W
Rigid foundation 4-5 hatever your requirements, theres a Haas
VMC to meet your needs. Travels range from
Motion control 6-7 8" x 8" x 12" (xyz) for the diminutive Office
Mill, up to 150" x 50" x 50" for the massive
Spindle & spindle drive 8-11
VS-3, and the versatile VF series covers everything between.
Toolchangers 12-13 Table capacities range from 2 tons for our medium and large
machines, up to 5 tons for the VS series.
Chip removal & coolant systems 14-15
The capabilities for Haas VMCs are as varied as the
Distinctive machines 16 machine capacities, with many configurations available,
including 40-taper, 50-taper, geared-head, high-speed,
Operator convenience 17-19
high-production, mold making machines and more. And
Performance enhancements 20-21 the legendary Haas control makes every Haas VMC easy to
operate. Built with the operator and programmer in mind,
Model variations 22-23 its packed with intuitive features you wont find on any
Rotary tables & indexers 24-25 other CNC machining center.
Inside this brochure youll find all the latest technological
The Haas control 26-33
advancements, new machine sizes and capabilities that Haas
Machine configurations & dimensions 34-35 Automation has developed through constant research and
ongoing product development.
Specifications 36-39
2
MODELS:
Office Mill
Mini Mill
Toolroom Mill
Mill/Drill Center
VF-1 & 2
VF-3, 4 & 5
VF-6 11
VF / 50-Taper
Gantry Router
Super Large
Triangulated Wide-Stance
Castings
Get out your tape measure and check the distance
between leveling bolts. Measure the width of the column
and the depth of the saddle. Then look inside the
castings for the heavy-duty, vibration-absorbing ribs
that Haas designs in. Now go measure the competition
youll find they just dont measure up to a Haas.
Specifications subject to change without notice. Not responsible for typographical errors.
4
1 Setup, 5 Sides
Surfaced, Drilled and Tapped
Haas base castings are machined on state-of-the-art, 5-side CNC machines. Each casting is machined,
drilled, tapped and inspected in a single setup to provide higher accuracies and smoother production.
Our ability to precisely machine all critical features of each casting eliminates alignment errors
in final assembly. High-accuracy in-process inspection
guarantees that every casting meets our stringent
quality standards.
Anti-Flex, Reinforced
Base & Column Castings
Our specially designed base and column
castings feature anti-flex, vibration-absorbing
ribs that transfer vibrations away from
the cutting area. The columns feature an
internal torque-tube configuration that yields
superior rigidity and provides the most anti-
flex properties of any design.
Electronic Thermal
Compensation System
When ballscrews rotate, they generate
heat, which can cause them to expand. With
high duty cycles, ballscrew growth can lead
to cutting errors. Our electronic thermal
compensation (ETC) algorithm accurately
models this heating effect and compensates
for screw position.
6
Brushless
Recirculating Ball Guideways Servomotors
Haas uses recirculating ball guideways
for each axis of every VMC. These
guideways are preloaded for zero
clearance, and provide full load-carrying
capacity in all directions. They consume
less power, do not require adjustment
and are proven to outperform sliding
box ways for accuracy and speed. Each
guideway is automatically lubricated to
guarantee long life.
7
Main Spindle Features
Powerful Vector
Spindle Drives
The Haas-designed vector spindle
drive uses closed-loop, digital servo
technology to provide precise speed
control and peak performance under
heavy cutting loads. The system
optimizes the slip angle between
the rotor and stator of the spindle
motor to greatly increase low-speed
torque and accelerations, resulting
in the fastest, most powerful spindle
ever. These drives allow you to push
the spindle to 150 percent of the
motors continuous power rating for
15 minutes, and to 200 percent for
5 minutes. Thats more performance
headroom than other spindle drives
on the market.
Spindle Configurations
Model
TM MM VF-1 VF-2 VF-3 VF-4 VF-5 VF-6 VF-7 VF-8 VF-9 VF-10 VF-11 VM VR VS GR MDC
40 TAPER
50 TAPER
2-SPEED GEARBOX
4,000 / 5,000 RPM * (4K) (5K)
6,000 RPM *
7,500 RPM
10,000 RPM
HIGH-
TORQUE 10,000 RPM *
12,000 RPM *
15,000 RPM *
30,000 RPM *
*Not available on 50-taper machines. Gearbox standard w/50-taper spindle. Gearbox not compatible with all spindle options. All machines available in CT or BT.
See model guide on pages 22 23.
8
On-The-Fly WYE-DELTA Switching High-Capacity Cartridge Spindle (above)
The advanced design of our spindles provides high axial-
Many Haas VMCs feature the Haas Dual-Drive
thrust capability, yet generates minimal heat. The front and
system, which consists of a dual-winding motor
rear bores of the housing and the OD of the spindle are
Wye and Delta and an electronic switch to
finished in one operation. This guarantees perfect alignment
change between the two windings. Selecting the
between the bores and ODs, thus reducing bearing heat.
best winding for low-rpm cutting and the best
winding for high-rpm cutting yields higher torque Our spindles use pre-loaded angular-contact bearings
over a wider rpm range. On-the-fly switching throughout, with the two forward bearings separated by
maximizes acceleration/deceleration rates for more a large spacer to enhance radial stability enabling heavy
chip making and less waiting. cuts in steel. To ensure long life, the spindle is pressurized
with air to prevent coolant contamination, and an air/
oil mixture is injected automatically at preset intervals to
ensure precise lubrication and long bearing life.
PEAK POWER
RPM
Some items shown in this brochure are optional. Please contact your local distributor for assistance.
9
Main Spindle Features
(Standard on all machines except GR, Mini Mill and Toolroom Mill.)
Specifications subject to change without notice. Not responsible for typographical errors.
10
Spindle Head
Thermal Stability
Enhancements
An independent jacket in our head
casting surrounds the spindle. Coolant is
circulated through this jacket to remove heat
generated by the spindle. This minimizes
thermal distortion of the head, eliminating
Y- and Z- axis changes. Because the coolant
touches all parts of the machining area, it
accurately reflects the overall temperature of
the machine.
To improve thermal stability further, weve
insulated the head and increased the air flow
through the spindle-head assembly. Cool air
enters from the rear of the machine, flows
around the spindle and exits at the top, away
from the spindle head.
A spindle chiller is also available for
VF-1 through VF-11 40-taper models. This
option keeps the spindle head at a constant
temperature, even during dry machining.
