= 1 eVsy /
u
u at a distance y from the plate is given by
U
where v being the kinematic viscosity.
If the velocity of the airstream is 20 m/sec and the volume
extracted by suction is 001 cubic metres per second per
squaremetre of the plate, calculate the displacement thickness,
momentum thickness and skin friction coefficient for the
asymtotic profile. The kinematic viscosity may be taken as equal
to 151016 metres square per second. 4+10+6
dimensional flow. Also discuss its significance for the design of Sketch :
3-hole probe. a) The Flow Pattern ;
Sketch the variation of pressure coefficient around the cylinder
b) pressure distribution along ABC and DEF ;
indicating maximum and minimum values. Discuss the flow of a
real fluid past the cylinder, sketching the flow pattern and the c) pressure distribution along BE.
resultant pressure distribution. The complex potential for a The sketches must be accompanied by a discussion explaining
the flow and pressure distributions. 8+7+5
doublet at the origin with its axis along x-axis is . 10+10
2z
4. A slim elliptical two dimensional sturt is placed at zero incidence
3. A duct of uniform width makes a sharp right angle bend as
in an uniform stream. The ratio of the major to minor axis of the
shown in the figure. The flow may be treated as 2-dimensional.
ellipse is 15.
u
= a + b 2 + c3 + D4 + E .
U