MANUAL
PTS 31.38.01.15
January 2010
PREFACE
PETRONAS Technical Standards (PTS) publications reflect the views, at the time of publication,of
PETRONAS OPUs/Divisions.
They are based on the experience acquired during the involvement with the design, construction,
operation and maintenance of processing units and facilities. Where appropriate they are based on,
or reference is made to, national and international standards and codes of practice.
The objective is to set the recommended standard for good technical practice to be applied by
PETRONAS' OPUs in oil and gas production facilities, refineries, gas processing plants, chemical
plants, marketing facilities or any other such facility, and thereby to achieve maximum technical and
economic benefit from standardisation.
The information set forth in these publications is provided to users for their consideration and
decision to implement. This is of particular importance where PTS may not cover every requirement
or diversity of condition at each locality. The system of PTS is expected to be sufficiently flexible to
allow individual operating units to adapt the information set forth in PTS to their own environment
and requirements.
When Contractors or Manufacturers/Suppliers use PTS they shall be solely responsible for the
quality of work and the attainment of the required design and engineering standards. In particular,
for those requirements not specifically covered, it is expected of them to follow those design and
engineering practices which will achieve the same level of integrity as reflected in the PTS. If in
doubt, the Contractor or Manufacturer/Supplier shall, without detracting from his own responsibility,
consult the owner.
Subject to any particular terms and conditions as may be set forth in specific agreements with users,
PETRONAS disclaims any liability of whatsoever nature for any damage (including injury or death)
suffered by any company or person whomsoever as a result of or in connection with the use,
application or implementation of any PTS, combination of PTS or any part thereof. The benefit of this
disclaimer shall inure in all respects to PETRONAS and/or any company affiliated to PETRONAS
that may issue PTS or require the use of PTS.
Without prejudice to any specific terms in respect of confidentiality under relevant contractual
arrangements, PTS shall not, without the prior written consent of PETRONAS, be disclosed by users
to any company or person whomsoever and the PTS shall be used exclusively for the purpose they
have been provided to the user. They shall be returned after use, including any copies which shall
only be made by users with the express prior written consent of PETRONAS.
The copyright of PTS vests in PETRONAS. Users shall arrange for PTS to be held in safe custody
and PETRONAS may at any time require information satisfactory to PETRONAS in order to
ascertain how users implement this requirement.
PTS 31.38.01.15
January 2010
Page 3
TABLE OF CONTENTS
1. INTRODUCTION ........................................................................................................... 4
1.1 SCOPE ..................................................................................................................... 4
1.2 DISTRIBUTION, INTENDED USE AND REGULATORY
CONSIDERATIONS .............................................................................................. 4
1.3 DEFINITIONS ......................................................................................................... 4
1.4 CROSS REFERENCES ........................................................................................ 4
1.5 SUMMARY OF CHANGES SINCE THE LAST REVISION ............................. 4
1.5.1 Introduction....................................................................................................... 4
1.5.2 Pressure/temperature rating.......................................................................... 4
1.5.3 Piping classes .................................................................................................. 5
1.5.4 Valves ............................................................................................................... 5
1.5.5 Stud bolts .......................................................................................................... 5
1.5.6 Spectacle blinds/spades ................................................................................ 5
1.5.7 Gaskets ............................................................................................................. 5
1.5.8 Miscellaneous .................................................................................................. 5
1.5.9 Impact testing of austenitic stainless steel .................................................. 6
2. PIPING CLASSES SERVICES AND MATERIALS SELECTION INDEX ........ 7
3. PIPING CLASSES ........................................................................................................ 8
4. REFERENCES..9
APPENDICES
1. INTRODUCTION
1.1 SCOPE
This PTS contains the piping classes for exploration and production facilities. The basis of
design of the piping classes is given in PTS 31.38.01.10
This is a revision of the PTS of the same number dated December 1999; a summary of the
changes since the last revision is included in (1.5).
The general requirements for piping systems are specified in PTS 31.38.01.11.
Excluded from the scope of this PTS are:
oil and gas transmission pipeline systems;
piping classes for refineries and chemical plants, which are included in
PTS 31.38.01.12.
This PTS is intended for use in exploration and production facilities, within the property
limits as defined in ASME B31.3 par. 300.1.
If national and/or local regulations exist in which some of the requirements may be more
stringent than in this PTS the Contractor shall determine by careful scrutiny which of the
requirements are the more stringent and which combination of requirements will be
acceptable as regards safety, economic and legal aspects. In all cases the Contractor shall
inform the Principal of any deviation from the requirements of this PTS which is considered
to be necessary in order to comply with national and/or local regulations. The Principal
may then negotiate with the Authorities concerned with the object of obtaining agreement
to follow this PTS as closely as possible.
1.3 DEFINITIONS
The Contractor is the party which carries out all or part of the design, engineering,
procurement, construction, commissioning or management of a project or operation of a
facility. The Principal may undertake all or part of the duties of the Contractor.
The Principal is the party which initiates, and ultimately pays for, the project. The Principal
will generally specify the technical requirements. The Principal may also include an agent
or consultant, authorised to act for the Principal.