Movement (Inches)
Y Axis 0.00100
Room Temperature
Z Axis 0.00060
The chart at right shows an 8-hour thermal test of a Haas Temp. 0.00020
0.00000
Super-Speed VMC with inline, direct-drive spindle. The -0.00020
bottom shows spindle speed changes during the test, and -0.00060
the top shows thermal changes in the spindle head over -0.00100
10,000
environment. During the test, the ambient temperature
RPM
6,000
increased from 71 F (22 C) to almost 75 F (24 C), with 2,000
11
Tool Changing
Economical
Electronic Tool
Changer
The standard Haas 40-taper
tool changer is an economical
choice for cost-conscious shops. A
sinusoidal motion arm accelerates
and decelerates the shuttle for
smooth operation, and each
pocket has a retractable cover that
prevents chips from entering the
changer and sticking on the tool
tapers. Simple design and minimal
moving parts guarantee long life
and reliable service.
Optional configuration
40-taper side-mount 24+1 VF-1 thru VF-5 2.8 sec 3.6 sec 3" ( 5"2 )
40-taper side-mount 40+1 VF-2YT thru VF-11 2.8 sec 3.6 sec 3" ( 5"3, 6"4 )
1) VF-5/50 max diameter 4" ( 7" ) 2) VF-5/40 max diameter 3" ( 6" ) 3) VF-2YT to VF-4 4) VF-5 to VF-11
12
SMTC
Tool Change Times
as Short as
1.6
SECONDS
(tool to tool)
Inside
The Haas
Side-Mount
Tool Changer
The synchronized
cycloidal motion of our
side-mount tool changers is
controlled by precision cams
that are manufactured in-house on
custom-built, 5-axis Haas machines.
This rugged, dependable design uses
a special Haas worm-gear drive and an
electronically controlled start/stop system for
long life and maintenance-free operation. Every
Haas SMTC is manufactured completely in-house to
guarantee fast, smooth, reliable operation.
13
Chip Removal
Efficient Free-Flow
Enclosure Design
Haas VMCs provide more uncluttered room
than any other machines in their class. Theres
plenty of space for chips, with no hidden areas
where they can build up. Sloped panels direct
chips to the front of the machine, where the
optional chip auger compresses them, wrings out
the coolant and conveniently discharges them at
the side of the machine.
Chip Auger
People buy CNC machines to make parts
faster. The last thing they want is to waste time
removing chips. Our auger-style chip conveyor
automatically removes chips from the machine,
while compressing them and wringing out the
coolant at the same time. For added reliability,
the system senses torque loads and reverses
automatically if a jam occurs.
14
Coolant Systems
Programmable
Coolant Nozzle (right)
We spent time watching operators
machining parts and noticed they
were constantly opening the doors of
the machine to readjust coolant lines.
Our programmable coolant nozzle is
controlled automatically by the part
program to direct coolant precisely at
the cutting area, eliminating constant
adjustments by the operator. The
nozzle can also be adjusted from the
keypad while a program is running.
Some items shown in this brochure are optional. Please contact your local distributor for assistance.
15
Distinctive Machines
Mill Drill Center with Dual Pallet Changer
For high-volume production of small parts, where cycle times
are short and part loading is frequent, keeping non-cutting time to
a minimum is crucial to maintaining a favorable cost per part.
MDC-500 Travels
X 20" (508 mm)
Y 14" (356 mm)
Z 20" (508 mm)
Load Stations 2
Table Size 20" x 12.75"
(508 x 324 mm)
Capacity 700 lb
(per station, balanced load) (318 kg)
Load Station Change Time 4.7 sec
Office Mills
Haas Office Mills bring CNC performance and reliability to industries that are unable
to fit a normal machine into their facilities. Designed for high-volume production
and/or rapid prototyping of small, high-precision 2D or 3D parts, theyre small enough
to fit through a 36" door, and light enough for most freight elevators.
Specifications
Model OM-1A OM-2A
X 8" (203 mm) 12" (305 mm)
Y 8" (203 mm) 10" (254 mm)
Z 12" (305 mm) 12" (305 mm)
Table Size 20" x 10" (508 x 254 mm)
16
Operator Convenience Features
17
Operator Convenience Features
Automatic Air Gun
Provides a constant blast of air to the cutting tool to clear
chips during dry machining. Activated by M code, the air
gun can be programmed to turn on while the spindle is
turning, or at the end of a cycle. Air consumption for the
auto air gun is 6 scfm.
Specifications subject to change without notice. Not responsible for typographical errors.
18
Haas Wireless
Intuitive Probing
System
The Haas Wireless Intuitive Probing System (WIPS),
with optical transmission for part setting, tool setting and
inspection, consists of the following elements:
19
Performance Enhancements
5-Axis Trunnion Machines Model VF-2 VF-3 VM-2 VM-3 VM-6 VF-4 VF-5 VF-6
5-Axis Trunnion
The Haas Trunnion Series machines are versatile 5-axis Super Speed
machining centers that provide full, simultaneous 5-axis Mold Making
motion for machining complex parts, or can position a
workpiece to almost any angle for multi-side machining.
FEATURES
Dual-Axis Table 16 MB Program Memory
120 Tilt, 360 Rotation USB Port
Side-Mount Tool Changer Remote Jog Handle
Automatic Chip Auger High-Speed Machining
w/Look-Ahead
Programmable Coolant
Nozzle User-Definable Macros
20
VF-SS Super-Speed VMCs The VM Series Speed
Affordable High-Speed and Accuracy for the Mold
Performance Making Industry
The Haas VF-2SS, VF-3SS, VF-4SS, VF-5SS and VF-6SS Designed specifically for mold makers, the VM-2,
high-performance vertical machining centers come standard VM-3 and VM-6 feature the Haas 12,000-rpm, inline
with an innovative 12,000-rpm, inline direct-drive spindle, an direct-drive spindle, a unique 40-taper design that
ultra-fast side-mount tool changer and high-speed rapids for provides superior surface finishes, excellent thermal
reduced cycle times. stability and quiet operation. VM machines come
The all-around enhanced performance of the Super-Speed standard with an automatic chip auger, remote jog
machines yields shorter cycle times and more parts per shift, handle, automatic air gun, high-speed machining, hard
making them some of the more popular innovations offered drive with Ethernet interface, USB port, user-definable
by Haas Automation. macros, programmable coolant nozzle and more.
A unique, multi-fixture table provides T-slots in
both X and Y directions, as well as drilled and tapped
holes and precision dowel-pin bores.
