0020
Free Fax: 0808 156 1011
ENERGY EFFICIENT SOLUTIONS
Email: info@pegleryorkshire.co.uk
www.pegleryorkshire.co.uk
BATHROOM & KITCHEN SOLUTIONS
Follow us on:
LIT.REF: 880134.06.12