3
The memory card into the card slot (you may need to the amount of outsourcing
Buy memory card), as shown below.
22
4
The battery metal contact end corresponding body shrapnel, and will
A square groove batteries into the fuselage, as shown below.
5
The mobile phone cover gently on the body, and as shown below
In the arrow downward pressing, until completely and fuselage
Fit.
23
3.2 remove the battery, (U) SIM and memory card
1 the mobile phone shutdown and remove external power supply.
Note:
*
In the boot state can directly remove the battery
Can damage the (U) SIM card and mobile phone.
*
In the boot state directly unloaded memory card
May cause the transmission to the mobile phone file lost
The loss of mobile phone, or lead to abnormal phenomenon,
Does not work.
2 remove the cover of mobile phone.
3 according to the direction of the arrow in the diagram below the battery out.
24
4 according to the direction of the arrow in the figure below (U) the SIM card out.
5 the memory card is removed from the card slot, as shown below.
25
3.3 for mobile phone charging
The charger plugged in, then the charger plug
Head is inserted into the mobile phone charging socket, as shown below: