Version 25/10/2007
Description Sika MonoTop -610 is a one component, cementitious, polymer modified
slurry containing Silica fume and corrosion inhibitors.
Advantages - One component system requiring only the addition of clean water.
- Easily applied by brush, roller or spray
- Excellent bonding to steel and concrete
- Highly impermeable to water and chlorides.
- Can be applied to damp substrates.
- High mechanical strengths.
- Non-toxic.
- Alkaline passivating effect due to high cement content.
- Contains corrosion inhibitors.
As bonding bridge :
o
Pot Life (30 C) approx 20 minutes Apply by brush, roller or suitable spraying equipment to the prepared
(wetted to saturated surface dry) substrate. To achieve a good bond with the
Shelf Life 12 months in original packing substrate, and to make sure that the whole area is fully coated with the
bonding slurry it has to be rubbed well into the substrate.Following repair
Storage Condition Store in a dry place mortars have to be applied to the wet bonding slurry.
Packaging 20 kg bags Consumption For 1 litre of Fresh Mortar approx. 1.65 kg of powder are needed.
As bonding slurry :
Handling Precautions Sika MonoTop -610 contains cement and is alkaline. Suitable precautions should
Depending on substrate condition,
be taken to minimise direct contact with the skin. Should the material enter
approx. 1.5-2.0 kg/m2 dry mortar (powder)
the eyes, rinse immediately with clean water and seek medical attention.
As anticorrosion coating on reinforcement :
approx. 3.5 kg/m2 dry mortar (powder) for 2 coats at 1 mm dry film thickness
Instruction For Use High quality, long term repairs can only be achieved if they are carried out
each.
conscientiously by experienced applicators giving adequate attention to details
relating to surface preparation, priming of concrete and steel, mixing of repair
mortars, application and curing.
Surface Preparation Precise and efficient surface preparation is essential to achieve the high
adhesive qualities of Sika MonoTop -610
Concrete : Must be sound, clean and free of loose or weak particles, dust and dirt.
In particular, oil and wax containing layers as well as laitance must be completly
removed. The prepared surface should be dampened down with clean water.