Especificaciones
G3500B Engines
Nmero de medio -RENR2267-13 Fecha de publicacin -01/09/2012 Fecha de actualizacin -10/09/2012
i03341711
Ver imagen
Illustration 1 g01414647
(1) Torque for the locknut ... 12.5 1.0 Nm (110 9 lb in)
(5) Torque for the five screws ... 6.5 1.0 Nm (60 9 lb in)
17/02/2014
Service Information System Pgina 2 de 3
(6) Before assembly, lubricate the threads and the bearing surfaces of the setscrew with 4C-5599 Anti-
Seize Compound .
Ver imagen
Illustration 2 g01717353
(7) Exhaust bypass valve
(8) Locknut
(9) Gasket
1. Clean the stud, the locknut, and the base of the locknut prior to assembly.
2. Apply 2P-2333 High Temperature Sealer to the threads of the stud that extend through the flange of
the exhaust bypass valve and to the bottom of the mating face of each locknut.
17/02/2014
Service Information System Pgina 3 de 3
Copyright 1993 - 2014 Caterpillar Inc. Mon Feb 17 2014 23:11:00 GMT-0400 (Hora estndar oeste, Sudamrica)
Todos los derechos reservados.
Red privada para licenciados del SIS.
17/02/2014