A P P L IC A T IO
ME TR ODE
Metrode 20.70.Nb MIG wire was used extensively during the fabrication of a 3 diame-
ter, 94 high ammonia still column at the ICI maintenance workshop in Northwich.
Complete corrosion resistance and weld integrity was a pre-requisite of the construc-
tion and full verification of the wire by standard weld procedure preceded commence-
ment of the contract.
Using the MIG process, 4 thick carbon manganese steel flanges were built up, groove
welded at their front face and fillet welded at the back, at each end of four sections,
three of carbon steel one of inconel . Branch pipes were welded to the main shell and
the required corrosion resistant flange facings added, again using Metrode 20.70.Nb.