The Cooling Air Analysis module (CAA) damage in the stator winding area. PD
consists of two independent sub-modules, produces ozone and its concentration can be
the “hotspot-detection” (HS) and the measured by taking air samples from the
“ozone diagnosis” (O3). Both modules are generator cooling air circuit.
based on similar measurement methods: air
samples are taken from the generator cooling The advantage of this method is:
air circuit allowing measurement of the con- ● the simplicity of the installation (only
materials under certain conditions. The air ● the dielectric monitoring of the entire
samples are transferred through Teflon® winding system with one single
hoses to suitable analyzers, which determine measuring-point.
the concentration of the particular gas.
The results are transmitted to the DIA TECH Scheme of Cooling Air Analysis
system for further diagnostic processing.
left: ozone analyzer, middle: example of DIA TECH Trend display, right: pneumatic MUX