TECHNICAL QUIZ
1. Laminations of core are generally made of
(a) case iron (b) carbon (c) silicon steel (d) stainless steel
2. Which of the following could be lamina-proximately the thickness of laminations of a D.C. machine ?
(a) reduce the bulk (b) provide the bulk (c) insulate the core (d) reduce eddy current loss
(a) length of conductor (b) cross-sectional area of the conductor (c) number of conductors
(a) series generator (b) shunt generator (c) long shunt compound generator (d) any of the above
7. In a D.C. generator the number of mechanical degrees and electrical degrees will be the same when
(a) r.p.m. is more than 300 (b) r.p.m. is less than 300 (c) number of poles is 4 (d) number of poles is 2
(a) is the same as that of the main pole ahead (b) is the same as that of the immediately
preceding pole (c) is opposite to that of the main pole ahead (d) is neutral as these poles do not
play part in generating e.m.f.
(a) Lenz's law (b) Ohm's law (c) Faraday's law of electromagnetic induction (d) none of the above
11.If a 3-input NOR gate has eight input possibilities, how many of those possibilities will result in a
HIGH output?
12.A device used to display one or more digital signals so that they can be compared to expected
timing diagrams for the signals is a:
14. What does the small bubble on the output of the NAND gate logic symbol mean?
(a).open collector output (b).tristate (c).The output is inverted (d).none of the above
15.The AND function can be used to ________ and the OR function can be used to ________ .
17. How many buses are connected as part of the 8085A microprocessor?
18. Single-bit indicators that may be set or cleared to show the results of logical or arithmetic
operations are the:
19. What type of circuit is used at the interface point of an output port?
(a).address bus (b).data bus (c). address bus and data bus (d).none of the above
(A).low pass filter (b).high pass filter (c).band pass filter (d).either (a) or (b)
(a).X-Y plotters (b).numerically controlled machining equipment (c).printers (d).all of the above
23. Under normal conditions a diode conducts current when it is
24. As the forward current through a silicon diode increases, the internal resistance