2 in. of T/AH fillet weld on 6 in. centers, each side Q/F in. fillet weld, 6 in. long, each side
Fillet Weld
Side Designation
Plug or Slot Weld Not Applicable 1 in. plug welds x Q/S in. deep at 4 in. on-center Flare bevel weld of tube to plate followed by Q/F in. fillet
weld reinforcing
Groove
Bevel
Welds
End Returns
Flare-
Bevel Q/F in. bevel weld with T/AH in. fillet weld reinforcing, one E/K in. square weld with Q/S in. fillet weld reinforcing, both
side sides
References
a. AWS, Standard Symbols for Welding, Brazing and Nondestruction Examination, ANSI/AWS A2.4-86, American Welding Society, Miami,
Florida, 1986.
th
b. AWS, Structural Welding Code Steel, ANSI/AWS D1.1:2000, 17 Edition, American Welding Society, Miami, Florida, 2000.
c. AISC, Load & Resistance Factor Design, Manual of Steel Construction, Third Edition, American Institute of Steel Construction,
Chicago, Illinois, 2001. 6 - Q/S in. studs spaced at 3 in. on-center in one line