1.4310
Page 1 of 3
C 0,01 to 0,15
Si max. 2,00
Mn max. 2,00
P max. 0,045
S max. 0,015
N max. 0,11
Cr 16,00 to 19,0
Mo max. 0,80
Ni 6,0 to 9,5
Tensile strength across along across along across along across along
1150-1300 0,5 2,5 1,0 3,0 2,0 4,0 2,5 5,0
1300-1500 1,5 3,0 2,0 4,0 2,5 5,0 3,0 7,0
1500-1700 2,0 4,5 2,5 5,0 3,0 7,0 3,5 9,5
1700-1900 2,5 9,0 3,0 9,5 3,5 11 - -
Remark:
All specified values (out of standard EN 10151) have not been tested by Stahl Becker. It seems like the prefix
"" is definitely wrong and has to be . That means, if the thickness is for example 1 mm, tensile strength
1300 to 1500 N/mm, edging across the grain, the quotient of radius of the rod and thickness has to be 3
and not 3.
Data Sheet Spring Steel Strip
1.4310
Page 2 of 3
Delivery condition
Tensile strength
(in Mega Pascal) cold rolled cold rolled and heat treated
approx. 1800 185 195
approx. 1300 179 189
Thickness
All dimensions in mm. Usually strips are produced at normal or fine tolerance. Precision tolerance is available
on demand.
Data Sheet Spring Steel Strip
1.4310
Page 3 of 3
Width
width (w)
w 40 40 < w 125 125 < w < 250 250 < w < 600
thickness t N F P N F P N F P N F P
t < 0,25 + 0,17 + 0,13 + 0,10 + 0,20 + 0,15 + 0,12 + 0,25 + 0,20 + 0,15 + 0,50 + 0,50 + 0,40
0,25 t < 0,50 + 0,20 + 0,15 + 0,12 + 0,25 + 0,20 + 0,15 + 0,30 + 0,22 + 0,17 + 0,60 + 0,50 + 0,40
0,50 t < 1,00 + 0,25 + 0,22 + 0,15 + 0,25 + 0,22 + 0,17 + 0,40 + 0,25 + 0,20 + 0,70 + 0,60 + 0,50
1,00 t < 1,50 + 0,25 + 0,22 + 0,15 + 0,30 + 0,025 + 0,17 + 0,50 + 0,30 + 0,22 + 1,0 + 0,70 + 0,60
1,50 t < 2,50 - - - + 0,40 + 0,25 + 0,20 + 0,60 + 0,40 + 0,25 + 1,0 + 0,80 + 0,60
2,50 t < 3,00 - - - + 0,50 + 0,30 + 0,25 + 0,60 + 0,40 + 0,25 + 1,2 + 1,0 + 0,80
All dimensions in mm and with a lower barrier of -0 mm. The range of tolerance can be shifted upon
agreement. Usually strips are produced at normal or fine tolerance. Precision tolerance is available on
demand.
Length
Tolerance
length l normal special
l 2000 +3 + 1,5
2000 < l 4000 + 5 +2