American Water Works Association

AWWA C200-97: Steel Water Pipe-6 In. (150 mm) and Larger
AWWA C203-02: Coal-Tar Protective Coatings & Linings for Steel Water Pipelines, Enamel & Tape, Hot-pap.
(Incl. add. C203a-99)
AWWA C205-00: Cement-Mortar Protective Lining and Coating for Steel Water Pipe- 4 In. (100 mm) and
Larger-Shop paplin
AWWA C206-97: Field Welding of Steel Water Pipe
AWWA C207-01: Steel Pipe Flanges for Waterworks Service- Sizes 4 In. Through 144 In. (100 mm through
3,600 mm)
AWWA C208-01: Dimensions for Fabricated Steel Water Pipe Fittings
AWWA C209-00: Cold-paplied Tape Coatings for the Exterior of Special Sections, Connections, and Fittings for
Steel Water Pipe
AWWA C210-97: Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines
AWWA C213-01: Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines
AWWA C214-00: Tape Coating Systems for the Exterior of Steel Water Pipelines
AWWA C215-99: Extruded Polyolefin Coatings for the Exterior of Steel Water Pipelines
AWWA C216-00: Heat-Shrinkable Cross-Linked Polyolefin Coatings for the Exterior of Special Sections,
Connections and Fitting
AWWA C217-99: Cold-paplied Tape Coatings for Ext. Spec. Sect., Conn., and Fittings for Buried/Submerged
Steel Water Pipelines
AWWA C218-02: Coating the Exterior of Aboveground Steel Water Pipelines and Fittings
AWWA C219-01: Bolted, Sleeve-Type Couplings for Plain-End Pipe
AWWA C220-98: Stainless-Steel Pipe, 4 In. (100 mm) and Larger (Includes addendum C220a-99)
AWWA C221-01: Fabricated Steel Mechanical Slip-Type Expansion Joints
AWWA C222-99: Polyurethane Coatings for the Interior and Exterior of Steel Water Pipe and Fittings
AWWA C223-02: Fabricated Steel and Stainless Steel Tapping Sleeves
AWWA C224-01: Two-layer Nylon-11 Based Polyamide Coating System for Interior and Exterior of Steel Water
Pipe and Fittings
AWWA C225-03: Fused Polyolefin Coating Systems for the Exterior of Steel Water Pipelines

www.sanyosteel.com