The word shall indicates a requirement.
The word should indicates a recommendation.
31380184
Service and Material Selection Index PTS 31.38.01.84, Jan 2010
Symbols and indications of danger for dangerous substances and preparations [1]
Definitions
The following substances and preparations are "dangerous" (EC-Directive 92/32/EEC) [2]:
Explosive substances and preparations: solid, liquid, pasty or gelatinous substances and preparations which may also react
exothermically without atmospheric oxygen thereby quickly evolving gases, and which, under defined test conditions, detonate, quickl
Oxidising substances and preparations: substances and preparations which give rise to a highly exothermic reaction in contact with other
substances, particularly flammable substances.
Extremely flammable substances and preparations: liquid substances and preparations having an extremely low flash-point and a low
boiling-point and gaseous substances and preparations which are flammable in contact with air at ambient temperature and pres
Flammable substances and preparations: liquid substances and preparations having a low flash-point.
Very toxic substances and preparations: substances and preparations which in very low quantities cause death or acute or chronic
damage to health when inhaled, swallowed or absorbed via the skin.
Toxic substances and preparations: substances and preparations which in low quantities cause death or acute or chronic damage to
health when inhaled, swallowed or absorbed via the skin.
Harmful substances and preparations: substances and preparations which may cause death or acute or chronic damage to health when
inhaled, swallowed or absorbed via the skin.
Corrosive substances and preparations: substances and preparations which may, on contact with living tissues, destroy them.
Irritant substances and preparations: non-corrosive substances and preparations which, through immediate, prolonged or repeated
contact with the skin or mucous membrane, may cause inflammation.
Sensitizing substances and preparations: substances and preparations which, if they are inhaled or if they penetrate the skin, are
capable of eliciting a reaction of hypersensitization such that on further exposure to the substance or preparation, charact
Carcinogenic substances and preparations: substances or preparations which, if they are inhaled or ingested or if they penetrate the
skin, may induce cancer or increase its incidence.
Mutagenic substances and preparations: substances and preparations which, if they are inhaled or ingested or if they penetrate the skin,
may induce heritable genetic defects or increase their incidence.
Substances and preparations which are toxic for reproduction: substances and preparations which, if they are inhaled or ingested or if
they penetrate the skin, may produce, or increase the incidence of, non-heritable adverse effects in the progeny and/or
Substances and preparations which are dangerous for the environment: substances and preparations which, were they to enter the
environment, would present or may present an immediate or delayed danger for one or more components of the environment.
Page 1 of 7
Labeling of dangerous substances and preparations
Nature of special risks attributed to dangerous substances and preparations: R- and S-phrases [3]
Page 2 of 7
Labeling of dangerous substances and preparations
Page 3 of 7
Labeling of dangerous substances and preparations
Page 4 of 7
Labeling of dangerous substances and preparations
Page 5 of 7
Labeling of dangerous substances and preparations
Page 6 of 7
Labeling of dangerous substances and preparations
References
[1] Source: EC-Directive 2001/59/EC ; Annex II
[2] Source: EC-Directive 92/32/EEC
[3] Source: EC-Directive 2001/59/EC ; Annex III
Page 7 of 7
PTS 31.38.01.15
January 2010
Page 8
3. PIPING CLASSES
The piping classes for ASME class ratings 150, 300, 600, 900, 1500 and 2500 are
contained in separate file with this PTS number.
The piping classes are in numerical order within each ASME class rating.
PTS 31.38.01.15
January 2010
Page 9
4. REFERENCES
PETRONAS STANDARDS
Piping classes - Basis of design PTS 31.38.01.10
Piping - General requirements PTS 31.38.01.11
Piping classes - Refining and chemicals PTS 31.38.01.12
Selection of materials for life cycle performance (EP) PTS 39.01.10.11
AMERICAN STANDARDS
Pipe flanges and flanged fittings ASME B16.5
Metallic gaskets for pipe flanges ASME B16.20
ring-joint, spiral-wound, and jacketed
Process piping ASME B31.3
Issued by:
American Society of Mechanical Engineers
345 East 47th Street
New York NY 10017
USA
Standard specification for steel castings, carbon, suitable for ASTM A 216
fusion welding, for high-temperature service
Issued by:
American Society for Testing and Materials,
100 Barr Harbor Drive, West Conshohocken,
PA 19428-2959,
USA
BRITISH STANDARDS
Spiral wound gaskets for steel flanges to BS 1560 BS 3381
Issued by:
British Standards Institution
389 Chiswick High Road
London W4 4AL
UK
INTERNATIONAL STANDARDS
Metal ball valves for petroleum, petrochemical and allied ISO 17292
industries
Issued by:
International Organisation for Standardisation
Case Postale 56
Geneva 20 Switzerland CH-1211
Copies can also be obtained from national standards
organizations.
