Catatan
Notes
Criteria 15.4A.1.1 Assessor guide: observe that Assessor guide: confirm that
Products tested for conformance to specifications in Products are tested for conformance to specifications in The product specifications can be identified. The appropriate
accordance with standard operating procedures. accordance with work site procedures. measurements/tests to check conformance to specifications can
be identified.
Criteria 15.4A.2.1 Assessor guide: observe that Assessor guide: confirm that
Test status identification is made on conforming and Inspection results are recorded accurately in accordance The data to be recorded and the frequency of recording required
non-conforming products and records accurately with work site procedures Individuals producing parts/products can be identified. The consequences of not keeping accurate
kept using standard operating procedures. informed of part/product. records can be given conformance/non-conformance to
specification in accordance with work site procedures.
Australian National Training Authority Issue date October 2001 15.4A, V4 Page 1 of 4
Metal and Engineering Industry Competency Standards - Standar Kompetensi Industri Teknik dan Logam
Elemen 15.4A.3 Memberikan umpan balik
Element 15.4A.3 Provide feedback
Kriteria 15.4A.3.1 Pedoman penilai: amati bahwa Pedoman penilai: pastikan bahwa
Produk dites/diperiksa/diukur setelah dilakukan Produk-produk yang dikerjakan ulang/diperbaiki diperiksa untuk Ketidak-sesuaian produk yang bisa dihilangkan dengan cara
pengerjaan ulang atau perbaikan. melihat kesesuaiannya dengan spesifikasi menurut pengerjaan ulang/perbaikan bisa diidentifikasi.
prosedur yang berlaku di tempat kerja.
Criteria 15.4A.3.1 Assessor guide: observe that Assessor guide: confirm that
Products tested/inspected/measured after Reworked/repaired products are tested for conformance to The non-conformances of a product that can be removed by
rework or repair. specification in accordance with work site procedures. rework/repair can be identified.
Kriteria 15.4A.3.2 Pedoman penilai: amati bahwa Pedoman penilai: pastikan bahwa
Kekurangan atau penyimpangan dilaporkan Hasil-hasil penilaian dicatat dengan cermat sesuai dengan prosedur Data yang akan dicatat mengenai produk-produk yang
menurut prosedur operasi standar. yang berlaku di tempat kerja. Individu yang dikerjakan ulang/diperbaiki bisa diidentifikasi.
mengerjakan ulang/memperbaiki part diberitahu
tentang kesesuaian/ketidak-sesuaian produk yang
dikerjakan ulang/diperbaiki dengan spesifikasi menurut
prosedur yang berlaku di tempat kerja.
Criteria 15.4A.3.2 Assessor guide: observe that Assessor guide: confirm that
Deficiencies or deviations reported to standard Inspection results are recorded accurately in accordance with work The data to be recorded with respect to reworked/repaired
operating procedures. site procedures Individual reworking/repairing part informed of products can be identified.
conformance/non-conformance of reworked/repaired product to
specification in accordance with work site procedures.
Range statement
This unit applies to those whose duties include the basic inspection of completed or partly completed products produced by others. Inspection is carried out according to site quality plan or
specifications, and applies to a range of manufacturing enterprises. Uses a range of measuring equipment/devices/tools. Location and frequency of checks/tests and measurements
undertaken to standard operating procedures. In general, verification should be made as close as possible to the point of production of the feature or characteristic. Inspection may involve
Australian National Training Authority Issue date October 2001 15.4A, V4 Page 2 of 4
Metal and Engineering Industry Competency Standards - Standar Kompetensi Industri Teknik dan Logam
"first piece inspection", fixed interval, sample etc. Depending on the inspection process other technical units may need to be accessed, for example, appropriate measurement units. This
unit is not intended to be applied to maintenance personnel carrying out their day-to-day activities, for example, fault finding, remedial and checking activities, these skills are covered by
other units, eg. Unit 18.6A (Dismantle/repair/replace/assemble and fit engineering components).
Pedoman bukti
Konteks penilaian Kondisi penilaian
Unit ini harus dinilai pada pekerjaan. Kompetensi-kompetensi yang Peserta akan diperlengkapi dengan: - Semua peralatan, perlengkapan, material dan dokumentasi yang diperlukan.
meliputi unit ini akan diperagakan secara individual atau sebagai Peserta akan diijinkan mengacu pada dokumen-dokumen berikut: Prosedur yang relevan dengan tempat kerja.
bagian dari suatu kelompok. Lingkungan penilaian jangan sampai Spesifikasi yang relevan dengan produk dan pembuatan. Codes, standar, buku pedoman, dan referensi material
merugikan peserta. yang relevan. Peserta akan diperlukan untuk: - Menjawab pertanyaan yang diberikan oleh Assessor secara lisan atau
menggunakan metode komunikasi lainnya. Mengenal rekan kerja yang dapat membantu mengumpulkan bukti
yang kompeten. Memberikan bukti-bukti yang dapat menunjukkan kemampuan seseorang pada off the job training
yang berkaitan dengan unit ini. Penilai harus yakin bahwa peserta dapat menguasai dan konsisten melakukan seluruh
elemen dalam unit ini sesuai spesifikasi kriteria, termasuk pengetahuan yang diperlukan.
Evidence guide
Assessment context Assessment conditions
This unit should be assessed in the workplace. The competencies The candidate will be provided with: - All tools, equipment, materials and documentation required. The candidate
covered by this unit would be demonstrated by an individual working will be permitted to refer to the following documents: - Any relevant workplace procedures. - Any relevant product
alone or as part of a team. The assessment environment should not and manufacturing specifications. The candidate will be required to: - Orally, or by other methods of
disadvantage the candidate. communication, answer questions put by the assessor. - Identify colleagues who can be approached for the
collection of competency evidence where appropriate. - Present evidence of credit for any off-the-job training
related to this unit. Assessors must be satisfied that the candidate can competently and consistently perform all
elements of the unit as specified by the criteria, including required knowledge.
Australian National Training Authority Issue date October 2001 15.4A, V4 Page 4 of 4