Anda di halaman 1dari 1

Product / Project sheet

Umbilical winch

Technical specifications
Winch data
Line pull 1st layer 13.5t
Line speed 1st layer 32.5m/min
Umbilical diameter 139mm
Storage capacity 600m

Umbilical/slipring data
Completely assembled and ready for use Connections: 39x 3000V
18x 1000V
Application 22x control
This umbilical winch is built client-specific for 6x fibre optic
the purpose of providing power and control to
a subsea trencher device. Features / Innovations
Fully closed inner drum for keeping sea air
The winch consists out. Door in drum to enter slip ring area.
of a spooling drum, a Spooling device with protected diamond
spooling device for shaft design.
correct spooling of
the umbilical and a
slip ring inside the
drum for connecting
all electric and
optical lines to the
ships deck.

The winch is driven


through an open
gear and pinion on a planetary gearbox.

The 600m umbilical is one of the biggest and


most complex umbilicals in the world. It has
a connector which is mounted on the lead-in
of the drum. This lead-in is then closed to
minimise the wear on the umbilical and with
also to maximise its life span.
Lead-in of umbilical to the slip ring unit
The winch is designed with simplicity and
minimal fabrication time in mind as the winch
was required to be delivered to a very tight
schedule.

For more information contact Innovative Input BV, phone +31 180 545499, website: www.innovativeinput.nl

Version: 20100621

Anda mungkin juga menyukai