PTS 31.38.01.15
January 2010
Page 10
31380115- January
2010 Revision Summa
31380115- January 2006 - Revision Summary.xls
Valves butterfly
D = deleted
Spade flange
ASME rating
E = extended
Valves gate
P/T rating
R = reviewed/corrected
Meterrun
Gaskets
Previous Current Y = yes
Rating
revision revision
Material Description date date Remarks
15 1480 Carbon steel LT F-Gr Sour 1500 1 B 12/1999 - - Deleted; replaced by PC 151482
1 1482 Carbon steel LT F-Gr Sour 150 1 - - O 01/2006 New
3 1482 Carbon steel LT F-Gr Sour 300 1 - - O 01/2006 New
6 1482 Carbon steel LT F-Gr Sour 600 1 - - O 01/2006 New
9 1482 Carbon steel LT F-Gr Sour 900 1 - - O 01/2006 New
15 1482 Carbon steel LT F-Gr Sour 1500 1 - - O 01/2006 New
25 1485 Carbon steel Sour 2500 1 - - O 01/2006 New
1 1490 Carbon steel LT F-Gr 150 3 C 12/1999 - - Deleted; replaced by PC 11492
3 1490 Carbon steel LT F-Gr 300 3 C 12/1999 - - Deleted; replaced by PC 31492
6 1490 Carbon steel LT F-Gr 600 3 C 12/1999 - - Deleted; replaced by PC 61492
9 1490 Carbon steel LT F-Gr 900 3 C 12/1999 - - Deleted; replaced by PC 91492
15 1490 Carbon steel LT F-Gr 1500 3 B 12/1999 - - Deleted; replaced by PC 151492
1 1492 Carbon steel LT F-Gr 150 3 - - O 01/2006 New
3 1492 Carbon steel LT F-Gr 300 3 - - O 01/2006 New
6 1492 Carbon steel LT F-Gr 600 3 - - O 01/2006 New
9 1492 Carbon steel LT F-Gr 900 3 - - O 01/2006 New
15 1492 Carbon steel LT F-Gr 1500 3 - - O 01/2006 New
1 1500 Carbon steel LT F-Gr Sour 150 3 C 12/1999 - - Deleted; replaced by PC 11502
3 1500 Carbon steel LT F-Gr Sour 300 3 C 12/1999 - - Deleted; replaced by PC 31502
6 1500 Carbon steel LT F-Gr Sour 600 3 C 12/1999 - - Deleted; replaced by PC 61502
9 1500 Carbon steel LT F-Gr Sour 900 3 C 12/1999 - - Deleted; replaced by PC 91502
15 1500 Carbon steel LT F-Gr Sour 1500 3 B 12/1999 - - Deleted; replaced by PC 151502
1 1501 Carbon steel LT F-Gr Sour 150 3 B 12/1999 - - Deleted; replaced by PC 11503
3 1501 Carbon steel LT F-Gr Sour 300 3 B 12/1999 - - Deleted; replaced by PC 31503
6 1501 Carbon steel LT F-Gr Sour 600 3 B 12/1999 - - Deleted; replaced by PC 61503
9 1501 Carbon steel LT F-Gr Sour 900 3 B 12/1999 - - Deleted; replaced by PC 91503
15 1501 Carbon steel LT F-Gr Sour 1500 3 A 12/1999 - - Deleted; replaced by PC 151503
1 1502 Carbon steel LT F-Gr Sour 150 3 - - O 01/2006 New
3 1502 Carbon steel LT F-Gr Sour 300 3 - - O 01/2006 New
6 1502 Carbon steel LT F-Gr Sour 600 3 - - O 01/2006 New
9 1502 Carbon steel LT F-Gr Sour 900 3 - - O 01/2006 New
15 1502 Carbon steel LT F-Gr Sour 1500 3 - - O 01/2006 New
1 1503 Carbon steel LT F-Gr Sour 150 3 - - O 01/2006 New
3 1503 Carbon steel LT F-Gr Sour 300 3 - - O 01/2006 New
6 1503 Carbon steel LT F-Gr Sour 600 3 - - O 01/2006 New
9 1503 Carbon steel LT F-Gr Sour 900 3 - - O 01/2006 New
15 1503 Carbon steel LT F-Gr Sour 1500 3 - - O 01/2006 New
9 1520 Carbon steel Sour 900 3 C 12/1999 - - Hold
15 1520 Carbon steel Sour 1500 3 B 12/1999 - - Hold
25 1520 Carbon steel Sour 2500 3 B 12/1999 - - Hold
9 1521 Carbon steel Sour 900 3 B 12/1999 C 01/2006 Revised (HOLD)
15 1521 Carbon steel Sour 1500 3 A 12/1999 B 01/2006 Revised (HOLD)
25 1521 Carbon steel Sour 2500 3 A 12/1999 B 01/2006 Revised (HOLD)
9 1522 Carbon steel Sour 900 3 - - O 01/2006 New (HOLD)
15 1522 Carbon steel Sour 1500 3 - - O 01/2006 New (HOLD)
25 1522 Carbon steel Sour 2500 3 - - O 01/2006 New (HOLD)