21
Vertical Machining Center Product Line
Office Mills
Toolroom
OM-1A OM-2A TM-1 TM-1P TM-2 TM-3
5 Axis
VF-2TR
22
w/APCs
Mini
VF-3APC | VF-4APC
Mini Mill Super Mini Mill Mini Mill 2 Super Mini Mill 2 APC also available in SS models.
VF-10/50 VF-11/50
Large
VS-1 VS-3
23
Rotary Tables & Indexers
4TH- AND 5TH-AXIS OPTIONS
Adding a fully integrated 4th- or 5th-axis Haas brushless rotary table to
your Haas VMC creates a supercharged machining center package that boosts
your productivity and reduces setups. Fully synchronized 4th- and 5th-axis
configurations are available on most Haas VMC models.
Earlier brush-style Haas rotary tables may be used on new VMCs with an
adapter kit. Contact Haas or your local Haas Factory Outlet for details.
Specifications subject to change without notice. Not responsible for typographical errors.
24
Rotary Tables & Indexers Product Line
Servo Control
SCOLCR SC02-ACR
HA5C
HRT A
HRT SHS
TRT160 TRT210
TRUNNION
Some items shown in this brochure are optional. Please contact your local distributor for assistance.
25
The Haas Control
LED Beacon Light
The Haas-designed beacon light features
ultra-bright LEDs that can easily be seen from
anywhere in the shop. The LEDs generate very
little heat and have a life expectancy of more
than 10 years.
USB Port
The built-in USB port allows the use of
customer-supplied USB flash memory devices.
Multi-Function
Jog Handle
Most machines use the jog handle only to
move the axes around. On Haas machines, the
jog handle can also be used in other modes to
cursor through the program for faster editing,
override spindle speeds and feedrates, or scan
through offsets, parameters, etc.
Dedicated Keypad
The Haas keypad has more than 130 keys.
All common functions, including a full
alphanumeric keypad, are clearly labeled for
One-Button Features operator ease. If youve ever fumbled with hot
Common multi-step functions, such as powering up the machine or keys, or had to page through screens looking
setting tool offsets, have been reduced to the push of a single button. Other for a specific function, then you will appreciate
often-used functions, such as setting part zeros, homing the machine and the simplicity of the Haas control. There are
selecting the next tool during set up, are also one-button commands. no encrypted codes to memorize, and many
functions can be performed simply with the
Dedicated Closed System push of a single button.
Our focus is to provide Haas users with a robust, dependable control that
is seamlessly integrated with the machine. Our closed system is not reliant Stainless Steel Bezel
on PC-based controls or third-party NC suppliers. When you call Haas, you Constructed of heavy-gauge T304 stainless
get a company that takes full responsibility for the entire machine. steel with a fine-grained finish, the bezel of the
Haas control not only looks great, its also easy
to clean, resists wear and will not corrode. (Not
available on all machines.)
Specifications subject to change without notice. Not responsible for typographical errors.
26
Control Features Control Specifications
General
User friendly Microprocessor Triple high-speed 32-bit
Advanced program editor Program execution speed 1,000 blocks/sec standard
Axis control 3 axes linear, 4th and 5th axes optional
Brushless AC servo drives
Interpolation G01, G02, G03, helical
Up to 833 ipm cutting feedrates Min. input increment inch mode 0.0001"
Triple 32-bit processors metric mode 0.001 mm
Min. output resolution 0.0000072" (0.000 18 mm)
Executes up to 1,000 blocks/second
Feed Functions
ISO standard G-code compatibility
Rapid Traverse Override 5%, 25%, 50%, 100%
Haas one-button power-up Feedrate Override 0% to 999% in 1% increments
Haas one-button tool offset entry Jog Handle Resolution inch mode 0.0001"/0.001"/0.01"/0.1" per handle division
metric mode 0.001/0.01/0.1/1.0 mm per handle division
200 tool offsets Jog Feeds inch mode 0.1/1.0/10.0/100.0 ipm
105 work coordinates metric mode 1.0/10/100/1000 mm/min.
Zero Return One key (G28)
Tool load monitoring
Tool life management Spindle Functions
Speed Command S = 1 to max spindle rpm
Helical interpolation
Override 0% to 999% in 1% increments
Background editing
Tool Functions
Split-screen program review Length Compensation 200 sets, geometry & wear
Trig calculator Diameter/Radius Compensation 200 sets, geometry & wear
Length Measurement Automatic length storage
Tangent calculators
Life Management 200 sets w/alarms
Speeds and feeds calculator Selection Txx command
Arc calculator
Programming
RS-232 / DNC link / USB / optional Ethernet Compatibility ISO standard G code
Positioning Absolute (G90), incremental (G91)
Mid-program restart
Canned Cycles 22 functions standard
Inch or metric programming Circular Pocket Milling G12, G13
Message page Bolt-Hole Drilling G70, G71, G72
Advanced Pocket Milling G150
Selectable languages Inch/Metric Switchable
Self-diagnostics Work Coordinates 105 sets
Part Zero Set Automatic storage
Fully descriptive alarms
M Code Outputs 5 spare
Programmable mirror imaging 2D Cutter Diameter Compensation G40, G41, G42
Advanced pocket milling 2D Cutter Length Compensation G43, G44, G49
3D+ Cutter Diameter Compensation G141
Bolt-hole drilling 5-Axis Tool Length Compensation G143
Graphic dry run
Data Input/Output
5 spare M functions Communications Port RS-232, USB
Contour accuracy control Data Rate To 115,200 baud
Some items shown in this brochure are optional. Please contact your local distributor for assistance.
27
Intuitive Programming System
Simple, intuitive and more powerful than ever
3
Once all necessary information is entered, pushing Cycle
1 2
Use the top Further define Fill in the
Start performs the desired operation. Multiple operations tab menu your specific information
can be recorded and saved as a single G-code program that to select cutting when
can be played back to duplicate the part. This program can the type of operation by prompted
be transferred to any other Haas VMC and run without operation choosing from by the control
to perform. the lower set and press Cycle
editing. Help menus are available directly on screen, and
of tabs. Start.
a graphic dry-run feature allows operators to check their
work before running a part.
Novice operators quickly learn both basic programming Using plain language, simple graphics and easy-to-follow steps, the Haas
and the finer points of using the Haas control by working Intuitive Programming System guides the operator through the steps necessary
with the Intuitive Programming System. to machine a part.
