Auto-ON/Auto-OFF and
Manual-ON/Auto-OFF modes
No additional wiring required
No external power required
Self-powered occupancy sensor
Features small range adjustment
on occupancy sensor technology
Walk-thru feature
Simple, fast installation
Ceiling mount
WSC04-I0x WSC15-I0x
DESCRIPTION respond to any source of heat within the range
The Leviton line of Wireless Occupancy Sensors of detection, including the heat emitted by the
(WSCxx-I0W) work in conjunction with the human body, however, the sensor is only triggered
Wireless Wall Switch Receiver (WSS10-xDx) when the source of heat moves from one zone
and the Wireless Self-Powered Remote Switch of sensing to another. Stationary heat sources
(WSS0S-P0x). These wireless products combine will not trigger the sensor.
Levitons occupancy sensing technology with
self-powered and wireless technologies, APPLICATIONS
developed and licensed from EnOcean. Levitons line of Wireless products are the ideal
solution for retrofits and new construction,
The Wireless Occupancy Sensors have a built-in
installation is quick and easy with no additional
solar cell that draws on available room light
wiring required. Simply replace the existing
to power itself and can operate for up to 48
wall switch with Levitons Wireless Wall Switch
hours without the need for batteries or external
Receiver, attach the occupancy sensor and the
power in standard manual-ON/Auto-OFF mode.
installation is complete.
Batteries are required for continuous uninter-
rupted Auto-ON operation. Retrofits New construction
The sensors use a small detector located directly Conference rooms Classrooms
behind a unique multi-zone optical lens. This Private offices Executive offices
exclusive Fresnel lens establishes dozens of
Restrooms Daycare facilities
zones of detection, which can be configured
(manual masking) to block out unwanted traffic
zones (i.e. outside hallway traffic). The sensors
FEATURES
No Additional Wiring: Wireless Occupancy Sensors Up to 48 Hours of Stored Power: solar panel
communicate with the Wall Switch Receiver and provides up to 48 hours of power to the occupancy
Self-Powered Remote Switch via wireless technol- sensor when no ambient light is available
ogy, eliminating the need to pull any additional wire Exclusive Walk-Thru Feature: provides increased
Auto-ON and Manual-ON Options: occupancy energy savings by not leaving the lights on for an
sensors are shipped in Manual-ON/Auto-OFF default extended period after momentary occupancy
mode from the factory. Three AAA batteries are All Digital Circuitry: uses minimum components
required to enable the continuously uninterrupted for maximum reliability and low cost
Auto-ON/Auto-OFF mode
FIELD-OF-VIEW DIMENSIONS
ENVIRONMENTAL
Operating
32F to 104F (0C to 40C) WSC15 Field of View (in feet) 1.27
Temperature Range 1.08
1.27
TOP VIEW 1.08
Storage 20
32F to 104F (0C to 40C)
Temperature Range
Relative humidity 0% to 95%, non-condensing 10
2.70 2.70
SIDE VIEW
Usage Indoors only SIDE VIEW
OTHER
10
ordering information
WSC04-I0x WSC15-I0x
0
1.27
Cat. no. description
20 15 11 9 5.6 3 0 3 5.6 9 11 15 20
1.08
WSC04-I0W Wireless Self-Powered PIR Occupancy Sensor, WSC04 Field of View (in feet)
450SF 12
TOP VIEW
2.70
1500SF
5
12 9 7 5 3 0 3 5 7 9 12
FRONT VIEW BACK VIEW