1 3410 Stainl steel AISI 316 150 0 C 12/1999 - - Deleted; replaced by PC 13411
3 3410 Stainl steel AISI 316 300 0 C 12/1999 - - Deleted; replaced by PC 33411
6 3410 Stainl steel AISI 316 600 0 C 12/1999 - - Deleted; replaced by PC 63411
9 3410 Stainl steel AISI 316 900 0 C 12/1999 - - Deleted; replaced by PC 93411
15 3410 Stainl steel AISI 316 1500 0 B 12/1999 - - Deleted; replaced by PC 153411
1 3411 Stainl steel AISI 316 150 0 - - O 01/2006 New
3 3411 Stainl steel AISI 316 300 0 - - O 01/2006 New
6 3411 Stainl steel AISI 316 600 0 - - O 01/2006 New
9 3411 Stainl steel AISI 316 900 0 - - O 01/2006 New
15 3411 Stainl steel AISI 316 1500 0 - - O 01/2006 New
1 3420 Stainl steel AISI 316 Sour 150 0 B 12/1999 - - Deleted; replaced by PC 13421
3 3420 Stainl steel AISI 316 Sour 300 0 B 12/1999 - - Deleted; replaced by PC 33421
6 3420 Stainl steel AISI 316 Sour 600 0 B 12/1999 - - Deleted; replaced by PC 63421
9 3420 Stainl steel AISI 316 Sour 900 0 B 12/1999 - - Deleted; replaced by PC 93421
15 3420 Stainl steel AISI 316 Sour 1500 0 A 12/1999 - - Deleted; replaced by PC 153421
1 3421 Stainl steel AISI 316 Sour 150 0 - - O 01/2006 New
3 3421 Stainl steel AISI 316 Sour 300 0 - - O 01/2006 New
6 3421 Stainl steel AISI 316 Sour 600 0 - - O 01/2006 New
9 3421 Stainl steel AISI 316 Sour 900 0 - - O 01/2006 New
15 3421 Stainl steel AISI 316 Sour 1500 0 - - O 01/2006 New
1 3430 Stainl steel AISI 316 150 0 C 12/1999 D 01/2006 C A D A A Revised
3 3430 Stainl steel AISI 316 300 0 B 12/1999 C 01/2006 C A A Revised
6 3430 Stainl steel AISI 316 600 0 C 12/1999 D 01/2006 C A A Revised
9 3430 Stainl steel AISI 316 900 0 C 12/1999 D 01/2006 C A A Revised
15 3430 Stainl steel AISI 316 1500 0 B 12/1999 C 01/2006 C A D Revised
1 3450 Stainl steel AISI 316 LT 150 0 C 12/1999 - - Deleted; replaced by PC 13451
3 3450 Stainl steel AISI 316 LT 300 0 C 12/1999 - - Deleted; replaced by PC 33451
6 3450 Stainl steel AISI 316 LT 600 0 C 12/1999 - - Deleted; replaced by PC 63451
9 3450 Stainl steel AISI 316 LT 900 0 C 12/1999 - - Deleted; replaced by PC 93451
15 3450 Stainl steel AISI 316 LT 1500 0 B 12/1999 - - Deleted; replaced by PC 153451
1 3451 Stainl steel AISI 316 LT 150 0 - - O 01/2006 New
3 3451 Stainl steel AISI 316 LT 300 0 - - O 01/2006 New
6 3451 Stainl steel AISI 316 LT 600 0 - - O 01/2006 New
9 3451 Stainl steel AISI 316 LT 900 0 - - O 01/2006 New
15 3451 Stainl steel AISI 316 LT 1500 0 - - O 01/2006 New
1 3460 Stainl steel AISI 316 LT Sour 150 0 C 12/1999 - - Deleted; replaced by PC 13461
3 3460 Stainl steel AISI 316 LT Sour 300 0 C 12/1999 - - Deleted; replaced by PC 33461
6 3460 Stainl steel AISI 316 LT Sour 600 0 C 12/1999 - - Deleted; replaced by PC 63461
9 3460 Stainl steel AISI 316 LT Sour 900 0 C 12/1999 - - Deleted; replaced by PC 93461
15 3460 Stainl steel AISI 316 LT Sour 1500 0 B 12/1999 - - Deleted; replaced by PC 153461
31380115- January 2006 - Revision Summary.xls
Page 1
Headings
Page 2
Headings
Page 3
Headings
Page 4
Shname Apcode DN1 DN2 Printflag
Rev 1 1440 TWND NF22 Y Changed
Rev 1 1441 TWND NF22 Y Changed
Rev 1 1450 TWND NF22 Y Changed
Rev 1 1460 TWND NF22 Y Changed
Rev 1 3430 TWND NF22 Y Changed
Rev 1 3831 TWND DS31 Y Changed
Rev 1 3832 TWND DS31 Y Changed
Rev 1 3833 TWND DS31 Y Changed
Rev 1 3834 TWND DS31 Y Changed
Rev 3 1440 TWND NF22 Y Changed