28
DXF File Import
The G-code vs. conversational programming debate has The Haas control provides the best of both G-code and
been going on for years in the machine tool industry, with conversational-style systems. It doesnt force the user into
both sides trying to fit all customers and all parts into one one method of operation. The Haas control weaves them
box. The conversational-style camp cant or wont see the into a simple, coherent control system: Use manual or CAM
merits of a CAM generated G-code program. The CAM generated G-code, or use the Intuitive Programming Sys-
group can never see the advantage of setting up a job and tem or mix them. Use the programming strategy that is best
generating the program quickly at the machine. The fact is, for the part; the Haas control will accept them all.
both methods are reasonable and desirable under the right
conditions. The Haas control is unique in this regard, as it
is very good at both methods of operation, and the addition
of *.dxf import takes it to a new
level of capability.
Haas addition of *.dxf import
capability to the Intuitive
Programming System allows a
programmer to simply im-
port a *.dxf file into the Haas
control, select features on the
file holes, threading, pockets,
islands or contours and gener-
ate the toolpath. The program
output is standard G-code
easy to understand and edit. By
taking advantage of the editing
functions of the Haas control,
the user can modify features,
change the order of operations
or even conveniently put them
into other programs all at the
control, without going back to
a computer to repost a CAM-
generated program.
Some items shown in this brochure are optional. Please contact your local distributor for assistance.
29
High-Speed Machining
The High-Speed Machining option for Many of todays high-speed controls
Haas machining centers is a powerful are either very expensive or require a pre- HSM BENEFITS
tool to reduce cycle times and improve processing mode or special post, which
accuracy. Testing on complex 3- to 5-axis is time consuming and alters the G-code Greatly reduces
applications has shown drastic reductions program. The Haas HSM option accepts
cycle times
in cycle times, as well as increased accuracy ISO standard G code from all major CAM
and smoother motion. systems, and is only a fraction of the cost Full look-ahead
of other high-speed controls. up to 80 blocks
Using a motion algorithm called
acceleration before interpolation, Up to 833 ipm
combined with up to 80 blocks of look- contouring
ahead, the HSM option allows contouring
feedrates up to 833 ipm without risk of Acceleration before
distortion to the programmed path. All interpolation
programmed motions are accelerated
before interpolation to ensure that the ISO standard G-code
movement of each axis does not exceed programming
the acceleration capability of the machine.
Higher accuracy
The look-ahead algorithm determines the
fastest feedrate at which each stroke Smoother motion
can be blended into the next without
stopping. This results in higher accuracy,
smoother motion and a higher actual
feedrate even with complex part
geometry.
Specifications subject to change without notice. Not responsible for typographical errors.
30
4th- and 5th-Axis Control User-Definable Macros
Allows the use of 4th- and 5th-axis rotary tables for multi-side Create subroutines for custom canned
machining or machining complex contours and shapes, such as cycles, probing routines, operator prompting,
impellers. Increases productivity and reduces setups. math equations or functions, and family-of-
parts machining with variables.
Coordinate Rotation/Scaling
Use rotation in conjunction with work offset probing to speed
Engraving
workpiece set up, or use it to rotate a pattern to another location By using a single block of code, you can
or around a circumference, etc. Use scaling to reduce or enlarge a easily engrave any text string enclosed in
toolpath or pattern. parentheses. Sequential part numbers can be
engraved by using the standard serializing
Second Home Position function.
31
The Hidden Power Inside the
HELP/CALC
The Help function is a built-in, searchable operators manual that explains
the various functions of a Haas machine. Simply type in a keyword to quickly
find a specific topic, or hit F1 for G-code help and F2 for M-code help.
The Calculator pages are another powerful tool. There are calculators for
solving triangle equations, circle-circle-tangent equations and circle-line-
tangent equations, as well as a speeds-and-feeds calculator. Also included
are a standard math calculator, a drill-and-tap chart, a decimal-equivalent
chart and a time-and-date function. These calculators simplify machining
operations and speed math calculations, and the solution to any equation
can easily be pasted into a program directly from the calculators.
Specifications subject to change without notice. Not responsible for typographical errors.
32
Advanced Tool Management
Haas Control To maximize productivity, the Haas control has an integrated Advanced
Tool Manager that allows you to create a group of redundant tools for use
within a program. From a single screen, you can view the different tool
groups and their parameters. Simply define which tool numbers are part of
a group, and what parameter will determine when to change to a redundant
tool. This can be based on feed time, the number of tool calls,
the number of holes drilled or tapped, or a preset load limit.
Some items shown in this brochure are optional. Please contact your local distributor for assistance.
33
Machine Configurations & Options
= Available configuration = Standard on 40-taper machines = Optional on 40-taper machines = Standard on 50-taper machines = Optional on 50-taper machines
SPINDLE CONFIGURATIONS TM MM VF-1 VF-2 VF-3 VF-4 VF-5 VF-6 VF-7 VF-8 VF-9 VF-10 VF-11 VM VR VS GR MDC SS
40-TAPER SPINDLE
50-TAPER SPINDLE
2-SPEED GEARBOX
CT SPINDLE
BT SPINDLE
5,000 RPM
10,000 RPM
HIGH-TORQUE 10,000 RPM
12,000 RPM
15,000 RPM
30,000 RPM
TOOL CHANGERS TM MM VF-1 VF-2 VF-3 VF-4 VF-5 VF-6 VF-7 VF-8 VF-9 VF-10 VF-11 VM VR VS GR MDC SS
24-POCKET SMTC
30-POCKET SMTC
40-POCKET SMTC
SPECIAL MACHINES TM MM VF-1 VF-2 VF-3 VF-4 VF-5 VF-6 VF-7 VF-8 VF-9 VF-10 VF-11 VM VR VS GR MDC SS
SUPER-SPEED MODEL
5-AXIS TRUNNION MODEL
SPECIAL OPTIONS TM MM VF-1 VF-2 VF-3 VF-4 VF-5 VF-6 VF-7 VF-8 VF-9 VF-10 VF-11 VM VR VS GR MDC SS
AUTO AIR GUN
AUX. COOLANT FILTER
AUTO PALLET CHANGER
AUTOMATIC CHIP AUGER
DUST EXTRACTION SYSTEM
EXTENDED Z AXIS
EXTENDED Y AXIS
EXTENDED X AXIS
95-GALLON COOLANT TANK
LINEAR SCALES *
PROGRAMMABLE COOLANT
THROUGH-SPINDLE COOLANT
EXTRA RAPID TRAVERSE
HIGH-INTENSITY LIGHTING
BASIC SPINDLE CHILLER
AUTOMATIC DOOR
CONTROL OPTIONS TM MM VF-1 VF-2 VF-3 VF-4 VF-5 VF-6 VF-7 VF-8 VF-9 VF-10 VF-11 VM VR VS GR MDC SS
EXPANDED MEMORY
4TH-AXIS DRIVE
5TH-AXIS DRIVE
8 ADDITIONAL M FUNCTIONS
COORD. ROTATION/SCALING
HARD DISK/ETHERNET
RIGID TAPPING
HIGH-SPEED MACHINING
USER-DEFINABLE MACROS
REMOTE JOG HANDLE
SPINDLE ORIENTATION
INTUITIVE PROGRAMMING
TOOL & PART PROBING
Important: The above chart represents the standard configurations of machines distributed in North America. Machine configurations and availability may differ for other countries and regions.
