0L
Heated Glass Element: Component Tests and General Diagnostics
Rear End Door Window / Back Window Defogger Wire Inspection
NOTE: Failure to take the following precautions may cause damage of back window defogger.
- When cleaning glass, use a dry cloth to wipe it along heat wire (1) direction.
- When cleaning glass, do not use detergent or abrasive-containing glass cleaner.
NOTE: When measuring wire voltage, use a tester with positive probe (2) wrapped with a tin foil (3) which should be held down on
wire by finger pressure.
Hatchback:
Measure voltage at the center of each defogger wire (1), and check defogger wire condition according to the following table.
For Hatchback:
If found defective, repair defogger wire referring to See: Service and Repair Rear End Door Window / Back Window Defogger Wire Repair.
Heated Glass Element: Service and Repair
Rear End Door Window / Back Window Defogger Wire Repair
5) Leave repaired heat wire as it is for at least 24 hours before operating the defogger again.