Anda di halaman 1dari 4

Service Information System Pgina 1 de 4

Especificaciones
G3500B Engines
Nmero de medio -RENR2267-13 Fecha de publicacin -01/09/2012 Fecha de actualizacin -10/09/2012

i04906860

Cylinder Head Valves


SMCS - 1105

Nmero de pieza - 206-1561


S/N - CFD1-UP

Nmero de pieza - 206-1561


S/N - ZBC1-UP

Nmero de pieza - 206-1561


S/N - KAD1-UP

Nmero de pieza - 206-1561


S/N - CME1-UP

Nmero de pieza - 206-1561


S/N - CEY1-UP

Nmero de pieza - 206-1561


S/N - L6J1-UP

Ver imagen

17/02/2014
Service Information System Pgina 2 de 4

Illustration 1 g01348827

(1) The valve guide bore does not require machining after installation.

(A) Bore of valve guide before installation ... 9.481 0.008 mm (0.3733 0.0003 inch)

(B) Dimension from top of cylinder head to top of valve guide ... 26.0 1.0 mm (1.02 0.04 inch)

(2) For installation, reduce the temperature of the oil sleeve to -60 C (-76 F).

Note: The valve seat insert does not require machining after installation.

(3) For installation, reduce the temperature of the valve seat insert to -60 C (-76 F). Press the insert
into the cylinder heads counterbore. Do not hammer the valve seat insert.

(C) Counterbore depth ... 16.00 0.15 mm (0.630 0.006 inch)

(D) Outer diameter of valve seat inserts

Inlet valve seat insert ... 60.640 0.015 mm (2.3874 0.0006 inch)
Exhaust valve seat insert ... 60.132 0.015 mm (2.3674 0.0006 inch)

(E) Counterbore diameter

Inlet valve seat insert ... 60.508 0.025 mm (2.3822 0.0010 inch)
Exhaust valve seat insert ... 60.000 0.025 mm (2.3622 0.0010 inch)

(F) Angle of inserts seating surface for valve ... 20.25 0.25 degrees

(G) Distance from bottom of oil sleeve to bottom of chamfer ... 24.7 1.0 mm (0.97 0.04 inch)

17/02/2014
Service Information System Pgina 3 de 4

Ver imagen

Illustration 2 g01348828

(4) 7N-1904 Spring

Length under test force ... 56.36 mm (2.219 inch)


Test force ... 245 25 N (55 5.6 lb)
Free length after test ... 62.5 mm (2.46 inch)
Outside diameter ... 43.92 mm (1.730 inch)

(5) 7N-1903 Spring

Length under test force ... 45.49 mm (1.791 inch)


Test force ... 125 12 N (28 2.7 lb)
Free length after test ... 51.54 mm (2.029 inch)
Outside diameter ... 29.24 mm (1.151 inch)

(6) Coat the valve stem with clean engine oil before assembly.

(H) Diameter of new valve stem in the area of the valve guide ... 9.441 0.010 mm (0.3717 0.0004
inch)

(J) Angle of valve seat ... 20.25 0.25 degrees

17/02/2014
Service Information System Pgina 4 de 4

(K) Diameter of valve head ... 56.00 0.15 mm (2.205 0.006 inch)
Ver imagen

Illustration 3 g03069716
Typical example of the orientation of the inlet valve seats for a swirl combustion head

(L) Orientation of the inlet valve seats ... 45 5 degrees

Copyright 1993 - 2014 Caterpillar Inc. Mon Feb 17 2014 23:02:42 GMT-0400 (Hora estndar oeste, Sudamrica)
Todos los derechos reservados.
Red privada para licenciados del SIS.

17/02/2014

Anda mungkin juga menyukai