This chart is for reference only. Check with your local Haas distributor for exact pricing, configuration and availability of machines and options. *X-axis scale only.
34
Machine Dimensions
A
B (max)
Y
W
C
X
E
0.640"
16.3 mm
0.630"
16 mm
L
F
G 1.06" 0.42"
M 26.9 mm 10.7 mm
K H
J
I
Side View VF-1 VF-2 VF-3 VF-4 VF-5 VF-6 VF-7 VF-8 VF-9 VF-10 VF-11
A 92.80" 92.80" 110.00" 110.00" 114.00" 123.00" 123.00" 139.00" 139.00" 123.00" 139.00"
2357 mm 2357 mm 2794 mm 2794 mm 2895 mm 3124 mm 3124 mm 3531 mm 3531 mm 3124 mm 3531 mm
B (40 Taper) 104.50" 104.50" 117.50" 117.50" 118.20" 124.00" 124.00" 124.00" 124.00" 124.00" 124.00"
2654 mm 2654 mm 2985 mm 2985 mm 3002 mm 3150 mm 3150 mm 3150 mm 3150 mm 3150 mm 3150 mm
B (50 Taper) 126.50" 138.00" 138.00" 138.00" 138.00" 138.00" 138.00"
3213 mm 3505 mm 3505 mm 3505 mm 3505 mm 3505 mm 3505 mm
C 58.00" 58.00" 74.40" 74.40" 82.88" 94.00" 94.00" 110.00" 110.00" 98.00" 110.00"
1473 mm 1473 mm 1890 mm 1890 mm 2105 mm 2388 mm 2388 mm 2794 mm 2794 mm 2489 mm 2794 mm
D 36.00" 36.00" 36.00" 36.00" 36.00" 30.00" 30.00" 30.00" 30.00" 30.00" 30.00"
914 mm 914 mm 914 mm 914 mm 914 mm 762 mm 762 mm 762 mm 762 mm 762 mm 762 mm
Front View VF-1 VF-2 VF-3 VF-4 VF-5 VF-6 VF-7 VF-8 VF-9 VF-10 VF-11
E 88.00" 88.00" 122.00" 122.00" 137.00" 156.00" 183.00" 156.00" 183.00" 257.00" 257.00"
2235 mm 2235 mm 3099 mm 3099 mm 3480 mm 3962 mm 4648 mm 3962 mm 4648 mm 6528 mm 6528 mm
F 64.00" 64.00" 67.20" 67.20" 70.50" 76.00" 76.00" 76.00" 76.00" 76.00" 76.00"
1626 mm 1626 mm 1707 mm 1707 mm 1791 mm 1930 mm 1930 mm 1930 mm 1930 mm 1930 mm 1930 mm
G 42.95" 42.95" 46.15" 46.15" 49.15" 55.15" 55.15" 55.15" 55.15" 55.15" 55.15"
1091 mm 1091 mm 1172 mm 1172 mm 1248 mm 1401 mm 1401 mm 1401 mm 1401 mm 1401 mm 1401 mm
H 32.00" 32.00" 30.30" 30.30" 33.20" 33.07" 33.07" 33.07" 33.07" 33.07" 33.07"
813 mm 813 mm 770 mm 770 mm 843 mm 840 mm 840 mm 840 mm 840 mm 840 mm 840 mm
I (Door Opening) 35.50" 35.50" 48.50" 48.50" 54.00" 69.00" 84.75" 69.00" 84.75" 122.00" 120.13"
902 mm 902 mm 1232 mm 1232 mm 1372 mm 1753 mm 2153 mm 1753 mm 2153 mm 3099 mm 3051 mm
J 30.00" 30.00" 42.50" 42.50" 42.50" 60.00" 60.00" 60.00" 60.00" 60.00" 60.00"
762 mm 762 mm 1080 mm 1080 mm 1080 mm 1524 mm 1524 mm 1524 mm 1524 mm 1524 mm 1524 mm
K 27.54" 27.54" 27.31" 27.31" 27.31" 27.23" 27.23" 27.23" 27.23" 21.14" 21.14"
700 mm 700 mm 694 mm 694 mm 694 mm 692 mm 692 mm 692 mm 692 mm 537 mm 537 mm
L 21.81" 21.81" 20.86" 20.86" 11.18" 21.72" 9.30" 21.72" 9.30"
554 mm 554 mm 530 mm 530 mm 284 mm 552 mm 236 mm 552 mm 236 mm
M 33.00" 33.00" 36.50" 36.50" 36.50" 43.00" 43.00" 43.00" 43.00" 43.00" 43.00"
838 mm 838 mm 927 mm 927 mm 927 mm 1092 mm 1092 mm 1092 mm 1092 mm 1092 mm 1092 mm
Table VF-1 VF-2 VF-3 VF-4 VF-5 VF-6 VF-7 VF-8 VF-9 VF-10 VF-11
W 2.08" 2.08" 2.70" 2.70" 2.05" 4.16" 4.16" 3.24" 3.24" 4.16" 4.16"
52.8 mm 52.8 mm 68.6 mm 68.6 mm 52.1 mm 105.7 mm 105.7 mm 82.3 mm 82.3 mm 105.7 mm 105.7 mm
X 26.00" 36.00" 48.00" 52.00" 52.00" 64.00" 84.00" 64.00" 84.00" 120.00" 120.00"
660 mm 914 mm 1219 mm 1321 mm 1321 mm 1626 mm 2134 mm 1626 mm 2134 mm 3048 mm 3048 mm
Y 14.00" 14.00" 18.00" 18.00" 23.00" 28.00" 28.00" 36.00" 36.00" 28.00" 28.00"
356 mm 356 mm 457 mm 457 mm 584 mm 711 mm 711 mm 914 mm 914 mm 711 mm 711 mm
Z 4.92" 4.92" 3.15" 3.15" 3.15" 4.92" 4.92" 4.92" 4.92" 4.92" 4.92"
125.0 mm 125.0 mm 80.0 mm 80.0 mm 80.0 mm 125.0 mm 125.0 mm 125.0 mm 125.0 mm 125.0 mm 125.0 mm
T-Slots VF-1 VF-2 VF-3 VF-4 VF-5 VF-6 VF-7 VF-8 VF-9 VF-10 VF-11
Number on Table 3 3 5 5 7 5 5 7 7 5 5
Specifications subject to change without notice. Not responsible for misprints or typographical errors. Note: Overall shipping dimensions vary; contact Haas for details.
