mounting plate, drill the holes according to the pattern.
Filling of the holes to rectangular shape and
use sand paper to smoothen the surface.
Center-punching for the screw holes.
Drilling of holes for the screw after making center-punching.
Clamp the mounting plate to the position that
ease our bending process. The bending process is by manually because the shape of the mounting plate restraint the function of bending machine. After doing the bending process, punch the surface of the plate with hammer and wood to make it flat as 900.
Moulding the cylindrical shape on piece of
wood that use to make beading in later steps. Punching the mounting plate on the wood with cylindrical shape in order to produce the half cylindrical shape of beading.
Welding of material on the bottom of the
mounting plate to ease the later step of bending of the curve at the bottom. Bending of the curve at the bottom of mounting plate. Final Product Overview
Figure 4: Front view of final product
Figure 5: Side view of final product Figure 6: Top view of final product