(User Manual)
SW-ADU-555C-UG-V2.0
Dec 15. 2009
MBlaze USB Modem (User Manual)
Contents
1. Safety Precautions ..................................................................................................................................3
4. Getting Started.........................................................................................................................................5
5. LED Indicators (In Modem Mode) ..........................................................................................................5
5.1 POWER...............................................................................................................................................5
5.2 IDLE ....................................................................................................................................................5
5.3 BUSY ..................................................................................................................................................5
6. Program Installation................................................................................................................................6
8. Troubleshooting ....................................................................................................................................17
2/18
MBlaze USB Modem (User Manual)
1. Safety Precautions
2. Before Usage
Interface USB1.1
3/18
MBlaze USB Modem (User Manual)
3. Basic Usage
Status LED
USB Connector
Connect to PC to use
4/18
MBlaze USB Modem (User Manual)
4. Getting Started
5.1 POWER
Mode Descriptions
RED Power On
5.2 IDLE
Mode Descriptions
5.3 BUSY
Mode Descriptions
5/18
MBlaze USB Modem (User Manual)
6. Program Installation
You should be able to see “AnyDATA CDMA USB Modem” and “AnyDATA CDMA USB Serial Device”,
the driver has been successfully installed.
6/18
MBlaze USB Modem (User Manual)
You should be able to see “AnyDATA CDMA USB Modem” and “AnyDATA CDMA USB Serial Device”,
the driver has been successfully installed.
You should be able to see “AnyDATA CDMA USB Modem” and “AnyDATA CDMA USB Serial Device”,
the driver has been successfully installed.
7/18
MBlaze USB Modem (User Manual)
8/18
MBlaze USB Modem (User Manual)
9/18
MBlaze USB Modem (User Manual)
Display Function
RCV/STV Activation
Setup Menu
Help Menu
Display Function
RSSI Signal Strength Indicator
USB connected
Roaming
Connected to the Modem
Either the cable is disconnected to the modem
Or improper port connection.
10/18
MBlaze USB Modem (User Manual)
Internet connected
Internet disconnected
To change the value, check wanted item box to confirm and then press button to save it to memory.
1) [About]: Version information
11/18
MBlaze USB Modem (User Manual)
- This is very important parameter, it is strongly recommended to keep the default values.
- Hybrid: The modem latches with CDMA Broadband network. If at some point of time, the
broadband signals are not available, the modem falls back to CDMA 1x signals without
interruption.
- Broadband: The modem latches with CDMA Broadband network. If at some point of time, the
broadband signals are not available, the modem disconnects and needs manual connection again.
- 1x: The modem latches with CDMA 1x network. If at some point of time, the 1x signals are not
available, the modem disconnects and needs manual connection again.
12/18
MBlaze USB Modem (User Manual)
- Always Top: The program window will be displayed on the top of all other open applications.
If connection succeeds, icon will appear. If failed to connect, icon will appear.
13/18
MBlaze USB Modem (User Manual)
<Remark>:
Theses functions can be used only when 1x or Hybrid mode is selected in settings.
14/18
MBlaze USB Modem (User Manual)
<Remark>:
Theses functions can be used only when 1x or Hybrid mode is selected in settings.
15/18
MBlaze USB Modem (User Manual)
<Remark>:
Theses functions can be used only when 1x or Hybrid mode is selected in settings.
16/18
MBlaze USB Modem (User Manual)
<Remark>:
The latest MBlaze software can be downloaded from MTS web site (www.mtsindia.in/mblaze).
Before proceeding for a fresh installation, please Uninstall the MBlaze / MBrowse applicati
on if already installed. Preferred way for complete uninstall is to choose “Uninstall” from t
he All Programs listing in Start Menu. Other option is through control panel.
8. Troubleshooting
Q: After the installation of the program, the program does not run and displays following
message
17/18
MBlaze USB Modem (User Manual)
A: This means that USB modem and the computer are not connected properly OR the Slider switch on
the modem is not in Modem position. Please double check.
Q: During the running of the program, following message appears and the program halts.
A: The actual connection of USB modem and computer has been disconnected. Please check whether
the cable is dismounted, cable is disconnected or USB modem power has been turned off. Then try to
reconnect the modem.
Q: The program has ended but the USB modem power is turned off.
A: The power of USB modem is not controlled by the program. The point USB modem turns on
automatically is when USB is connected to the PC/Notebook.
Q: MBlaze USB Modem program displays “DB xxxx Error” message and terminates.
A: MBlaze USB Modem program uses mdb format type of database file. This type of format is
preinstalled when using Windows XP, Windows 2000 OS in a computer. However, this type of
database file has been removed by some other program.
Need to update following two (2) files from Microsoft site:
1. MDAC: <http://www.microsoft.com/downloads/details.aspx?FamilyID=6c050fe3-c795-4b7d-
b037-185d0506396c&DisplayLang=en>
2. Jet Engine 4.0:
http://www.microsoft.com/downloads/details.aspx?FamilyID=2deddec4-350e-4cd0-a12a-
d7f70a153156&DisplayLang=en
18/18