Rev 3 1441 TWND NF22 Y Changed
Rev 3 1450 TWND NF22 Y Changed
Rev 3 1451 TWND NF22 Y Changed
Rev 3 1460 TWND NF22 Y Changed
Rev 3 3430 TWND NF22 Y Changed
Rev 3 3831 TWND DS31 Y Changed
Rev 3 3832 TWND DS31 Y Changed
Rev 3 3833 TWND DS31 Y Changed
Rev 3 3834 TWND DS31 Y Changed
Rev 6 1440 TWND NF22 Y Changed
Rev 6 1441 TWND NF22 Y Changed
Rev 6 1450 TWND NF22 Y Changed
Rev 6 1460 TWND NF22 Y Changed
Rev 6 3430 TWND NF22 Y Changed
Rev 6 3831 TWND DS31 Y Changed
Rev 6 3832 TWND DS31 Y Changed
Rev 6 3833 TWND DS31 Y Changed
Rev 6 3834 TWND DS31 Y Changed
Rev 9 1440 TWND NF22 Y Changed
Rev 9 1441 TWND NF22 Y Changed
Rev 9 1450 TWND NF22 Y Changed
Rev 9 1460 TWND NF22 Y Changed
Rev 9 3430 TWND NF22 Y Changed
Rev 9 3831 TWND DS31 Y Changed
Rev 9 3832 TWND DS31 Y Changed
Rev 9 3833 TWND DS31 Y Changed
Rev 9 3834 TWND DS31 Y Changed
Rev 15 3831 TWND DS31 Y Changed
Rev 15 3832 TWND DS31 Y Changed
Rev 15 3833 TWND DS31 Y Changed
Rev 15 3834 TWND DS31 Y Changed
CLASSNO TEMP LIMIT
11410 0 19.6
11410 50 19.2
11410 75 18.4
11410 100 17.6
11410 120 16.9
11420 0 19.6
11420 50 19.2
11420 75 18.4
11420 100 17.6
11420 120 16.9
11430 0 19.6
11430 50 19.2
11430 75 18.4
11430 100 17.6
11430 120 16.9
11440 0 19.6
11440 50 19.2
11440 75 18.4
11440 100 17.6
11440 120 16.9
11441 0 19.6
11441 50 19.2
11441 75 18.4
11441 100 17.6
11441 120 16.9
11450 0 19.6
11450 50 19.2
11450 75 18.4
11450 100 17.6
11450 120 16.9
11450 150 15.8
11450 200 13.9
11460 0 19.6
11460 50 19.2
11460 75 18.4
11460 100 17.6
11460 120 16.9
11460 150 15.8
11460 200 13.9
11470 -50 18.2
11470 0 18.2
11470 50 18.0
11470 75 17.5
11470 100 17.0
11470 120 16.5
11480 -50 18.2
11480 0 18.2
11480 50 18.0
11480 75 17.5
11480 100 17.0
11480 120 16.5
11490 -50 18.2
11490 0 18.2
11490 50 18.0
11490 75 17.5
11490 100 17.0
11490 120 16.5
11500 -50 18.2
11500 0 18.2
11500 50 18.0
11500 75 17.5
11500 100 17.0
11500 120 16.5
11501 -50 18.2
11501 0 18.2
11501 50 18.0
11501 75 17.5
11501 100 17.0
11501 120 16.5
13410 -20 18.9
13410 0 18.9
13410 50 18.3
13410 75 17.1
13410 100 16.0
13410 120 15.5
13420 -20 18.9
13420 0 18.9
13420 50 18.3
13420 75 17.1
13420 100 16.0
13420 120 15.5
13430 -20 18.9
13430 0 18.9
13430 50 18.3
13430 75 17.1
13430 100 16.0
13430 120 15.5
13430 150 14.7
13430 200 13.5
13450 -100 18.9
13450 0 18.9
13450 50 18.3
13450 75 17.1
13450 100 16.0
13450 120 15.5
13460 -73 18.9
13460 0 18.9
13460 50 18.3
13460 75 17.1
13460 100 16.0
13460 120 15.5
13831 -20 19.9
13831 0 19.9
13831 50 19.5
13831 75 18.6
13831 100 17.6
13831 120 16.9
13832 -20 19.9
13832 0 19.9
13832 50 19.5
13832 75 18.6
13832 100 17.6
13832 120 16.9
13833 -50 19.9
13833 0 19.9
13833 50 19.5
13833 75 18.6
13833 100 17.6
13833 120 16.9
13834 -50 19.9
13834 0 19.9
13834 50 19.5
13834 75 18.6
13834 100 17.6
13834 120 16.9
151410 0 254.2
151410 50 250.4
151410 75 240.2
151410 100 231.9
151410 120 229.5
151420 0 222.3
151420 120 222.3
151430 0 252.4
151430 50 250.4
151430 75 240.2
151430 100 231.9
151430 120 229.5
151440 0 222.3
151440 120 222.3
151441 0 222.3
151441 120 222.3
151450 0 254.2
151450 50 250.4
151450 75 240.2
151450 100 231.9
151450 120 229.5
151450 150 226.0
151450 200 219.1
151460 0 222.3
151460 150 222.3
151460 200 218.8
151470 -50 239.2
151470 0 239.2
151470 50 236.3
151470 75 230.4
151470 100 225.4
151470 120 223.1
151480 -50 222.3
151480 75 222.3