35
Machine Specifications (Standard 40-Taper Machines)
1) 5-minute rating. 2) See page 12 for optional tool changer specifications. 3) Linear scales required to achieve accuracy listed.
36
VF-6 VF-7 VF-8 VF-9 VF-10 VF-11 VM-2 VM-3 MDC
64" 84" 64" 84" 120" 120" 30" 40" 20"
1 626 mm 2 134 mm 1 626 mm 2 134 mm 3 048 mm 3 048 mm 762 mm 1016 mm 508 mm
32" 32" 40" 40" 32" 40" 20" 26" 14"
813 mm 813 mm 1 016 mm 1 016 mm 813 mm 1 016 mm 508 mm 660 mm 356 mm
30" 30" 30" 30" 30" 30" 20" 25" 20"
762 mm 762 mm 762 mm 762 mm 762 mm 762 mm 508 mm 635 mm 508 mm
4 - 34" 4 - 34" 4 - 34" 4 - 34" 4 - 34" 4 - 34" 4 - 24" 4 - 29" 4 - 24"
102 - 864 mm 102 - 864 mm 102 - 864 mm 102 - 864 mm 102 - 864 mm 102 - 864 mm 102 - 610 mm 102 - 737 mm 102 - 610 mm
64" 84" 64" 84" 120" 120" 36" 54" 20"
1 626 mm 2 134 mm 1 626 mm 2 134 mm 3 048 mm 3 048 mm 914 mm 1 372 mm 508 mm
28" 28" 36" 36" 28" 28" 18" 25" 12.75"
711 mm 711 mm 914 mm 914 mm 711 mm 711 mm 457 mm 635 mm 324 mm
4,000 lb 4,000 lb 4,000 lb 4,000 lb 4,000 lb 4,000 lb 3000 lb 4,000 lb 700 lb per pallet
1 814 kg 1 814 kg 1 814 kg 1 814 kg 1 814 kg 1 814 kg 1 361 kg 1 814 kg 318 kg
5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8"
16 mm 16 mm 16 mm 16 mm 16 mm 16 mm 16 mm 16 mm 16 mm
4.92" 4.92" 4.92" 4.92" 4.92" 4.92" 4.375" 3.973" 4.92"
125 mm 125 mm 125 mm 125 mm 125 mm 125 mm 111 mm 100 mm 125 mm
#40 Taper #40 Taper #40 Taper #40 Taper #40 Taper #40 Taper #40 Taper #40 Taper #40 Taper
7,500 max rpm 7,500 max rpm 7,500 max rpm 7,500 max rpm 7,500 max rpm 7,500 max rpm 12,000 max rpm 12,000 max rpm 7,500 max rpm
Direct Speed Direct Speed Direct Speed Direct Speed Direct Speed Direct Speed Inline Inline Direct Speed
Belt Drive Belt Drive Belt Drive Belt Drive Belt Drive Belt Drive Direct Drive Direct Drive Belt Drive
75 ft-lb @ 1,400 75 ft-lb @ 1,400 75 ft-lb @ 1,400 75 ft-lb @ 1,400 75 ft-lb @ 1,400 75 ft-lb @ 1,400 75 ft-lb @ 2,100 75 ft-lb @ 2,100 75 ft-lb @ 1,400
102 Nm @ 1 400 102 Nm @ 1 400 102 Nm @ 1 400 102 Nm @ 1 400 102 Nm @ 1 400 102 Nm @ 1 400 102 Nm @ 2 100 102 Nm @ 2 100 102 Nm @ 1 400
250 ft-lb @ 450 250 ft-lb @ 450 250 ft-lb @ 450 250 ft-lb @ 450 250 ft-lb @ 450 250 ft-lb @ 450
339 Nm @ 450 339 Nm @ 450 339 Nm @ 450 339 Nm @ 450 339 Nm @ 450 339 Nm @ 450
Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection
Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled
20 hp 20 hp 20 hp 20 hp 20 hp 20 hp 30 hp 30 hp 20 hp
14.9 kW 14.9 kW 14.9 kW 14.9 kW 14.9 kW 14.9 kW 22.4 kW 22.4 kW 14.9 kW
(z=5,600 lb) 3,400 lb (z=5,600 lb) 3,400 lb (z=5,600 lb) 3,400 lb (z=5,600 lb) 3,400 lb (z=5,600 lb) 3,400 lb (z=5,600 lb) 3,400 lb (z=5,600 lb) 3,400 lb 5,600 lb (z=5,600 lb) 2,550 lb
(24 910 N) 15 124 N (24 910 N) 15 124 N (24 910 N) 15 124 N (24 910 N) 15 124 N (24 910 N) 15 124 N (24 910 N) 15 124 N (24 910 N) 15 124 N 24 910 N (24 910 N) 11 343 N
540 ipm 600 ipm 540 ipm 600 ipm 360 ipm 360 ipm 710 ipm 710 ipm 1,000 ipm
13.7 m/min 15.2 m/min 13.7 m/min 15.2 m/min 9.1 m/min 9.1 m/min 18.0 m/min 18.0 m/min 25.4 m/min
600 ipm 600 ipm 600 ipm 600 ipm 600 ipm 600 ipm 710 ipm 710 ipm 1,000 ipm
15.2 m/min 15.2 m/min 15.2 m/min 15.2 m/min 15.2 m/min 15.2 m/min 18.0 m/min 18.0 m/min 25.4 m/min
500 ipm 500 ipm 500 ipm 500 ipm 360 ipm 360 ipm 500 ipm 500 ipm 833 ipm
12.7 m/min 12.7 m/min 12.7 m/min 12.7 m/min 9.1 m/min 9.1 m/min 12.7 m/min 12.7 m/min 21.1 m/min
24+1 (40+1) 24+1 (40+1) 24+1 (40+1) 24+1 (40+1) 24+1 (40+1) 24+1 (40+1) 24+1 (40+1) 24+1 (40+1) 24+1 (40+1)
CT or BT / 40 CT or BT / 40 CT or BT / 40 CT or BT / 40 CT or BT / 40 CT or BT / 40 CT/40 CT/40 CT/40
3" / 6" 3" / 6" 3" / 6" 3" / 6" 3" / 6" 3" / 6" 3" / 6" 3" / 6" 3" / 6"
76 mm / 152 mm 76 mm / 152 mm 76 mm / 152 mm 76 mm / 152 mm 76 mm / 152 mm 76 mm / 152 mm 76 mm / 152 mm 76 mm / 152 mm 76 mm / 152 mm
12 lb 12 lb 12 lb 12 lb 12 lb 12 lb 12 lb 12 lb 12 lb
5.4 kg 5.4 kg 5.4 kg 5.4 kg 5.4 kg 5.4 kg 5.4 kg 5.4 kg 5.4 kg