151480 100 222.1
151480 120 221.2
151490 -50 239.2
151490 0 239.2
151490 50 236.3
151490 75 230.4
151490 100 225.4
151490 120 223.1
151500 -50 222.3
151500 75 222.3
151500 100 222.1
151500 120 221.2
151501 -50 222.3
151501 75 222.3
151501 100 222.1
151501 120 221.2
151520 0 222.3
151520 120 222.3
151521 0 222.3
151521 120 222.3
153410 -20 248.2
153410 0 248.2
153410 50 240.5
153410 75 224.8
153410 100 210.9
153410 120 203.4
153410 -20 236.6
153410 0 236.6
153410 50 236.6
153410 75 224.8
153410 100 210.9
153410 120 203.4
153410 -20 228.4
153410 0 228.4
153410 50 228.4
153410 75 224.8
153410 100 210.9
153410 120 203.4
153420 -20 222.3
153420 0 222.3
153420 50 220.4
153420 75 216.3
153420 100 210.9
153420 120 203.4
153430 -20 248.2
153430 0 248.2
153430 50 240.5
153430 75 224.8
153430 100 210.9
153430 120 203.4
153430 150 192.4
153430 200 178.4
153430 -20 236.6
153430 0 236.6
153430 50 236.6
153430 75 224.8
153430 100 210.9
153430 120 203.4
153430 150 192.4
153430 200 178.4
153430 -20 228.4
153430 0 228.4
153430 50 228.4
153430 75 224.8
153430 100 210.9
153430 120 203.4
153430 150 192.4
153430 200 178.4
153450 -100 248.2
153450 0 248.2
153450 50 240.5
153450 75 224.8
153450 100 210.9
153450 120 203.4
153450 -100 236.6
153450 0 236.6
153450 50 236.6
153450 75 224.8
153450 100 210.9
153450 120 203.4
153460 -73 222.3
153460 0 222.3
153460 50 220.4
153460 75 216.3
153460 100 210.9
153460 120 203.4
153831 -20 258.5
153831 0 258.5
153831 50 256.2
153831 75 251.6
153831 100 245.9
153831 120 239.1
153832 -20 222.3
153832 120 222.3
153833 -50 253.9
153833 50 253.9
153833 75 251.6
153833 100 245.9
153833 120 239.1
153834 -50 222.3
153834 120 222.3
16410 0 18.9
16410 50 18.4
18410 0 15.5
18410 60 15.5
18420 0 7.0
18420 60 7.0
251410 0 425.4
251410 50 417.1
251410 75 400.2
251410 100 386.5
251410 120 382.7
251420 0 308.8
251420 120 308.8
251430 0 425.4
251430 50 417.1
251430 75 400.2
251430 100 386.5
251430 120 382.7
251440 0 308.8
251440 120 308.8
251440 0 278.4
251440 120 278.4
251441 0 308.8
251441 120 308.8
251441 0 278.4
251441 120 278.4
251520 0 308.8
251520 120 308.8
251520 0 278.4
251520 120 278.4
251521 0 308.8
251521 120 308.8
251521 0 278.4
251521 120 278.4
253831 -20 425.0
253831 50 425.0
253831 75 419.3
253831 100 409.8
253831 120 398.4
253832 -20 308.8
253832 120 308.8
253833 -50 425.0
253833 50 425.0
253833 75 419.3
253833 100 409.8
253833 120 398.4
253834 -50 308.8
253834 120 308.8
31410 0 50.1
31410 50 50.0
31410 75 48.0
31410 100 46.3
31410 120 45.8
31411 0 50.8
31411 50 50.0
31411 75 48.0
31411 100 46.3
31411 120 45.8
31411 0 42.9
31411 50 42.9
31411 75 42.9
31411 100 42.9
31411 120 42.9
31420 0 50.5
31420 50 50.0
31420 75 48.0
31420 100 46.3
31420 120 45.8
31430 0 51.0
31430 50 50.0
31430 75 48.0
31430 100 46.3
31430 120 45.8
31440 0 51.0
31440 50 50.0
31440 75 48.0
31440 100 46.3
31440 120 45.8
31441 0 51.0
31441 50 50.0
31441 75 48.0
31441 100 46.3
31441 120 45.8
31450 0 50.1
31450 50 50.0
31450 75 48.0
31450 100 46.3
31450 120 45.8
31450 150 45.1
31450 200 43.8
31451 0 50.8
31451 50 50.0
31451 75 48.0
31451 100 46.3
31451 120 45.8
31451 150 45.1
31451 200 43.8
31451 0 42.9
31451 50 42.9
31451 75 42.9
31451 100 42.9
31451 120 42.9
31451 150 42.9
31451 200 42.9
31460 0 50.5
31460 50 50.0
31460 75 48.0
31460 100 46.3
31460 120 45.8
31460 150 45.1
31460 200 43.8