SMTC SMTC SMTC SMTC SMTC SMTC SMTC SMTC SMTC
2.8 sec 2.8 sec 2.8 sec 2.8 sec 2.8 sec 2.8 sec 2.8 sec 2.8 sec 2.2 sec
3.6 sec 3.6 sec 3.6 sec 3.6 sec 3.6 sec 3.6 sec 3.6 sec 3.6 sec 4.8 sec
0.0003"3 0.0003"3 0.0003"3 0.0003"3 0.0003"3 0.0003"3 0.0002" 0.0002" 0.0002"
0.008 mm 0.008 mm 0.008 mm 0.008 mm 0.008 mm 0.008 mm 0.005 mm 0.005 mm 0.005 mm
0.0002"3 0.0002"3 0.0002"3 0.0002"3 0.0002"3 0.0002"3 0.0001" 0.0001" 0.0001"
0.005 mm 0.005 mm 0.005 mm 0.005 mm 0.005 mm 0.005 mm 0.003 mm 0.003 mm 0.003 mm
21,000 lb 23,000 lb 24,000 lb 25,000 lb 28,000 lb 29,400 lb 7500 lb 14,000 lb 14,000 lb
9 526 kg 10 433 kg 10 886 kg 11 340 kg 12 701 kg 13 336 kg 3 402 kg 6 350 kg 6 350 kg
4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 9 scfm, 100 psi
113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 4.25 lpm, 6.9 bar
200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC
380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC
NOTE: FLA/kVA requirements determined by motor horsepower. Check with your Haas distributor for various requirements. Differing VAC/kVA options available. Specifications subject to
change without notice. Not responsible for misprints or typographical errors.
37
Machine Specifications (Standard 50-Taper Machines)
VF-5/50VF-5/50 | VF-5/50XT
| VF-5/50XT VF-6/50
VF-6/50 VF-7/50
VF-7/50 VF-8/50
VF-8/50
XX 50" 50"
| 60"| 60" 64" 64" 84"84" 64"
64"
1 2701270
mm |mm | 1524
1 524 mmmm 1 6261626
mm mm 2134
2 134 mmmm 1626
1 626mm mm
YY 26"26" 32" 32" 32"32" 40"
40"
660660
mmmm 813 813
mm mm 813813
mmmm 1016mm
1016 mm
Travels
ZZ 25"25" 30" 30" 30"30" 30"
30"
635635
mmmm 762 762
mm mm 762762
mmmm 762mm
762 mm
SpindleNose
Spindle NosetotoTable
Table 7 - 32"
7 - 32" 5 - 35"
5 - 35" 5 -535"
- 35" 55- -35"
35"
178 - 813 mm 127 - 889 mm 127 - 889 mm 127 - 889 mm
178 - 813 mm 127 - 889 mm 127 - 889 mm 127 - 889 mm
Length
Length 52" 52" | 62"| 62" 64" 64" 84"84" 64"
64"
1 3211321
mm |mm 1 575| 1575 mmmm 1 6261626mm mm 2 134 2134mmmm 1 626mm
1626 mm
Width
Width 23"23" 28" 28" 28"28" 36"
36"
584584 mmmm 711 711mm mm 711711 mmmm 914mm
914 mm
MaxWeight
Max WeightononTable
Table 4,000 4,000lb lb 4,0004,000lb lb 4,0004,000lb lb 4,000lblb
4,000
Table 1 8141814 kg kg 1 8141814kg kg 1 814 kg
1814 kg
1 814 kg
1814 kg
T-SlotWidth
T-Slot Width 5/8"5/8" 5/8"5/8" 5/8" 5/8" 5/8"
5/8"
16 mm 16 mm 16 mm 16 mm
16 mm 16 mm 16 mm 16 mm
T-Slot Center Distance 3.15" 4.92" 4.92" 4.92"
T-Slot Center Distance 80 mm 3.15" 125 mm4.92" 125 mm 4.92" 4.92"
125 mm
80 mm 125 mm 125 mm 125 mm
TaperSize
Taper Size #50#50 Taper Taper #50 #50
TaperTaper #50#50 TaperTaper #50Taper
#50 Taper
Speed
Speed 7,5007,500
maxmax rpmrpm 7,5007,500
maxmax rpmrpm 7,500
7,500 maxmax rpmrpm 7,500
7,500max maxrpm rpm
Drive
DriveSystem
System 2-Speed2-Speed 2-Speed
2-Speed 2-Speed
2-Speed 2-Speed
2-Speed
GearedGeared Head Head Geared HeadHead
Geared Geared
Geared HeadHead GearedHead
Geared Head
MaxTorque
Max TorqueStandard
Standard 450 450
ft-lbft-lb
@ 500 @ 500 450 ft-lb @ 500
450 ft-lb @ 500 450450ft-lbft-lb
@@ 500500 450ft-lb
450 ft-lb@@500 500
Spindle 610 Nm @ 500 610 Nm610 @ Nm 500@ 500 610 Nm 610@Nm 500@ 500 610 Nm 610 @ 500 Nm @ 500 610 Nm @ 500 610 Nm @ 500
BearingLubrication
Bearing Lubrication Air/Oil Injection
Air/Oil Injection Air/Oil Injection
Air/Oil Injection Air/Oil Injection
Air/Oil Injection Air/OilInjection
Air/Oil Injection
Cooling
Cooling Liquid Cooled
Liquid Cooled LiquidLiquid
Cooled Cooled Liquid
LiquidCooled
Cooled LiquidCooled
Liquid Cooled
Spindle
SpindleMotor
MotorMaxMax Rating1
Rating1 30 hp 30 hp 30 hp 30 hp 30 30hphp 3030hphp
22.422.4 kWkW 22.422.4kW kW 22.422.4kWkW 22.4kW
22.4 kW
Axis Motors Max Thrust Rating 5,600 lb 5,600 lb (x=3,400 lb) 5,600 lb 5,600 lb
Axis Motors Max Thrust Rating 5,600 lb 5,600 lb (x=3,400 lb) 5,600 lb 5,600 lb
24 910 N N
24910 24 910 N N
24910 (15124
(15 124 N) 24N) 910
24910 NN 24910
24 910NN
Rapids
RapidsononX XAxis
Axis 710710 ipmipm 540 540ipm ipm 600600 ipmipm 540
540ipmipm
18.018.0m/min m/min 13.7 13.7
m/min m/min 15.215.2m/min
m/min 13.7m/min
13.7 m/min
Axis Motors
Rapids
RapidsononY Y& &Z Axes
Z Axes 710710 ipmipm 600 600ipm ipm 600600 ipmipm 600
600ipmipm
18.018.0m/min m/min 15.2 15.2
m/min m/min 15.215.2m/min
m/min 15.2m/min
15.2 m/min
MaxCutting
Max Cutting 500500 ipmipm 500 500ipm ipm 500500 ipmipm 500ipm
500 ipm
12.712.7m/min m/min 12.712.7
m/min m/min 12.712.7m/min
m/min 12.7m/min
12.7 m/min
Capacity
CapacityStandard
Standard 30+130+1 30+130+1 30+1 30+1 30+1
30+1
Tool Type / Taper CT or BT / 50 CT or BT / 50 CT or BT / 50 CT or BT / 50
Tool Type / Taper CT or BT / 50 CT or BT / 50 CT or BT / 50 CT or BT / 50
Max Tool Diameter Standard 4" / 7" 4" / 10" 4" / 10" 4" / 10"
Max Tool Diameter Standard 4" / 7" 4" / 10" 4" / 10" 4" / 10"
(full
(full/ /adjacent
adjacentempty)
empty) 102 mm / 178 mmmm
102 mm / 178 102 mm / 254 mm mm
102 mm / 254 102 mm / 254 mmmm
102 mm / 254 102
102 mm / 254mm
mm / 254 mm
Tool Changer Max Tool Weight
Max Tool Weight 30 lb
30 lb
30 lb
30 lb
30 lb
30 lb 30 lb
30 lb
13.613.6 kg kg 13.613.6kg kg 13.613.6kg kg 13.6
13.6kgkg
Changer
ChangerType
TypeStandard
Standard SMTC SMTC SMTC SMTC SMTC SMTC SMTC
SMTC
Tool to Tool (avg) 4.2 sec 4.2 sec 4.2 sec 4.2 sec
Tool to Tool (avg) 4.2 sec 4.2 sec 4.2 sec 4.2 sec
Chip to Chip (avg) 6.3 sec 6.3 sec 6.3 sec 6.3 sec
Chip to Chip (avg) 6.3 sec 6.3 sec 6.3 sec 6.3 sec
Positioning 0.0002" 0.0003"2 0.0003"2 0.0003"2
Positioning 0.005 mm
0.0002" 0.0082 mm
0.0003" 0.008 mm
0.0003" 2 0.008 mm 2
0.0003"
Accuracy Repeatability 0.0050.0001"
mm 0.0080.0002"2
mm 0.008 mm
0.0002"2 0.008
0.0002"2 mm
Repeatability 0.0001"
0.003 mm 0.0052 mm
0.0002" 0.0002"
0.005 mm 2 mm 2
0.0002"
0.005
Machine Weight 16,1000.003 mm lb
lb | 16,650 0.00522,500
mm lb 0.005 mm lb
24,500 0.005
25,500 mm lb
Machine Weight 16,100 lb | 16,650 lb kg
7303 kg | 7552 22,500 lb kg
10206 11113lb kg
24,500 11567
25,500kglb
Air Required 7 303 kg4 |scfm,
7 552100 kg psi 410scfm,
206100 kg psi 4 scfm,
11 113100kgpsi 4 scfm,11100 567psikg
Miscellaneous Air Required 113 lpm,
4 scfm, 100 6.9 psi bar 113 lpm,
4 scfm, 100 psi 6.9 bar 113 lpm,
4 scfm, 1006.9 psibar 113 lpm, 6.9
4 scfm, 100barpsi
Power Required (min) 113 lpm,
2006.9 - 250 barVAC 113 lpm,2006.9
- 250barVAC 113 lpm,
200 -6.9 250bar VAC 113
200lpm,
- 2506.9VACbar
Power Required (min) 200 380
- 250- 480 VACVAC 200 -380
250- 480
VACVAC 200380- 250 VAC
- 480 VAC 200- -480
380 250VAC VAC
380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC
38
VF-9/50
VF-9/50 VF-10/50
VF-10/50 VF-11/50
VF-11/50 Through-Spindle Coolant Options
84"84" 120"120" 120"120" 8.0
2134
2 134 mmmm 3 0483048
mmmm 30483 048mmmm
7.0
Volume (GPM)
40"40" 32"32" 40"40"
1 016 mmmm
1016 813813
mmmm 10161 016mmmm 6.0
NOTE: FLA/kVA requirements determined by motor horsepower. Check with your Haas distributor for various requirements. Differing VAC/kVA options available.
Specifications subject to change without notice. Not responsible for misprints or typographical errors.
Some items shown in this brochure are optional. Please contact your local distributor for assistance.
39
Worldwide Support
machine
European headquarters & showroom with
inventory and spare parts
distribution center (Brussels)
machine
Asian headquarters & showroom with
inventory and spare parts
distribution center (Shanghai) More than $50,000,000 in spare parts are stocked at 160 locations worldwide.
Head Office, California, USA European Headquarters, Brussels, Belgium Asian Headquarters, Shanghai, China
Our network of dedicated Haas Factory Outlets provides local attention to detail, fully stocked service vans, and the training and backing of an international organization.
In total, more than $50,000,000 in spare parts are stocked at 160 locations worldwide. Local parts inventories are supported by overnight availability from main headquarters.
39-906035