31470 -50 47.9
31470 0 47.9
31470 50 47.3
31470 75 46.0
31470 100 45.0
31470 120 44.6
31480 -50 47.9
31480 0 47.9
31480 50 47.3
31480 75 46.0
31480 100 45.0
31480 120 44.6
31490 -50 47.9
31490 0 47.9
31490 50 47.3
31490 75 46.0
31490 100 45.0
31490 120 44.6
31500 -50 47.9
31500 0 47.9
31500 50 47.3
31500 75 46.0
31500 100 45.0
31500 120 44.6
31501 -50 47.9
31501 0 47.9
31501 50 47.3
31501 75 46.0
31501 100 45.0
31501 120 44.6
33410 -20 49.6
33410 0 49.6
33410 50 48.1
33410 75 45.0
33410 100 42.2
33410 120 40.7
33420 -20 49.6
33420 0 49.6
33420 50 48.1
33420 75 45.0
33420 100 42.2
33420 120 40.7
33430 -20 49.6
33430 0 49.6
33430 50 48.1
33430 75 45.0
33430 100 42.2
33430 120 40.7
33430 150 38.5
33430 200 35.7
33450 -100 49.6
33450 0 49.6
33450 50 48.1
33450 75 45.0
33450 100 42.2
33450 120 40.7
33460 -73 49.6
33460 0 49.6
33460 50 48.1
33460 75 45.0
33460 100 42.2
33460 120 40.7
33831 -20 51.7
33831 0 51.7
33831 50 51.2
33831 75 50.3
33831 100 49.1
33831 120 47.8
33832 -20 51.7
33832 0 51.7
33832 50 51.2
33832 75 50.3
33832 100 49.1
33832 120 47.8
33833 -50 51.7
33833 0 51.7
33833 50 51.2
33833 75 50.3
33833 100 49.1
33833 120 47.8
33834 -50 51.7
33834 0 51.7
33834 50 51.2
33834 75 50.3
33834 100 49.1
33834 120 47.8
61410 0 102.0
61410 50 100.0
61410 75 96.0
61410 100 92.7
61410 120 91.9
61420 0 99.1
61420 50 97.7
61420 75 95.0
61420 100 92.7
61420 120 91.9
61430 0 102.0
61430 50 100.0
61430 75 96.0
61430 100 92.7
61430 120 91.9
61440 0 99.1
61440 50 97.7
61440 75 95.0
61440 100 92.7
61440 120 91.9
61441 0 99.1
61441 50 97.7
61441 75 95.0
61441 100 92.7
61441 120 91.9
61450 0 102.0
61450 50 100.0
61450 75 96.0
61450 100 92.7
61450 120 91.9
61450 150 90.6
61450 200 87.8
61460 0 99.1
61460 50 97.7
61460 75 95.0
61460 100 92.7
61460 120 91.9
61460 150 90.6
61460 200 87.8
61470 -50 95.8
61470 0 95.8
61470 50 94.7
61470 75 92.3
61470 100 90.3
61470 120 89.3
61480 -50 95.8
61480 0 95.8
61480 50 94.7
61480 75 92.3
61480 100 90.3
61480 120 89.3
61490 -50 95.8
61490 0 95.8
61490 50 94.7
61490 75 92.3
61490 100 90.3
61490 120 89.3
61500 -50 95.8
61500 0 95.8
61500 50 94.7
61500 75 92.3
61500 100 90.3
61500 120 89.3
61501 -50 95.8
61501 0 95.8
61501 50 94.7
61501 75 92.3
61501 100 90.3
61501 120 89.3
63410 -20 99.2
63410 0 99.2
63410 50 96.2
63410 75 90.0
63410 100 84.5
63410 120 81.5
63420 -20 99.1
63420 0 99.1
63420 50 96.1
63420 75 89.9
63420 100 84.5
63420 120 81.5
63430 -20 99.2
63430 0 99.2
63430 50 96.2
63430 75 90.0
63430 100 84.5
63430 120 81.5
63430 150 77.0
63430 200 71.1
63450 -100 99.2
63450 0 99.2
63450 50 96.2
63450 75 90.0
63450 100 84.5
63450 120 81.5
63460 -73 99.1
63460 0 99.1
63460 50 96.1
63460 75 89.9
63460 100 84.5
63460 120 81.5
63831 -20 103.4
63831 0 103.4
63831 50 102.5
63831 75 100.6
63831 100 98.3
63831 120 95.6
63832 -20 99.1
63832 75 99.1
63832 100 98.1
63832 120 95.1
63833 -50 103.4
63833 0 103.4
63833 50 102.5
63833 75 100.6
63833 100 98.3
63833 120 95.6
63834 -50 99.1
63834 75 99.1
63834 100 98.1
63834 120 95.1
91410 0 153.0
91410 50 150.1
91410 75 144.0
91410 100 139.1
91410 120 137.8
91420 0 137.5
91420 75 137.5
91420 100 137.3
91420 120 136.7
91430 0 153.0
91430 50 150.1
91430 75 144.0
91430 100 139.1
91430 120 137.8
91440 0 137.5
91440 75 137.5
91440 100 137.3
91440 120 136.7
91441 0 137.5
91441 75 137.5
91441 100 137.3
91441 120 136.7
91450 0 153.0
91450 50 150.1
91450 75 144.0
91450 100 139.1
91450 120 137.8
91450 150 135.7
91450 200 131.3
91460 0 137.5
91460 75 137.5
91460 100 137.3
91460 120 136.7
91460 150 135.7
91460 200 131.3
91470 -50 143.7
91470 0 143.7
91470 50 142.0
91470 75 138.4
91470 100 135.3
91470 120 134.0
91480 -50 137.5
91480 0 137.5
91480 50 137.1
91480 75 136.3
91480 100 135.3
91480 120 134.0
91490 -50 143.7
91490 0 143.7
91490 50 142.0
91490 75 138.4
91490 100 135.3
91490 120 134.0
91500 -50 137.5
91500 0 137.5
91500 50 137.1
91500 75 136.3
91500 100 135.3
91500 120 134.0
91501 -50 137.5
91501 0 137.5
91501 50 137.1
91501 75 136.3
91501 100 135.3
91501 120 134.0
91520 0 137.5
91520 75 137.5
91520 100 137.3
91520 120 136.7
91521 0 137.5
91521 75 137.5
91521 100 137.3
91521 120 136.7
93410 -20 148.9
93410 0 148.9
93410 50 144.3
93410 75 135.0
93410 100 126.7
93410 120 122.2
93420 -20 137.5
93420 0 137.5
93420 50 135.4
93420 75 131.3
93420 100 126.7
93420 120 122.2
93430 -20 148.9
93430 0 148.9
93430 50 144.3
93430 75 135.0
93430 100 126.7
93430 120 122.2
93430 150 115.6
93430 200 106.9
93450 -100 148.9
93450 0 148.9
93450 50 144.3
93450 75 135.0
93450 100 126.7
93450 120 122.2
93460 -73 137.5
93460 0 137.5
93460 50 135.4
93460 75 131.3
93460 100 126.7
93460 120 122.2
93831 -20 155.1
93831 75 155.1
93831 100 154.5
93831 120 152.9
93832 -20 137.5
93832 120 137.5
93833 -50 152.7
93833 50 152.7
93833 75 150.9
93833 100 147.5
93833 120 143.4
93834 -50 137.5
93834 120 137.5
CLASSNO PIPEFROM PIPEUNTIL
11410 15 600
11420 15 600
11430 15 600
11440 15 600
11441 15 600
11450 15 600
11460 15 600
11470 15 600
11480 15 600
11490 15 600
11500 15 600
11501 15 600
13410 15 600
13420 15 600
13430 15 600
13450 15 600
13460 15 600
13831 15 600
13832 15 600
13833 15 600
13834 15 600
16410 15 150
18410 15 100
18420 15 100
31410 15 600
31411 15 250
31411 300 600
31420 15 600
31430 15 600
31440 15 600
31441 15 600
31450 15 600
31451 15 250
31451 300 600
31460 15 600
31470 15 600
31480 15 600
31490 15 600
31500 15 600
31501 15 600
33410 15 300
33420 15 300
33430 15 300
33450 15 300
33460 15 300
33831 15 600
33832 15 600
33833 15 600
33834 15 600
61410 15 600
61420 15 600
61430 15 600
61440 15 600
61441 15 600
61450 15 600
61460 15 600
61470 15 400
61480 15 400
61490 15 400
61500 15 400
61501 15 400
63410 15 200
63420 15 200
63430 15 200
63450 15 200
63460 15 200
63831 15 600
63832 15 600
63833 15 600
63834 15 600
91410 15 600
91420 15 600
91430 15 600
91440 15 600
91441 15 600
91450 15 600
91460 15 600
91470 15 400
91480 15 400
91490 15 400
91500 15 400
91501 15 400
91520 15 400
91521 15 400
93410 15 200
93420 15 200
93430 15 200
93450 15 200
93460 15 200
93831 15 600
93832 15 600
93833 15 400
93834 15 400
151410 15 600
151420 15 600
151430 15 600
151440 15 600
151441 15 600
151450 15 600
151460 15 600
151470 15 400
151480 15 400
151490 15 400
151500 15 400
151501 15 400
151520 15 400
151521 15 400
153410 15 100
153410 150 150
153410 200 200
153420 15 200
153430 15 100
153430 150 150
153430 200 200
153450 15 100
153450 150 150
153460 15 150
153831 15 400
153832 15 500
153833 15 250
153834 15 250
251410 15 300
251420 15 300
251430 15 300
251440 15 100
251440 150 300
251441 15 100
251441 150 300
251520 15 100
251520 150 300
251521 15 100
251521 150 300
253831 15 150
253832 15 300
253833 15 150
253834 15 150